Flash Player is small

I have a Lenovo Yoga 2 Pro and am running Windows 8.1. My Flash Player is appearing normal size in Internet Explorer, but in Firefox and pop up windows it is extremely small.

Similar Messages

Flash player for small linux device

Hi forum,
I'm working with small linux devices and I'm having a very
decent restriction on the Compactflash / harddisk size. Is there a
small stand-alone flash player for linux which plays at least
Flash4? The player should have less than 1.5 MB in size. Therefore
flash player 9 from adobe is not an option.
I've tried the stand alone player version 6 from adobe, but
this player is too much buggy on the linux basis we use.
Any hints or suggestions would be appreciated.
Kind regards.

Hi, I'm not familiar with Linux, but this link has the system requirements for Flash Player 9.
http://www.adobe.com/products/flashplayer/productinfo/systemreqs/flashplayer9/
Flash Player is a browser plug in and works thru your browser, so check and see what browser and version is needed for FP version 9.
It appears that Flash Player 8 is not supported for Linux, at least it wasn't listed.
eidnolb

Flash Player 11 and You Tube screen size problems

When on "You Tube" flash player gives the choice of the use of thre sizes of screens to view the vedios. With the older version of Flash player I was able to use all three od the different size to view. Now That I have Version 11 Flash player the small screen view is good, but If I take it to the medium size the screen stays the same size as the small screen but moves to the center of the screen. The full screen selection gos to black and the sound goes in and out at a fast pace. Is there any way that I can fix this problem? I have tried to reload version 11 of Flash Player,but the problem stays the same.

Hi,
Could you please try to disable hardware acceleration? http://helpx.adobe.com/flash-player/kb/flash-player-games-video-or.html#main_7__Disable_Fl ash_Player_hardware_acceleration
Thanks,
Sunil

Too small window size in standalone flash player in FLEX

Hello,
I have unchecked the option "generate html wrapper file" so I
don't have to bother about closing the browser tab each time I make
a small change to the code and rerun the application.
This works fine as the standalone flash player closes when I
terminate the application from Flex. However, the standalone flash
player always starts in a fixed window size smaller than my
application size so that I cannot see the whole application. So I
have to enlarge the window size of the standalone flash player each
time which is annoying!
Is there a better solution?
Maybe get Flex to close the browser tab after I terminate the
application. I still prefer to use the standalone flash player
during development as my application doesn't depend on the browser
though.

Adobe Newsbot hopes that the following resources helps you.
NewsBot is experimental and any feedback (reply to this post) on
its utility will be appreciated:
Flex 3 - About the Flex development tools:
Adobe Flex Software Development Kit (SDK) primarily provide
XML files that you use ... When you use the debugger version of
Flash Player or start your AIR
Link:
http://livedocs.adobe.com/flex/3/html/building_overview_2.html
Adobe - Flex 3:
While Flex applications can be built using only the free Flex
SDK, developers can use ... Alert This content requires Flash.
Download Flash Player now
Link:
http://www.adobe.com/products/flex/
Flex.org - Rich Internet Application Development:
I would like to extract data from my Flex application to a
CSV file for loading into Excel. However, the current Flash player
does not allow direct access
Link:
http://flex.org/
Adobe - Flex Developer Center:
Supports visual and code-centric development, code hinting,
visual debugging, and so forth. Includes the Flex 3 SDK and Flash
Player 9.
Link:
http://www.adobe.com/devnet/flex/
moockblog: Flash Player 9, Flex 2, ActionScript 3.0: A Survey
of:
Flash Player 9's main new feature is full support for
ActionScript 3.0 (but older ... Flex Builder 2 also includes a
development framework known as the Flex
Link:
http://www.moock.org/blog/archives/000189.html
Disclaimer: This response is generated automatically by the
Adobe NewsBot based on Adobe
Community
Engine.

Flash player encounter problems that long video are cut to a lot of 6:00 seconds small videos

A lot of times, when I use my 2013 13'' macbook pro retina notebook's Safari to view flash video, the long video are cut to a lot of about 6:00 seconds small videos, and when one pieces of them played over, the next piece is not start. So I need to manully change to the next small video. That's very stupid!
Now my resolution is to reinstall flash player, or restart my notebook, or ..... I don't know the exactly resolution, but when I do that, maybe the problem is solved. Long video does not cut to a lot of small videos.
But the problem is always occur maybe later everyday!
I want to know why long video are cut to a lot of small videos. How to solve that problems!

