Flash Player problem on more than one PC
Hi,
I'm a local IT admin and have an issue where four users keep having the same problem. What they say is that after a Windows update and reboot their Flash Player stops working. Uninstalling and reinstalling Flash Player fixes the issue, but they are not admins of their machines and so cannot do this. Windows updates are controlled by Group Policy here and I have no way of changing this either.
However, going on what the users have said I am not entirely sure that Windows updates is the issue. I have a users PC to test today and my last test did not produce the same result as what the users are saying (more on that step below).
Reading through some of the threads I think I have checked most solutions but please review what I have done and suggest anything I may have missed.
OS - WinXP SP3
Browser - IE8 32bit
Visit www.adobe.com/software/flash/about/? - flash animation doesn not appear but it does show the version information (10.2.153.1)
Is the Shockwave Flash object addon enabled - yes
Disable all other addons
Internet Security Zone - set to medium, also reset browser settings
Disable AV and popup software
Updated Java
Kill bit reg change - the entry was there but deleting it made no difference
Installed Firefox and the flash player works (yet to know if this will be affected by the same issue though)
Flash Player file details in image below
So as mentioned above my last step was to remove the latest Windows updates. There were two of them applied the previous night (KB2511455 & KB2508429). I uninstalled and reinstalled Flash Player (now at version 10.2.159.1), checked it worked and reapplied the Windows updates. Rebooted but Flash Player still works. So I am unsure as to what is causing the problem; I'm expecting it to happen again but I hope by then a solution will have been found.
If you need me to test anything else, there are other machines that have the issue.
Thanks and regards,
Brad
Here are the details of the Flash files installed...
Thanks for your response, that file was indeed the problem. The shockwave object was looking at the older file, so I had to run the uninstaller, delete the file manually and then reinstall the latest version.
There does seem to be some reoccuring issue on some of the workstations here in my office and I'm still not quite sure the reason for it.
From my observations what seems to happen is this:
- a new version of flash player is installed (the previous version files are left in the macromed directory)
- all works OK for a while
- then something triggers the Shockwave object to look at the older file and I have the instance where is says flash is installed but not working
This has just happend on a workstation upgrading from 10.2 to 10.3 this past week.
Can anyone think of a reason for this?
Similar Messages
-
is there a way i can submit my crash report here so someone could look at it and let me know what's causing the issue
Mon Jan 7 10:46:09 2013
panic(cpu 1 caller 0xffffff8016cb7b95): Kernel trap at 0xffffff8016c43c71, type 14=page fault, registers:
CR0: 0x0000000080010033, CR2: 0xffffbf802ba06d38, CR3: 0x00000000396ac000, CR4: 0x0000000000000660
RAX: 0x0000000000000000, RBX: 0x0000000000000000, RCX: 0x0000000009000000, RDX: 0xffffff8019f70260
RSP: 0xffffff80fe9b38c0, RBP: 0xffffff80fe9b38f0, RSI: 0xffffff80fe9b3998, RDI: 0xffffff8019f70250
R8: 0x0000000000001000, R9: 0x0000000000000000, R10: 0xffffff802b8b2894, R11: 0xffffff7f983e2c32
