Flash Player 10.1 loading wrong .swf
- As I didn't find another place for Flash Player 10.1 standalone-subjects (only 10.2. or the browser-players), I hope that this is the correct place for my post -
I have a strange problem: When I open my .swf with double-click from the finder, it opens in FP 10.1. - but an _older_ project (which is located in a completely different place) will load! And it opens twice ... No matter, what new .swf I am creating, it's always this old file that will start ...
When opening the same .swf in FPlayer 9, it works fine ...
Anyone an Idea, what I can do about this?
Thanks a lot for help!!
pipipina
System:
MacBook Pro, OS 10.6.6, 2.4 GHz Intel Core i5
I don't know what it was - but solved it. Put the file that was wrongly loaded into another folder. All .swf-files opening fine. Put the file back to its old place and now everything is normal again.
Strange ... but solved.
Similar Messages
-
Adobe flash player does not load statistics on Google Public Data
Adobe flash player does not load statistics on Google Public Data and displays a white page. However If I put the same URL in an other browser the page loads seamlessly. Is it a Firefox or a Adobe flash player bug ?
I looked on the Google Public Data site, but couldn't find any Flash videos.
Can you provide a link where you say the problem is occurring? -
Flash Player fails to load on start-up
I recently upgraded to Flash Player 11.2.202.235 for my Win 7 64 bit system and have had nothing but problems since. I can install Flash Player and it works fine, until I shut down or restart my system. Once the system restarts, it is as if Flash Player is not loading. I am using IE 9 and AOL 9.6 as web browsers and am getting the same result in both. I down loaded google chrome with the flash player to see if that would make a difference, no luck. When I look for flash player, it is in my registered programs and I have a folder for it as well. I have done the following things: tried downloading with anti-virus on and off, firewall on and off, pop-up-blocker on and off, downloaded through IE9 and through AOL, unistalled and reinstalled, Active X Filtering On and Off. Nothing seems to work, if I restart the computer, Flash Player is not recognized by any program...even Abobe. I have tried the troubleshooting forums, no luck there either. Anyone have any ideas or encountered a similar problem?
Try a clean install as described in http://forums.adobe.com/thread/928315
-
Adobe flash player will not load and run. Uninstalled and reinstalled with no change.
Adobe flash player will not load. Uninstalled and reinstalled with no change.
Adobe’s advice regarding Flash Player 13:
http://forums.adobe.com/message/6288659 -
I am IRATE that the flash player update just loaded several BS programs that I don't want. FAIL
I am IRATE that the flash player update just loaded several BS programs that I don't want. FAIL
-
Flash Player still not loading! Help!!
Hi. My Adobe Flash Player is not loading. I've upgraded it and each time I do, I still get "You need to upgrade your Adobe Flash Player". I've not been able to watch any videos or play games for almost 1 week now. I'm using IE9/Win. 7. I recently got an iPad and had to download Safari. Could this be the culprit? No one else I know has had this same problem w/Safari. Thanks.
My problem was downloading the flash player. It just would not load. I'm using IE9 and Win 7 32-bit. It took a week, but it's working now. Thanks.
-
Flash player can't play a .swf file alone
I've have a weird issue regarding flash.
I used Flash CS5 to create an interactive presentation. Everything works perfectly.
My problem is, for some unknown reason, everytime I try to open a stand alone .swf using flash player, the player always opens my interactive presentation instead and tries to load the .swf INTO it. Using the finder's info window, when I do select a .swf, I get the information all my .swf have been changed to "interactive presentation files", and the default application assigned to open these files is my own presentation.
I can manually change these settings to select Flash player or Flash CS5 back as the default application for all .swf's, but as soon as I close the info window, the files immediately becomes "interactive presentation" files again, so Flash player insists in openning the fiels inside my presentation.
There's a permanent way to fix this?
I'm using a Mac Intel core duo 2.
EDIT: I temporarily solved the problem deleting all copies of my presentation's projector. The flash player atemmpted to use another presentation instead to open .swf files, so I deleted that one too. After that, now plays the .swf files as normal. The only problem is, if for any reason I do re-install any of my interactive presentations proyectors, Flash player immediately tries to use them to play the .swf's... so the problem really remains unsolved.The web flash player does not play stand alone .swf files on your computer.
-
Flash player "Movie not loaded" in Chrome on certain pages.
When tryingto load a video in Chrome I get a blank window and a "movie not loaded" message when I right click. The video doesn't work in Firefox or IE either. It just doesn't display the player at all.