Try un-installing Flash and then re-installing.
Adobe Flash Uninstaller
Adobe Flash Player

Small pops up boxes asking permission to install flash player!!??

I play on a farm game, where everyday as a task we have to visit the friends farms to do some actions; for the last 7 or 8 months, everytime I go into one of those farms, a small box pops up asking permission to install flashplayer, since I already got the Flash Player installed, I just click the deny permission option just for safe.... and I am really sick of keep getting it again and again, it doesn´t even have the logo or the corporative image of adobe products when that pops up little box comes up.. Is That a new way for hackers to try to get into our pc´s?? Are hackers trying to use the Flash Player name so we users let some crap get into our pc´s, thinking than it´s safe cause it has a known name?

To explain better about that pops up box, this is what it says :
"Adobe Flash Player Settings
Local Storage
nameofthegamesite is
requesting permission to
store information on your
computer.
Requested: up to unlimited
Currently Used: 1 kb
Allow Deny "
I need to know if this message its genuine from adobe or what does it means, if i should allow?? please a light on this, thanks

Flash player freeznig when loading in small XML files

Hi all,
I could really use some help in finding a reasonable solution
to this problem. I'm getting a problem where the flash player
freezes giving the "A script is causing the flash player to run
slowly" dialog box, when it's trying to load in XML files for
content. Therre are 15 files and they are all between 1-3kb. I
wrote a loop so that the next file doesn't begin loadnig until the
previous file has finished. But on some machines I still randomly
get this problem.
I've tried using the download simulator in flash and it seems
that this error always occurs on lower connection speeds, but we
are on a fast connection here and I still randomly get it freezing
I traced which files it freezes on and it's different ones every
time.
Any help would be greatly appriciated.
Thanks.
Here is the code for my xml functions:
// LOAD XML CONTENT FILE
function loadXMLFile(fileName, callBackFunction){
var_xml = new XML();
var_xml.load(fileName);
var_xml.ignoreWhite = true;
var_xml.onLoad = callBackFunction;
// FUNCTION: getNodes()
function getNodes(success) {
if (success == true) {
loadParentNode(this);
else {
trace("ERROR: XML not loaded");
// CREATE VARIABLES FROM NODES
function loadParentNode(myXMLobj) {
var obj_xml = myXMLobj;
//Determine number of parent nodes
var noOfParentNodes = obj_xml.firstChild.childNodes.length;
var content_xml = findXMLNode(obj_xml, "content");
if (noOfParentNodes > 0) {
for (x=0; x < noOfParentNodes; x++){
var currentNode = content_xml.childNodes[x].nodeName;
var currentValue = findXMLValue(content_xml, currentNode);
this[content_xml.childNodes[x].nodeName] = currentValue;
gotoAndPlay("xmlOK");
else {
trace ("1 ERROR: No Parent Nodes Found");
// GET VALUE OF CHILD NODE
function getChildNode(sectionName, desiredNodeName) {
var obj_xml = this.var_xml; // create a pointer to the XML
object
var noOfParentNodes = obj_xml.firstChild.childNodes.length;
if (noOfParentNodes > 0) {
for (x=0; x < noOfParentNodes; x++){
//Find parent Node (sectionName)
if (obj_xml.firstChild.childNodes[x].nodeName ==
sectionName) {
var nodeFound = 1;
var XMLvars = obj_xml.firstChild.childNodes[x];
var noOfChildNodes = XMLvars.childNodes.length;
if (noOfChildNodes > 0) {
for (var i = 0; i < noOfChildNodes; i++) {
if (XMLvars.childNodes
.nodeName == desiredNodeName) {
return XMLvars.childNodes.firstChild.nodeValue;
} else {
trace ("ERROR: No Parent Nodes Found");
if (nodeFound <> 1) {
trace ("ERROR: Parent Node \"" + XMLnodeName + "\" Not
Found.");
//===FIND XML
NODE=======================================================
_global.findXMLNode = function(node_xml, XMLnodeName) {
while (node_xml.nodeType == 1) {
if (node_xml.nodeName == XMLnodeName) {
return node_xml;
} else if (node_xml.firstChild.nodeType == 1){
checkChildNodes = findXMLNode(node_xml.firstChild,
XMLnodeName);
if (checkChildNodes != undefined) return checkChildNodes;
node_xml = node_xml.nextSibling;
//===FIND XML
VALUE=======================================================
_global.findXMLValue = function(node_xml, XMLnodeName){
while (node_xml.nodeType == 1) {
if (node_xml.nodeName == XMLnodeName) {
return node_xml.firstChild.nodeValue;
} else if (node_xml.firstChild.nodeType == 1){
return findXMLValue(node_xml.firstChild, XMLnodeName);
node_xml = node_xml.nextSibling;
}

