Flash Player 10.1 doesn't remember volume setting, defaults to MAX

Hi, since updating to Flash Player
10.1, all flash videos now default to max volume, whereas before it would remember the last volume setting from video to video.
How do I get the player to remember the volume setting, or how may I download an earlier version?
I have Vista 64-bit running 32-bit Internet Explorer 8.0.6001.18943 and 32-bit Firefox 3.6.10. The problem is present in both browsers.
It's a freakin' pain to remember to quickly turn down the sound on every single video I watch before I get blown out.

Hello Forum Users et al,
I know this Updated Post follows shortly after my previous post, but I have a useful piece of info. that others may wish to check on.
I have been using a video: www.video.com/12348372 as my test case for which the video comes on and then proceeds to not work. If I click on the "arrow" in the bottom left corner of the video, the video screen goes "black" and nothing happens immediately. But, here is the important information. If I wait, then the video reappears, but sounds alternately starts and stops.
What I did for the last several hours was to minimize the email containing the video, and I noticed that the sound alternately came on and off. But, after over two hours, the video started to play normally (total time for video is about 4 mins.) When it gets to the end, the original "start arrow" appears. I have repeatedly played this video after the two-hour period of erratic play, and it played normally.
This event happened one time over a week ago when I was on "Live Chat" with Adobe FP. I was reporting my problem with FP with Mang Son while I had the video minimized, and, embarrassingly, the video started to work normally! What could I say?! I told him essentially that it looked like it was working, and I closed it out. However, after this, I closed the email containing the video and tried to open the video from scratch, again. Once again, it started to play erratically, even though it mysteriously was playing normally while I was on "Live Chat".
Users may want to use the video that I cited and see what happens. It is still a mystery why the video won't work for hours and then all of a sudden start working. I also had similar trouble with YouTube videos.
Best regards,
bookwilliam

Similar Messages

Why the hell ADOBE FLASH PLAYER 10.2 DOESN'T WORK on Firefox 4???

Adobe Flash Player 10.2 doesn't work on firefox 4. I downloaded 10 times, I installed and again, "Please install ADOBE FLASH PLAYER"

You appear to have it installed twice. Your system specs show you have both Shockwave Flash 9.0 r28 and Shockwave Flash 10.2 r159 installed.
What I suggest you do here is to uninstall Flash using Adobe's uninstaller which you can download from here: [http://download.macromedia.com/pub/flashplayer/current/uninstall_flash_player.exe uninstall_flash_player.exe]
Close Firefox before you run the uninstaller, then reboot.
Then manually install Flash using this file: [http://fpdownload.adobe.com/get/flashplayer/current/install_flash_player.exe install_flash_player.exe] Close Firefox again before you run it.

. I've updated my flash player. That doesn't seem to fix it.

When I attach a file or photo to a mac mail message, I get a blocked plug-in message. I've updated my flash player, but that doesn't help. How do I get my mail to show the file I've attached?

Post the message or screenshot of the dialog box.
27" i7 iMac (Mid 2011) refurb, OS X Yo (10.10.1), Mavs, ML & SL, G4 450 MP w/10.5 & 9.2.2>