R12: 0xffffbf802ba06d30, R13: 0xffffff8019f70250, R14: 0xffffff80fe9b3998, R15: 0x000000000000d000
RFL: 0x0000000000010286, RIP: 0xffffff8016c43c71, CS: 0x0000000000000008, SS: 0x0000000000000010
Fault CR2: 0xffffbf802ba06d38, Error code: 0x0000000000000000, Fault CPU: 0x1
Backtrace (CPU 1), Frame : Return Address
0xffffff80fe9b3560 : 0xffffff8016c1d5f6
0xffffff80fe9b35d0 : 0xffffff8016cb7b95
0xffffff80fe9b37a0 : 0xffffff8016cce4ad
0xffffff80fe9b37c0 : 0xffffff8016c43c71
0xffffff80fe9b38f0 : 0xffffff8016c435a2
0xffffff80fe9b39d0 : 0xffffff8016c245bd
0xffffff80fe9b3a00 : 0xffffff8017022a92
0xffffff80fe9b3a20 : 0xffffff801704a488
0xffffff80fe9b3a90 : 0xffffff801704a91d
0xffffff80fe9b3ad0 : 0xffffff7f983bf32b
0xffffff80fe9b3b50 : 0xffffff7f983e2d00
0xffffff80fe9b3ba0 : 0xffffff8017065313
0xffffff80fe9b3bc0 : 0xffffff8017065eed
0xffffff80fe9b3c20 : 0xffffff80170638ef
0xffffff80fe9b3d70 : 0xffffff8016c981a1
0xffffff80fe9b3e80 : 0xffffff8016c20abd
0xffffff80fe9b3eb0 : 0xffffff8016c10448
0xffffff80fe9b3f00 : 0xffffff8016c195fb
0xffffff80fe9b3f70 : 0xffffff8016ca5ad6
0xffffff80fe9b3fb0 : 0xffffff8016cced13
Kernel Extensions in backtrace:
com.apple.GeForce(8.0)[91C40470-82BA-329A-A9D7-4C70F28275FD]@0xffffff7f9839f000 ->0xffffff7f98461fff
dependency: com.apple.NVDAResman(8.0.0)[6A699209-FB98-316B-A3C0-DCA82AA8C86B]@0xffffff7f973 47000
dependency: com.apple.iokit.IONDRVSupport(2.3.4)[E37F420A-B5CD-38ED-9441-5247583B6ACE]@0xff ffff7f97333000
dependency: com.apple.iokit.IOPCIFamily(2.7)[8C9E06A4-13D0-33F5-A377-9E36F0ECC229]@0xffffff 7f972ac000
dependency: com.apple.iokit.IOGraphicsFamily(2.3.4)[5D671681-D21B-3CCA-9810-B15E648C1B27]@0 xffffff7f972f0000
BSD process name corresponding to current thread: WebProcess
Mac OS version:
12A269
Kernel version:
Darwin Kernel Version 12.0.0: Sun Jun 24 23:00:16 PDT 2012; root:xnu-2050.7.9~1/RELEASE_X86_64
Kernel UUID: 8D5F8EF3-9D12-384B-8070-EF2A49C45D24
Kernel slide: 0x0000000016a00000
Kernel text base: 0xffffff8016c00000
System model name: MacBookPro5,5 (Mac-F2268AC8)
System uptime in nanoseconds: 313602632952
last loaded kext at 175849006273: com.apple.filesystems.smbfs 1.8 (addr 0xffffff7f97216000, size 229376)
last unloaded kext at 176246764692: com.apple.driver.AppleFileSystemDriver 3.0.1 (addr 0xffffff7f98d75000, size 8192)
loaded kexts:
com.apple.filesystems.smbfs 1.8
com.apple.driver.AppleHWSensor 1.9.5d0
com.apple.driver.AudioAUUC 1.60
com.apple.driver.AGPM 100.12.69
com.apple.filesystems.autofs 3.0
com.apple.iokit.IOBluetoothSerialManager 4.0.9f8
com.apple.driver.AppleMikeyHIDDriver 122
com.apple.driver.AppleHDA 2.3.0f2
com.apple.driver.AppleMikeyDriver 2.3.0f2
com.apple.iokit.BroadcomBluetoothHCIControllerUSBTransport 4.0.9f8
com.apple.driver.AppleSMCLMU 2.0.2d0
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.ApplePolicyControl 3.2.6
com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0
com.apple.driver.AppleUpstreamUserClient 3.5.10
com.apple.driver.AppleBacklight 170.2.3
com.apple.driver.AppleMCCSControl 1.0.33
com.apple.driver.AppleLPC 1.6.0
com.apple.GeForce 8.0.0
com.apple.driver.SMCMotionSensor 3.0.2d6
com.apple.driver.AppleUSBTCButtons 235.4
com.apple.driver.AppleUSBTCKeyboard 235.4
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 34
com.apple.driver.AppleIRController 320.15
com.apple.driver.AppleUSBCardReader 3.1.0
com.apple.iokit.SCSITaskUserClient 3.5.1
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.2.0
com.apple.driver.AirPort.Brcm4331 600.15.20
