Flash player 10r32 not streaming

Hi, we are using flash interactive server 3.5 and have just noticed that when flash player upgrades to 10r32 the streaming fails? Is this a known issue and does anyone know if it is specifically a rtmp prob? Any help would be appreciated.
Kindest Regards Daran

Hi,
we actually have FMS 3. It appears any browser (well at least ie and firefox on xp) with the latest flash player (10r32) has an issue with RTMPE
Kindest Regards Daran

Similar Messages

Adobe Flash Player video not streaming correctly (since 10/14/11)

Hello!
I'm a full-time, daily user of Flash Player as I got rid of my TV and started depending on websites to watch live TV streaming, full episodes or videos. I've never had any issues with FP working properly until about midnight, FP video streaming is pausing/buffering every 2-3 seconds. I have already spent hours making sure my notebook (which is 3 weeks old) did not have any software updates, pc performance issues, and also ran full scans for any possible viruses through McAfee and Windows Defender which completed sucessfully. Additional maintenance including uninstalling and reinstalling Adobe FP 11, made sure all browser ad-ons were disabled, disabled automatic software to run at start-up, checked for any "failed" updates in history and fixed (1) failed update in Windows, deleted browsing history and cookies, uninstalled any unimportant software such as Bing, checked memory usage, troubleshoot issues in control panel and disabled display hardware acceleration in adoble FP settings per instructions read in online support. I do pay for IT Service through my ISP which was my last attempt to fix this issue, however, I was hoping to get any advise from you first because I did see that there is a note in your website that Adobe is performing maintenance updates at this time, and I'm hoping this might be the reason afterall. I appriciate your rapid responsse to any advise or help before I continue to diagnose any performance isses further with my IT. Thank you so much!!!!

Windows Defender is not an anti-virus program in the traditional sense, it simply sweeps the hard drive for a limited number of known malware and will not interfere with any other installed anti-virus software such as McAfee.
I seriously doubt that the anti-virus software has anything to do with these Flash Player problems at all, but regardless my advice would be to uninstall McAfee and download Microsoft Security Essentials direct from the Microsoft website - this is a full, free, anti-virus suite which also makes Windows Defender obsolete (it will probably remove Windows Defender for you automatically).
There seems to have been a lot of problems for a lot of people with Flash Player 11, if removing McAfee didn't solve your problem then I would advise uninstalling Flash Player 11 (there is a Flash Player uninstaller available on the Adobe website - http://kb2.adobe.com/cps/141/tn_14157.html) and going back to a previous Flash Player version to see if that cures your problem. I am in the process of doing the same thing myself as since updating to 11 my streaming video has been messed up, I can think of no other explanation than shoddy coding / testing in Flash Player 11. The Flash Player 10.3 installer is available here - http://www.adobe.com/support/flashplayer/downloads.html#fp10.3 and here - http://kb2.adobe.com/cps/142/tn_14266.html

Embedded flash player is not working... Unable to play the streaming videos... Browser is hanging many times!!

Hi,
Pls help me to fix an issue with my playbook browser. The embedded flash player is not working... Unable to play the streaming videos... Browser is hanging many times. Restart done, cleared history etc.. Still doesn't work.
Any help would be appreciated.
Thanks.
Solved!
Go to Solution.

Hello ak_kanan,
Welcome to the forums.
Try doing the following. In the browser swipe down from the top and choose Settings, now choose Content, here where it says Enable Flash change this to Off. Now try going to the website that was not working (it will not work again this is fine) Once on the page swipe down from the top again and this time enable the Flash setting. Now reload the page and test to see if you have the same issue.
Let us know how you make out.
-SR
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

Adobe Flash Player 11 NOT working after several attempts to download, uninstall, & reinstall

I have problems with Adobe Flash Player 11 NOT working after several attempts to download, then uninstall, & re-install.
I uninstalled the previous versions of Adobe Flash Player from my computer PRIOR to attempting to install the new 11 version, so now I'm unable to view videos, etc.,
I'm using Windows Vista 32 bit, Internet Explorer 9.0 (which I closed when I got error messages during Adobe Flash Player 11 Installation. I've disabled my AVG -Virus also during the installation of Flash Player 11.
FYI, I'm not computer savvy so the YouTube video by Adobe Tech was too complicated to follow AND I'm unable to view (DUH!) it since I have no Flash Player program installed (doesn't make sense!) .
Thanks for keeping it simple (KISS for me).

