Flash Player 10 ActiveX, installed perfectly on FireFox but does not want to install on IE8
I tried to install Flash Player 10 ActiveX but no luck
operating system VISTA 32bit
web browser and version IE8 32bit
Flash Player version WIN 10,1,82,76
is there anything in the security needs to be adjusted?
It was running perfect before I do the latest upgrade
It is running perfect on Fire Fox
It is just not working on IE8
Flash Player 10 ActiveX, installed perfectly on FireFox but does not want to install on IE8
Hi, You might want to review the Troubleshooting Guide as it has been updated and a lot of new information is now included. If you prefer you can use the Manual Installer for IE which you'll see there. A lot of the questions that I would ask are listed also.
http://kb2.adobe.com/cps/191/tn_19166.html
Hope this is helpful for you.
Thanks,
eidnolb
Similar Messages
-
While every time i try to update my flash player plug-in, It save it but does not update it
I go to you tube to watch a video and Adobe Flash Player has crashed (send crash report) So when i do that it don't do anything but remain the same, so i update the plug-in and the computer saves it and it still says its not updated in the plug-in check page, and i tried to do the same thing with trying to update my Firefox browser?
Try This...
Close All Open Apps... Sign Out of your Account... Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430
If no joy...
Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact
It should be Noted that anything Downloaded with a Particular Apple ID is tied to that Apple ID and Cannot be Merged or Transferred to a Different Apple ID. -
Had installed the component of the Double Click Studio in my Flash CS6, but uninstalled it and now does not want to install. Is in install mode screen and Extension Manager does not install. Help me!
What you said confused me. You uninstalled it. You does not want to install. Why do you install it again? Could you explain it clearly?
-
Clicking links in apple mail opens firefox, but does not go to the actual link.
Clicking on links in Apple Mail opens/switches to Firefox, but does not go to the page of the actual link. It just loads the homepage or stays on whatever page I was on before. Links work fine when I switch my default browser to Safari, so I think the problem is with Firefox, not Mail. Downloading the latest version of Adobe Flash seemed to temporarily fix the problem, but it stopped working within a day or two.
Here's a link to a thread that solved the problem for me:
http://discussions.apple.com/thread.jspa?messageID=12552345�
The culprit was that the Flash plugin needed updating for FF. That was it.
Go to Firefox; Preferences; General (tab); Add-ons; Manage Add-ons; Plugins.
I clicked on Find Updates and immediately updated the Flash plugin.
Hope this helps others. -
Field on manual tabular appears using Firefox but does not appear using IE
Hello,
A field in a manual tabular form appears correctly using Firefox but does not appear or appears in another field when IE is used. Javascript is used to hide certain columns on the tabular form. Does anyone know how to solve this problem?
Thanks panyPrabodh,
The select for the report and the javascript that is used to hide the columns are displayed below. The data for Apex_item.select_list_from_lov(12,null,'LOV_METHOD_OF_ACQ') is shown in the previous column, Date Acquired, and the column for Method Acquired is blank. It appears correctly in Firefox. Please let me know if this is sufficient.
Thanks,
pany
SELECT
apex_item.hidden(1, c011) status
,apex_item.checkbox(2,seq_id) checkbox
,apex_item.hidden(3, seq_id) seq_id
,apex_item.hidden(4,c001) Owner_Firm_Id
,apex_item.hidden(5,c002) Owner_Id
,apex_item.hidden(6,c003,10) First_Name
,apex_item.hidden(7,c004,10) Last_Name
,apex_item.text(8,c005,10) Number_Shares
,apex_item.text(9,c006,10) Percentage
,apex_item.text(10,c007,10) Class
,apex_item.date_popup(11,rownum, c008, 'MM/DD/YYYY',15) Date_Acquired
,apex_item.select_list_from_lov(12,c009,'LOV_METHOD_OF_ACQ') Method_Acquired
,apex_item.hidden(13,c010,10) Primary_Key
FROM apex_collections
WHERE collection_name= 'INTEREST_STOCK_COLL'
AND c011 IN ('O','N','U')
union all
select
apex_item.hidden (1,null) status
,apex_item.checkbox(2, null) checkbox
,apex_item.hidden(3, null) seqid
,apex_item.hidden(4,null,10) Owner_Firm_Id
,apex_item.hidden(5,null,10) Owner_Id
,apex_item.hidden(6,null,10) First_Name
,apex_item.hidden(7,null,10) Last_Name
,apex_item.text(8,null,10) Number_Shares
,apex_item.text(9,null,10) Percentage
