Flash Player has sound but video is a green screen.
I am running Windows 7 x64 and did a new install on a new HD. No problem with my old HD installation. I have an ATI XFX 6700 series video card, 8 GB computer RAM. I have tried manual un-install per the youtube video. I have deleted two Windows update files KB2735855 and KB2750841. I installed the latest version of Flash Player 11.6.602 after reboot and the problem is in my primary browser Maxthon 3 and in IE9. Both of these browsers work just fine for video, on my old HD.
I have re-installed the Maxthon browser as well. Always a green screen in Flash video but the HTML video works ok. The Adobe detector shows :
This is after the sucessful update to 11.6.602.171 I also don't understand why it shows Chrome browser which I didn't have untill the Flash update snuck it in on the last download. This showed Chrome even before that and I don't beleive Maxthon is a Chrome browser. I have run out of options except to try a Window restore. What can I do to get this fixed? Very frustrated.
Other video card info:
Pat, the video does work in Chrome. But the Flash detector (1st picture) showed I was using Chrome before it was ever installed. I think Adobe should at least recognize Maxthon browser and suggest the correct version of Flash.
I have the latest video driver and it was installed during my Windows install on the HD. Perhaps it is a newer version than the one on my old drive, I will have to check. I still have the green screen and I want to get video working in Maxthon which is a far better browser than anything esle I have tried.
The Flash player in Chrome shows it is Adobe Flash 11.6.602.171, while the right clicking in the video player on Maxthon shows it is 11.5.502.110 so obviously Flash is not updating after I downloaded and ran the updater. How can I get rid of this old version, I have tried the manual uninstall? There must be some registry entries that are not being deleted.
Picture of green screen: Most videos on Adobe TV do this but here is URL: http://tv.adobe.com/watch/featured-videos-on-peek/pixeltone/
Similar Messages
-
Satellite L750D - Window Media Player has sound but no pictures
I have a Toshiba Laptop Satellite L750D, Win 7 Home Permium. I don't know why Win Media player just has sound but no pictures. Please some one help fix this problem. I don't have a recovery dics. Where can I down load it? I would very much appeciate your help. Hien
Your issue is likely, but not necessarily a corrupted or missing codec since you haven't actually confirmed whether your problem is with just one disc or all discs nor if they ever worked on this system before.
Installing VLC is a good idea, but it's a considerate application and won't tamper or try to repair a busted codec and will more often avoids tampering or accidentally repairing any detected whether it's already working or likely broken like yours. That's one of the reasons VLc is so highly recommended such as they way it was repeatedly suggested to you.
A question to ask if your problem is being caused by a few discs, are they custom burned or commercially pressed boutique films since most mainstream DVD's use the same MPEG-2 codec for video and audio and failed video but working audio is usually a clue about a split format disc that has simpler audio streams but obscure video formats that can result in an issue just like yours.
In either case and if none of that is of interest, I can relate and suggest you keep any installed VLc's and download KLite because it is nothing but varying degrees of CODEC's including obscure ones and is fairly aggressive in detecting and seamlessly repairing corrupted codecs while offering more configuration options than most people want and more than many commercial video applications offer.
Visit http://codecguide.com/download_kl.htm and choose the "Mega" or 64Bit package but 64bit systems can successfully backport the 32bit set if you feel its necessary to.
You can also potentially skip the KLite process by diagnosing your codecs with Nirsofts InstalledCodec tool, a single file executable no install / no reboot but I don't get the impression you're prepared to really do much at that level and that's fine but it might be needless effort in your case.
http://www.nirsoft.net/utils/installed_codec.html
But something you definitely need to stop and wonder about is what happened to crush your codec since they don't normally suffer damage until some insidious piece of badware like your favorite iLivid and mine gets into your computer to raise holy hell forever. If that could possibly be what happened to you, the circumstances of how you managed to pick it up and anything else are things you can keep to yourself but consider it a spyware affliction and one I don't make lightly and is something I rarely suggest since it is the overused excuse at the Microsoft forums to blame everything on spyware instead of poorly written OS code. -
Web Flash Player suddenly stopped working, now just see green screen or player crashes altogether
Hi,
I bought a new laptop maybe 2 weeks ago. It worked fine up until 2,3 days ago. Videos online (ie. youtube) no longer work. I either get a green screen (other videos online, random sites) or the video player crashes and asks me to send the error report (happens whenever i click a youtube video).