I've tried uninstalling and reinstalling some 30 times now ..rebooting, you name it.
I haven't been able to use flash since Adobe kindly shoved that latest update down my computer's throat.
Right after getting the 'successful' installation message I restart IE9 ..go to my channel on youtube and immediately get the message:
The Adobe Flash Player is required for video playback.
Get the latest Flash Player
I tried Chrome and on two or three it worked but then even after closing out of them ..Chrome slowed down to a crawl and finally informed me that Flash had stopped working.
This has entirely wasted 3 nights of my time. It is 2:30 am and I should have had at least 2hours sleep already to rise at 6:30 but no, thanks this I'm still up and no doubt millions of other computer users are having just as much fun.. Everyone I know that allowed the updates to install ..is having the same problem ..Chrome/IE9/Firefox ...you can truly call it Adobe's Universal Cluster ...
I live with Adobe. At work we have 6 fully Adobied LR4/CS5 & 6/InDesign workstations. I'm a photographer using nothing but Adobe products and quite frankly I feel this is the worst treatment you have ever given your customers.
Please stop the CYA and just fix the damm thing! I realize you didn't write it Chris but surely you can get Adobe management to address this instead of just trying to get their users to try and debug it for the airheads that released it. Has anyone stopped to consider the financial damage being done due to videos not playing the ads that support the sites and no doubt stream revenue to Adobe? These guys have rolled the online experience back 5 years minimum and Adobe will probably pay the price for it. Re-issue a working version and go back to the drawing board!

Flash player to watch streamed sports

I need a flash player to watch streamed sports to my iPad 3

IOS device do not support Flash
However Skyfire, Photon, iSwifter, Browse2Go and Puffin Web Browser will provide limited Flash capability

Adobe Flash Player required for streamed internet radio broadcasts

I am not well-versed in the technical aspects of why Adobe Flash Player is not allowed on the iPad2 (and other Apple devices). But I don't
understand how "damaging" is would be to allow its use to enable an iPad2 user to listen to streamed radio broadcasts which--apparently--require Adobe Flash Player.

A quick search of the forum will give you numerous threads that explain the issue. In fact, just look at a couple in the More Like This box to the right of your post.
Best of luck.

Adobe Flash Player "Movie Not Loaded" on Browsers?

On Browsers (Firefox, Chrome) Adobe Flash Player does not display and only shows a white empty space that, when right clicked, says "Movie not Loaded".
Can someone help me to fix this issue?

Im able to stream youtube video.Bt when i try to stream a local video, white
screen occurs.
This is my code
<object width="630" height="312" classid="clsid:D27CDB6E-AE6D-
11cf-96B8-444553540000" codebase="http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=7,0,19,0">
                   <param name="salign" value="lt"/>
                  <param name="quality" value="high"/>
                  <param name="scale" value="noscale"/>
                   <param name="wmode" value="transparent"/>
                  <param name="movie" value="http://geekfile.googlepages.com/flvplay.swf"/>
                   <param name="FlashVars"                              value="&streamName=http://localhost:8080/resources/video/demo-video.flv&skinName=http://geekfile.googlepages. com/flvskin&autoPlay=true&autoRewind=true"/>
                       <embed     width="630"
                              height="312"
                                                              flashvars="&streamName=http://localhost:8080/resources/video/demo-video.flv&autoPlay=true&autoRewind=true&skinName=http://geekfile.googlepages.co m/flvskin"
                               quality="high"
                              scale="noscale"
                              salign="LT"
                              type="application/x-shockwave-flash"
                               pluginspage="http://www.macromedia.com/go/getflashplayer" src="http://geekfile.googlepages.com/flvplay.swf"
                               wmode="transparent">
                          </embed>
            </object>

Flash player h264 live streaming dropping frames

Hi
For some reason i noticed Flash player h264 live streaming is dropping frames very rigorously when streaming to fms 3.5. There are no frames dropped on client camera end. Dropped frames correspond to NetStreamInfo. The output is thus very jerky. This happenbs no matter what settings i use (176 x 144 @10fps). CPU usage is well below 50%.
I noticied that if i stream the same to Red5 1.0 i do not get any frames dropped. The output is perfect as expected. Can some one please help out on this.