,apex_item.text(10,null,10) Class
,apex_item.date_popup(11,1, null,'MM/DD/YYYY',15) Date_Acquired
,apex_item.select_list_from_lov(12,null,'LOV_METHOD_OF_ACQ') Method_Acquired
,apex_item.hidden(13,null,10) Primary_Key
FROM dual
Javascript
function hideCols(p_startOfTable, p_pageList, p_debug)
alert("in function");
var outStr = "Blanking Script:\n";
var debug = p_debug;
var offCols = p_pageList.split(":"); //string comes in colon delimited, split it
into array
var tbl = document.getElementById(p_startOfTable); //get the table from the page
html source
var rows = tbl.getElementsByTagName('tr'); //get the first row
var tds = tbl.getElementsByTagName('td');
var testStr;
outStr = outStr + "START tds length is " + tds.length + "\n";
if (debug)
alert(outStr);
//START Clear Headers
var i, j, cells;
cells = rows[0].getElementsByTagName('th'); //get the headers
for (j = 0; j < offCols.length; j++)
cells[j].className = "hidden";
outStr = outStr + "i is " + i + " HEADER rows.length is " + rows.length +
"\n";
if (debug)
alert(outStr);
//END Clear Headers
//START Clear TDs
for (i = 0; i < tds.length; i++)
var attrib = tds.innerHTML;
var gNum = attrib.indexOf(" name=") + 7;
var colNum = attrib.substr(gNum, 2);
colNum = parseFloat(colNum);
for (j = 0; j < offCols.length; j++)
if (debug)
testStr = testStr + "\n" + "colNum is: " + colNum + " className is: " +
tds[i].className + " i is: " + i + " j is: " + j + "\n";
if (colNum == offCols[j])
if (debug)
alert("colNum is " + colNum);
if (tds[i].className == "datepicker")
if (debug)
alert("caught condition with i= " + i);
tds[i - 1].className = "hidden";
tds[i].className = "hidden";
tds[i + 1].className = "hidden";
//add popupLOV functionality here
//add radio button functionality here
// add other items that may have multiple <td>
else
//regular hideCol
tds[i].className = "hidden";
//END Clear TDs
if (debug)
alert(testStr);
//document.write(testStr);
Edited by: PANY on Aug 12, 2010 8:25 AM -
AMD High Definition Graphics Driver_TR does not want to install
I have a HP Pavilion 17 Notebook, Product number: G4X63UA#ABA, with windows 8.1 64 bit that has a AMD Radeon HD 7640G Graphics card,
but the graphics driver update from HP (mentioned in the subject line) does not want to install?Hello @Ebert1,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I understand that you are not able to install the AMD graphics driver on your notebook computer, and I would be happy to assist you in this matter!
To successfully install any missing software on your computer, I recommend installing the original software and hardware drivers that came with your notebook. This can be done by following this document on Using Recovery Manager to Restore Software and Drivers (Windows 8), as well as Using HP Support Assistant (Windows 8) to update your drivers.
Please re-post with the results of your troubleshooting, and I look forward to your reply!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping! -
iMovie stays on desktop but does not want to open up so I can use it, any thoughts??
Hi,
I had this problem. Solution was to move mouse over taskbar icon. When Firefox displays small icon right click this and select maximise window !!! I think somehow Firefox got minimised to the taskbar and would not reopen as a full window. i.e it when you clicked the taskbar icon it would pop up and then pop back down to the taskbar again !!
Hope this helps. -
Apple Magic Mouse responds but does not want to click to web links, but gives options instead, go back, look up, save, etc? Changed batteries but does not solve the mouse problem. I click all over the page and it continues to provide options and link is indicated in blue, but have to keep trying until it finally let me continue.
Are you sure you are clicking on the left side of the mouse, rather than somewhere in the middle (and probably closer to the right side)?
-
Successfully downloaded os x lion, but does not show as installed
Bought and successively downloaded os x lion on my Mac, but does not show as installed
That's one of the confusing things about the App store. The app you purchase there is the Installer.
If you've successfully run the installer then your Mac is on Lion but the last step of the install proceedure deletes the Installer from your apps directory. The App store then reflects that the Installer is not installed on the system.. which is true.
You can redownload the installer from the app store if needed. If the installer is still in the Apps directory then you probably haven't installed Lion yet, just downloaded it.