Youtube works though and I can see the test flash animation on adobe's website but it's not working on a specific website. I tried I uninstalling Flash using Revo and reinstalling it, running CCleaner, disabling hardware acceleration, updating Chrome and deleting flash player's stored data.
I read some where that it might be network/firewall related but I wouldn't know how to investigate that.
Any ideas on how to fix this?Couple things...
Since you are using the old, outdated <object><embed> method, you normally use a classID with the object, like this:
<object classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" codebase="http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=7,0,19,0" width="550" height="400">
along with the correct path to the file name... (you are using a fake filename in the object)
But a better method is to skip the <embed> entirely and use this updated version of <object>
<object data="http://www.gwarg.dk/images/GWG2.swf" type="application/x-shockwave-flash" width="550" height="400">
<param name="movie" value="http://www.gwarg.dk/images/GWG2.swf">
<param name="quality" value="high" />
</object>
You can change the path to relative paths instead of absolute if you like.
Best wishes,
Adninjastrator -
Adobe Flash Player "Movie Not Loaded" on Browsers?
On Browsers (Firefox, Chrome) Adobe Flash Player does not display and only shows a white empty space that, when right clicked, says "Movie not Loaded".
Can someone help me to fix this issue?Im able to stream youtube video.Bt when i try to stream a local video, white
screen occurs.
This is my code
<object width="630" height="312" classid="clsid:D27CDB6E-AE6D-
11cf-96B8-444553540000" codebase="http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=7,0,19,0">
<param name="salign" value="lt"/>
<param name="quality" value="high"/>
<param name="scale" value="noscale"/>
<param name="wmode" value="transparent"/>
<param name="movie" value="http://geekfile.googlepages.com/flvplay.swf"/>
<param name="FlashVars" value="&streamName=http://localhost:8080/resources/video/demo-video.flv&skinName=http://geekfile.googlepages. com/flvskin&autoPlay=true&autoRewind=true"/>
<embed width="630"
height="312"
flashvars="&streamName=http://localhost:8080/resources/video/demo-video.flv&autoPlay=true&autoRewind=true&skinName=http://geekfile.googlepages.co m/flvskin"
quality="high"
scale="noscale"
salign="LT"
type="application/x-shockwave-flash"
pluginspage="http://www.macromedia.com/go/getflashplayer" src="http://geekfile.googlepages.com/flvplay.swf"
wmode="transparent">
</embed>
</object> -
Flash player freeznig when loading in small XML files
Hi all,
I could really use some help in finding a reasonable solution
to this problem. I'm getting a problem where the flash player
freezes giving the "A script is causing the flash player to run
slowly" dialog box, when it's trying to load in XML files for
content. Therre are 15 files and they are all between 1-3kb. I
wrote a loop so that the next file doesn't begin loadnig until the
previous file has finished. But on some machines I still randomly
get this problem.
I've tried using the download simulator in flash and it seems
that this error always occurs on lower connection speeds, but we
are on a fast connection here and I still randomly get it freezing
I traced which files it freezes on and it's different ones every
time.
Any help would be greatly appriciated.
Thanks.
Here is the code for my xml functions:
// LOAD XML CONTENT FILE
function loadXMLFile(fileName, callBackFunction){
var_xml = new XML();
var_xml.load(fileName);
var_xml.ignoreWhite = true;
var_xml.onLoad = callBackFunction;
// FUNCTION: getNodes()
function getNodes(success) {
if (success == true) {
loadParentNode(this);
else {
trace("ERROR: XML not loaded");
// CREATE VARIABLES FROM NODES
function loadParentNode(myXMLobj) {
var obj_xml = myXMLobj;
//Determine number of parent nodes
var noOfParentNodes = obj_xml.firstChild.childNodes.length;
var content_xml = findXMLNode(obj_xml, "content");
if (noOfParentNodes > 0) {
for (x=0; x < noOfParentNodes; x++){
var currentNode = content_xml.childNodes[x].nodeName;
var currentValue = findXMLValue(content_xml, currentNode);
this[content_xml.childNodes[x].nodeName] = currentValue;
gotoAndPlay("xmlOK");
else {
trace ("1 ERROR: No Parent Nodes Found");
// GET VALUE OF CHILD NODE
function getChildNode(sectionName, desiredNodeName) {
var obj_xml = this.var_xml; // create a pointer to the XML
object
var noOfParentNodes = obj_xml.firstChild.childNodes.length;
if (noOfParentNodes > 0) {
for (x=0; x < noOfParentNodes; x++){
//Find parent Node (sectionName)
if (obj_xml.firstChild.childNodes[x].nodeName ==
sectionName) {
var nodeFound = 1;
var XMLvars = obj_xml.firstChild.childNodes[x];
var noOfChildNodes = XMLvars.childNodes.length;
if (noOfChildNodes > 0) {
for (var i = 0; i < noOfChildNodes; i++) {
