Flash player 11.0.1.152 installation problem with Windows Vista 64-Bit

Hello,
I just can't get Flash Player to install on my computer with Windows Vista 64-Bit - doesnt matter if I try with Firefox, Opera or IE (I usually use Firefox).
The download isn't a problem, but when I start the downloaded .exe, this file just disappears from my download folder and nothing happens - besides starting a process called install_flashplayer11x32_mssd_aih_3.exe, which does nothing. The usual installation popup never appears. After that I can't try starting the installation again, until disabling the process via task manager ("Only a single instance of this application may run"). Doesn't matter if I try the download and installation with or without "McAffe Security Plus" btw - same result.
I never had such a problem before - Flash Player 10.3 was and is no problem to install and use.
I have tried all the measures suggested in the troubleshooting section on the official site, including the advanced troubleshooting measures (uninstall old version, run as administrator, disabling software firewalls, disabling virus scanner etc.). Nothing helps.
I don't got those problems with my laptop running Windows 7 - just my desktop computer with Vista 64-Bit.
Any help would be greatly appreciated.

Try using the installers from the links in http://forums.adobe.com/thread/909550
P.S. topic moved to the Installation section of the forum.

Similar Messages

Is Flash Player 11.7.700.224 really compatable with Windows Vista 64-bit?

I ask this question because under System Requirements, Window Vista 64-bit isn't listed. I've inserted the link for the system requirements below...
http://www.adobe.com/products/flashplayer/tech-specs.html
I'm trying to figure why my Flash Player disappears from time to time when I'm watching a clip/video and then my Internet Explorer 9 typically stops working, it closes down, and then it opens up and asks me if I want to restore the browsing session. I'm thinking that this has to do with having both Internet Explorer 9 32-bit and 64-bit. I read online that Internet Explorer 9 has both and this is why I'm questioning whether Flash Player 11.7.700.224 might be contributing to this issue or was Window Vista 64-bit left off the system requirements in error?
Thanks!

Try using the installers from the links in http://forums.adobe.com/thread/909550
P.S. topic moved to the Installation section of the forum.

Please Help! Problems with Windows Vista 32-bit on Boot Camp (Wireless/Etc)

We recently purchased a new aluminum Mac Book (13 inch) with Leopard (10.5.4). I attempted to install Boot Camp and Windows Vista 32-bit. I can successfully alternate between both operating systems with no problems. However, I am having 2 problems:
1) I cannot connect to wireless internet. No connections will even show up when I attempt to connect, its almost as if an adapter hasn't been installed.
2) I cannot set up the trackpad to do right click.
I've read articles everywhere and nothing has helped. Can anybody please help me??? Any support/advice is greatly appreciated. Thanks in advance!
- Pierce

dpierceNKC:
Welcome to the Apple discussions.
It appears that you may not have installed the boot camp drivers. Boot into Windows and insert your Leopard installation disk in the CD/DVD drive. This should automatically begin installation of the necessary drivers. Reboot the computer when instructed and all the hardware should work as designed.
The right click is accomplished by placing two fingers on the trackpad and then depressing the trackpad button. This should also work after the drivers are installed as instructed above.
Axel F.

IPod nano installation problems with Windows Vista

I purchased an iPod nano today and have not been able to install iTunes. There are instructions for Windows XP but not much help for Vista. As of right now I am very unhappy with my purchase and if I can't get help soon I am going to return it. I have heard so many good things about iPods but I haven't had any good experiences yet. Please help!!
HP E6400 Windows Vista
HP E6400 Windows Vista

I, too, just bought my first ipod and have Windows Vista. I purchased songs through iTunes and tried to drag them to my ipod icon, but it said that I was not authorized on this computer! I called tech support for HP and they said it's a compatibility issue and to contact Apple about it to fix it. Before I do so, I am checking here first, just hoping there would be a really easy fix for this problem. I'm regretting getting Windows Vista now for many reasons, this being the latest. Any advice?
HP Pavilion Notebooj Windows Vista 2 GB ipod Nano