USB flash disk is not mounting, Xfce doesn't remember the setting

Hello,
I'm new in Archlinux and I think I can't set up it well. I use Linux for four years /Ubuntu, Debian/.
Now I have installed system with X server, Slim and Xfce.
1/ I have one big problem. I want to automount my flashdisk but it doesn't work like in Debian. I don't know what is wrong. When I put my flashdisk to USB, it's blinkig but nothing else happened. But I see the flashdisk in lsusb
[root@arch martin]# lsusb
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 003: ID 04d9:048e Holtek Semiconductor, Inc. Optical Mouse
Bus 001 Device 003: ID 1005:b113 Apacer Technology, Inc. Handy Steno 2.0/HT203
2/ Xfce doesn't remember the settings... When I log out and log in again, the panel, desktop and keyboard have the default settings all the time.
3/ All is in english. I'm from Czech Republic /excuse my bad english/ and I want to have applications in czech language. I've set up and generated locales but nothing happened...
Thank you a lot to solve those problems!!
Some files...
rc.conf
# /etc/rc.conf - Main Configuration for Arch Linux
# LOCALIZATION
# LOCALE: available languages can be listed with the 'locale -a' command
# DAEMON_LOCALE: If set to 'yes', use $LOCALE as the locale during daemon
# startup and during the boot process. If set to 'no', the C locale is used.
# HARDWARECLOCK: set to "", "UTC" or "localtime", any other value will result
# in the hardware clock being left untouched (useful for virtualization)
# Note: Using "localtime" is discouraged, using "" makes hwclock fall back
# to the value in /var/lib/hwclock/adjfile
# TIMEZONE: timezones are found in /usr/share/zoneinfo
# Note: if unset, the value in /etc/localtime is used unchanged
# KEYMAP: keymaps are found in /usr/share/kbd/keymaps
# CONSOLEFONT: found in /usr/share/kbd/consolefonts (only needed for non-US)
# CONSOLEMAP: found in /usr/share/kbd/consoletrans
# USECOLOR: use ANSI color sequences in startup messages
LOCALE="cs_CZ.utf8"
DAEMON_LOCALE="no"
HARDWARECLOCK="localtime"
TIMEZONE="Europe/Prague"
KEYMAP="cz-qwertz"
CONSOLEFONT="lat2-16"
CONSOLEMAP="8859-2"
USECOLOR="yes"
# HARDWARE
# MODULES: Modules to load at boot-up. Blacklisting is no longer supported.
# Replace every !module by an entry as on the following line in a file in
# /etc/modprobe.d:
# blacklist module
# See "man modprobe.conf" for details.
MODULES=(nvidia)
# Udev settle timeout (default to 30)
UDEV_TIMEOUT=30
# Scan for FakeRAID (dmraid) Volumes at startup
USEDMRAID="no"
# Scan for BTRFS volumes at startup
USEBTRFS="no"
# Scan for LVM volume groups at startup, required if you use LVM
USELVM="no"
# NETWORKING
# HOSTNAME: Hostname of machine. Should also be put in /etc/hosts
HOSTNAME="arch"
# Use 'ip addr' or 'ls /sys/class/net/' to see all available interfaces.
# Wired network setup
# - interface: name of device (required)
# - address: IP address (leave blank for DHCP)
# - netmask: subnet mask (ignored for DHCP) (optional, defaults to 255.255.255.0)
# - broadcast: broadcast address (ignored for DHCP) (optional)
# - gateway: default route (ignored for DHCP)
# Static IP example
#interface=eth0
#address=192.168.0.2
#netmask=255.255.255.0
#broadcast=192.168.0.255
#gateway=192.168.0.1
# DHCP example
interface=eth0
address=
netmask=
gateway=
#interface=
#address=
#netmask=
#broadcast=
#gateway=
# Setting this to "yes" will skip network shutdown.
# This is required if your root device is on NFS.
NETWORK_PERSIST="no"
# Enable these netcfg profiles at boot-up. These are useful if you happen to
# need more advanced network features than the simple network service
# supports, such as multiple network configurations (ie, laptop users)
# - set to 'menu' to present a menu during boot-up (dialog package required)
# - prefix an entry with a ! to disable it
# Network profiles are found in /etc/network.d
# This requires the netcfg package
#NETWORKS=(main)