com.apple.driver.AppleSmartBatteryManager 161.0.0
com.apple.driver.AppleUSBHub 5.1.6
com.apple.driver.AppleFWOHCI 4.9.5
com.apple.driver.AppleAHCIPort 2.4.0
com.apple.nvenet 2.0.19
com.apple.driver.AppleUSBEHCI 5.1.5
com.apple.driver.AppleUSBOHCI 5.1.5
com.apple.driver.AppleEFINVRAM 1.6.1
com.apple.driver.AppleRTC 1.5
com.apple.driver.AppleHPET 1.7
com.apple.driver.AppleACPIButtons 1.6
com.apple.driver.AppleSMBIOS 1.9
com.apple.driver.AppleACPIEC 1.6
com.apple.driver.AppleAPIC 1.6
com.apple.driver.AppleIntelCPUPowerManagementClient 196.0.0
com.apple.nke.applicationfirewall 4.0.39
com.apple.security.quarantine 2
com.apple.driver.AppleIntelCPUPowerManagement 196.0.0
com.apple.kext.triggers 1.0
com.apple.iokit.IOSerialFamily 10.0.6
com.apple.driver.DspFuncLib 2.3.0f2
com.apple.iokit.IOAudioFamily 1.8.9fc9
com.apple.kext.OSvKernDSPLib 1.6
com.apple.iokit.IOFireWireIP 2.2.5
com.apple.iokit.AppleBluetoothHCIControllerUSBTransport 4.0.9f8
com.apple.driver.AppleHDAController 2.3.0f2
com.apple.iokit.IOHDAFamily 2.3.0f2
com.apple.iokit.IOSurface 86.0.2
com.apple.iokit.IOBluetoothFamily 4.0.9f8
com.apple.driver.IOPlatformPluginLegacy 1.0.0
com.apple.driver.AppleGraphicsControl 3.2.6
com.apple.driver.AppleBacklightExpert 1.0.4
com.apple.driver.AppleSMBusController 1.0.10d0
com.apple.driver.IOPlatformPluginFamily 5.2.0d16
com.apple.driver.AppleSMBusPCI 1.0.10d0
com.apple.nvidia.nv50hal 8.0.0
com.apple.NVDAResman 8.0.0
com.apple.iokit.IONDRVSupport 2.3.4
com.apple.iokit.IOGraphicsFamily 2.3.4
com.apple.driver.AppleSMC 3.1.3d11
com.apple.driver.AppleUSBMultitouch 235.7
com.apple.iokit.IOUSBHIDDriver 5.0.0
com.apple.iokit.IOSCSIBlockCommandsDevice 3.5.1
com.apple.iokit.IOUSBMassStorageClass 3.5.0
com.apple.driver.AppleUSBMergeNub 5.1.5
com.apple.driver.AppleUSBComposite 5.0.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.5.1
com.apple.iokit.IOBDStorageFamily 1.7
com.apple.iokit.IODVDStorageFamily 1.7.1
com.apple.iokit.IOCDStorageFamily 1.7.1
com.apple.iokit.IOAHCISerialATAPI 2.5.0
com.apple.iokit.IOSCSIArchitectureModelFamily 3.5.1
com.apple.iokit.IO80211Family 500.15
com.apple.iokit.IOUSBUserClient 5.0.0
com.apple.iokit.IOFireWireFamily 4.5.5
com.apple.iokit.IOAHCIFamily 2.2.0
com.apple.iokit.IONetworkingFamily 3.0
com.apple.driver.NVSMU 2.2.9
com.apple.iokit.IOUSBFamily 5.1.6
com.apple.driver.AppleEFIRuntime 1.6.1
com.apple.iokit.IOHIDFamily 1.8.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 220
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 7
com.apple.driver.DiskImages 344
com.apple.iokit.IOStorageFamily 1.8
com.apple.driver.AppleKeyStore 28.18
com.apple.driver.AppleACPIPlatform 1.6
com.apple.iokit.IOPCIFamily 2.7
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.corecrypto 1.0 -
Problem with more than one item in a track
DVDSP 4.0.2 / OSX.4.2 I've built a DVD with several tracks. In each track I've placed several .m2v files, one after another. Finished build plays fine on my Mac and on one of my stand alone DVD players. But on another stand alone (Sony DVP-S360) something very odd happens. DVD begins to play just fine, but whenever it encounters a track with more than one source file, it will play until it gets to the spot in the program where the second source file is in the track and then it hangs and won't do anything. I'm just curious if anyone has any insight into this problem. Is it a DVDSP conflict thing with certain players? Or is this Sony player just not capable of playing a DVD built this way? Thanks.