if (XMLvars.childNodes
.nodeName == desiredNodeName) {
return XMLvars.childNodes.firstChild.nodeValue;
} else {
trace ("ERROR: No Parent Nodes Found");
if (nodeFound <> 1) {
trace ("ERROR: Parent Node \"" + XMLnodeName + "\" Not
Found.");
//===FIND XML
NODE=======================================================
_global.findXMLNode = function(node_xml, XMLnodeName) {
while (node_xml.nodeType == 1) {
if (node_xml.nodeName == XMLnodeName) {
return node_xml;
} else if (node_xml.firstChild.nodeType == 1){
checkChildNodes = findXMLNode(node_xml.firstChild,
XMLnodeName);
if (checkChildNodes != undefined) return checkChildNodes;
node_xml = node_xml.nextSibling;
//===FIND XML
VALUE=======================================================
_global.findXMLValue = function(node_xml, XMLnodeName){
while (node_xml.nodeType == 1) {
if (node_xml.nodeName == XMLnodeName) {
return node_xml.firstChild.nodeValue;
} else if (node_xml.firstChild.nodeType == 1){
return findXMLValue(node_xml.firstChild, XMLnodeName);
node_xml = node_xml.nextSibling;
}Hi Rex,
That plugin version installed is actually the HW accelerated beta version Gala: 10.1.81.25 (The current version is 10.1.81.75). I would recommend installing the official release, since the Gala version does have some compatibility issues. You can download the latest version here: http://get.adobe.com/flashplayer/
-Charbs -
Flash Player (Web Export) showing wrong colors
Cheers!
Sometimes when I look at my exported galeries I'm not satisfied regarding the colors. Up to today I thought that this is based on my week skills in developing photos.
But that seems to be wrong! Please helpt me with the following:
I'm exporting via Web Module using a simple viewer template (which uses the adobe flash player to display images). Now I fire up that little web page in my browser (safari or firefox in my case) and compare what I see with what I see in lightroom (library module). I can notice a very severe difference in the color presentation. Next I start a second browser window and place it beside the one showing the flash player galery exported before. Within that browser window I call the image from the image folder within the exported web page and compare both. Hence! It does not look like the same.
To illustrate that I shot the following a couple of minutes ago:
http://minolta.karlos.at/test.png
On the left you see the lightroom web galery (simple viewer) and on the right the jpeg picture itself. (You can try that by starting the web galery and then click on the photo and launch it with the command "open picture in new window"
Weird!
Is that behaviour known and is there any solution to avoid this wrong color display?
Thanks!
C.Flash is not color managed (although in the latest version you can somehow turn it on I understand) so it will never show the right color ever. That said, if you have a good display but not so good it has a wide gamut, and you calibrate correctly at gamma 2.2, you should see very similar color. The problem on Macs that have not been calibrated is that the default gamma is wrong (even Apple says this) and they have to be calibrated to be right. Normally Safari color manages so the gamma of most images gets automaticaly corrected, but it cannot color manage flash.
That said, from your screenshot it appears the difference is entirely due to the difference in gamut between your display and sRGB. There is nothing you can do about it but pester Adobe to enable color management for the latest flash versions in the Lightroom flash galleries. Of course nobody that looks at your gallery will actually see the right color anyway as basically nobody calibrates their screen and most people do not even use color managed browsers. -
Flash Player does not load content
We have a page that should load a video but it will not work on all browsers. It works for some users in the company on IE 9 but for some of the employees it will not load. It works fine on Chrome. We are on Flash Player version 14.0.0.145, Windows 7, IE 9.
What I would try if I encountered your situation is to check if a newer device driver for the display adapter is available; see http://forums.adobe.com/thread/945765
-
Flash Player content not loading IE11...
Hi I'm having issues with Flash Player on IE 11...
OS: Windows 7 Professional SP1.
Browser: IE 11 (Version: 11.0.9600.17041 / Update version: KB2929437)
Flash Player: ActiveX Version 16.0.0.235
NPAPI Plug-in Version 16.0.0.235
PPAPI Plug-in Version Not installed
Website: http://www.nick.co.uk (as well as others but this one is one of the important sites; as reward for students at the school)
I have disabled ActiveX filtering, I have made sure that Shockwave Flash Object is enabled; I have made sure that ActiveX is allowed on all sites... As far as I can tell I have ticked/un-ticked all the right boxes and still IE11 will not load any Flash Player content.
