Flash player will stop playing after a while, when viewing certain streams in fullscreen mode.

Hey, can you help me with this problem?
When I start vieweing certain video streams, such as this one http://www.animefreak.tv/watch/hentai-ouji-warawanai-neko-episode-1-online the player would play for a while, then suddenly lose sound, and after 5 seconds or so, it will stop playing.
If I click for pause, then play again it will work for a while, but it's very annoying and there's not much I can do about it.
I have the same problem on 2 computers, with 2 different OS's (windows 7 & 8).

I suspect you are running into the bug that is described here:
Flash Player 11.7 Sound Playback Bug

Similar Messages

  • My music will not play after it gets to a certain volume. It works fine if i turn it up loudly however when i turn it down past a point it will not work and the music wont play.

    My music will not play after it gets to a certain volume. It works fine if i turn it up loudly however when i turn it down past a point it will not work and the music wont play.

    If in settings, music, volume limit is off then restart your phone first. Hold the home and off button down until the apple symbol comes up.

  • Flash player always stops playing videos on youtube and swiches back

    Hello!
    Since the last update for the flash player the player always stops playing videos on youtube after a while and than player swiches back to the side for to choose videos. How to remove the problem?
    Tanks for answering and best greetings
    Tilmann

    Flash Player Help | Installation problems | Flash Player | Windows
    Flash Player Help | Installation problems | Mac OS
    Mylenium

  • Need Help Getting a Flash File to stop playing after 15 seconds

    I was sent 3 flash files at work, however they infinitely
    look and many places require that these stop playing after 15
    seconds. In addition to this, at the 15 second mark at the current
    frame rate, the spot is only 85% complete. I figure I can increase
    the fps but I can't get the spot to stop. The stop code is of
    little use. Any help? Thank!

    you can use setTimeout(yourfunction,15000) to call
    yourfunction after 15000 milliseconds. in yourfunction your can use
    yourMovieclip.stop().

  • Flash Player - sound going off after a while

    I have exported a flash clip as an exe flash presentation file. I am using Windows 7 with flash player 10.
    The flash clip contains 4 seperate video files (movie trailers) which have been imported into flash. I am able to play these fine by running the exe file created in Flash (CS4).
    After a while (10 min or much longer somethimes) the audi goes off but the flash movie still plays without the audio.
    Any ideas what could be wrong?
    I have also improved the quality of the video files that I am using within the flash movie (downloaded them as HD video files and converted them to f4v files in Adobe Media Encoder and imported them into flash to play with flv component. Unfortunately when I try to play the published exe file, when it comes to play the imported video elements the audio plays fine but the images of the movie are jittery. Am i doing something wrong?
    Thanks in advance

    Hi, not sure if you are in the correct forum. You may have more help in the Flash forum.
    I don't understand CS4 and how Flash Player is related, so can't respond to that. Perhaps someone else will.
    You could look on the right hand side for "more like this" when you open your thread since those threads are related to
    issues similar.
    Thanks,
    eidnolb

  • Adobe flash player will not play

    My computer stopped playing videos, it said that I needed to download adobe flash player, I did that but it still will not play videos and t
    he same message appears.

    What is your operating system & version?
    What is your web browser?
    You write that you downloaded it, but did you also install it?

  • Adobe Flash Player will not play my .flv video

    I redered a 5 min editing from Premier CS4 as steaming FLV, but if I try to play it in Adobe Flash Player, the player will open with white background and not play the movie. The file is playing though in other players like Adobe Media Player. Is there something special about a movie flv to play in AFP?
    Thank you,

    FLV needs to be inside of a SWF container that manages it's playback.  The Media Player provides that for you, but the standalone Flash Player doesn't.   So you can make one in Flash easily with components, or you can just download any one of the many free ones (for example, I've personally used Jeroen Wing's "JV Player" from longtail)

  • Flash player will not play flvs from folder with name containing non-Roman Chars