Hi Rex,
That plugin version installed is actually the HW accelerated beta version Gala: 10.1.81.25 (The current version is 10.1.81.75). I would recommend installing the official release, since the Gala version does have some compatibility issues. You can download the latest version here: http://get.adobe.com/flashplayer/
-Charbs

My mouse wheel only brings the page closer up in Flash Player, doesn't make it smaller when using Firefox Browser. I uninstalled and reinstalled Flash Player. What do I need to do ? It works fine with IE 8.

My internet is Internet Satelite 1.5 MB. speed. Everything else with the Flash Player seems to work fine except the wheel. But the mouse wheel works fine everywhere else.

So what Flash Player version do you have currently installed?
BadsantaKQ wrote:
some flash websites load and work properly, whereas other ones don't.
What exactly do you see on sites that don't work?

Problems with Adobe Reader and Flash Player

I had an Adobe update last Monday and, ever since then, I can't view documents (eg credit card statements) on screen and sites that I previously visited regularly without problem suddenly say that I need to have Adobe Flash Player installed. I've downloaded Adobe Flash Player and it says it's installed correctly but when I return to the site, it still says I need Adobe Flash Player. I've also tried doing an uninstall first and then an instal but the same thing happens. I've run disk first aid and it found a problem with the Head which it fixed but I still can't open documents using Adobe in Safari. Adobe Plug ins tells me that the Internet Access plug in is not loaded but when I ran 'repair Adobe Reader installation", it said there were no missing components detected and repair was not needed. I don't know if it's relevant but I've been having problems with Safari for several weeks, quitting 3 or 4 times a day, mainly when I'm switching from Safari to another programme such as Entourage or Excel.
Message was edited by: Aileen2

Hi Carolyn
I don't think I made it clear on the original post that I'm having problems with both Adobe Reader AND Adobe Flash Player. Unfortunately, all the Adobe Reader sites are confidential so I can't give you an illustration on that but for the Adobe Flash Player, try www.jacquielawson.com/ - you can preview cards without being signed in. With the Adobe Reader problems, I get a picture of a blank 'piece of paper' with a small blue square in the top right hand corner that has a white question mark inside it. The first time this happened to me, I was on the UK Inland Revenue site trying to print out some end of year forms. I phoned the Revenue's helpline and they said to try doing a 'save as' to my desktop. It seemed bizarre - saving a blank piece of paper - but lo and behold, when I opened it on my desktop, the forms appeared exactly as normal. However, I've since tried this 'save as' technique with my credit card statement and I still get a blank piece of paper with a blue square and white question mark when I open the desktop copy.
Thanks for your help and patience. I really appreciate it.
Aileen

How to zoom in with Adobe Flash Player 12.0.0.77

I like to play a game on Neopets called Destruct-O-Match. Until two days ago, I could zoom in on the game (make it bigger) by right clicking with my mouse. Now that option no longer exists, so the game is too small to see comfortably. How do I zoom in and make the game big enough to enjoy using Adobe Flash Player 12.0.0.77?

Thanks Mike, but I already did that. Until two days ago, I would maximize
the screen using Control +, but the game would still be small, so then I
would zoom in with a right click of the mouse. However, apparently there is
a new version of Flash Player, 12.0.0.77, and there¹s no option of zooming
in by right clicking.
I figured out how to make the game bigger by reducing the resolution of my
computer, but I can¹t play long because it makes me dizzy.