# DAEMONS
# Daemons to start at boot-up (in this order)
# - prefix a daemon with a ! to disable it
# - prefix a daemon with a @ to start it up in the background
# If something other takes care of your hardware clock (ntpd, dual-boot...)
# you should disable 'hwclock' here.
DAEMONS=(hwclock syslog-ng dbus udev evdev network netfs crond slim)
eth0="dhcp"
INTERFACES=(eth0)
ROUTES=(!gateway)
/etc/X11/xinit/xinitrc
#!/bin/sh
userresources=$HOME/.Xresources
usermodmap=$HOME/.Xmodmap
sysresources=/etc/X11/xinit/.Xresources
sysmodmap=/etc/X11/xinit/.Xmodmap
# merge in defaults and keymaps
if [ -f $sysresources ]; then
xrdb -merge $sysresources
fi
if [ -f $sysmodmap ]; then
xmodmap $sysmodmap
fi
if [ -f "$userresources" ]; then
xrdb -merge "$userresources"
fi
if [ -f "$usermodmap" ]; then
xmodmap "$usermodmap"
fi
# start some nice programs
if [ -d /etc/X11/xinit/xinitrc.d ] ; then
for f in /etc/X11/xinit/xinitrc.d/* ; do
[ -x "$f" ] && . "$f"
done
unset f
fi
#twm &
#xclock -geometry 50x50-1+1 &
#xterm -geometry 80x50+494+51 &
#xterm -geometry 80x20+494-0 &
#exec xterm -geometry 80x66+0+0 -name login
exec ck-launch-session startxfce4
/etc/slim.conf
# Path, X server and arguments (if needed)
# Note: -xauth $authfile is automatically appended
default_path /bin:/usr/bin:/usr/local/bin
default_xserver /usr/bin/X
xserver_arguments -nolisten tcp vt07
# Commands for halt, login, etc.
halt_cmd /sbin/shutdown -h now
reboot_cmd /sbin/shutdown -r now
console_cmd /usr/bin/xterm -C -fg white -bg black +sb -T "Console login" -e /bin/sh -c "/bin/cat /etc/issue; exec /bin/login"
#suspend_cmd /usr/sbin/suspend
# Full path to the xauth binary
xauth_path /usr/bin/xauth
# Xauth file for server
authfile /var/run/slim.auth
# Activate numlock when slim starts. Valid values: on|off
numlock on
# Hide the mouse cursor (note: does not work with some WMs).
# Valid values: true|false
# hidecursor false
# This command is executed after a succesful login.
# you can place the %session and %theme variables
# to handle launching of specific commands in .xinitrc
# depending of chosen session and slim theme
# NOTE: if your system does not have bash you need
# to adjust the command according to your preferred shell,
# i.e. for freebsd use:
# login_cmd exec /bin/sh - ~/.xinitrc %session
#login_cmd exec /bin/bash -login ~/.xinitrc %session
login_cmd exec ck-launch-session startxfce4
# Commands executed when starting and exiting a session.
# They can be used for registering a X11 session with
# sessreg. You can use the %user variable
# sessionstart_cmd some command
# sessionstop_cmd some command
# Start in daemon mode. Valid values: yes | no
# Note that this can be overriden by the command line
# options "-d" and "-nodaemon"
# daemon yes
# Available sessions (first one is the default).
# The current chosen session name is replaced in the login_cmd
# above, so your login command can handle different sessions.
# see the xinitrc.sample file shipped with slim sources
sessions xfce4,icewm,wmaker,blackbox
# Executed when pressing F11 (requires imagemagick)
screenshot_cmd import -window root /slim.png
# welcome message. Available variables: %host, %domain
welcome_msg Welcome to %host
# Session message. Prepended to the session name when pressing F1
# session_msg Session:
# shutdown / reboot messages
shutdown_msg The system is halting...
reboot_msg The system is rebooting...
# default user, leave blank or remove this line
# for avoid pre-loading the username.
default_user martin
# Focus the password field on start when default_user is set
# Set to "yes" to enable this feature
#focus_password no
# Automatically login the default user (without entering
# the password. Set to "yes" to enable this feature
#auto_login no
# current theme, use comma separated list to specify a set to
# randomly choose from
#current_theme default
current_theme archlinux-darch-white
# Lock file
lockfile /var/lock/slim.lock
# Log file
logfile /var/log/slim.log
locale -a
[root@arch martin]# locale -a
C
POSIX
cs_CZ.utf8
en_US
en_US.iso88591
en_US.utf8
Last edited by Zelva (2011-09-05 18:19:15)