ITunes 7.6 "invalid signature" installation problems with Windows Vista

I updated my 160Gb Classic to the latest firmware and then up pops: "The iPod cannot be used because it requires iTunes version 7.6 or later. Go to www.itunes.com to download the latest version of iTunes."
Everytime I start to download the lastest version of iTunes, Quicktime 7.6 and Safari I get a pop up window saying: "itunes & quicktime has an Invaild signature and won't installed" and the same happens with Safari.
I've turned off my popup blocker as was one suggestion, but still no luck. Am I being a Dunce and missing something?
I'm on dial up and downloading an entire version of iTtunes takes ages, but Download Express usually helps cut this time in half.
Would anyone have any ideas please on how to reslove this please? My iPod doesn't even show up in iTunes, just the message saying to update to the latest ver of iTunes. I'm running Windows Vista 32Bit

Heej
I'm having the same problem
Did you allready found a solvation for it?
Thanx very much
I'm going crazy that I can't put any music on my ipod=(
Paulien

Oracle database 11g release 2 installation problem on windows 7 (64-bit)

First of all my windows is not genuine, but on my friend's desktop oracle download and installation worked fine, he chose "create and configure database" options, and it works very well on his desktop, though his windows is also illegitimate. In my case, when I select "Create and configure database" option and pressed 'next",
(Go to my blog to see it with snapshots: Computer Science: Oracle database 11g release 2 installation problem on windows 7 (64-bit))
it asks to select class, I select "Desktop class" and pressed "next". The moment I pressed "next", the whole setup thing disappeared like it was never started. I searched for all possible reasons for why its not getting installed on my laptop, I used registry cleaner s/w, deleted 25 GB of data to create free space if it were the problem, increased the virtual memory to increase the space for RAM, I did almost everything to get this setup working, but I found no success with the "Create and Configure database" option
and
then
I chose a "database software only" option and chose to store in a folder w/o spaces. This way, I got database s/w only and then later I found "Database configuration Assistant (DBCA)" from windows START button and clicked to create and configure database manually. The steps are pretty much interactive and doesn't involve much brainstorming.
The values I filled for
1) Global Database Name : orcl
2) System Identifier : orcl
3) I chose common password for both SYS and SYSTEM
4) while on Enterprise Manager Configuration step, It asked me to create and configure listener in oracle home, so for that too, I typed "netca" in windows START menu and clicked it. There I added a listener.
5) I chose a Storage area which was the Oracle-home itself i.e. where our installation files goes , in my case it is : C:\oracle_base\product\11.2.0\dbhome_1\oradata
6) Then after few more nitty-gritty clicks, we are set to go !
Finally to write SQL code and to create your first TABLE , type "sqlplus" in windows "START" menu and click it when it appears. A command-prompt like window appears , which will ask you for username and password, so here they are :
Username : sys/ as sysdba
Password : (its the one you created in step 3 stated above )
After this you are ready to write your first SQL command.

Is this your solution to your original post at Oracle database 11g release 2 installation on windows 7 (64-bit) ?
Pl be aware that you should not create any custom objects in SYS or SYSTEM schema - you should create any such objects in a separate custom schema.
About Database Administrator Security and Privileges

Lightroom 3.2 Installation Problem on Windows 7 64-bit

Lightroom 3.2 Installation Problem on Windows 7 64-bit
I can't install Lightroom 3.2 (German) on my computer (Windows 7 Professional 64-bit).
While copying the extracted program files the following error message appears:
An error occurred during the installation of assembly component {6435B7C0-E0C8-3EA2-91AE-7640034EAFCE}. HRESULT: 0x80070002.
I found out that other users had the same problem, and couldn't find a solution.
Perhaps it is a Microsoft .NET Framework related problem. But after installing .NET Framework 4 nothing changed.
Thanks for ideas to solve the problem.

Thanks for your advice, Mr. McLion.
I downloaded the 3.4.1 version and started the installation as administrator. Unfortunately the same error message occured again.
Then I tried to install the 32-bit version (although I prefer a 64-bit program on a 64-bit operating system). A similar error message appeared at the same point of installation progress, but with another combination of numbers and letters in brackets.