FLASH PLAYER 10.3.183.7 DOES NOT WORK IN FULLSCREEN

FAO: Mr CHRIS CAMPBELL
Hello Chris
You're probably getting this from all angles but the newest update to Flash Player (10.3.183.7)   JUST DOES NOT WORK PROPERLY.
I keep my browsers up to date and as of today (5 Sept 2011) Flash WORKS in "small pane in browser" mode (for example, in Youtube) BUT GOES BLANK AS SOON AS FULLSCREENED.
Note that overlay captions and the pause / play graphics DO all work - it is only the video decompression that doesn't - leave screen blank and black.
This is BOTH in FireFox 7.0 and in latest Google Chrome: I have carefully uninstalled & replaced Flash form the links you posted here and IT STILL DOES NOT WORK in fullscreen.
You really should NOT release new version of auto-updating code like this that are not properly tested: this has mucked up video viewing for millions of people needlessly.
Is it because of the new accelerator support ?   who knows.    This is a mid-life Toshiba Satellite Pro   (we don't all go out and buy new PCs every ten weeks like you developers do) and it has a P4 and standard onboard Intel 82852 graphics: perfectly fine up to last week.     But it has 64MB of graphics space and I see that 10.3.183.7 now "requires"   128MB ?       You just cannot make assumptions like that : I bet there are 50 million plus PCs out there with 64MB (or less) VGA RAM.
Adobe is a lovely product, but this is a complete and utter bal*ls-up as we in the UK call it:      please excuse my anglo-saxon directness.    Sort it out, please.
Mike, London, exasperated

Hi Chris
Thanks for your rapid feedback.
YES - you are right - turning off hardware accelerate FIXES it on this machine.
(For anyone else trying this, note that if your PC is busy you may not be able to get the Right-click menu to work while the video is displaying, so PAUSE it first, then right click in the pane,   choose "Settings", and UNtick the hardware acceleration tickbox. Then unpause, and bob's your uncle.)
Interesting: Chris - I also notice that   Not All Videos Do it     - some are fine (adverts seem to be, on youtube) - but this (below) is an example of the one which will not fullscreen with the HW acceleration on (nice watching, too :-)
http://www.youtube.com/watch?v=lb3VWZj_I6g&list=PL0F01AFE18471E7B8&index=1
NB Might it have anything to do with the transcoding YouTube are supposedly doing, over to VP8 ?     I wonder if they change the content of the stream, when you choose fullscreen perhaps ?   And so perhaps confusing the HW accelerator which may not know VP8 ?
Thanks again for rapid response.   GOOD LUCK ALL
Mike H
London