Also i can confirm that the encoder used in FMLE and flash player 11.1 or above is not the same. The medium quality preset in FMLE uses "
Bandwidth           300kbps
Quality                Dont know
fps                      20
keyframeInterval 5sec
If i use the same settings in flash player 11.1 i get heavy framedrops and bad playback no matter what quality i use. So this confirms that both encoder are not the same as adobe claims.
On the other hand i sure would love to know why setting bandwidth to 0 creates a smooth stream without framedrops. I will request someone from adobe team to answer me here.

My flash player does not work on my tablet.

My flash player does not work on my tablet

Your tablet uses Android OS.
There is no more Flash Player for Android and there won't be another. Android is no longer compatible with Flash Player. Playing Flash content is very processor consumptive and it drains your battery, also shortening the life of it. Android (Google) recommends using either "Dolphin" or "Puffin" as your browser if you need to view Flash content with a mobile device running Android. They're both free in the GooglePlay store. These browsers use "server side" rendering to reduce the load on your device.

Flash Player Does Not Work with IE8 and Windows XP

I am using Windows XP VR 5.1 with SP3. Flash Player does not function? So videos will not play that use Flash Player. The Adobe Support Site has been 000 Help because it is a free product. Microsoft says it is an Adobe problem. Finger pointing to the nth degree. I have loaded the latest version of Javascript and Flash Palyer.. Any ideas?