Regards,
Captfred -
LR CC 2015 is install in my imac but does not open
just downloaded LR CC 2015, it is install in my imac and appears as up to date but does not open, any way to solve this problem. thank you.
Hi Luis,
Try signing out of the CC desktop app, then sign back in again and check. Sign in, Sign out | Creative Cloud desktop app
~ Arpit -
Super iGoogle for firefox not working
Also please make sure that your Java plugins are up to date [[Troubleshoot issues with plugins like Flash or Java to fix common Firefox problems]]
-
Hello, For the last couple of months, I am having issues with one of my tabs or the program itself causing a memory leak. I was hoping that subsequent releases would fix the problem, but when I downloaded V.11 it did not help.
I use tab mix plus and at any time, usually have about 25 tabs open. Everything functioned okay for 8 or so months up until recently.
I am wondering if there is a way to try to track down what is causing the leak. If it is one of my open pages, i will get rid of it. I tried opening one page at a time from scratch, but could not find the issue. .
I always have flash block enabled to cut down on the website junk.
using OSX firefox v11.Now, I'm not going to say it's an Add-On problem because from the research I've been doing on this problem for the last half hour shows that everyone has DIFFERENT add-ons, but everyone's having the SAME problem....
So I went through my add-ons and disabled them one by one, and the single add-on that has been giving me grief is the latest WOT add-on. So, I have Firefox 11 (so does my wife) and we both have the WOT add-on. But that's where the similarity ends... I have Windows 7 x64, she has Windows XP x86.... but she doesn't have the memory leak problem.
What I see is a sawtooth pattern over time. Memory goes up a little over 30+ seconds, then drops down. But over half an hour, the peaks of the sawtooth are larger, and it doesn't drop back down to the same level again - always a little more than before. And before you know it, FF is peaking at 1.5+GB, dropping down to 1.2GB... and FF is running very, very slowly.... excessive disk accesses (paging probably, though I apparently I still have 1.5 to 2.0 GB of free RAM). Killing FF frees it all up, and if I open FF again, it's back to using 250MB of RAM.
So, it's not the add-ons per se, but how they're interacting with FF (or the other way round).... most likely, it's this plug-in container they created to stop add-ons from taking FF with them when they crashed. Seems to have created more problems than it has solved..... would be great if you could choose not to use it.... -
Hi,
I was doing some testing with RichEditableText and realized that the undo and redo when called by keyboard (Control + Z) in Internet Explorer does not work.
Thanks,Hi, Gordon Smith, thanks for answer.
I tried to pass a javascript event to the flash but still the IE does not fire, but by the way there is no way around this situation.
With javascript I tried
document.attachEvent("onkeydown") but doesnt work, this not fires with flash over. -
Help! My DW site displays in FireFox, but does not work in IE
Help! My DW site displays fine in FireFox, but only the background loads in Internet Explorer and I get an error message that the site cannot open. The site is www.bransonareagolfcouncil.com
You've got lots of validation errors:
http://validator.w3.org/check?verbose=1&uri=http%3A%2F%2Fwww.bransonareagolfcouncil.com%2F
Also, this forum is for DW application development. In the future try posting to the Dreamweaver forum. -
HT204022 Flash player required to open a e card does not work?
Flash player required to open e card does not work?
iOS devices do not support flash. There is no flash available, nor will there ever be. Adobe has announced that it is discontinuing development of flash on mobile devices.
Maybe you are looking for
-
HT5312 You never said how can i add a rescue email to my existing account
You never said how can i add a rescue email to my existing account
-
Regarding work flow in the organisation
Hello, I am new to SAP XI. I want to join as a SAP XI developer. So I want to know about the work flow in the organisation. Means who will raise issues and who will take care of it first. and how it will reach to SAP XI developer. What are
-
Printing with Bleed and Crop marks from a PDF made with PS
So, i have created a business card with a .125in bleed all around in photoshop. I know that you can go to File->print->output in photoshop and specify crop marks and the amound of bleed...however, i have saved my business card as a PDF from photoshop
-
How do I reduce the size of large pdf using activex component?
possible reduce pdf size using activex component? also as in menu adobe acrobat "document" -> "reduce file size"
-
Is there ARE-1 & ARE-3 functionality in 4.6c CIN version?
I am working on the roll out of 4.6c.I am facing one problem in CIN. 1. In SPRO ,"Settings under Export regulation" is missing. 2. Excise transaction types (ETT) are not present in CIN: ARE1,ARE3 3. J1IBN01- Creating Excise Bond. 4. J1IA101-