    We're trying to play flash as part of a program that can be installed to locations including non-Roman chars (European, Arabic, Chinese, etc.).  When the installation path includes any non Roman chars, video will not play.  The non-roman chars are garbled when Flash tries to load the flvs. Correct non-Roman chars are: ńśćłł.  When loading video it gets translated to: ńśćłł
    We've found this happens whether we are trying to access the video from the xulrunner app or by taking the activities out and running them within an html frame.
    Audio on the other hand is no problem
    The path information for the xulrunner app from Process monitor is:
    Video not found from the video player.
    10:41:25.3337898    xulrunner.exe    2316    CreateFile    C:\Pro\ńśćłł\Flash dll Test\.shared\content\assets\video\VI-d9e37af511faa\Engplus1.flv    PATH NOT FOUND    Desired Access: Generic Read, Disposition: Open, Options: Sequential Access, Synchronous IO Non-Alert, Non-Directory File, Attributes: n/a, ShareMode: Read, AllocationSize: n/a
    10:41:25.3339452    xulrunner.exe    2316    CreateFile    C:\Pro\ńśćłł\Flash dll Test\.shared\content\assets\video\VI-d9e37af511faa\Engplus1.flv    PATH NOT FOUND    Desired Access: Generic Read, Disposition: Open, Options: Sequential Access, Synchronous IO Non-Alert, Non-Directory File, Attributes: n/a, ShareMode: Read, Write, AllocationSize: n/a
    Audio found.
    10:41:59.7659648    xulrunner.exe    2316    ReadFile    C:\Pro\ńśćłł\Flash dll Test\.shared\content\assets\audio\AU-fa6ed5d31f577\LG0CD1Track06.mp3    SUCCESS    Offset: 0, Length: 4,096, Priority: Normal
    10:41:59.7660482    xulrunner.exe    2316    ReadFile    C:\Pro\ńśćłł\Flash dll Test\.shared\content\assets\audio\AU-fa6ed5d31f577\LG0CD1Track06.mp3    SUCCESS    Offset: 4,096, Length: 4,096
    Video not found from a flash interactive
    10:43:50.0804572    xulrunner.exe    2316    CreateFile    C:\Pro\ńśćłł\Flash dll Test\.shared\content\assets\flash_interactive\content\FL-123456780l0l\assets\video\video. flv    PATH NOT FOUND    Desired Access: Generic Read, Disposition: Open, Options: Sequential Access, Synchronous IO Non-Alert, Non-Directory File, Attributes: n/a, ShareMode: Read, AllocationSize: n/a
    10:43:50.0806413    xulrunner.exe    2316    CreateFile    C:\Pro\ńśćłł\Flash dll Test\.shared\content\assets\flash_interactive\content\FL-123456780l0l\assets\video\video. flv    PATH NOT FOUND    Desired Access: Generic Read, Disposition: Open, Options: Sequential Access, Synchronous IO Non-Alert, Non-Directory File, Attributes: n/a, ShareMode: Read, Write, AllocationSize: n/a
    Audio found from a flash interactive
    10:43:50.1928413    xulrunner.exe    2316    ReadFile    C:\Pro\ńśćłł\Flash dll Test\.shared\content\assets\flash_interactive\content\FL-123456780l0l\assets\audio\journa list.mp3    SUCCESS    Offset: 0, Length: 4,096, Priority: Normal
    10:43:50.1929148    xulrunner.exe    2316    ReadFile    C:\Pro\ńśćłł\Flash dll Test\.shared\content\assets\flash_interactive\content\FL-123456780l0l\assets\audio\journa list.mp3    SUCCESS    Offset: 0, Length: 25,206, I/O Flags: Non-cached, Paging I/O, Synchronous Paging I/O, Priority: Normal

    Not exactly sure what you are doing, but it is obvious that some part of the program you are running does not support multibyte characters like Unicode.
    If you are developing that application, make sure it is Unicode enabled.  If it is Flash (or Flash Player) that doesn't understand it, then you may not be able to do anything about it.
    What I would try if I were to encounter the situation, I would try to use the DOS (8.3) path names, like C:\Documents and Settings would normally be C:\DOCUME~1 or C:\Documents and Settings\All Users would be C:\DOCUME~1\ALLUSE~1 etc.
    Use the DIR /X command to find out what the DOS folder names are.