10/8/2013 - Flash Player 11.9 Release Announcement

Today we're pleased to announce that the next version of Flash Player is available for immediate download. This update includes the following new features and improvements:
New Features:
Safe Mode in Safari 6.1 and higher
Safari 6.1 includes an updated version of Safari with Safe Mode, which implements new security restrictions on the operation of browser plug-ins. To the extent possible, we've adapted Flash Player to transparently handle these changes. A small number of behaviors will change in the context of Safe Mode and are explained in the Known Issues section below.
Mac .pkg Installation Support
Deploying Flash Player and keeping it up to date in enterprise environments is a critical task for system administrators worldwide. We’re introducing a new .pkg installer format for our distribution partners to reduce their workload. Administrators can now deploy Flash Player for Mac using industry-standard management tools.
Notable Fixes and Enhancements:
[3633176] [Win7] - Corrects a problem introduced in 11.7.700.224 where Simple Chinese characters were displayed as a box or question mark on the AutoUpdate dialog
[MSFT 3612555][Win 8] - High DPI Displays - Corrects an issue where some content was not scaling with zoom changes
[MSFT 366785] [Win 8.1/IE11] - Corrects an issue where an initial button press was ignored
[3634589] - Corrects an issue introduced in 11.8.800.94 where layout of the AutoUpdate notification dialog was incorrect in localized languages
[3634362] - Corrects a problem introduced in 11.9.900.4 that only affected the beta, where HTTP Live Streams would not buffer after an Ad insertion
[3632291] [HLS - Trickplay] - Corrects an issue where memory usage doubled with Trickplay mode enabled
[3626978] [Windows] - Corrects an issue introduced in 11.7.700.164 where video was not rendering on some systems when using StageVideo with WMODE set to Window
[Mozilla 902630] g1.globo.com hangs Flash Player
[3584089] [HTTP Live Streaming] - HLS Streams created with Apple Media Segmenter now work as expected
[3630266] - Resolves an issue introduced in Flash Player 11.8.800.168 where the ExternalInterface.call() method called with multi-byte text as a parameter, corrupts the multi-byte characters on the JavaScript side
[3622168] - Resolved an issue introduced in Flash Player Beta 11.9.900.77 where exiting FullScreen mode during video playback on www.ted.com would cause a crash on Windows
[3630373] [Win8] [Internet Explorer] - Resolved an issue where when zoomed in the browser >=150% , video controls on Youtube where rendered too large after exiting from FullScreen mode
[3580628] [MSFT 84699][Win8] - The EPM notification bar now appears for embedded PDFs with Adobe Reader installed
[MSFT 138222][Win8] - Metro/IE10 - Resolves an issue on High-DPI displays where controls are rendered too small on Youtube in FullScreen mode
[3581370] [Win8 ARM] - Resolves an issue where 4096x4096 textures could not be rendered when the backbuffer is large
[Chrome] - Copy To Screen performance in PPAPI has been significantly improved
[Chrome] - Resolves an issue where video noise was encountered when moving between fullscreen and embedded mode during video playback www.vudu.com
[HTTP Live Streaming] - Resolves an issue where AES encrypted video was skipping back and forth during playback.
[3613440] [HTTP Live Streaming] [WebVTT] - An issue where captions would be delayed after returning from an ad have been resolved
[3615084] [HTTP Live Streaming] [WebVTT] - Corrects an issue where the caption would wrap around the video display when the specific font was too large
[3585544] [HTTP Live Streaming] [WebVTT] - Corrects an issue where large, non-default fonts would sometimes overlap
[3616952] [Mac] [StageText] - Corrects an issue where when zooming multiple times on a Mac equipped with Retina display, text would not scale correctly when maximizing the window.
[3612492] [StageVideo] - Corrects an issue where a few visible black frames could be seen during the transition between two MP4 video streams.
[3596293] [Flash Pro] - Corrects an issue where Live Preview would hang when zooming very far (>200%) into content with filters applied
Known Issues:
The following behaviors will be modified in Safari 6.1 and higher in Safe Mode:
AIR Badge Installs - AIR Badge Installer will not launch an installer when running Safari 7 in Safe Mode. Users will instead see a dialog with a link to more details and workarounds on an Adobe website.
Adobe Connect Plug-In Install - The Connect Plug-In Express Install will no longer work on Safari 7 in Safe Mode. Users will instead see a dialog with a link to more details on an Adobe website.
Flash Player Global Settings - When a users launches the Global Settings menu from the Flash Player context menu on Safari 7 in Safe Mode, the user will be taken to the classic SWF-based preferences menu on an Adobe website, instead of the native Flash Player settings UI in the MacOS Control Panel.
LocalConnection - When a LocalConnection is constructed from a SWF hosted in Safe Mode, it may only establish a connection with other SWFs also hosted in Safe Mode. If a LocalConnection is constructed from a tab with Safe Mode disabled, it will not be able to communicate with a SWF in a Safe Mode tab.
For complete information please see our release notes.
Current Flash Player desktop users that have enrolled in the "Allow Adobe to install updates (recommended)" option will automatically receive the update within 24 hours. User's that have selected "Notify me to install updates" update options will receive an update notification dialog within 7 days from today (please note that Windows users will need to restart their system to receive the notification dialog.)
If you would like to install the update immediately, please use one of the links below:
Flash Player 11.7 desktop for Windows XP, Vista and 7: 11.9.900.117
Flash Player 11.7 desktop for Windows 8: 11.9.900.117
Please note that both Flash Player for Google Chrome and Microsoft Internet Explorer for Windows 8 are updated using a different mechanism. Flash Player for Google Chrome updates will occur during regular Chrome updates. Flash Player updates for Internet Explorer on Windows 8 will be provided by Microsoft though the Windows automatic update feature.
Flash Player 11.7 desktop for Mac: 11.9.900.117
Flash Player 11.2 desktop for Linux: 11.2.202.310
Beginning July 9th, 2013 we have changed the version of our "extended support release" from Flash Player 10.3 to Flash Player 11.7 for Mac and Windows. To continue to stay current with all available security updates you will need to install the 11.7 extended support release or update to the most recent available release (11.8, etc.). For full details, please see this blog post:
Extended Support Release Updated to Flash Player 11.7
Flash Player 11.7 desktop for Windows, Macintosh and Linux: 11.7.700.242
Previous versions of Flash Player can be found on the Archived Flash Player page
If you encounter a problems with broken or missing links, please clear your browser cache and try again. If the problem persists, please create a new post in our forum or send email to [email protected].