With xfce4 I use .....mount /dev/sd(xx) /mnt/md...
Setup .../mnt/md in /mnt with ..cd /mnt...mkdir /mnt/md
This will mount the flash drive.
I do not know automount for xfce4.

Adobe Flash Player ActiveX deployment doesn´t work in SCCM 2012 R2

I´ve created an Application to deploy Adobe Flash Player 15.0.0.189 (last version). I´ve tried to deploy with the msi downloaded from Adobe site, using Powershell App Deploy Toolkit, bat script.. but nothing seems to work 100%.
I have 2500 computers in my company. Working with SCCM 2012 R2.
Some computers doesn´t install;
Some install it but Internet Explorer seems to loose this configuration and doesn´t open flash videos;
Some install but doesn´t uinstall the last version, then you can see two diferent versions installed;
Do you have a definitive solution to deploy Adobe Flash Player via SCCM?
Paz e Bem

Follow the log:
=O====== M/15.0.0.189 2014-10-24+13-20-52.308 ========
0000 [I] 00000010 C:\WINDOWS\SysWOW64\Macromed\Flash\FlashUtil32_15_0_0_189_Plugin.exe -uninstall plugin -msi
0001 [W] 00001036 Software\Macromedia\FlashPlayerPlugin/PlayerPath 2
0002 [W] 00001018
0003 [W] 00001036 SOFTWARE\MozillaPlugins\@adobe.com/FlashPlayer/ 2
0004 [W] 00001037 SOFTWARE\MozillaPlugins\@adobe.com/FlashPlayer/ 2
0005 [W] 00001037 SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\Adobe Flash Player Plugin/ 2
0006 [W] 00001019
0007 [W] 00001020
0008 [W] 00001037 Software\Microsoft\Windows\CurrentVersion\RunOnce/FlashPlayerUpdate 2
0009 [W] 00001037 Software\Macromedia\FlashPlayerPlugin/ 2
0010 [W] 00001037 Software\Macromedia\FlashPlayer/SwfInstall 2
0011 [W] 00001037 Software\Macromedia\FlashPlayerPluginReleaseType/ 2
0012 [W] 00001021
0013 [W] 00001036 Software\Macromedia\FlashPlayerActiveX/PlayerPath 2
0014 [W] 00001036 Software\Macromedia\FlashPlayerPlugin/PlayerPath 2
0015 [W] 00001036 Software\Macromedia\FlashPlayerPepper/PlayerPath 2
0016 [W] 00001037 Software\Microsoft\Windows\CurrentVersion\Control Panel\Extended Properties\System.ControlPanel.Category/C:\WINDOWS\SysWOW64\FlashPlayerCPLApp.cpl 2
0017 [W] 00001048
0018 [I] 00000020 C:\WINDOWS\SysWOW64\FlashPlayerCPLApp.cpl
0019 [W] 00001036 Software\Macromedia\FlashPlayerActiveX/PlayerPath 2
0020 [W] 00001036 Software\Macromedia\FlashPlayerPlugin/PlayerPath 2
0021 [W] 00001036 Software\Macromedia\FlashPlayerPepper/PlayerPath 2
0022 [W] 00001037 SOFTWARE\Microsoft\Windows NT\CurrentVersion\Image File Execution Options\\FlashPlayerApp.exe/ 2
0023 [W] 00001037 Software\Microsoft\Windows\CurrentVersion\Control Panel\Extended Properties\System.ControlPanel.Category/C:\WINDOWS\SysWOW64\FlashPlayerCPLApp.cpl 2
0024 [W] 00001036 Software\Macromedia\FlashPlayerActiveX/PlayerPath 2
0025 [W] 00001036 Software\Macromedia\FlashPlayerPlugin/PlayerPath 2
0026 [W] 00001036 Software\Macromedia\FlashPlayerPepper/PlayerPath 2
0027 [W] 00001036 Software\Mozilla\Firefox\extensions/Plugins 2
0028 [W] 00001036 Software\Opera Software/Last CommandLine 2
0029 [W] 00001036 Software\Opera Software/Last CommandLine 2
0030 [W] 00001036 Software\Opera Software/Plugin Path 2
0031 [W] 00001036 Software\Opera Software/Plugin Path 2
0032 [W] 00001015 C:\WINDOWS\SysWOW64\Macromed\Flash\FlashUtil32_15_0_0_189_Plugin.exe 5
0033 [W] 00001015 C:\WINDOWS\SysWOW64\Macromed\Flash\FlashUtil32_15_0_0_189_Plugin.exe 5
0034 [W] 00001037 SOFTWARE\Microsoft\Windows NT\CurrentVersion\Image File Execution Options\\FlashUtil32_15_0_0_189_Plugin.exe/ 2
0035 [I] 00000011 1
0036 [I] 00000012
=X====== M/15.0.0.189 2014-10-24+13-20-52.651 ========
=O====== M/13.0.0.214 2014-10-24+13-22-30.648 ========
0000 [I] 00000010 "\\rio1install01\install$\Aplications\Adobe\uninstall_flash_player_activex.exe" -force
0001 [W] 00001036 Software\Macromedia\FlashPlayerPlugin/PlayerPath 2
0002 [W] 00001036 Software\Macromedia\FlashPlayerActiveX/PlayerPath 2
0003 [W] 00001036 Software\Macromedia\FlashPlayerActiveX/PlayerPath 2
0004 [W] 00001018
0005 [W] 00001037 Software\Macromedia\FlashPlayer\SafeVersions/ 2