I'm running windows 8 (64-bit) and the latest flash player is installed (the .117 one)
Someone please help,
I can't watch any videos and my laptop is brand new!
Thank you in advance."green" indicates an outdated graphics driver; see http://forums.adobe.com/thread/945765
Or you could disable hardware acceleration. -
Since 10.7 DVD Player has sound but no video
MBP with 10.7 is not showing video I get a black screen, although there is sound. DVD in question worked prior to upgrade.
I tried playing it in VLC while doing that I first closed DVD pLayer, then when I was waiting for VLC DVD PLayer opened up full screen and started playing, so I guess it resolved itself.
-
I have tried using volume on other video types, such as YouTube, and it works fine, but Flash volume on ads and other sites does not work. What is the Adobe-recommended solution to the problem? Thank you.
Hi, We could not reproduce the issue. Which Flash version are you using?
-
I bough a used Macbook Pro mid 2009 that came with OS 10.8.9 it didn't have a backup restore disk with S/N W8******66D
When trying to view some youtube videos; a window would pop up saying "it needs adobe flash player is required for video play back get the latest flash player" but after downloading the file and during installation would have errors and will not installed.....tried to reboot and install again.....but still the same.
The othe thing I had noticed is when using a good Bose headset with mic the sound output would noticed the headset and then switch from headset to Internal speekers and headset.....thinking that there might be something wrong with the plug in port of the computer or the headset.....the headset works with no issues on my iPad so there must be something wrong with the computer.....tried to move the plugin around the port but no change....while the headset is plug in can hear a short clicking noise and the sound would get lost and back again......but with nothing plugin to the port there is no issue with the sound or mic.
Thanks for your feed back......it looks like I have two different issues one is a software issue and the outher is a hardware issue
<Edited By Host>The "restore disk" is built into the Mac. See About Recovery.
Need more specifics about what error messages you got while installing Adobe Flash.
However, you can almost avoid Flash altogether by setting YouTube to play the HTML5 version instead.
Click the Try something new! link at the bottom of the YouTube page.
I don't know about the sound issue. Might be hardware as you think. Try other headphones to check. -
Flash player has ''noise'' in its sound when it plays a video
When Firefox starts and I go to youtube or any other website that needs flash player, the sound of the video is ok.
But after a while and after I have seen some videos for some time (pausing, repeating etc.) then when the flash player plays a video you can hear a ''noise'' I could say a white noise messing with the sound of the video.
If I restart Firefox then there is no noise again for some time.Try to disable hardware acceleration in Firefox.
*Tools > Options > Advanced > General > Browsing: "Use hardware acceleration when available"
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
You can check for problems with current Flash plugin versions and try these:
*disable a possible RealPlayer Browser Record Plugin extension for Firefox and update the RealPlayer if installed
*disable protected mode in the Flash plugin (Flash 11.3+ on Windows Vista and later)
*disable hardware acceleration in the Flash plugin
*http://kb.mozillazine.org/Flash#Troubleshooting -
flash player has been installed multiple time without errors but bbc news website and even flash player help say it isn't. How do i get out of this loop? - using windows 7 ultimate and latest IE11
I have had the same problem for WEEKS and I cannot access any sites that use Flash. Flash has been installed on this computer since I bought it in 2012. I have allowed auto updates but for weeks the updates never get past Step 2 - is this because I do NOT want the Google Tool bar? I use NO tool bars as there is only 6 inches of vertical screen space. Is this because I uncheck wanting Chrome as a default browser? It is already installed, I just don't use it. I came to this site and ran the check is it installed and the system says it is either not installed or not enabled. Version 14 just downloaded about 30 minutes ago - but did not progress to Step 3 although a pop up screen came up with a finish button, which I clicked. WHAT is the problem and how do I fix it? If this were just a compatibility bug between IE11 and Adobe they have had plenty of time to fix it.
Stephanie HC -
Videos won't play in Safari. Notice says, "You need to upgrade your Adobe Flash Player to watch this video." I have downloaded it, but no change. All videos play OK in Firefox, but I like the controls in Safari better and want to stay with it.
Try deleting Flash cookies.
Flush.app – Flash Cookie Removal Tool For OS X | MacHacks.TV
If that doesn't help, UNinstall the old Flash plugin first, then reinstall new.