I cannot answer any of your questions, but I can point you to a different installer: http://fpdownload.macromedia.com/get/flashplayer/current/licensing/mac/install_flash_playe r_11_osx.dmg

I fixed the Flash Player Problem...Here's How

Okay, this worked for me. Whether it will work for you, I hope so. Thanks to Duelly Noted for much of the work, and dumb luck for the rest.
First, you need 3 user accounts for windows. When you open the start menu, on the top is the username and the icon you use. Click on the icon, and it will go to manage accounts. Now, make sure your account is set to administrator. Create 2 new accounts, and make sure BOTH are set as administrators, not users!!!
Now to make it simple, I am going to use letters to name the accounts.
A-Your main account, with the Flash Problem
B- A second account
C-The account you want to use as your new one
You need to download the Flash installer, on both A and C. Here is the link:
http://kb2.adobe.com/cps/141/tn_14157.html
While you are logged into A and C, you must install on both accounts. Install to desktop.
In account A, download and install the uninstaller. uninstall flash player with the uninstaller above. DO NOT UNINSTALL through WINDOWS PROGRAMS! Run whatever you use to clean your account, Disk Cleanup, etc. Restart your computer. Log out of the account. Log into account B, it takes a moment to set the desktop. Then log out. Log into account C, and uninstall Flash Player from there. With the uninstaller!!! Now clean that account too. Restart again. Log out of C. Restarting helps clean the old files out. Log back into B, and transfer all your files from A to C. Then log back into B. Here's how:
Click the start Menu, click computer, then click your C: drive. click Tools, click Folder Options, click the View tab, click Show hidden files and folders, click to clear the Hide protected operating system files check box, and then click OK. Locate the user account for A, where C is the drive on which Windows is installed, and Old_Username is the name of the profile you want to copy user data from. Highlight each file and subfolder in this folder, except the following files: * Ntuser.dat * Ntuser.dat.log * Ntuser.ini. On the Edit menu, click Copy. # Locate the C:\Documents and Settings\New_Username folder, where C is the drive on which Windows XP is installed, and New_Username is the name of the user profile that you created in the "Create a New User Profile" section. # On the Edit menu, click Paste. Log off the computer, and then log on as the new user. Note You must import your e-mail messages and addresses to the new user profile before you delete the old profile. For more information, click the following article number to view the article in the Microsoft Knowledge Base: 313055 (http://support.microsoft.com/kb/313055/ ) Mail folders, address book, and e-mail messages are missing after you upgrade to Microsoft Windows .
Now log on C. Then make sure EVERYTHING transferred. It worked on mine, but as far as Outlook, or Mail, your contacts should be imported, and hopefully your messages, too. Then unless you are prompted to log in there, you will have to reset your settings. If you don't know how, contact your service provider for your internet.
If everything is transferred fine, then make sure A and B are logged off. But first make sure all your files and accounts are working. Since C is administrator, simply delete A and B. Then you are left with C, and a destination for a working Flash. At this point, clean and defrag your drive.
Then install flash on C. What I figure is the Flash Problem might be code, and if you have Flash on A and C, whatever problem transfers with your files. Without 2 Flashes to go to, it just gets lost.
This worked great for me, I hope it works for you too. I pray that I didn't miss a step, but as far as physical computer problems, I am great. With software, I am still learning. But between what I have been suggested to do, and a little bit of conjecture, I now have Flash.
P.S. Adobe support is WORTHLESS on this! I contacted them, and they told me they couldn't help me without registering my product. But you can't since Flash is a free program and there is not serial number, which is the first step to register a program. Then, they followed up with 3 responses asking if my problem had been solved, or to contact them. BUT you just said you couldn't help me unless I registered. Then they considered my problem closed and that was that. I replied with exactly what they said to me, and reopened the case. You know, just for the heck of it. Then, HA HA, they sent me a survey asking how the help went for me. Oh, I enjoyed that survey indeed.