0006 [W] 00001037 SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\Adobe Flash Player ActiveX/ 2
0007 [W] 00001019
0008 [W] 00001020
0009 [W] 00001037 Software\Microsoft\Windows\CurrentVersion\RunOnce/FlashPlayerUpdate 2
0010 [W] 00001037 Software\Macromedia\FlashPlayerActiveX/ 2
0011 [W] 00001037 Software\Macromedia\FlashPlayer/FlashPlayerVersion 2
0012 [W] 00001037 Software\Macromedia\FlashPlayer/SwfInstall 2
0013 [W] 00001037 Software\Macromedia\FlashPlayerActiveXReleaseType/ 2
0014 [W] 00001037 Software\Microsoft\Code Store Database\Distribution Units\{D27CDB6E-AE6D-11CF-96B8-444553540000}/ 2
0015 [W] 00001021
0016 [W] 00001036 Software\Macromedia\FlashPlayerActiveX/PlayerPath 2
0017 [W] 00001036 Software\Macromedia\FlashPlayerPlugin/PlayerPath 2
0018 [W] 00001037 Software\Microsoft\Windows\CurrentVersion\Control Panel\Extended Properties\System.ControlPanel.Category/C:\WINDOWS\SysWOW64\FlashPlayerCPLApp.cpl 2
0019 [W] 00001048
0020 [I] 00000020 C:\WINDOWS\SysWOW64\FlashPlayerCPLApp.cpl
0021 [W] 00001036 Software\Macromedia\FlashPlayerActiveX/PlayerPath 2
0022 [W] 00001036 Software\Macromedia\FlashPlayerPlugin/PlayerPath 2
0023 [W] 00001037 SOFTWARE\Microsoft\Windows NT\CurrentVersion\Image File Execution Options\\FlashPlayerApp.exe/ 2
0024 [W] 00001037 Software\Microsoft\Windows\CurrentVersion\Control Panel\Extended Properties\System.ControlPanel.Category/C:\WINDOWS\SysWOW64\FlashPlayerCPLApp.cpl 2
0025 [W] 00001036 Software\Macromedia\FlashPlayerActiveX/PlayerPath 2
0026 [W] 00001036 Software\Macromedia\FlashPlayerPlugin/PlayerPath 2
0027 [W] 00001036 Software\Macromedia\FlashPlayerPlugin/PlayerPath 2
0028 [W] 00001018
0029 [W] 00001036 SOFTWARE\MozillaPlugins\@adobe.com/FlashPlayer/ 2
0030 [W] 00001037 SOFTWARE\MozillaPlugins\@adobe.com/FlashPlayer/ 2
0031 [W] 00001037 SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\Adobe Flash Player Plugin/ 2
0032 [W] 00001019
0033 [W] 00001020
0034 [W] 00001037 Software\Microsoft\Windows\CurrentVersion\RunOnce/FlashPlayerUpdate 2
0035 [W] 00001037 Software\Macromedia\FlashPlayerPlugin/ 2
0036 [W] 00001037 Software\Macromedia\FlashPlayer/FlashPlayerVersion 2
0037 [W] 00001037 Software\Macromedia\FlashPlayer/SwfInstall 2
0038 [W] 00001037 Software\Macromedia\FlashPlayerPluginReleaseType/ 2
0039 [W] 00001021
0040 [W] 00001036 Software\Macromedia\FlashPlayerActiveX/PlayerPath 2
0041 [W] 00001036 Software\Macromedia\FlashPlayerPlugin/PlayerPath 2
0042 [W] 00001037 Software\Microsoft\Windows\CurrentVersion\Control Panel\Extended Properties\System.ControlPanel.Category/C:\WINDOWS\SysWOW64\FlashPlayerCPLApp.cpl 2
0043 [W] 00001048
0044 [I] 00000020 C:\WINDOWS\SysWOW64\FlashPlayerCPLApp.cpl
0045 [W] 00001036 Software\Macromedia\FlashPlayerActiveX/PlayerPath 2
0046 [W] 00001036 Software\Macromedia\FlashPlayerPlugin/PlayerPath 2
0047 [W] 00001037 SOFTWARE\Microsoft\Windows NT\CurrentVersion\Image File Execution Options\\FlashPlayerApp.exe/ 2
0048 [W] 00001037 Software\Microsoft\Windows\CurrentVersion\Control Panel\Extended Properties\System.ControlPanel.Category/C:\WINDOWS\SysWOW64\FlashPlayerCPLApp.cpl 2
0049 [W] 00001036 Software\Macromedia\FlashPlayerActiveX/PlayerPath 2
0050 [W] 00001036 Software\Macromedia\FlashPlayerPlugin/PlayerPath 2
0051 [W] 00001036 Software\Mozilla\Firefox\extensions/Plugins 2
0052 [W] 00001036 Software\Opera Software/Last CommandLine 2
0053 [W] 00001036 Software\Opera Software/Last CommandLine 2
0054 [W] 00001036 Software\Opera Software/Plugin Path 2
0055 [W] 00001036 Software\Opera Software/Plugin Path 2
0056 [I] 00000011 1
=X====== M/13.0.0.214 2014-10-24+13-22-36.768 ========
=O====== M/13.0.0.199 2014-10-24+13-22-48.375 ========
0000 [I] 00000010 "\\rio1install01\install$\Aplications\Adobe\Flash 13\Flash 13\flashplayer13_install_win_ax.exe"
0001 [W] 00001036 Software\Macromedia\FlashPlayerActiveX/Version 2
0002 [W] 00001036 Software\Macromedia\FlashPlayerActiveX/PlayerPath 2
0003 [W] 00001036 Software\Macromedia\FlashPlayerActiveX/Version 2
0004 [W] 00001036 Software\Macromedia\FlashPlayerActiveX/PlayerPath 2
0005 [I] 00000011 1