The quick fix would be to use Firefox or Google Chrome or any other web browser; however the students at the school I work at have severe and profound learning, behavioural, and/or physical difficulties that mean I do not want to interfere with the established method of accessing the internet, and software that they are familiar with.
Any advice or guidance would be greatly appreciated.First, confirm that ActiveX Filtering is configured to allow Flash content:
https://forums.adobe.com/thread/867968
Internet Explorer 11 introduces a number of changes both to how the browser identifies itself to remote web servers, and to how it processes JavaScript intended to target behaviors specific to Internet Explorer. Unfortunately, this means that content on some sites will be broken until the content provider changes their site to conform to the new development approach required by modern versions of IE.
You can try to work around these issues by using Compatibility View:
http://windows.microsoft.com/en-us/internet-explorer/use-compatibility-view#ie=ie-11
If that is too inconvenient, using Google Chrome may be a preferable alternative. -
Flash player 10 error loading dll using IE 8.0.6001.18372 RC1 on Vista
hi,
How do I fix these errors below seen when trying to display
pictures at some
http://smilebox.com url in Internet
Explorer 8.0.6001.18372 RC1 on my vista box? I've installed Adobe
flashplayer and Adobe's activeX controller, they show up in the
list of programs added to this box. i've successfully installed
firefox 3 browser and same smilebox url works fine there. firefox
plugins show Shockwave flash 10.0 r12. here is the errors:
Webpage error details
User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Windows NT
6.0; Trident/4.0; SLCC1; .NET CLR 2.0.50727; Media Center PC 5.0;
.NET CLR 3.0.04506; .NET CLR 1.1.4322)
Timestamp: Fri, 30 Jan 2009 19:14:41 UTC
Message: Error in loading DLL
Line: 93
Char: 26
Code: 0
URI:
http://secure.smilebox.com/scripts/swfobject144.js
Message: Error in loading DLL
Line: 93
Char: 26
Code: 0
URI:
http://secure.smilebox.com/scripts/swfobject144.js
Message: Unspecified error.
Line: 37
Char: 3
Code: 0
URI:
http://pagead2.googlesyndication.com/pagead/inject_object_div.js
thanks for any pointers.Well, great. I tried the uninstall/reinstall before, but not with the uninstaller, so I was hopeful that this time might do it. No such luck. The video still plays, but no sound.
All the sound settings are working with everything else from games to media players. I set Windows' firewall to allow both the ActiveX and plugin for Flash, just in case.
In the Flash folder, I now have:
Flash10l.ocx (10.1.102.64)
Flash Util10l_ActiveX (10.1.102.64)
FlashUtil10l_Plugin (10.1.102.64)
Genuinst (6.0.2800.1531)
FlashUtil10l_ActiveX.dll (10.1.102.64)
NPSWF32.dll (10.1.102.64)
And the setup and text files that went with 'em.
I've also done a system restart since then and zip.
I went through IE and Firefox and looked for any file associations (like .flv) that I could manually change over to using Flash, but no go. The settings panels for Flash have all been set to allow YouTube specifically (as a test) and to allow 10KB of storage space for all affected sites.
Now what? I'm really not looking forward to a reformat and reinstall, but it's looking like that's what it's going to take.
Date: Sun, 14 Nov 2010 17:37:07 -0700
From: [email protected]
To: [email protected]
Subject: Flash Player 10 does not work in IE or Firefox. What could it conflict with?
Something is strange with your list of modules; you list FlashUntil10i_Plugin (10.1.102.64), but this is really 10.1.85.3
I recommend that you uninstall Flash Player completely (using http://kb2.adobe.com/cps/141/tn_14157.html), then restart Windows, and delete all remaining files in C:\Windows\system32\Macromed\Flash.
Next reinstall both ActiveX (http://fpdownload.adobe.com/get/flashplayer/current/install_flash_player_ax.exe) and the plugin (http://fpdownload.adobe.com/get/flashplayer/current/install_flash_player.exe).
After that, if the problem persists, have a look at this page http://kb2.adobe.com/cps/837/cpsid_83739.html
> -
Flash AIR app cannot load child swfs on publish to device
I have been struggling with this problem for WEEKS now and can't solve it. I have an flash AIR app (creative cloud, AIR 3.8) which is very simple: all it does is load external SWF movies on the click of a start button. It works FINE in test/PC but when I publish to device, the external swfs do not load.