IPhone 3GS SYnc problems with Windows 7 64 Bit

I am having sync problems with windows 7 64 Bit.
The iPhone syncs a few tracks then hangs, a few minutes later itunes tells me the iphone has timed out.
Anyone have any ideas about this. I have tried different USB ports, cleaned the apple USB cable contacts with Servisol, restored the iPhone and reinstalled itunes.
iPhone and iTunes are latest versions.
Thanks
Joe

"Try this connect the iPhone, let the mtp driver installation fail, then go into the device manager and uninstall the unknown mtp device. If you then scan for new hardware from the device manager it should recognize the iPhone & update the driver."
Ok here's what I did:
1) Connect the iPhone (iTunes had been installed)
2) No MTP driver installation is happening as Windows detects iPhone successfully
3) Open Device Manager
4) There seems to be 2 drivers for iPhone that are active now, although I still can't see which one is the MPT driver you're referring to.
One of them sits under Portable Devices: "Apple iPhone". If I view the details of this driver, it lists the following files:
- C:\Windows\system32\DRIVERS\UMDF\WpdMtpDr.dll
- C:\Windows\system32\DRIVERS\winusb.sys
- C:\Windows\system32\DRIVERS\WUDFRd.sys
- C:\Windows\system32\WpdMtp.dll
- C:\Windows\system32\WpdMtpUS.dll
The other one sits under Universal Serial Bus controllers: "Apple Mobile Device USB Driver". And as indicated by Joe above, it lists the following files when I view the Details:
- C:\Windows\system32\Drivers\usbaapl64.sys
- C:\Windows\system32\usbaaplrc.dll

I am trying to install itunes on my hp laptop with windows vista 64 bit. But when i install i get this error "An error occured during the installation of assembly "Microsoft.VC80.CRT.type="win32"version="8.0.50727.6195".publickeyTOken="1fc8b3 b9a1e18e3b".

I am trying to install itunes on my hp laptop with windows vista 64 bit. But when i install i get this error "An error occured during the installation of assembly "Microsoft.VC80.CRT.type="win32"version="8.0.50727.6195".publickeyTOken="1fc8b3 b9a1e18e3b".processorArchitecture="x86""

Repair your Apple Application Support.
Control Panel > Programs n Features > highlight AAS, click CHANGE the REPAIR

Problems with Windows VISTA and WPA-2

Hi Guys,
I am using a Linksys router supporting draft-N; it seems that after some time of usage; Windows Vista stop being able to connect to Linksys using a WPA-2 PSK.
Everytime you search for the SSID and attempt to connect, the ''network is taking too long to connect''' and Windows always informs the user that ''limited or no connectivity'' even though the signal strength is excellent.
Is that a common problem in Windows Visa (I am using Home Edition)?

Yes thats the basica command problem with Windows Vista while connecting to the Wireless Network.... In this you can need to update your Windows Vista OS with all the Latest Patches and the Service Pack to improve more stability on your Vista Computer to get connected to the Wireless Network..

Photo sync problem with Windows Vista?

I did some searching and was wondering if there is a solution to the photo sync problem with Windows Vista. I have gone the route of changing some of my photos to bitmap files but this is was way too much work just to view on ipod. I like to email Apple but could not find a link to do so. As far as I know I have all updates but still the iPod does not sync photos. Is there an update to this that I am missing or am I stuck changing all my photos to .bmp files?
Thanks,
Dean.

I checked out the article and not much help, thanks anyway.
Would it make a difference if I purchased Adobe Photo Album or would I still be stuck with changing and saving files to .bmp extensions? I have Adobe Photoshop album starter but still have to change file extensions.
If someone has a solution to this problem I would really be greatfull. I did contact Dell as this is a brand new computer and that was a wash. They did give me a number for Apple but of course I bought the iPod off of ebay and has no warranty on it so unless I pay a fee I'm not calling. It just blows my mind that Microsoft and Apple can't or won't come up with a fix. But I guess when Microsoft wants you to buy the Zune or Apple wants you to buy the overpriced Macintosh why would they waste time on having there products compatible with each other.
Thanks.