This page here:
http://www.videohelp.com/dvdplayers.php?DVDnameid=428&Search=Search&
has someone talking about finally getting burned DVDs to work, which suggests they previously had problems. I can't think why the track would not seem like continuous video, as if it had always been that way. Our Sony DVD player at work seems sensitive to higher data rates. What data rate did you use? -
Problem deploying more than one session beans(one is ok)
hi there,
im trying to deploy an ear that contains ejbs(entities and session). application goes ok if deploy it with any number of entities being called by a single session, i mean if there is only session bean in the ejb-jar.xml. it is deployed ok and works fine.
now when i try to add another session bean to the same ejb-jar.xml, it gives the following error during deployment.
The system is out of resources.
Consult the following stack trace for details.
java.lang.OutOfMemoryError
that's all what it prints and aborts deployment. again, its important that it deploys any number of entity beans problem is with more than one sessions.
thanx for any suggestions,
amtWithout seeing more details I don't understand why you would be running out of memory. We test applications with multiple session beans and we don't have that issue so I'm not sure why you would. Out of memory could be a bug in the deployment descriptor or the ear file or the JVM or the container or the deployment mechanism or maybe something else. That is the tough part of memory issue debugging at deployment time.
I would try to see if increasing memory on both the JVM for OC4J and for admin.jar (assuming you are using standalone OC4J when you deploy) to see if maybe it is something transient that is causing this to occur. Something else you could try is to use 1.3.1 JDK and see if the problem goes away. Beyond that I would try to get the simplest case you could that repeats the error and then let's take a look at it.
As for the exception hierarchy you describe, I don't see any particular problem with it at first look. Are you getting an error?
Thanks -- Jeff -
I am having problems emailing more than one photo at a time - please help!
I would be very grateful if anyone can help. I have recently upgraded my old PowerBook G4 to Leopard 10.5.8, and since the upgrade I can't seem to send more than one image from iphoto at a time via mail. When I try, I get the message: " mail got an error: can't get paragraph 8 of content of outgoing message id 113491328. Invalid index." As I email a lot of images, it is a real pain only being able to send them one at a time. Can anyone help? With many, many thanks, Josh.
It could have something to do with the sizes of the images you're trying to send.
In the updated iPhoto, there's a selection for the size of the image. Try attaching the smallest size and see if that works for you.
Here's a related couple of threads related to the error that I found on a popular search engine
--> http://discussions.apple.com/thread.jspa?threadID=1666379
--> http://discussions.apple.com/thread.jspa?threadID=1667250 -
Problem Using more than one patchset for Kernels
I'm using vanilla 2.6.10 sources, with the -mh4 bluetooth patch, but I also want to apply the -as patch, as Arch has now adopted it for the standard kernel. So I have the following lines in the PKGBUILD:
##### Apply any patches here, if you set the patch variable above uncommment the following line
patch -Np1 -i ../patch-2.6.10-as5 || return 1
patch -Np1 -i ../patch-2.6.10-mh4 || return 1
and I have the patches downloaded into the build directory. When I run makepkg, I get a HUNK FAILED error at the patching stage, and makepkg aborts. If I run it with the -mh4 patch only, it works OK.
I realise this is nothing to do with the PKGBUILD, which I am sure will produce a uniquely-named package in about 30 minutes or so. Would you have any general advice regarding the use of more than one patch?yeah - i have done this with a few patchsets. it's easy if you know what you are doing.
i'll explain what is happening just in case you don't know - all patches are created based on the original code and work by matching existing code and replacing it with new code - if you apply one patch then another the first patch may alter some of the references that the second patch is try to match - so it fails. what you need to do is to check where it has failed.
it will say patching core.c or something and the it will say HUNK FAILED - that means the first patchset changed the core.c code and the second patch can't find what it is looking for.
you then need to open the first patch - find out where core.c was changed and how and then open the second patch to see what it now needs to look for and then you'll then have to make new diffs to finish the process or eidt the old diffs (which is tricky but shorter)
it ain't easy. if you have more than a few hunk failed don't even bother - there is no guarantee that they patches will provide a build-able kernel.
this whole process lies at the core of creating these massive patchsets - if you can combine both patchsets and get a successful build out of it you can consider yourself a novice kernel hacker. it can be done.
