Flash player 9 beta does not install on opera 9 mac (intel)

Hi All,
I installed the latest opera 9 on my new intel mac. Then I
tried to install the flash player 9 beta for intel mac. the player
was correctly installed on all the browers (firefox, sarafi) except
opera. There was no error messages shown during installation, but
when I tried to view flash content in opera, there is just simply
nothing showing (getting a blank area instead). Any idea what the
problem is?
Cheers,
Larry

just a follow up.
Does anyone have any idea why the beta flash player 9 can not
be installed into opera on mac intel?
Or there is something wrong with my installation?
please help,
Thanks

Similar Messages

  • Flash Player 9 does not install / run on Mac OSX

    Hi:
    I had Flash Player 9 working fine on my Mac, G5 running OSX
    10.4.10. Flash 9 worked in both Safari and Firefox.
    I visited a website that incorrectly told me I needed to
    update flash:
    http://www.thehdweb.com/
    I followed the link to the correct part of the Adobe site,
    downloaded the Flash 9 installer and ran the installer.
    All Flash has stopped working.
    I am stuck.
    I need ideas. I have looked for how to uninstall flash and
    cannot figure that out yet..
    Steve
    stephen (at) ackroyd (dot) com

    Did you find a solution to this problem? I'm running into the
    exact same issue. Also tried to uninstall (using the Adobe
    uninstall utility) and re-install; keep getting the "succesfully
    installed" message, but still not working.

  • Flash Player 11 does not install Plugin

    I have a Windows 7 workstation with IE9 that will not install the plugin.  I have used the Adobe uninstaller rebooted installed with a saved copy of Flash player but it will not install the Plugin.

    brianmoskowitz wrote:
    I have a Windows 7 workstation with IE9 that will not install the plugin.  I have used the Adobe uninstaller rebooted installed with a saved copy of Flash player but it will not install the Plugin.
    Please see this KB article: http://forums.adobe.com/thread/867968

  • Switch to flash player beta link not appearing

    sir i have a problem relating to watching youtube video
    As on opening any youtube video, the link of "switch to flash player beta" does not appearing after a reset of my phone
    It flash player also does not appearing in software update. (Nokia 5530 xpress music)

    Flash Player 12.0.0.47 (Mac OS X)
    Safari and IE are BOTH doing this. Don't know why, but it started with the FP 12 update.

  • Flash Player 10 does not work in IE or Firefox. What could it conflict with?

    I'm  using Firefox 3.6.8 (and sometimes IE 8.0.6001.18702IC) on Windows XP Pro, SP 3.
    For some weeks now, I have been unable to hear any sounds on anything Flash-based, from YouTube to games at MSN.com or embedded videos on any site using Flash.  Initially I had assumed it to be because of having QuickTime installed because I know QT likes to hijack everything.  I uninstalled QT (and Real Player) and Flash Player then reinstalled Flash Player (and Shockwave Player just in case) and guess what?
    Yup.  Nothing.  When I uninstalled everything, I used a program called Revo Uninstaller, which includes a registry cleaning option.  I then used Abexo and WinASO's registry cleaners to make sure I got everything else that even looked like QuickTime off my hard drive.
    When I reinstalled Flash, the following programs appeared in C:\Windows\system 32\Macromed\Flash:
    Flash 10i.ocx (10.1.82.76)
    FlashUtil10i_ActiveX (10.1.82.76)
    FlashUntil10i_Plugin (10.1.82.76)
    genuinst (6.0.2800.1531)
    FlashUtil10i_ActiveX.dll (10.1.82.76)
    NPSWF32.dll (10.1.82.76)
    KB931433
    FlashInstall
    Install
    Flashplayer.xpt
    When I check IE's "Tools" and look for add-ons, it says that Flash (Shockwave Flash) is enabled.  I even enabled the other Adobe add-ons for Acrobat and such just to be sure.  Firefox shows Shockwave Flash and Shockwave for Director both to be enabled.  The Flash control panel settings don't help: I have all sites set to store about 100 KB on my computer to make sure there's enough room for everything but still nothing.
    Before anyone asks, my audio drivers are up to date, thanks to the manufacturer's website.  I have DirectX 9.0c installed and everything else works fine.  I can play audio and video elsewhere with no problems.  It's only Flash that's showing me this trouble and there's no hint as to what else could be interfering with Flash.
    Any ideas?

