Flash Player doesn't work after upgrade
I have Windows 7 Home Premium and I'm using IE 11. I have tried uninstalling/installing, deleting all files mentioned in multiple posts, used Firefox in attempt to install--all leave me at step 1. At best, the files appears to download and install correctly, but when I try to use it on multiple sites (Facebook games, YouTube, etc.), they all state that I need to install the latest version of Flash Player, which I just did. I tried the usual restart/shutdown/etc., all at periods as noted in posts. I have tried to download older versions of Flash Player, and I'm having the same issues. All Windows items are updated. I do not have any virus software running, and I have never had any problems with the updates in the past. Any help would be appreciated. Thanks.
Download this file: deepclean.zip
Unzip it.
Double click the deepclean_set.bat file. A command prompt window will open, and when the Disk Cleanup opens, check EVERY box in the list and click OK.
Double click the deepclean_run.bat file. The command prompt will open again and the Disk Cleanup will run, cleaning system cache files and other unnecessary items that may be responsible for your issue.
It may take a while to fully clean up your Hard drive.
DON'T close the command prompt window. It'll close when the cleanup finishes.
Afterward, download the Adobe Flash Player uninstaller and installers directly by right clicking the following links and selecting "Save target as" (IE) or "save Link as" (Firefox).
Flash Player Uninstaller
Flash Player for ActiveX (Internet Explorer)
Flash Player Plug-in (All other browsers)
Save the files to your Downloads folder - DO NOT RUN anything yet.
Reboot your system.
BEFORE opening anything, go to your Downloads folder and run the UNINSTALLER, then the ActiveX installer, and lastly the (other browsers) installer.
Similar Messages
-
Macbook air adoble flash player doesn't work after installation
macbook air adobe flash player doesn't work after installation
If you're sure you've installed the latest version of Flash, take each of the following steps that you haven't already tried. After each step, relaunch Safari and test. For a "missing plug-in" error, start with Step 7. Back up all data before making any changes.
Step 1
You might have to log out or reboot before a Flash update takes effect.
Step 2
In the Safari preference window, select
Privacy ▹ Remove All Website Data
Close the window. Then select
▹ System Preferences… ▹ Flash Player ▹ Advanced
and click Delete All. Close the preference pane.
Step 3
If you're only having trouble with YouTube videos, log in to YouTube and load this page. You may see a link with the text "Leave the HTML5 Trial." If so, click that link.
Step 4
If you get a warning of a "blocked" or "outdated" plug-in, then from the menu bar select
▹ System Preferences… ▹ Flash Player ▹ Advanced
and click Check Now. Quit and relaunch the browser.
If the warning persists, triple-click anywhere in the line below on this page to select it:
/System/Library/CoreServices/CoreTypes.bundle/Contents/Resources
Right-click or control-click the highlighted text and select
Services ▹ Open
from the contextual menu.* A folder should open. Inside it, there should be a file named "XProtect.meta.plist". If that file is missing and you know why it's missing, restore it from a backup or copy it from another Mac running the same version of OS X. Otherwise, reinstall OS X.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar and paste into the box that opens (command-V). You won't see what you pasted because a line break is included. Press return.
Step 5
Open this folder as in Step 4:
/Library/Internet Plug-Ins
Delete the following item, or anything with a similar name, if present:
Flash Player (failing).plugin
You may be prompted for your login password.
Step 6
Re-download and reinstall Flash. Download it from the domain "get.adobe.com". Don't click a link from any other website, including this one, because you can't trust links. They may be an attempt to trick you into installing malware masquerading as Flash. Type the address into the browser window. Never download a Flash update from anywhere else.
Step 7
If you get a "missing plug-in" error, select
Safari ▹ Preferences... ▹ Security
from the Safari menu bar and check the box marked
Allow (or Enable) plug-ins
Then click the button marked
Manage Website Settings...
if present and make sure that the website is not blocked for Flash.
Step 8
Select
Safari ▹ Preferences... ▹ Extensions
from the Safari menu bar. If any extensions are installed, disable them. -
Flash Player doesn't work after update
I'm using windows 7 with Firefox browser. I installed an update and now Flash Player doesn't work.
I've tried re-installing but it still doesn't work.
Can you help please.Please ask your question on a forum for the Flash Player
-
Sirius Player doesn't work after upgrade
I let Firefox update today to 4.0.1 and now my Sirius XM internet player won't work. It's not my computer. I opened it in IE and it works fine. I prefer using Firefox but need to know how to fix this. The player was working just fine in Firefox before the upgrade. I use it every day.