Resetting IE is a shotgun approach, but may be much easier (and faster) for a user than trying to troubleshoot and find exactly which add-on, control, setting is causing issues. For a fast approach, you can reset IE, then start re-installing the add-ons you wish to use. Here is a kb that describes the process and even provides a Fix it: http://support.microsoft.com/kb/923737
If you’d like to troubleshoot, here are some steps that will fix most issues with Internet Explorer and Add-ons. This can be more of a scalpel approach, and could help you save your cookies, stored passwords, etc.
1)      Update your Windows software
a.       Follow the steps below to view updates that are available for your computer.
                                                   i.      Click to go online to the Windows Update website
1.       Note: If Microsoft Update is not installed, you will be taken to the Windows Update website. See the note below if Microsoft Update is not installed.
                                                 ii.      Click Custom to check for available updates. In the left pane, under Select by Type, click each of the following links to view all available updates:
1.       High Priority
2.       Software, Optional
3.       Hardware, Optional
                                                iii.      Select the updates you want, click Review and install updates, and then click Install Updates.
b.      What do I do if Microsoft Update is not installed?
                                                   i.      Follow the steps below to install Microsoft Update and check for updates.
1.       Click to go online to the Windows Update website
2.       Click the Go button next to the Get Microsoft Update Today and then click Start Now.
3.       Review the license agreement, and then click Continue.
4.       After setup is complete, click Check for Updates.
5.       Click Custom to check for available updates. In the left pane, under Select by Type, click each of the following links to view all available updates:
a.       High Priority
b.      Software, Optional
c.       Hardware, Optional
6.       Select the updates you want, click Review and install updates, and then click Install Updates.
2)      Turn off Internet Explorer add-ons you don't recognize
a.       When you visit a website, an add-on might be downloaded without your knowledge, or you might be prompted to download an add-on. These add-ons might cause Internet Explorer to run slowly or become unresponsive. You should remove all Internet Explorer add-ons you don't recognize or trust.
b.      How do I spot malicious add-ons?
                                                   i.      You can usually spot malicious add-ons under the Name column in the Manage Add-ons dialog box. Malicious add-ons might have:
1.       Blank names.
2.       Names that include random characters or have a sequence of numbers and letters (for example, fhriduvh.dll or f6rid8vh.exeas as opposed to Windows Messenger).
3.       A publisher name you might not recognize.
c.       How do I disable an add-on?
                                                   i.      Open Internet Explorer.
                                                 ii.      Depending on your version of Internet Explorer, do one of the following:
1.       In Internet Explorer 6, click the Tools menu, and then click Manage Add-ons.
2.       In Internet Explorer 7, click the Tools menu, point to Manage Add-ons, and then click Enable or Disable Add-ons.
3.       In Internet Explorer 8, click the Tools menu, click Manage Add-ons, and then click Toolbars and Extension (if necessary). Also note the drop down list labeled “Show:” You are interested in Add-ons and Downloaded
4.       Follow these steps to determine the version of Internet Explorer you're using:
a.       Open Internet Explorer.
b.      Press ALT+H, and then click About Internet Explorer.
c.       How can I find which version of Internet Explorer I'm using if it won't launch?
                                                                                                                            i.      If you're unable to launch Internet Explorer you can use the following steps to determine the version you're using:
1.       Click Start, click Run, type %ProgramFiles%\Internet Explorer, and then click OK.
2.       Right-click iexplore, click Properties, and then click Version.
3.       Under Item name, click File Version. The version number appears under Value to the right of File Version.
a.       Note:If the file version number begins with 6, you have Internet Explorer 6. If the file version number begins with 7, you have Internet Explorer 7. If the file version number begins with 8, you have Internet Explorer 8.
d.      If you aren't using the latest version of Internet Explorer, consider updating.
                                                                                                                            i.      How do I update to the latest version of Internet Explorer?
1.       Click to download and install the latest version of Internet Explorer
                                                                                                                          ii.      How can I update Internet Explorer without launching my web browser?
1.       Click to go online to the Windows Update website.
2.       Click Custom to check for available updates.
3.       In the left pane, under Select by Type, click Software, Optional.
4.       Select the Internet Explorer update, and then click Review and install updates.
                                                iii.      Click the name of the add-on.
1.       Click Disable. You might have to restart Internet Explorer for the changes to take effect.
2.       Why do some add-ons include (Not verified) in the Publisher column?
a.       If (Not verified) is displayed in the Publisher column in the Manage Add-ons dialog box, the add-on itself is not digitally signed even though the program that installed it might be. A digital signature verifies that a file comes from the person or publisher it claims to be from, and that no one has tampered with it since it was digitally signed.
3.       How do I disable an add-on if I can't access Internet Explorer?
a.       Click Start, and then click Control Panel.
b.      Double-click Internet Options.
c.       Click the Programs tab, and then click Manage Add-ons.
d.      Click the name of the add-on you want to disable, and then select Disable.
e.      When the Add-on Status dialog box appears, click OK to close it.
3)      Perform a free Full Service Scan using Windows Live OneCare safety scanner (not necessary if you don’t suspect viruses and are confident in the protection you have on your machine).
a.       Go to the following website, and then click Full Service Scan: Windows Live OneCare safety scanner
                                                   i.      http://go.microsoft.com/fwlink/?linkid=56726
If you are still experiencing issues, perform these steps. If the issue subsides, you may discontinue the remainder of the steps
1)      Disable all add-ons (one at a time) until you can no longer reproduce the problem
a.       Close all Internet Explorer windows.
b.      Click Start, and then click Control Panel.
c.       Click Network and Internet Connections, and then click Internet Options.
d.      Click the Programs tab, and then click Manage Add-ons.
e.      Click the name of the add-on you want to turn off, and then, under Settings, click Disable.
f.        Click OK.
g.       Restart Internet Explorer. Continue using Internet Explorer the same way you did when you received a crash report. If Internet Explorer continues to crash after disabling this add-on, continue with the next step.
h.      Repeat steps b through g for each add-on listed. When you can no longer reproduce the problem, the most recently disabled add-on is the cause of the problem. Once you discover the add-on that is causing the issues, you can uninstall it (use Manufacturer’s uninstaller if one is provided) then if you wish to continue to use the add-on, install the latest version from the manufacturer’s site.

Flash Player does not work with Standard User, but will work when browser is "Run as Administrator"

I don't understand why this is happening, but Flash Player will not work when a Standard User is using the browser. It will only work when the browser is run as an administrator. Any way to fix this? I've tried to uninstall, and reinstall the player, and it still wouldn't work.
The user is on Windows 7, 64-bit. Using IE 10.
Flash not working for Standard User - YouTube

Any update to provide at all here guys? Again, in my situation, it's very much rights-related as a standard user doesn't even report that the flash player exists when testing it on the Adobe Flash Version Detection website (despite it showing up in Control Panel and under Add/Remove Programs). I've already tried giving the C:\Windows\System32\Macromed and files/subfolders appropriate permissions for the standard user and still nothing. If I either give the user in question full local admin rights or logon as the domain admin, then the Adobe Flash Version Detection website says Flash is installed and Flash works fine.
Thoughts???