    Well, great.  I tried the uninstall/reinstall before, but not with the uninstaller, so I was hopeful that this time might do it.  No such luck.  The video still plays, but no sound.
    All the sound settings are working with everything else from games to media players.  I set Windows' firewall to allow both the ActiveX and plugin for Flash, just in case.
    In the Flash folder, I now have:
    Flash10l.ocx (10.1.102.64)
    Flash Util10l_ActiveX (10.1.102.64)
    FlashUtil10l_Plugin (10.1.102.64)
    Genuinst (6.0.2800.1531)
    FlashUtil10l_ActiveX.dll (10.1.102.64)
    NPSWF32.dll (10.1.102.64)
    And the setup and text files that went with 'em.
    I've also done a system restart since then and zip.
    I went through IE and Firefox and looked for any file associations (like .flv) that I could manually change over to using Flash, but no go.  The settings panels for Flash have all been set to allow YouTube specifically (as a test) and to allow 10KB of storage space for all affected sites.
    Now what?  I'm really not looking forward to a reformat and reinstall, but it's looking like that's what it's going to take.
    Date: Sun, 14 Nov 2010 17:37:07 -0700
    From: [email protected]
    To: [email protected]
    Subject: Flash Player 10 does not work in IE or Firefox. What could it conflict with?
    Something is strange with your list of modules; you list FlashUntil10i_Plugin (10.1.102.64), but this is really 10.1.85.3
    I recommend that you uninstall Flash Player completely (using http://kb2.adobe.com/cps/141/tn_14157.html), then restart Windows, and delete all remaining files in C:\Windows\system32\Macromed\Flash.
    Next reinstall both ActiveX (http://fpdownload.adobe.com/get/flashplayer/current/install_flash_player_ax.exe) and the plugin (http://fpdownload.adobe.com/get/flashplayer/current/install_flash_player.exe).
    After that, if the problem persists, have a look at this page http://kb2.adobe.com/cps/837/cpsid_83739.html
    >

  • Flash Player Content does not Minimize when Firefox does

    When Firefox is Minimized, Flash Player Content does not.
    It shows it perfectly with other opened (not minimized) applications in the exact location where it was (the flash content) before. The other application seems to need an RGB colour map of exactly #000000 for it to show.
    It cannot be captured in a screenshot using screengrab, nor can it be shown in playback from recordmydesktop.

    How about the screen saver that kicks in...
    It can even be worse when you also get a red/blue color swap.
    *https://bugbase.adobe.com/index.cfm?event=bug&id=3109467
    Unfortunately Adobe no longer maintains Flash on Linux, so Flash 11.2 is the latest and Adobe has no intention to fix any issues in this version apart from security updates.

  • In manage add-ons, it shows Shock wave as enabled but Flash Player still does not work.

    In manage add ons, it shows shock was as enabled, but flash player still does not work

    TryDisabling ActiveX Filtering in Internet Explorer

  • Can I download the stand-alone Flash Player that does not need a browser? I have ver 11.5 r502 that I d/l last year; would like a newer release.

    Can I download the stand-alone Flash Player that does not need a browser? I have ver 11.5 r502 that I d/l last year (11 Feb 2013); would like a newer release.
    Can't find much about the standalone viewer, except in the Flash Builder docs, which says a .swf can specify to use it. I can't find a download link.
    Thanks, Doug

    You can download the standalone player (Projector) from https://www.adobe.com/support/flashplayer/downloads.html
    Note that the download is the player, not an installer, so you need to make the .swf file association manually.

  • Flash Player 8 Won't Install On My Mac

    I find Flash Player, version 8.0 to be rather difficult to
    open on my computer. Simply put, my computer is a PowerMac 4,2 (OS
    system is 10.4.6) that has a 2.0.3 version of the web browser
    Safari on it (plus over 4 GB of memory leftover) and it refuses to
    install. This is all supposedly a supportable version of operating
    systems, memory & web browsers, according the support center.
    I’m allowed to download it and open up the
    application, but as soon as I get to the first installation window
    (where it tells me to close all browsers), I close my browsers and
    the same screen shows up no matter how many times I click on the
    button “install.”
    What's wrong here?.
    How can I get this application to install properly as it
    should?
    SOMEONE
    please respond ASAP.

    Thanks for getting back. Yes, as I mentioned, I did uninstall all other Flash Players and restarted because I had read about that tip. I also tried downloading it from the .pkg and no luck there. Also from Safari instead of from Firefox. Is this Flash Player 10.3.183.7 a stand-alone plug in or is it an update to one I should already have? Also, what is the Flash Player Debugger for. I am a mac OS 10.6.8, intel based. Any other suggestions are appreciated.

  • Help for Flash player that will not install

    Flash player won't install on  Dell with Mozilla Firefox version 33.0 for Yahoo 1.32. It does not matter what I try or even if I delete all old flash player files, folders etc. The download goes as far as the black box where it should be installing and just freezes there. I have pretty much tried everything to get it t0 install, including your troubleshooter. I also checked on Firefox and there is no available plug in download for the flash player. I even uninstalled and reinstalled Firefox and that will still not work. I tried to download using just Internet Explore 11 and that wont work either. It saves the file and I can make it run, but it goes directly to the black box fr Adobe flash player installation and is blank and will not go any further. help please!!!