I just tried Sirius Player on my FF 4.0.1 and it worked fine for me. So it's compatible with FF 4.0.1. Try to delete your cookies and cache to see if that helps:
http://support.mozilla.com/en-US/kb/Deleting%20cookies
http://support.mozilla.com/en-US/kb/How%20to%20clear%20the%20cache -
Why my adobe flash player doesn't work after installing update?
Hello,
I installed the latest update of adobe flash player but i still can't play videos on youtube, facebook, .... It keeps asking me to update to the latest flash player?
Can someone help me out with this?
Thx a lot!Go step by step and test.
1. System Preferences > Other/ Flash Player > Advanced > Delete All
Press the "Delete All" button
Install Adobe Flash Player.
http://get.adobe.com/flashplayer/
Quit Safari.
Restart computer. Relaunch Safari.
2. Enable Plug-ins
Safari > Preferences > Security
Web Content: > "Enable Plug-ins".
or
Internet Plug-ins > "Allow all other plug-ins
3. Check whether you are currently in YouTube HTML 5 trial.
http://www.youtube.com/html5
At the bottom left of the page uncheck the box beside
"You are currently in the HTML5 trial".
4. Reset Safari.
Click Safari in the menu bar.
From the drop down select "Reset Safari".
Uncheck the boxes beside all items.
Check the box beside "Remove all website data".
Click "Reset".
5. Turn off Extensions, if any.
Safari > Preferences > Extensions
Now try YouTube.
Best. -
Flash Player Doesn't Work After All My Efforts
I am trying to play a game when I get a script error. I click yes and am told that the Flash Player version is not correct or the ActiveX is active. I went through all the troubleshooting steps to no avail. Now what do I do?
http://forums.adobe.com/thread/867968
-
Adobe flash player no longer working after upgrade
i am using adobe flash version 11.1.102.55. my issue started with version ".52 download. videos no longer display properly. I followed all the troubleshooting steps. i uninstalled, reinstalled, rebooted etc. i also doube checked scripts are enabled and active X filtering is turned off. i am using windows 7 and ie9. i have been using flash for years with never a single issue until the recent upgrade. i upgraded today to .55 and followed all the same troubleshooting with no luck. any ideas?
cant see the animation.
when a page loads with a video, it shows up as all back. if i click the screen the audio will start. i can hear it but there is no video, just a black box. if i scroll on the page, i see a quick one frame gimpse and then it goes to black.
on the hardware acceleration, i followed the instructions, but when it asks me to right click on the image from the link, my image allows me to select settings but then the screen is black.
device drivers are up to date.
any other ideas?
i appreciate your help. -
After update flash player doesn't work most of the time
Hi Folks!
Windows XP
IE 6
About 2 weeks ago I installed a flash player security update and ever since then flash player doesn't work most of the time. On most websites with embeded video all I see is an empty placeholder where the video is supposed to be.
If I go to a site like Youtube all is fine. However, if I go to a site that has embeded a Youtube video all I see is the empty placeholder where the video is supposed to be.
Some folks have recommended I uninstall and download and reinstall. The problem with this is that there isn't *anything* related to Abobe flash player in Add/Remove programs.
Not sure what to do about this (read: I'm totally lost!).
Here's a screencap of the empty placeholder:
http://i27.tinypic.com/2wrdttf.jpgThe standard warranty is for 12 months from the date of purchase, unless you bough AppleCare which would have extended it to 2 years.
If it's out of warranty, then you pay for repairs, and it's expensive. There are 3rd party repairers who are cheaper.
Did you try these?
The Five Rs.
As the previous poster said, it's more than likely a hardware issue, but there's no harm in trying the software fixes before you decide it needs repair. -
sound doesn't work (only in firefox). adobe flash player doesn't work correctly, thought it's installed. can't solve the problem. i need Sound.
== This happened ==
Every time Firefox opened
== don't knowWhat does the Adobe test page say?
http://www.adobe.com/software/flash/about/
Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
If it does work in Safe-mode then disable all your extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
You can use "Disable all add-ons" on the ''Safe mode'' start window.
You have to close and restart Firefox after each change via "File > Exit" (on Mac: "Firefox > Quit")
See also [[No sound in Firefox]] and [[Video or audio does not play]] -
I have problems with Adobe Flash Player 11 NOT working after several attempts to download, then uninstall, & re-install.