  • Flash Player will not run after a "successful" installation.

    Over the past couple of weeks, when attempting to play a video or display a picture, I have responded to the prompt that I require the newest version of Flashplayer and have clicked to follow the link. I have done this and installed at least 10 times, the last time being a few minutes ago.  Each time I get the message that the installation was successful and that I am currently running the latest version (11.6 something), but I still get the prompt saying I need a newer version when trying to play the video or display the picture. On your help page where my version or an error message is supposed to display in a box to assisst with trouble shooting, the box remains blank.  On some occasions I have even gone into Control Panel, Program and Features, and have uninstalled Flash Player before reinstalling it. I have aslo tried disabling my virus protection (Norten) although on the times I haven't I have checked in Norton and it says it has allowed the installation.  Nothing makes no difference.  I have gone through a lot of your trouble shooting help suggestions but have found nothing that works.  I have (and have confirmed I have according to the on-line help directions) Windows 7, 64 bit, and Internet Explorer Version 9, 64 bit.  Each time I have downloaded the 64-bit version of Flash player.  Something I have noticed but can't figure out is that when I go into Control Panel, on the first screen ("Adjust your computer settings") there is a Flash Player (32-bit) heading.  After an uninstall this disappears but reappears after installion even though I have definitely chosen the 64 bit download.  I hope you can help me figure out what is going on.

    Flash Player Help | Installation problems | Mac OS
    Archived Flash Player versions
    Mylenium

  • Adobe Flash Player will not play videos on a specific website.

    I use windows 8.1 with a 64-bit operating system and and a x64-based processor. The browser is Firefox 35.0.1 and the Adobe Flash 16.0.0.305. When i attempt to view a video and a specific website the flash player displays its loading circle status before it would normally buffer but continues to load indefinitely and when i attempt to select a quality in the settings (which quality doesn't matter) the player displays a static like picture with he message: An error occurred please try again later, learn more. This has not changed since around 1pm EST. I can however watch YouTube videos without any such difficulty. This is the page in question:http://kissanime.com/Anime/Selector-Spread-WIXOSS/Episode-001?id=80934
    Prior to this i have tried uninstalling and re-installing the flash player as well as following the troubleshooting guide provided by adobe as is found here: https://helpx.adobe.com/flash-player/kb/flash-player-games-video-or.html
    Any help with this issue would be much appreciated, thank you.

    What is your operating system & version?
    What is your web browser?
    You write that you downloaded it, but did you also install it?

  • Flash player will not install after uninstalling

    Hi,
    I  am trying (unsuccessfully) to install the flash player. To view a website it was necessary to have this, i did have it installed but figured that if the website did not acknowledge it there might have been something wrong with it so i uninstalled it.  Now when I try to install it - nothing happens - it goes to the screen which warns about the security settings affecting its download but no warning message comes up, about installing the active x or anything, it just stays on that page. Im using windows vista and internet exlorer. If anybody could help with this i would really appreciate it.
    Thanks

    Download the offline ActiveX installer http://fpdownload.adobe.com/get/flashplayer/current/install_flash_player_ax.exe; save it to disk, then close all browser windows and run the downloaded installer.

  • Firefox won't load pages after a while when viewing tumblr.

    In both versions 6 and 7 if I'm looking at Tumblr or any site that has any java or flash, after a few minutes pages will not load. I've disabled all add-ons and plug-ins but the behavior is the same. I've reverted to using version 5.0 and everything works fine.

    Hello,
    The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
    Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
    To Reset Firefox do the following:
    #Go to Firefox > Help > Troubleshooting Information.
    #Click the "Reset Firefox" button.
    #Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
    #Firefox will open with all factory defaults applied.
    Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
    Did this fix your problems? Please report back to us!
    Thank you.

  • My Nano will stop playing music after a short bit. I have to push play to get it to start up again. I can't remember the fix.

    Help!My Nano will stop playing after a few minutes. I have to push play to get it to start up again. I can not remember the fix.

    See here: iPod nano (6th generation): Music stops when display turns off
    B-rock

  • My iPod shuffle stops playing after a few songs, then it won't start again.