    Hi
    I read your post about having difficulty downloading flash player 10 but that you also were able to fix the problem. I  use IE8 and my operating system is XP Professional SP3. I'm hoping that you can answer a question for me.
    In the troubleshooting tip issued by Adobe one of the things to do was to check my sercuity program. I use Norton and currently Adobe Flash player isn't in the list of allowed programs under my internet settings. My question is, would it be ok to drop the executable file of the Flash Player that is currently on my desk top, drop it into the programs file? There is a folder with all of the other Adobe programs in it because then I could select and add to the allowed programs in my Norton.
    I hope someone can answer this for me.
    thanks,
    Ellen

  • Flash Player 10 does not work on certain websites

    Hi,
    Just installed Falsh Player 10 onto my imac G5 (mac os x tiger 10.4.9, power g5). It works fine for you tube and plays certain flash content but, when accessing channel 4OD, E4 and  ITV player it does play the videos.  Also when i try to adjust the flash setings by 'ctrl click' it does not allow me to access any of the tabs or uncheck the options.
    Am completely baffled as to why this is happenning especially when i have checked several times to see if the player is installed properly, which it is.
    Be absolutely grateful if anyone can tell me what the problem is.
    (have also checked my mozilla preferences and they don't seem to be relevant in solving the problem)
    Thanks,
    Kai

    Some websites claim that they required Flash Player, when in fact they mean Shockwave Player.  Try installing Shockwave Player, and see if this fixes the problem.
    As for the Flash Player Settings; on Windows this can usually be cured by deleting the folders where these settings are stored.  Unfortunately I don't know where that is on a Mac, but possibly you can find this information in http://www.adobe.com/devnet/flashplayer/articles/flash_player_admin_guide.html

  • Flash player 13 does not play our widevine content.

    This is strictly related to the flash player version, since all our tests show that flash player 11 and 12 works fine on PC/MAC all browsers, and never with flash player 13. The video process goes all the way to decrytping the conent, since you can see frozen images when you scrub the video, but it does not actually play the content.
    I have read the release notes, but can't find anything useful.
    /Svante

    http://forums.adobe.com/message/4041846
    Give it a clean install.

  • Flash player 64 bit not installing properly

    I have not been able to use flash player on my windows 7 64 bit computer. It kept showing up in the computer settings as flash player 32 bit and the flash player does not work on my laptop. Any suggestion?

    You need to provide more details; "not able" and "not work" doesn't mean anything.  Also, what browser do you use?
    Flash Player will automatically install both 32-bit and 64-bit versions on a 64-bit system; you cannot get only a 32-bit version on a 64-bit system.

  • I download adobe flash play as prompted by youtube and return to sight and the sight says to download latest and greatest adobe flash player again, does not seem to recognize

    i download adobe flash player as prompted and it does not seem to be recognized.

    Go to Apple > System Preferences > Flash Player
    and check to see if your Flash Player is up to date.
    11.9.900.170 is the latest version.

  • The flash player installer does not start

    Operating system version:  Windows 7 32bit
    Web browser and version  Firefox 34.0
    A brief explanation of the problem, including exact error messages received
    When I try to start the installer it doesn't start visually. It  Meaning, it appears for several seconds as a process in the Task manager, but it closes after a few seconds.The windows prompts me if the program can make adjustments to my hard drive and I accept it.
    If I try to run it twice, in the short time window when it`s visible in the Task manager, there`s an error message that the installer is running.
    Please, if you have a suggestion why this is happening, share it with me.
    I apologize if there`s such topic available but I was not able to find it.
           Regards,
               Jigi

    Hi Georgi Filipov,
    Are you using the online installer (about 1.2 MB file size)?  If so, please try the offline installer, posted at the bottom of the Installation problems | Flash Player | Windows page, in the 'Still having problems' section.  There are three different files and you'll want the one(s) that corresponds with the browser(s) you're using.
    Maria

Maybe you are looking for

  • How to modify standard or custom Interactive Reports

    Hello everyone! Is there a possibility to modify SAP standard Interactive Reports? Where can this be done? Also if I create a new custom Interactive Report using Wizard in WebUI I don't find any transaction where I can modify it. Should I use some SA

  • Audio crackle with Macbook pro & Panasonic HD Deck

    Heres the Setup. MacBook pro, Panasonic HD 1200a, FCP 5.1.4, QT 7.2 and firewire 400 to deck. When mastering to HD tape. There is a crackle sound in the audio. Only with MacBook, doesnt happen when mastering with SDI. I heard there is a fix with Fina

  • Gnome 3.2 power management

    Hi everyone! I installed gnome 3.2 from unstable, and I notice that now my power management is worst than ever. The problem is that my graphics card, nvidia nvs 3100m, has some problems with DPMS. I can set the screen off with dpms, It works, but mou

  • Help with apple support

    Hello everyone, first of all sorry about my English, but i think it doesn't exist a Community of Apple in other lenguages like Spanish. i have opened a case in the Spanish Apple Suport since November 20th becouse of a problem with the configuration o

  • Displays preference pane not working?

    I am on a new MacPro 2.66 Dual running 10.4.8 with a brand spankin' new 20" NEC MultiSync LCD 2070NX display. I am trying to calibrate my monitor so I can get back to one of my daily duties - color correction. I have the NEC display software installe