I apologize for that. Here is the problem I was having:
With two particular sites, espn.com and ign.com, though I have heard it happened on many other sites as well. On these sites, the flash content for backgrounds, advertisements, everything else would run fine. The issue was with the video content. On ESPN.COM, if I wanted to watch a larger video the length of the screen, when I loaded it the screen would freeze on a still image, and the sound would play but not the video. On the still image, a white play arrow would be static with a white circle around it. If I called up the Flash settings menu, it would be inoperative, frozen, and you could not close it. On smaller videos, the box would stay black with no picture, no sound. If I called up the Flash menu, same thing would happen, frozen. On IGN.COM, pretty much the same thing. Other Flash content would load fine, but not videos. On the link to a video, a Flash advertisement next to the video box would play, but not the video. Occasionally, an ad would play in the video screen fine, but no requested video. All black, with a frozen Flash settings menu. That's pretty much it, sorry for leaving that out. But on every other site I visited with video (ie. Youtube, gamespot, etc.) everything would run fine. But the two in question are a couple of the sites I visit most, so I was on a mission to fix it.

Problem with performance in flash player 11.4.402.287

Hi,
We found the problem in 11.4.402.287 flash player. IN Debug version, Flex application works fine but in standard version we experience problems with performance.
This happens only in 11.4.402 version for Firefox. In another browsers and Flash player versions everything works fine.
For example, 11.3 for Firefox does not have this problem.
Application has a lot of small objects that receives rollover and rollout events and depend on object highlited some of these objects

Hi,
Can you try 11.5 beta? http://labs.adobe.com/downloads/flashplayer11-5.html
thanks,
Hitomi

Flex Builder 3 Beta 3 Debugging not working with latest Flash Player Debug

First to emphasize that never had such issues with Flex
Builder 2 Beta 2 and Flash Player 9.0.47 Debug version.
I downloaded Flex Builder 3 Beta 3 and installed it. Then
trying to debug any Flex app (old or newly created) does not work.
I don’t get any errors, but after some research I saw
it’s nagging up on trying to connect to the Flash Player
debug version.
1. Uninstalled old versions of Flash Player (FP).
2. Downloaded latest debug version of FP 9 (9.0.115) and
installed it both for IE and Opera (Netscape-compatible).
3. Installed Flex Builder 3 Beta 3.
4. Created a simple Flex app.
5. Ran it in debug mode.
6. Showed a small window with title “Progress
Information” and a progress + text: Waiting for Flash Player
to connect to debugger…
7. Two minutes later I got the error: “Failed to
connect; session timed out. Ensure that: 1. You compiled your Flash
application with debugging on. 2. You are running the debugger
version of Flash Player.”
Any idea what is wrong? I tried to download an older debug
version but then FB 3 Beta 3 raises the error it’s expecting
version 9.0.115. I searched to download FB3 Beta 2 (because I
deleted it after downloading Beta 3) but unfortunately Adobe did
their best to wipe it out from their links.
Any help is welcome.
System Specs:
Windows Vista Ultimate
Flex Builder 3 Beta 3 Standalone
JRE 1.6 Update 3
-Dimitar

Hi Dimitar,
Did you close all the browsers (and applications which use
Flash Player) when you install Flex Builder 3 Beta 3 or Flash
Player? You can try manually installing it from <FB install
location>/player/ directory. Here're some
installation/unintallation instructions of Flash Player:
http://labs.adobe.com/wiki/index.php/Flex_3:Release_Notes#Installing_Flex_SDK_3_Beta_3
thanks,
Sharon

Flash Player is small

Similar Messages

Maybe you are looking for