i can't help much more than that i'm afraid - i'll ask cactus to split these two posts too a new thread for you -
Problem :fetching more than one record
In the below code ,i am receiving error that '"fetch returns more than record"..Is there any way to solve this problem
declare
cursor cur_test is
select * from test_for_cursor where i=&i for update;
r test_for_cursor%rowtype;
r1 test_for_cursor.i%type;
begin
open cur_test;
loop
fetch cur_test into r;
exit when cur_test%notfound;
update test_for_cursor set i=r.i+2 where i=r.i returning i into r1;
dbms_output.put_line(r1);
end loop;
close cur_test;
end;Try this
DECLARE
CURSOR cur_test
IS
SELECT *
FROM test_for_cursor
WHERE i = &i
FOR UPDATE;
r test_for_cursor%ROWTYPE;
TYPE r1_typ IS TABLE OF test_for_cursor.i%TYPE;
r1 r1_typ;
BEGIN
OPEN cur_test;
LOOP
FETCH cur_test
INTO r;
EXIT WHEN cur_test%NOTFOUND;
UPDATE test_for_cursor
SET i = r.i + 2
WHERE i = r.i
RETURNING i
BULK COLLECT INTO r1;
FOR j IN 1 .. r1.COUNT
LOOP
DBMS_OUTPUT.put_line (r1(j));
END LOOP;
END LOOP;
CLOSE cur_test;
END;Some correction.
Message was edited by:
michaels -
Problem calling more than one instance of a dll from TestStand
Hi,
I've posted this message in the LabWindows forum a few days ago and haven't gotten any answer. I have made a DLL with the evaluation version of LabWindows 7.1 to connect to a Telnet server and perform various commands. This DLL is used with TestStand 3.1 . In TestStand, I have to connect simultaneously to the same Telnet server twice to start an application with both of those connection, with different parameters. I use Threads in TestStand to call the DLL and everything seems to be fine on that side. I enter the DLL at the same time for both threads but it seems that the 1st thread waits until the 2nd thread is at the end of the function before he executes the InetTelnetOpen command to start the Telnet session. Is it normal that we can only have one Telnet connection at a time?
To see that I've placed some time stamps in a log. For the first Thread, almost a minute passes by between the first 2 time stamps but in the 2nd thread it take less than a second.
Yet, they both wait for eachother to exit the DLL as the time stamp at the end of the execution is the same.
I really need some enlightenment here ;-)
Louis
Attachments:
TelnetTest.txt 3 KBTiwi,
The blocking that InetTelnetRunScript does is probably there for a reason. That method is probably not safe for multiple threads to call into at the same time. There is likely another way to do what you are trying to do that can be done in parallel. Perhaps with lower-level telnet function calls. I recommend you post to the CVI forum asking if there is another way to do what you are trying to do from multiple threads in parallel. This does not sound like a teststand issue. If you are calling into your dll from multiple testand threads, then the code in your dll function is being executed in parallel. The cvi function you are calling however, might not be reentrant (reentrant means able to be called by multiple threads in parallel) so it is making one of your threads block until the other completes. I suspect there is a different way to do what you are trying to do that will not have this problem, but I think the changes that you will need to make will be in the dll and not on the teststand side. I recommend you post to the CVI group and explain what you are trying to accomplish and see if they have a solution for you.
Hope this helps,
-Doug
P.S. Each process on the Windows operating system (of which teststand is one) can only load one copy of any particular dll at a time. Also, loading multiple copies is not something that would be likely to solve the problem you are running into. One possibility is to use the call executable step type and create an executable that does what your dll function does, but that is probably not the best solution and might still end up blocking at the same location. The best solution is probably to use an alternate method of accomplishing whatever you are trying to do with the telnet function you are calling that does not have the limitations of that function. -
Can't type on Flash-based site with more than one window open.
When I try to use certain sites, I think flash, my Macbook will not allow me to type. For example, on the site "Prezi," I can type on my presentation right after I open the file, but as soon as I open a new Safari window and then return to Prezi, I can't. I have experienced this before with the site "Pandora" as well, and can only occasionally type in the search fields there. Please help!
I am having very similar problems. We have three macbooks in the house. Mine is the older version but I have done all the upgrades. The new ones all type fine into flash based programs like prezi and voicethread, whereas I can only paste text into the program.
-
Problem Making More Than One ALSB Call From BPM
Hello,
I have a very simple BPM process, with a begin node, two automatic nodes, and an end node.
The first automatic node makes a call to a web service running on ALSB (ALSBServiceA)
The second automatic node makes a call to a second web service running on ALSB (ALSBServiceB)
What I find happening is that the second call is not being executed (ALSBServiceB)
The web service invocation from the first node executes okay, but it seems that the invocation from the second service is just ignored.