I uninstalled the previous versions of Adobe Flash Player from my computer PRIOR to attempting to install the new 11 version, so now I'm unable to view videos, etc.,
I'm using Windows Vista 32 bit, Internet Explorer 9.0 (which I closed when I got error messages during Adobe Flash Player 11 Installation. I've disabled my AVG -Virus also during the installation of Flash Player 11.
FYI, I'm not computer savvy so the YouTube video by Adobe Tech was too complicated to follow AND I'm unable to view (DUH!) it since I have no Flash Player program installed (doesn't make sense!) .
Thanks for keeping it simple (KISS for me).I've tried uninstalling and reinstalling some 30 times now ..rebooting, you name it.
I haven't been able to use flash since Adobe kindly shoved that latest update down my computer's throat.
Right after getting the 'successful' installation message I restart IE9 ..go to my channel on youtube and immediately get the message:
The Adobe Flash Player is required for video playback.
Get the latest Flash Player
I tried Chrome and on two or three it worked but then even after closing out of them ..Chrome slowed down to a crawl and finally informed me that Flash had stopped working.
This has entirely wasted 3 nights of my time. It is 2:30 am and I should have had at least 2hours sleep already to rise at 6:30 but no, thanks this I'm still up and no doubt millions of other computer users are having just as much fun.. Everyone I know that allowed the updates to install ..is having the same problem ..Chrome/IE9/Firefox ...you can truly call it Adobe's Universal Cluster ...
I live with Adobe. At work we have 6 fully Adobied LR4/CS5 & 6/InDesign workstations. I'm a photographer using nothing but Adobe products and quite frankly I feel this is the worst treatment you have ever given your customers.
Please stop the CYA and just fix the damm thing! I realize you didn't write it Chris but surely you can get Adobe management to address this instead of just trying to get their users to try and debug it for the airheads that released it. Has anyone stopped to consider the financial damage being done due to videos not playing the ads that support the sites and no doubt stream revenue to Adobe? These guys have rolled the online experience back 5 years minimum and Adobe will probably pay the price for it. Re-issue a working version and go back to the drawing board! -
Flash Player doesn't work, either IE or Firefox.
Flash Player doesn't work, on either IE or Firefox. Vista 32 bit, Firefox 10.0.2, Shockwave Flash 11.1.102.62. Reloaded Firefox and Flash. I get the spinning circle, but video never starts on IE or FF. Settings manager works. I'm at a loss. Update - actually it works on most video now, except Fox Sports or ESPN, either IE of FF.
After browsing the forums a bit, it would appear that this has been an ongoing problem for more than a month and the only 'inquiry' on the part of Adobe that I can find is one gentleman consistently asking people to report through the adobe bug/crash report process
http://forums.adobe.com/thread/953796
While I'm certain there have been many, many reports offered up, we have yet to see any solutions from the company, and admissions that there are issues with this product, or any ETA on expecting a reliable, stable version of Flash.
It would be very nice to have some feedback formally from the company. Many users (including myself) are experiencing frequent BSOD, having to spend hours uninstalling, reinstalling and aimlessly troubleshooting our computers all because of this add-in.
I recently updated every single hardware driver from my manufacturer, flashed my BIOS, troubleshot memory through self-diagnostics for days, and i still have issues related to Flash. I've tried the quick fixes suggested by (not sure if he's an Adobe official voice) user 'Chris' to no avail.
Certainly I could offer my dump file, by what good will that do me? Adobe, you certainly have enough crash reports to make SOME progress, please offer us up something, even if it's just to update us on any progress or research? All we know is you want information from us, while we still have nothing from you -
Flash player does not work after I installed it
Flash player does not work after I installed it
I'm using Mac Osx and my browser is Safari
Date: Wed, 5 Feb 2014 00:41:29 -0800
From: [email protected]
To: [email protected]
Subject: Flash player does not work after I installed
Re: Flash player does not work after I installed it
created by Mike M in Installing Flash Player - View the full discussion
This is a user-to-user forum, NOT 24/7 support. You're "lucky" I happen to be up at 1:40 am to answer you.
What OS are you using?
http://mmonlinedesigns.com/images/os.png
What browser?
http://mmonlinedesigns.com/images/browsers.png
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/6087541#6087541
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/6087541#6087541
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/6087541#6087541. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Installing Flash Player at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0. -
Mail server doesn't work after upgrading from SL to ML
My Mail server doesn't work after upgrading from SL to ML
Mail client connects with the Mail Server wich seems to run but then they can't receive any email...
the problem seems to be related with dovecot ... in my smtp log i get this:
relay=dovecot, delay=324, delays=324/0.02/0/0.01, dsn=4.3.0, status=deferred (temporary failure. Command output: pipe: fatal: pipe_command: execvp /usr/libexec/dovecot/deliver: Permission denied
I have to say that in the usr/libexec there wasn't the dovecot directory so I just tried to create one but with no luck
Any Ideas?