0006 [I] 00000020 C:\WINDOWS\SysWOW64\FlashPlayerCPLApp.cpl
0007 [W] 00001037 SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\Adobe Flash Player ActiveX/ 2
0008 [I] 00000013 C:\WINDOWS\SysWOW64\Macromed\Flash\Flash32_13_0_0_199.ocx
0009 [I] 00000015 C:\WINDOWS\SysWOW64\Macromed\Flash\FlashUtil32_13_0_0_199_ActiveX.exe
0010 [I] 00000016 C:\WINDOWS\SysWOW64\Macromed\Flash\FlashUtil32_13_0_0_199_ActiveX.dll
0011 [I] 00000023 C:\WINDOWS\SysWOW64\Macromed\Flash\activex.vch
0012 [I] 00000019 C:\WINDOWS\SysWOW64\FlashPlayerCPLApp.cpl
0013 [I] 00000021 C:\WINDOWS\SysWOW64\Macromed\Flash\FlashPlayerUpdateService.exe
=X====== M/13.0.0.199 2014-10-24+13-23-49.006 ========
=O====== M/13.0.0.199 2014-10-24+13-23-53.746 ========
0000 [I] 00000010 "\\rio1install01\install$\Aplications\Adobe\Flash 13\Flash 13\flashplayer13_install_win_pi.exe"
0001 [W] 00001036 Software\Macromedia\FlashPlayerPlugin/Version 2
0002 [W] 00001036 Software\Macromedia\FlashPlayerPlugin/PlayerPath 2
0003 [W] 00001036 Software\Macromedia\FlashPlayerPlugin/Version 2
0004 [W] 00001036 Software\Macromedia\FlashPlayerPlugin/PlayerPath 2
0005 [I] 00000011 1
0006 [I] 00000020 C:\WINDOWS\SysWOW64\FlashPlayerCPLApp.cpl
0007 [W] 00001037 SOFTWARE\MozillaPlugins\@adobe.com/FlashPlayer/ 2
0008 [W] 00001037 SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\Adobe Flash Player Plugin/ 2
0009 [W] 00001036 Software\Mozilla\Firefox\extensions/Plugins 2
0010 [W] 00001036 Software\Opera Software/Last CommandLine 2
0011 [W] 00001036 Software\Opera Software/Last CommandLine 2
0012 [W] 00001036 Software\Opera Software/Plugin Path 2
0013 [W] 00001036 Software\Opera Software/Plugin Path 2
0014 [I] 00000014 C:\WINDOWS\SysWOW64\Macromed\Flash\NPSWF32_13_0_0_199.dll
0015 [I] 00000015 C:\WINDOWS\SysWOW64\Macromed\Flash\FlashUtil32_13_0_0_199_Plugin.exe
0016 [I] 00000024 C:\WINDOWS\SysWOW64\Macromed\Flash\plugin.vch
0017 [I] 00000017 C:\WINDOWS\SysWOW64\Macromed\Flash
0018 [I] 00000022 C:\WINDOWS\SysWOW64\Macromed\Flash\FlashPlayerPlugin_13_0_0_199.exe
0019 [I] 00000019 C:\WINDOWS\SysWOW64\FlashPlayerCPLApp.cpl
0020 [W] 00001024 C:\WINDOWS\SysWOW64\FlashPlayerCPLApp.cpl 183
0021 [W] 00001024 C:\WINDOWS\SysWOW64\FlashPlayerApp.exe 183
0022 [I] 00000021 C:\WINDOWS\SysWOW64\Macromed\Flash\FlashPlayerUpdateService.exe
0023 [W] 00001024 C:\WINDOWS\SysWOW64\Macromed\Flash\FlashPlayerUpdateService.exe 183
=X====== M/13.0.0.199 2014-10-24+13-24-03.441 ========
=O====== M/15.0.0.189 2014-10-24+13-33-24.591 ========
0000 [I] 00000010 "C:\TEMP\InstallPlugin_15_0_0_189.exe" -install -msi
0001 [E] 00001161
=X====== M/15.0.0.189 2014-10-24+13-33-24.916 ========
=O====== M/15.0.0.189 2014-10-24+13-39-34.068 ========
0000 [I] 00000010 "C:\TEMP\InstallPlugin_15_0_0_189.exe" -install -msi
0001 [E] 00001161
=X====== M/15.0.0.189 2014-10-24+13-39-34.424 ========
=O====== M/15.0.0.189 2014-10-24+13-53-18.490 ========
0000 [I] 00000010 "C:\TEMP\InstallPlugin_15_0_0_189.exe" -install -msi
0001 [E] 00001161
=X====== M/15.0.0.189 2014-10-24+13-53-18.809 ========
=O====== M/15.0.0.189 2014-10-24+19-02-51.050 ========
0000 [I] 00000010 "C:\TEMP\InstallPlugin_15_0_0_189.exe" -install -msi
0001 [E] 00001161
=X====== M/15.0.0.189 2014-10-24+19-02-51.458 ========
=O====== M/15.0.0.189 2014-10-24+19-18-23.366 ========
0000 [I] 00000010 "C:\TEMP\InstallPlugin_15_0_0_189.exe" -install -msi
0001 [E] 00001161
=X====== M/15.0.0.189 2014-10-24+19-18-23.676 ========
=O====== M/15.0.0.189 2014-10-24+19-53-48.530 ========
0000 [I] 00000010 "C:\TEMP\InstallPlugin_15_0_0_189.exe" -install -msi
0001 [E] 00001161
=X====== M/15.0.0.189 2014-10-24+19-53-48.840 ========
=O====== M/15.0.0.189 2014-10-24+19-56-42.561 ========
0000 [I] 00000010 "C:\TEMP\InstallPlugin_15_0_0_189.exe" -install -msi
0001 [E] 00001161
=X====== M/15.0.0.189 2014-10-24+19-56-42.867 ========
=O====== M/15.0.0.189 2014-10-24+20-02-43.338 ========
0000 [I] 00000010 "C:\TEMP\InstallPlugin_15_0_0_189.exe" -install -msi
0001 [E] 00001161
=X====== M/15.0.0.189 2014-10-24+20-02-43.762 ========
Pax et bonum