Troubleshoot Flash Player | Mac OS
Then restart your Mac. -
After exporting to quicktime file, the file has sound but no video, what am I doing wrong?
after exporting to quicktime file, the file has sound but no video, what am I doing wrong? The self contained movie box is not checked.
Hi
Did You go via Compressor ?
Did You use QuickTime Conversion ?
I don't
I do
• In TimeLine set In and Out-Points to the full Movie/Project
• Select ALL - Clips and Audio
• Go up to Sequence and down to Render Only - down to Mix Down Audio
• then Sequense and Render Selected - Both (Video and Audio)
• then Export and as QuickTime .mov (NOTHING ELSE)
• I use to do - Not Self-Contained as it saves both time and space
Your Start-Up (Mac OS) Hard Disk - Needs lot's of free space to work OK - I never go under 25Gb free space on this one,
Good Luck - Yours Bengt W -
fire fox will come up and the flash player has crashed box will pop up in the middle of the page. how do i fix the flash player. i tried loading the new version of flash player it did not fix it.
Hello,
Some problems with Flash video playback can be resolved by disabling hardware acceleration in your Flash Player settings. (See [[Flash Plugin - Keep it up to date and troubleshoot problems|this article]] for more information on using the Flash plugin in Firefox).
To disable hardware acceleration in Flash Player:
#Go to this [http://helpx.adobe.com/flash-player/kb/video-playback-issues.html#main_Solve_video_playback_issues Adobe Flash Player Help page].
#Right-click on the Flash Player logo on that page.
#Click on '''Settings''' in the context menu. The Adobe Flash Player Settings screen will open.
# Click on the icon at the bottom-left of the Adobe Flash Player Settings window to open the Display panel. <br/> <br/>[[Image:fpSettings1.PNG]] <br/>
# Remove the check mark from '''Enable hardware acceleration'''.
# Click '''Close''' to close the Adobe Flash Player Settings Window.
# Restart Firefox.
This [http://www.macromedia.com/support/documentation/en/flashplayer/help/help01.html Flash Player Help - Display Settings page] has more information on Flash Player hardware acceleration, if you're interested.
Does this solve the problem? Let us know. -
I keep getting "Adobe Flash Player has stopped potentially unsafe" but can't click Settings
Every time I open a blank tab in IE8, I get a message:
Adobe Flash Player has stopped a potentially unsafe operation. The following local application on your computer or network about:blank is trying to communicate with this Internet-enabled location: s.nsdsvc.com. To let this application communicate with the Internet, click Settings. You must restart the application after changing your settings.
I have tried clicking the Settings button, but that just closes the message box. I have added both about:blank and s.nsdsvc.com to my trusted sites. I tried creating an html file with nothing in it and setting that as my home, but I am still getting the stupid message.
This is driving me to distraction. How can I fix it?
p.s. If this is already posted and answered, I apologize. I searched for it but it appears that the forum search is still broken.There is no swf in a blank page, so I don't know how to do what you suggested.
However, I tried something else that seems to have worked. I took EVERYTHING out of my list of trusted sites. I know it doesn't make sense, but I'm not getting those messages now.
Thanks, -
Not sure what I did but projects are not showing up in the video window as i skim... Event footage does but project footage has sound but the video screen is gray... How do I get the vido to show in the viewer?
So you can ping and nslookup from your ms to these agents and vice versa right? I wouldn't do a manual install, I would push the agent from the management server. You can uninstall the agent manually, or use cleanmom to get rid of them. Then
do an install from the console. When you initiate the install from the console (management server), should it run into any issues it will dump out an error which will give you an idea of where the problem may be.
From Holmans post on this:
e MOM Server could not execute WMI Query "Select * from Win32_OperatingSystem" on
computer “servername.domain.com”
Operation: Agent Install
Install account: DOMAIN\account
Error Code: 800706BA
Error Description: The RPC server is unavailable.
The MOM Server could not execute WMI Query "(null)” on
computer “servername.domain.com”
Operation: Agent Install
Install account: DOMAIN\account
Error Code: 800706BA
Error Description: The RPC server is unavailable.
8004100A
800706BA
1. Ensure agent push account has local admin rights
2. Firewall is blocking NetBIOS access. If Windows 2008 firewall is enabled, ensure “Remote Administration (RPC)” rule is enabled/allowed. We need port 135 (RPC) and the DCOM port range opened for console push through a firewall.