Cheers
Carlo
This is my postconf -n info:
server:Data admin$ postconf -n
biff = no
command_directory = /usr/sbin
config_directory = /Library/Server/Mail/Config/postfix
content_filter = smtp-amavis:[127.0.0.1]:10024
daemon_directory = /usr/libexec/postfix
data_directory = /Library/Server/Mail/Data/mta
debug_peer_level = 2
debugger_command = PATH=/bin:/usr/bin:/usr/local/bin:/usr/X11R6/bin xxgdb $daemon_directory/$process_name $process_id & sleep 5
dovecot_destination_recipient_limit = 1
enable_server_options = yes
header_checks = pcre:/etc/postfix/custom_header_checks
html_directory = /usr/share/doc/postfix/html
imap_submit_cred_file = /Library/Server/Mail/Config/postfix/submit.cred
inet_interfaces = all
inet_protocols = ipv4
mail_owner = _postfix
mailbox_size_limit = 0
mailbox_transport =
mailq_path = /usr/bin/mailq
manpage_directory = /usr/share/man
maps_rbl_domains =
message_size_limit = 20971520
mydestination = $myhostname, localhost.$mydomain, localhost
mydomain = moremoremore.it
mydomain_fallback = localhost
myhostname = server.moremoremore.it
mynetworks = 127.0.0.0/8,192.168.178.0/24
newaliases_path = /usr/bin/newaliases
queue_directory = /Library/Server/Mail/Data/spool
readme_directory = /usr/share/doc/postfix
recipient_delimiter = +
relayhost = mail.mclink.it
sample_directory = /usr/share/doc/postfix/examples
sendmail_path = /usr/sbin/sendmail
setgid_group = _postdrop
smtp_sasl_auth_enable = no
smtp_sasl_password_maps =
smtpd_client_restrictions = permit_mynetworks permit_sasl_authenticated reject_rbl_client zen.spamhaus.org permit
smtpd_enforce_tls = no
smtpd_helo_required = yes
smtpd_helo_restrictions = reject_invalid_helo_hostname reject_non_fqdn_helo_hostname
smtpd_pw_server_security_options = cram-md5,gssapi
smtpd_recipient_restrictions = permit_sasl_authenticated permit_mynetworks reject_unauth_destination check_policy_service unix:private/policy permit
smtpd_sasl_auth_enable = yes
smtpd_tls_CAfile = /etc/certificates/server.moremoremore.it.A358901573EE7B9B4D489725407934780D24D5 36.chain.pem
smtpd_tls_cert_file = /etc/certificates/server.moremoremore.it.A358901573EE7B9B4D489725407934780D24D5 36.cert.pem
smtpd_tls_exclude_ciphers = SSLv2, aNULL, ADH, eNULL
smtpd_tls_key_file = /etc/certificates/server.moremoremore.it.A358901573EE7B9B4D489725407934780D24D5 36.key.pem
smtpd_use_pw_server = yes
smtpd_use_tls = yes
tls_random_source = dev:/dev/urandom
unknown_local_recipient_reject_code = 550
virtual_alias_maps =
server:Data admin$if this could help:
mail:setStateVersion = 1
mail:readWriteSettingsVersion = 1
mail:connectionCount = 11
mail:servicePortsRestrictionInfo = _empty_array
mail:protocolsArray:_array_index:0:status = "ON"
mail:protocolsArray:_array_index:0:kind = "INCOMING"
mail:protocolsArray:_array_index:0:protocol = "IMAP"
mail:protocolsArray:_array_index:0:state = "RUNNING"
mail:protocolsArray:_array_index:0:error = ""
mail:protocolsArray:_array_index:1:status = "ON"
mail:protocolsArray:_array_index:1:kind = "INCOMING"
mail:protocolsArray:_array_index:1:protocol = "POP3"
mail:protocolsArray:_array_index:1:state = "RUNNING"
mail:protocolsArray:_array_index:1:error = ""
mail:protocolsArray:_array_index:2:status = "ON"
mail:protocolsArray:_array_index:2:kind = "INCOMING"
mail:protocolsArray:_array_index:2:protocol = "SMTP"
mail:protocolsArray:_array_index:2:state = "RUNNING"
mail:protocolsArray:_array_index:2:error = ""
mail:protocolsArray:_array_index:3:status = "ON"
mail:protocolsArray:_array_index:3:kind = "OUTGOING"
mail:protocolsArray:_array_index:3:protocol = "SMTP"
mail:protocolsArray:_array_index:3:state = "RUNNING"
mail:protocolsArray:_array_index:3:error = ""
mail:protocolsArray:_array_index:4:status = "OFF"
mail:protocolsArray:_array_index:4:kind = "INCOMING"