After I download Adobe Flash Player, YouTube still doesn't work. How do I fix this?

I just got my MacBook, and I want to watch YouTube videos. I installed Adobe Flash Player, but when I go to the videos, YouTube says that I still need to install Adobe Flash Player. I have done this multiple times, and nothing has happened. Thanks.

gfish15014 wrote:
I have no idea how to do that. Can you help me?
Go to Applications/Utilities/Disk Utility and select your volume and then select Repair Permissions. Same directions are also in the OS Mac Help Menu.

UpDated Flash Player last week doesn't work previous ver worked fine

I updated last week when it prompted me to, now websites that i used to use will not work. it just gives me a blank area where the flash animation should be. I have figured out that it has something to do with my firewall. When i disable the firewall flash works with it running it doesn't. I have tested this with http://www.adobe.com/software/flash/about/ . I don't understand why this ver is causing my firewall to block it. I have all the permission i need and the install was run as admin. I have tried reinstalls and using C/Windows/System32/Macromedia/Flash. I think i just need to change a setting on my firewall but i can't find where the addon is since i'm using firefox, i wish i never updated
setup: Vista Bus, Firefox, CA firewall, Flash Ver 10.0.22.87

I have the same problem...I downloaded around noon today and have been trying to figure out all day what is going on. You're situation sounds identical to mine. I was going to play a game that I play regularly and I got in just fine this morning and then at noon it told me to download an updated version of Flash Player I did and it still doesn't work. I really hope someone can answer the question.

Flash Player Suck It Doesn't Work

I'm SO Pissed off i cant watch any videos what so
ever on My Computer everytime i try it says Javascript may be
turned off or my Flash player need 2 be updated i tried 2 download
this Flash Player @ least a Hundred times and it stil doesn't Work
Personally I Think The Adobe Company need 2 Resolve this issue as
soon as possible I need my PC To Play these Videos I Have Homework
2 do I'm a College Student i tried everything and Nothing Work i
think they need 2 fix this product cause many people are
experiencing the same problem so obviously it's the player itself
and not our computers so please have a t echnician fix the
flashplayer immediately thanks sincerely Shane W!

Hi, You didn't say what operating system or browser(s) you are using. If you are using IE, go to your manage add ons
and look for Shockwave Flash Object..and see if Flash10e.ocx is listed with it and it is Enabled. If you use FF, find the plug-in SWF and it is 10.0.45.2 and enabled.
You can also check your Flash files to see if all of the old FP was removed and the new was installed.
Thanks,
eidnolb

Updating flash player and still doesn't work.

Recently, my games on Facebook and Youtube stopped working and prompted me to upgrade my flash player.
It included the link to Adobe, as do all the sites that require it.
So, I did. It says install successful, but it doesn't work. When I check to see if any version is installed, I see the red x. Please help.
I'm using Windows XP Version 2002 Service Pack 3
I.E. 8 32 bit.
P.S. I can use Firefox and Chrome, but I don't like the quality of how Flash Player runs on them.

Hi, I see from the other thread you commented on that the Kill-bit was your problem. Glad that worked for you:-)
Thread reference: http://forums.adobe.com/thread/829621?tstart=0
If you would, please mark this thread as answered even tho your solution wasn't from here.
Thanks,
eidnolb

Flash Player Installs but doesn't work WIN 7

It doesn't ever appear to be loaded when I look for it. Why in the world would it say that it has loaded and installed when it doesn't??
Look folks, I'm literally losing my mind here. I'm IRATE.
If you think you've seen this problem before, GUESS AGAIN. I have tried EVERY single suggestion that's on this website as well as others and NONE of it has worked. I keep seeing folks say that you have to have the 32 bit IE instead of the 64 bit. It says to check to make sure...when I look in About IE, it says 256 bit. What does that mean?? It says NOTHING about 32 bit OR 64 bit...WHICH ONE DO I HAVE??? No clarity on this site WHATSOEVER.
I've tried the uninstaller...putting it on my desktop...yadda, yadda. Restarted my comp around 20 times...nothing.
Seriously....the internet and, by extension, my computer are useless if I can't use flash. No videos, games, or anything other than text and pics. I'm 22, I'm not computer illiterate. Actually, until this...I've never had problems with computers and I've always thought of myself as fairly knowledgeable.
All I really want to do is talk to a person...but I don't want to pay $40. Someone please help me.