What is strange is that if I reverse the order of the nodes (e.g. executed ALSBServiceB before ALSBServiceA) then, the ALSBServiceB executes while ALSBServiceA does not.
It appears that in any process there can only be -one- successful invocation to ALSB, with all others being ignored. This is a pretty significant showstopper for us.
Is this a known issue/bug/feature?Gary,
There is not much I can do from here without more specific details, but
the problem you describe is quite odd.
Try the following, it might help you diagnose it:
- Check the audit trail for one of the instances, to make sure that both
automatic activities were executed.
- Check the engine logs, see if there was an exception in the process
that's causing it to retry or abort the instances.
- Try running both calls from one activity.
If you can't find the cause, contact support. They will be able to help
you.
JC
On Thu, 22 May 2008 10:05:06 -0300, Gary Ng wrote:
Hello,
I have a very simple BPM process, with a begin node, two automatic
nodes, and an end node.
The first automatic node makes a call to a web service running on ALSB
(ALSBServiceA)
The second automatic node makes a call to a second web service running
on ALSB (ALSBServiceB)
What I find happening is that the second call is not being executed
(ALSBServiceB)
The web service invocation from the first node executes okay, but it
seems that the invocation from the second service is just ignored.
What is strange is that if I reverse the order of the nodes (e.g.
executed ALSBServiceB before ALSBServiceA) then, the ALSBServiceB
executes while ALSBServiceA does not.
It appears that in any process there can only be -one- successful
invocation to ALSB, with all others being ignored. This is a pretty
significant showstopper for us.
Is this a known issue/bug/feature?--
Using Opera's revolutionary e-mail client: http://www.opera.com/mail/ -
Jsp session problem when more than one user is loging from the same machine
Hi everybody,
I have created a login page and i use to store user name and password using sessions. It is working fine for one user from one machine. But if two or more users logged from the same machine, all the users are getting the same data as of the last user logged in. Also if one user is logged out all user sessions on that machine are expiring (same as previous YAHOO problem).
i think there is problem with session variables. The user name and password which i am storing in session variables are updating the same variables for all users. I think a seperate set of session variables are not creating for each user login.
Can any body help me plz....
regards,
Prasanth.CFirst, you need to clear any cookies you are setting.
Second, you need to synchronize some key data fetching blocks in your servlet.
Third, ensure that you are invalidating a session properly.
Don't ask me for more details. Google around for information ;)
Richard. -
TextLineMirrorRegions - problems if more than one in a line
The example in the AS3.0 reference for TextLineMirrorRegions shows text elements that turn red when clicked. It works fine when each region falls on its own line. But if the line width is changed from 150 to 850, so both regions fall in the same line, only the first one turns red no matter which one you click.
I discoverd this while writing an html parser that would underline and activate lnks (eg <a href=...>text</a>) and found that if two links were on the same line, only one is underlined and no matter which one you click you go to the link of the first. So the underlining code pasted into the example code looks like this:
var groupVector:Vector.<ContentElement>=new Vector.<ContentElement> ;
groupVector.push(new TextElement("one", blackFormat));
groupVector[groupVector.length-1].eventMirror=myEvent; // underline this element when added
groupVector.push(new TextElement(" and ", blackFormat));
groupVector.push(new TextElement("two", blackFormat));
groupVector[groupVector.length-1].eventMirror=myEvent;
groupVector.push(new TextElement(" and ", blackFormat));
groupVector.push(new TextElement("three", blackFormat));
groupVector[groupVector.length-1].eventMirror=myEvent;
groupVector.push(new TextElement(".", blackFormat));
myEvent has a listener for "addedToStage" that looks like this:
private function myHandler(event):void {
var line:TextLine=event.target as TextLine;
var region:TextLineMirrorRegion=line.getMirrorRegion(myEvent);
var selected:TextElement=region.element as TextElement;
trace("underlining " + selected.text);
var box:Sprite = new Sprite();
box.graphics.lineStyle(1, color, 1);
var color=0x000000;
box.graphics.moveTo(region.bounds.x , region.bounds.y + region.bounds.height);
box.graphics.lineTo(region.bounds.x + region.bounds.width, region.bounds.y + region.bounds.height);
line.addChild(box);
With a narrow line width in the createLines function, everything works properly. But if it is widened, all three events dispatched reference the first mirror region so the word "one" gets underlined three times (the trace shows this.)