mail:protocolsArray:_array_index:4:protocol = "Junk_mail_filter"
mail:protocolsArray:_array_index:4:state = "STOPPED"
mail:protocolsArray:_array_index:4:error = ""
mail:protocolsArray:_array_index:5:status = "OFF"
mail:protocolsArray:_array_index:5:kind = "INCOMING"
mail:protocolsArray:_array_index:5:protocol = "Virus_scanner"
mail:protocolsArray:_array_index:5:state = "STOPPED"
mail:protocolsArray:_array_index:5:error = ""
mail:startedTime = "2013-01-21 21:18:32 +0000"
mail:logPaths:IMAP Log = "/Library/Logs/Mail/mailaccess.log"
mail:logPaths:Server Log = "/Library/Logs/Mail/mailaccess.log"
mail:logPaths:POP Log = "/Library/Logs/Mail/mailaccess.log"
mail:logPaths:SMTP Log = "/var/log/mail.log"
mail:logPaths:Migration Log = "/Library/Logs/MailMigration.log"
mail:logPaths:Virus Log = "/Library/Logs/Mail/clamav.log"
mail:logPaths:Amavisd Log = "/Library/Logs/Mail/amavis.log"
mail:logPaths:Virus DB Log = "/Library/Logs/Mail/freshclam.log"
mail:imapStartedTime = "2013-01-21 21:18:34 +0000"
mail:servicePortsAreRestricted = "NO"
mail:state = "RUNNING"
mail:postfixStartedTime = "2013-01-21 21:18:32 +0000" -
The latest version of Adobe Flash Player doesn't work on my Mac
The latest version of Adobe Flash Player doesn't work on my Mac?
What is the solution?Download and install a version compatible to whatever cat flavor you have on the computer.
http://get.adobe.com/flashplayer/
Maybe Flash 11 is too big and you need to stay on Flash 10.3 -
The flash player doesn't work on my IE9
I have a windows 7 - 64 bit operating system. The flash player doesn’t work on my IE9 and it does work on Google Chrome. I have tried uninstalling the flash player and re installing the player. The download file doesn’t download when I try downloading through IE9and the file fails to initialize when I download the flash player for IE9 through google chrome. My antivirus software McAfee is not working because of the flash player and other softwares like yahoo messenger . Please help.
Assuming you've checked to make sure that Shockwave Flash is enabled in IE's addons manager and you do not have ActiveX filtering enabled, Could you check to see if you have the following Windows update installed?
KB2670838 – Platform Update for Windows 7 x64
If so, please uninstall it and try Flash Player out again.
Thanks,
Chris
Maybe you are looking for
-
How to use standard report program [RPR_ABAP_SOURCE_SCAN]
hi all, how to use RPR_ABAP_SOURCE_SCAN report program for checking my program. when i run it its asking me the report name and i gav it but, its showing me the error message as 'ENTER SEARCH STRING' . SO I NEED TO KNOW WHERE I DID WRONG. thanks in
-
Index failed for Docs and PDF files with return code 8002
Hi All, I try to index Word documents in a webdav folder in KM. When I add a text document the Indexing completes correctly and I can find the document via the search. When I add a Word Document or PDF to the folder and reindex I get the message Inde
-
Address Field grayed out, not showing up
How very odd. This morning, the *address field* in each of my 2,000 Apple Address Book contacts have disappeared. I verified that the Address Field (Preferences: Template: Address) was checked, and it's grayed out. Which means those fields should be
-
How to upgrade to mac OS X v10.6 from mac OS X v10.5?
i'm trying to upgrade to itunes 10.7 but won't let me unless i upgrade to OS v10.6. i tried downloading 10.6 then when trying to install it says that it requires 10.6 to be installed? is there a link that directs me to get this upgrade installed pro
-
Hi Everyone, I am new to Planning and have a doubt regarding the secuirty on account members. Do I need to assign security for all members under account dimension?? How does this work??? How can I check whether a particular member is being used in ca