CS3 Master collection installation problem on Windows 7 64 bit

Hi Guys
Please can you advise
I am encountering problems with the installation of CS3 Master Collection on Windows 7 64 bit, initially my hard drive crashed and performed a dump.
Subsequent attempts to install CS 3 has resulted in failure to install 12 components, essentially the individual software products including photoshop, encore, illustrator etc.
I have re-performed the installation several times with the same installation error.
I believe CS3 to be compatible with Windows 7 64 bit
Any thoughts, guidance on how to rectify the problem and achieve successful installation.
I do have Adobe Reader X and Flash player X already installed. I assume these should not cause an issue with the CS3 installation
Thxs in anticipation

Na, you have it all backwards. CS3 is neithe officially tested nor endorsed, certified or supported on W7. Many users still use it succsfully, but there ae no guarantees whatsoever. Furthermore using Acrobat X ma exactly be the problem due to certain PDF components being shared acoss apps and newer versions not being compatible with the old installer. Therefore removing those parts and reinstlling them later is advisable. Beyond hee's a procedure that should work:
- use the Creative Suite Cleaner Tool
- install CS3
- uninstall CS3 via the Add or Remove Programs system control panel
- install CS3 again
This convoluted procedure is necessary due to bugs in the installer which otherwise prevent things from working.
Mylenium

Is flash player 11.3 compatible with Windows vista 64 bit?

I don't have major issues with the video and sound (the flash player used to crash frequently but that seems to have been resolved). But I can't adjust the volume with the volume control wheel when I watch videos on firefox. When I check volume mixer the flash player is tied to the speaker, not firefox.
The product description for flash player 11.3 seems to suggest that it will not support Windows Vista 64 bit. Should I revert back to an older version? What's the most straightforward way to do that? Is the Adobe team fairly close to finding a solution?
Much thanks to anyone who provide some answers for people who aren't computer savvy - like me.

Previously, with separate 32-bit and 64-bit installers, you could run the 64-bit installer on Vista, and it would work correctly. However, it was not officially supported by Adobe.
Now with the 11.3 combined installers, I do not know what it installs on Vista. I do not have Vista available, so I cannot test it. Can you tell me what files you have in
C:\Windows\system32\macromed\flash ?
C:\Windows\syswow64\macromed\flash ?

Installation problem: IIS 7, Vista 64 Bit

Hi all!
I tried to install EPM 11.1.1.1 on my laptop (Vista Business, 64 Bit) and have a problem with the installation of HFM Web Application and other components of EPM 11.1.1.1, witch needs IIS.
After I've got the error "Products needs IIS to be installed" for the first time, I installed IIS 7.
Now the IIS is running - I hope (However I'm able to open the standard web site http://localhost/), but I'm still getting the same error.
How can I check, if IIS is running?
Could someone tell me, what I maybe forgot or what I have to consider? Do I have to make some IIS settings? I already allowed all isapi and cgi extensions.
Could Vista or the 64-Bit system version be the source of my problem? Why HFM does not recognize the installed IIS7?
Do someone have any ideas?
Thanks in advance!
Alex
Edited by: alta on 02.12.2008 10:51

Most people are going to tell you to use a supported Operating System. If this is a production installation then install a supported OS -- I'm presuming this is not a production or multi-user system and iis a personal development system.
This post seems to have an answer to one of the main problems with a Vista install - Re: EPM System 11.1.1: OpenLDAP & WIndows Vista Issue
You may encounter issues with Performance Management Architect and IIS7 and those are likely much more difficult if not impossible to resolve -- if you want to use classic applications then just select apache when you deploy Workspace and do not install Performance Management Architect.
Let us know how it goes.
Regards,
-John
Edited by: Jbooth on May 13, 2009 8:54 PM

How to install Flash Player with Windows Vista 64 bit?

IE 9, Windows Vista 64-bit, Flash Player quit working and won't install. Error Adobe Flash Player 11.1.102.55. I have deactivated User Accounts and Security, gone to Windows\SysWOW64\Macromed\Flash and Run as Administrator NPSWF32_FlashUtil, and still not working. One suggestion was to run an add-on from Macromedia, but that failed and I don't know what the add-on was. Have also run System Restore and restored all my Internet security setttigs to default. Nothing is working!

If you can not see the moving sphere: http://kb2.adobe.com/cps/155/tn_15507.html
Check the following:
Enabling Flash Player in Internet Explorer 9
ActiveX Filtering in Internet Explorer 9
Also check this:
In I.E.9, click Tools, click Internet options, click Security tab, ensure that the Internet security level is Medium-high.

Flash player 11.0.1.152 installation problem with Windows Vista 64-Bit

Similar Messages

Maybe you are looking for