Flash Player does not work after steps to resolution

I am using Windows 8.1 and flash player will not work. I have "enabled" and removed Active X control as per instructions but it still does not work.

8.1 means Ie11... and that means...
"User-Agent Strings"
That doesn't mean a lot, I'm sure, but it's the root of your problems, and Flash Player has nothing to do with it.
Microsoft "rewrote" the User-Agent Strings for the abomination they call their latest and greatest browser. User-Agent Strings are what websites use to identify the browser you're using and provide the proper content for it's browser engine, like ActiveX stuff, and Flash or HTML5 video. Thanks to the geniuses in Redmond, WA, the User-Agent Strings for IE11 (which has a Trident engine), ID it as either "Gecko" (Firefox) or "Webkit" (Chrome). Problem is: when the site the directs to the content for one of these two engines, the Trident engine in IE can't intepret it and the site then sees IE as an "unidentified" browser.
The problem with an unidentified browser is that the plug-ins in that browser aren't recognized either, so even though you're up to date, it says you need the latest Flash Player when you use IE11. YouTube... has converted to HTML5 video so if it doesn't detect Flash Player, it can display HTML5 (MP4) video which requires no plug-in to play. Facebook can't do that, because HTML5 doesn't apply to games... only video.
Microsoft has no plans to "fix" the mess thay've created because they think it's a great idea to block you out of the websites you visit.
They recommend using "Compatibility View" and pretending that you're using an older verison of IE... Problem with that is that it's seen limited success, and you have to enable it for EVERY page that has problems... individually.
I'm not big on "pretending" so I recommend actually using another browser.
Firefox (from Mozilla)
Opera (from Opera)
Safari (from Apple)
Chrome (from Google)
ANY of those will work where IE11 won't, with the Flash Player Plug-in (For all other browsers), and Chrome doesn't even need that because it has its own Flash Player plugin built in.

Flash Player does NOT work with Mozilla Firefox

I have Mozilla Firefox on my computer which uses Windows XP 32-bit and the flash player (newest version) simply does not work. I have successfully followed ALL instructions for making it work but nothing has changed. I have an .SWF file that I wish to open but I get the message that flash player is not installed on my computer but it is confirmed as installed. I need it to work but I am not a computer whiz.

Hi! The Shockwave Flash plugin has be disenabled and re-enabled numerous times….
I have Mozilla Firefox 22
These are the files in my \Windows\system32\Macromedia\Flash file:
flashInstall
flashplayer.xpt
FlashPlayerUpdateService
Flashutil32_11_8_800_94_Plugin
genuinst
install
KB923789
mms.cfg
NPSWF32_11_8_800_94.ddl
plugin.vch
I have already spent at least 8 hours trying to understand what to do with no change and as I said before I am not a computer whiz….
Thanks for your help!
Raney

Flash player does not work after I installed it

Flash player does not work after I installed it

I'm using Mac Osx and my browser is Safari
Date: Wed, 5 Feb 2014 00:41:29 -0800
From: [email protected]
To: [email protected]
Subject: Flash player does not work after I installed
    Re: Flash player does not work after I installed it
    created by Mike M in Installing Flash Player - View the full discussion
This is a user-to-user forum, NOT 24/7 support. You're "lucky" I happen to be up at 1:40 am to answer you.
What OS are you using?
http://mmonlinedesigns.com/images/os.png
What browser?
http://mmonlinedesigns.com/images/browsers.png
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/6087541#6087541
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/6087541#6087541
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/6087541#6087541. In the Actions box on the right, click the Stop Email Notifications link.
           Start a new discussion in Installing Flash Player at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

Flash player does not work in Windows 8 tiles

Flash player does not work in Windows 8 start metro tile applications. Flash player also does not work in Windows 8 start tile internet explorer 10 1n windows 8. Flash player does work in Windows 8 desktop internet Explorer 10. I tried all of the recommended fixes suggested by adobe Flash Player Issues/windows 8 page. I have reinstalled Windows 8 operating system. What should I try next?

This is a known issue with Flash Pro CC - GM build.
this crash has been fixed in the update that was released recently. Please update to 13.0.1.808 version and it should fix this.
Please reply if it still persists after the update.
-Sujai

Flash player 10r32 not streaming

Similar Messages

Maybe you are looking for