Here is the code on the main timeline that calls the external swfs:
//start button
start_button_TRI_desmatosuchus.addEventListener(MouseEvent.CLICK, fl_ClickToLoadUnloadSWF_02_3,false,0,true);
import fl.display.ProLoader;
import flash.events.Event;
var fl_ProLoader_02:ProLoader;
var fl_ToLoad_02:Boolean = true;
function fl_ClickToLoadUnloadSWF_02_3(event:MouseEvent):void
if(fl_ToLoad_02)
fl_ProLoader_02 = new ProLoader();
fl_ProLoader_02.load(new URLRequest("dinofilms/triassic_desmatosuchus.swf"));
fl_ProLoader_02.contentLoaderInfo.addEventListener(Event.COMPLETE,onComplete_02 )
addChild(fl_ProLoader_02);
fl_ProLoader_02.x = 0;
fl_ProLoader_02.y = 144;
else
if (fl_ProLoader_02!=null) {
removeChild(fl_ProLoader_02);
fl_ProLoader_02.unloadAndStop();
fl_ProLoader_02 = null;
fl_ToLoad_02 = !fl_ToLoad_02;
function onComplete_02(e:Event):void {
e.currentTarget.content.addEventListener(Event.ENTER_FRAME,OEF_02);
function OEF_02(e:Event):void {
if (e.currentTarget.currentFrame==e.currentTarget.totalFrames) {
e.currentTarget.stop();
e.currentTarget.removeEventListener(Event.ENTER_FRAME,OEF_02);
removeChild(fl_ProLoader_02);
fl_ProLoader_02.unloadAndStop();
fl_ProLoader_02 = null;
I am calling about 30 different movies on 30 different frames, so that's why I am using tags like "proLoader_01" so I don't duplicate them. All the external swfs are of course listed in the included files too.
I would really appreciate the assistance, I am a reluctant coder!
Message was edited by: Fiona PassantinoOK, I replaced all the "ProLoader" instances with "Loader" and I am getting an error, below (see***)
//start button
start_button_TRI_coelophysis.addEventListener(MouseEvent.CLICK,
fl_ClickToLoadUnloadSWF_01_3,false,0,true);
import fl.display.Loader; **HERE, ERROR IS: 1172 fl.display:Loader could not be found**
import flash.events.Event;
var fl_Loader_01:Loader;
//This variable keeps track of whether you want to load or unload the SWF
var fl_ToLoad_01:Boolean = true;
function fl_ClickToLoadUnloadSWF_01_3(event:MouseEvent):void
if(fl_ToLoad_01)
fl_Loader_01 = new Loader();
fl_Loader_01.load(new URLRequest("dinofilms/triassic_coelophysis.swf"));
fl_Loader_01.contentLoaderInfo.addEventListener(Event.COMPLETE,onComplete_01)
addChild(fl_Loader_01);
fl_Loader_01.x = 0;
fl_Loader_01.y = 144;
else
if(fl_Loader_01!=null) {
removeChild(fl_Loader_01);
fl_Loader_01.unloadAndStop();
fl_Loader_01 = null;
fl_ToLoad_01 = !fl_ToLoad_01;
function onComplete_01(e:Event):void {
e.currentTarget.content.addEventListener(Event.ENTER_FRAME,OEF_01);
function OEF_01(e:Event):void {
if(e.currentTarget.currentFrame==e.currentTarget.totalFrames) {
e.currentTarget.stop();
e.currentTarget.removeEventListener(Event.ENTER_FRAME,OEF_01);
removeChild(fl_Loader_01);
fl_Loader_01.unloadAndStop();
fl_Loader_01 = null;
Maybe you are looking for
-
Every time I ask Siri to find something near me, she says that she cannot find my location because I need to turn on location services in the settings menu and in siri. These are both on, and after rebooting my phone it still doesn't work correctly.
-
Hi forum, Pls help me out...I'm getting short dump if i execute this.. pls correct the code....... REPORT ZPAY_REG NO STANDARD PAGE HEADING line-size 150 line-count 65(3). TYPE-POOLS: slis. TABLES: payr, t012, t012k, t51r5. Data : begin
-
Distribution of Costs from CCA to CO-PA
Hi All, Can someone please help me find a solution to the following scenario? There is a requirement to distribute costs from CCA to Cust/Prod level in CO-PA. *The cost allocations factors can only be provided at the Customer Group/Product level. *Us
-
Looking for an mp3 player for a webpage
because of apple I'm staying away from flash players for now... I 'm lloking for a simple to use mp3 player that's customizable - for example : read & display xml playlists make the list of viewable songs what we choose - like 10 songs or 20 songs -
-
I password protected my iweb site how do u undo it so it's public
How do you make ur iweb public after butting username and passcode to get in?