    My iPod shuffle will stop playing after a few songs which is very frustrating while out walking.  I end up having to shut it off for about a minute or two and then turn it back on.  Sometimes it will start playing again, but it will start playing the same songs over again.  I can't go forward or go back.  When I try to skip a song, all I get is dead air.  I took it back to an Apple store and they replaced it free of charge; which I thought was great... that is until the new iPod started doing the exact same thing.  I've downloaded songs from the iTunes store as well as songs off of my personal CD's.  I've tried deleting all the songs and re-installing them... nothing seems to solve this problem.  I know it only costs $50; but if Apple can't get a $50 item to work; why in the world would I want to invest more money in an Apple product?  It's a good thing this was a gift.... I'm just not happy with this product and there doesn't seem to be a good explanation for this.

    I Just ran into the same issue:
    My iPod shuffle 4th gen would just stop playing, and I had to turn it off, wait 10 secs and the turn it back on.
    Then it would get stuck at the same place.
    I Even exchanged the iPod for a new one since I had just bought it.
    re-synced my playlist and same issue!
    did a restore as described above - same issue.
    Solution in my case:
    one of the songs in my playlist seems was "corrupt". Even trying to play the song in iTunes on the PC did not work, kept getting the message "This computer is not authorized ....", even though the computer is authorized.
    So somehow that song being on the shuffle crashes it.
    After I removed that song from the playlist and synced again, the problem was resolved!
    So try to play all the songs that you want to sync to your shuffle on your computer, maybe you have one song that was not downloaded properly or is otherwise corrupt.
    - Deleted the song from the local library
    - re-downloaded the song from iTunes store
    - now it was playing fine on the PC in iTunes
    - re-added it to the playlist, re-synced iPod shuffle
    all is working fine now, shuffle no longer freezes.
    hope that helps someone else....

  • Flash player won't play videos in safari after I've installed Lion does anyone have a solution?

    Hi,
    I've installed Lion after which Flash Player won't play videos with Safari. I keep being prompted to download and install the latest version of Flash Player whcih I've done several times. Can someone please help me fix this.
    I find Adobe's announcement that there are no issues with Flash Player and Lion a bit of a sick joke.
    Many thanks,
    Ian Pickering

    This sounds like the problems that Adobe have reported which are listed at
    http://kb2.adobe.com/cps/905/cpsid_90508.html#main_Flash_Player
    I only use flash for watching video clips on the BBC website so haven't been affected by these other issues. The text below is copied from the website at the above link. Hope this helps.
    The Flash Player Settings dialog box doesn't respond to mouse clicks. As a workaround, press the Tab key to move to the Close button and press the spacebar to close the dialog box. While not all settings are available, you can also use the Flash Player native control panel in System Preferences.
    Custom native mouse cursors don't animate properly on Mac OS 10.7.

Maybe you are looking for

  • To find out user who has created or deleted entries in a database table

    Hi, I have a scenario where i have many entries for t001w table and somehow a new plant is created and existing plant is deleted , Now I need to know how to find out which user on what date has done these changes to the database table. Thanks Srikant

  • Recovering catalog from a disk backup

    I've recently had a disk failure, so I need to recover all of my pictures and PSE catalog. I don't have a backup done by PSE, but I do have a comprehensive backup of everything that was on the failed disk. How do I get my PSE catalog back the way it

  • Iphone Photo's Management

    I am really struggling to work out how to remove photo's from my iphone once they are imported.  I have connected my phone and then browsed to the images on the phone... selected them and pressed the delete button.  It doesn't do anything though! Hel

  • PST Migration using PST Capture tool 2.0

    Hello, I am planning to use Microsoft PST Capture 2.0 tool to import PST's located on C: Drive of users to personal archive mailbox of the respective user in the on-premises exchange 2010 mailbox. There are total of 16000 users. I am wondering will P

  • Automatic connection to mailbox suddenly not worki...

    Please help me! I have an E71 (postpaid with Optus) and when I got the phone a few months back I set up email (it took a bit of figuring out, and now I can’t remember how!). Anyway, I have been sending, receiving and being notified of emails just fin