3. Inspect WMI service, health, and rebuild repository if necessary
4. Firewall is blocking ICMP (Live OneCare)
5. DNS incorrect
http://blogs.technet.com/b/kevinholman/archive/2009/01/27/console-based-agent-deployment-troubleshooting-table.aspx
Regards, Blake Email: mengotto<at>hotmail.com Blog: http://discussitnow.wordpress.com/ If my response was helpful, please mark it as so, if it answered your question, then please also mark it accordingly. Thank you. -
Ipod Video 80gb with click wheel has sound, but no audio
My ipod video 80gb with click wheel has sound, but no audio. I can hear the clicking of the wheel and selections made through the headphones, but I cannot get music, video, etc. to play audio. I did the 5 R's and installed a new headphone jack prior to posting here. I am all out of ideas and any help would be greatly appreciated.
Can you connect it to an iPod Dock Stereo to check if there is music, coming out, if not the Hard Reset would solve your problem or else the Audio chip has called it a day.
I know you mentioned doing the 5Rs, but did you see the Apple Logo and the language prompt? Sorry, most of the users here, doesn't do the Hard Reset correctly.
Try the iPod Hard Reset -> Press Menu and Center button simultaneously for about 10 secs till the Apple logo comes ON, then release the button
Select your preferred language.
This wont delete or erase any song/data on your iPod Classic.
See this Apple Support Article on 5Rs
http://www.apple.com/support/ipod/five_rs/classic/
Good Luck! -
How to Improve Adobe Flash Player to watch this video
When I wanted to watch Man City vs Chelsea live stream via http://footballity.blogspot.com/2013/08/man-city-live-stream-free.html , there is a message "You need to improve your Adobe Flash Player to watch this video" so anybody can help me..
Well going by your standards then the blackberry playbook is just as useless since there is no native contacts app or email app. If you want that you will also have to have a blackberry phone that is capable of tethering using the blackberry bridge app (if allowed by AT&T and Verizon since that would be another fee technically you might be charged for since you will be tethering your phone to you tablet).
Funny how I and many others are able to get by using the iPad and we don't have flash. The majority of people if the want to view flash will try Skyfire, iSwifter, Cloudbrowse, or will look to see if there is an app already dedicated to that thing you want to watch, like ABC Player or CNN.
Hey if doesn't work for you then it doesn't work for you. I am not trying to come off as an Apple fanboy, just trying to make sure you are informed about your product and what options are out there.
Would it be nice if flash was allowed native......sure. But it isn't so you can either get rid of the product, get an app that supports it (we are talking about spending $2 - $4) or go buy something else and hope your happy with it as well. You can't please everyone. Apple has chosen their stance and as you can see by sales numbers they aren't hurting. Infact i just read about a week or so ago on Gizmodo.com that alot of the other tablet making companies are cutting back on the number of units they will be making due to low sales or projected low sales (you can thank the iPad sales for that). Your one purchase isn't going to impact them that much. Instead, someone else will be standing in line behind you ready and happy to get their apple product.
Maybe you are looking for
-
Can't get MacBook Pro to recognize Motorola H500 Bluetooth headset
Hello all, I am trying to get my MacBook Pro to recognize a Motorola H500 Bluetooth headset. Bluetooth is ON and "discoverable" on my mac. When I go to system preferences and click "bluetooth", then "devices", the headset won't show up (it is turned
-
HI, After updating my iPhone 4S to iOS 8.0.2 I can't connect to any Wi-Fi connections and it just keeps on searching for Wi-Fi networks. Can someone please help me with how to resolve this problem?
-
Reporting a problem from my bill just gets me sent around in circles. This has happened before last month, and seems to be linked with the upgrade to iOS 6.0.1. as problems started immediately after the upgrade. My subscription just seems to lock its
-
Application Loader Error ITMS-90125
When i try to send my multi-folio app to store using application loader, i get "ERROR ITMS-90125 "The binary is invalid. The encryption info in the LC_ENCRYPTION_INFO load command is either missing or invalid, or the binary is already encrypted. This
-
Hey. I want to create a report using Stimul Report 2013. But show me the error. Please help me ... How do I fix this error? My Database : SQL Express 2012 Error :