Hi, Please take a deep breath:-) Now I'll have questions that need answered so I can help restore your sanity/computer.
We'll just take it one step at a time.
Go to C:\Windows\System32\Macromed\Flash Open Flash and post back all files listed. You didn't indicate any browser other than IE8, but if you see any NPSWF files then right click on each. Then click on Properties to obtain the version numbers.
With Windows, the default browser is the 32bit browser. You would know whether your Operating System is a 64bit or not, but we'll know after you check those files in the Flash folder. A 64bit OS will have a 64bit browser and a 32bit browser, but since Flash Player needs the 32bit browser, then you have that. If you tried using a 64bit browser(if you had a 64bit OS), you'd receive a message directing you to read about the Flash Player & the 64bit OS. Hope that explains the difference.
After the above, Using IE, go to Tools, Manage addons and under "Show"(very light text) look in all addons for Shockwave Flash Object. Is it Installed and Enabled?
Then go here and test: As soon as the site opens you should see the Flash logo animate and the version of Flash Player you have will be displayed. http://www.adobe.com/software/flash/about/
Let me know on the above. (you'll be glad to know that I won't bill you $40.00:-)
Thanks,
eidnolb
Message was edited by: eidnolb adding link

Flash Player 11.04 doesn't work

After succesfully using prior isues of Flash Player for ages, the latest version (11.04 for Mac) doesn't work for me. The message "Blocked Plug-in" apppears wherever an Flash Player image should be.... even though the recently downloaded plug-in is in the plug-in folder.
Suggestions?
Thanks!
Lee

Moved to Installing Flash Player

Flash player plug in doesn't work

I download the latest version of flash player but on some web sites they still tell me i need to download the latest version and the website doesn't work. please help!!!

What is your operating system, version & edition?
What is your web browser?
Try a clean install as described in http://forums.adobe.com/thread/928315

Flash player upgrade alert doesn't appear for users

I realize there's been an upgrade to the Flash player.
I have a client whose web site is built in Flash, however, and all that appears for her and most of her audience (PC, I think) is a blank screen -- no alert to let the users know that an upgrade is available.
Here is the web site:
http://www.axwildtours.com
I would like for users with outdated Flash players (or perhaps Internet Explorer) to try this link and let me know how I can fix this issue.
Many thanks,
Susan

In general, Flash Player is backwards-compatible. A new upgrade shouldn't render the site useless. My guess is that changes to Internet Explorer are actually at the root of the problem, but a survey of what configurations the site does and doesn't render under would be useful in understanding what's happening. At a quick glance, I see that there are some conditional comments in your HTML, which IE no longer supports.
You might want to take a look at using SWFObject to embed the SWFs instead of using the Object/Embed tags that you're currently using:
swfobject - SWFObject is an easy-to-use and standards-friendly method to embed Flash content, which utilizes one small…
This may also be related to ActiveX filtering in IE. When I view the site in IE11, I get the prompt asking if I want to show Flash content. Once I allow it, the content renders as expected.
ActiveX Filtering
There are a bunch of free tools for testing against Internet Explorer over at http://modern.ie/. They might be useful in helping you modify your site to be compatible across IE versions.

Tried installing new Flash Player but it doesn't work.

I went to view a video online and it said i needed an new version of Flash player so i clicked on the link and i downloaded the newest version. I unistalled all of my old Adobe versions first. It said installation complete but now EVERYTHING that used Flash before (Pandora, You Tube, Hulu, etc) doesn't work. I keep trying to uninstall and re-install but nothing changes. My adobe reader works, but not Adobe Flash. HELP!!

Hi, You didn't say what operating system or browser(s) you are using. If you are using IE, go to your manage add ons
and look for Shockwave Flash Object..and see if Flash10e.ocx is listed with it and it is Enabled. If you use FF, find the plug-in SWF and it is 10.0.45.2 and enabled.
You can also check your Flash files to see if all of the old FP was removed and the new was installed.
Thanks,
eidnolb

New flash player 11 update doesn't work with internet explorer 8

I have Windows 7 and IE 8. This is a home desktop computer.
When the latest update of FlashPlayer 11.5.502.146 was automatically installed on Jan 9, IE8 stopped working. I can navigate to a site, but then it just freezes. I can not click any toolbar or other buttons or links--I can not even close IE--I have to use task manager. If I disable Flashplayer, IE works fine, but then of course no content can be displayed. If I go to a site and then enable Flashplayer, I can't click on anything again, so that doesn't work. HELP. Does the newest update not work with IE8?

I have a similar problem. I've Win XP SP3 with IE 8. For last few months I've noticed that Flash Player is not able to play flash audio/video on a webpage i.e., upon visiting a page the flash player starts loading but it does not finish - a circle keeps rotating - player does not manage to display 'Play' button. I've uninstalled and reinstalled Flash Player 11.5.502.146. Also, installed Flash Player 11.6.602.161 from above link. But, with same result.
Same behaviour is repeated in FireFox 18.0.1 with Flash Player 11.5.502.146. It seems that something else is not allowing flash player to play. I've latest Java 7 Upd 13, ZoneAlarm 11 and Avast 7.0.1474.
(Note: I've another PC with Win XP SP3, IE 8 and FireFox 18.0.1 and Flash Player 11.5.502.146 works well. It has Java 7 Upd 13. It has ZoneAlarm 11 and Windows Defender AV)
Can anyone help?

Flash Player 10.1 doesn't remember volume setting, defaults to MAX

Similar Messages

Maybe you are looking for