I've inspected textLine.mirrorRegions and all three are there. When the event is triggered, the region referenced always shows nextRegion as null. I can't see anything in the event that indicates which region to act on - what am I missing? On the mouse click event, I can determine the mouse position but I still can't figure out how to get the userData (which has the href url) from the right mirror region from that (unless, I guess, I iterate through all the line's regions and inspect their bounds - but that seems like a kludge, and still doesn't help with the addedToStage event.)update: I have this working now my iterating through textLine.mirrorRegions on each call, but think there must be a better way. So for underlining:
//var region:TextLineMirrorRegion=line.getMirrorRegion(dispatcher);
for each (region in line.mirrorRegions) {
if (region.mirror==dispatcher) {
// draw the sprite
Similarly for the link click, by looking at the region bounds and mouseEvent.localX.
Which means the underline sprite gets drawn three times for the single line of text. I could keep track of which ones have been drawn, I guess, but is there an easier path than iteration? -
Problem in more than one table control in a BDT screen
HI gurus,
Please help, I have placed two table controls in a BDT screen (same screen), in Business Partner (BP). When I put only one table control then that is working fine but when I place two table controls then problem starts, table don't get scrolled may times, please suggest, its urgent.Hi,
Try to implement the notes
800369
789747
768803
768479
754237
And if this doesnt solve problem, then describe the problem in detail.
Smita. -
Problem sending more than one meaasage to server
iam writing a program where a cleint connect to a server and sends an Message Object across (where my message object is a class with many attributes) so i break it down into a byte array and send it to the server... this is fine the server accepts it and display the masseage fine but
when i try to send another message it doesnt recieve it, and the problem is not with the server as it will accept messages if i connect another client to it
here is my code for sending the message.. any suggestions??????????????
public void sendMessageToServer(Message message) throws java.io.IOException
byte[] data;
data = message.messageToBytes(message);
out.write(data,0,data.length);
out.flush();
messageToBytes(message); simply break the message down into a byte array and returns itits fine i got it, i was waiting for a new client to connect before i wud accpet there message hance it working for different clients and not for the one already connected.... anyway back to work
-
Adobe Flash Player Wont Work More than Once
When trying to watch a video on youtube i got a message saying i needed to intstall the latest version of flash, so i downloaded it and it worked perfectly.
The next time i went onto my computer and tried to watch a video i got the same message so i downloaded flash again and noticed that i already had that version of flash, anyway it worked.
So then the next time i used my pc i got the message again but didnt bother downloading flash again i checked to make sure flash was enabled and it was then tried uninstalling then reinsstalling flash again but the problem persists.
I basically have to download flash again evry time i turn on my pc.
(I am using IE 8 but had the same problem with IE7)
(i am using Vista)That is very strange; try this
download the FP uninstaller from http://www.adobe.com/go/tn_14157 (save to disk);
download the offline ActiveX installer http://fpdownload.macromedia.com/get/flashplayer/current/install_flash_player_ax.exe save to disk);
close all browser windows, then run the downloaded uninstaller, followed by the installer.
Maybe you are looking for
-
Problem with JVM running in Windows XP
Hello guys, I am having a problem running my JVM on my Windows XP machine as the default JavaScript handler for both IE and Firefox. Basically, each time I run any webpage with Java Script of some kind, my browser window just closes off completely an
-
Why won't the sound in Windows 8.1 pro work on my mac?
I installed all the drivers that came with bootcamp and installing new drivers doesn't seem to do any good
-
My sons ipod touch says ipod disabled connect to itunes and then doesnt work,what do i do?
how do i unlock my sons "disabled ipod"?
-
I've recently upgraded my laptop, and had to reinstall RoboHelp 8. While I have the same operating system (Windows XP Professional), the version of Internet Explorer was upgraded from 6 to 7. The installation went without a hitch, and RoboHelp HTML l
-
CREATE PROC [dbo].[SP_DropForeignKeys] AS BEGIN DECLARE @FKTABLE_OWNER SYSNAME, @FKTABLE_NAME sysname, @FK_Name sysname DECLARE Cursor_DisableForeignKey CURSOR FOR SELECT schema_name(schema_id), object_name(parent_object_id), name FROM sys.for