Flash Players Crash Due Losing Connection To The Internet Server , Why is that Happening ?

I have been trying to install these Flash Players ,but at the end of the downloading mode it loses connection to the Internet Server and crashes the install . It is very frustrating and I am giving up . Adobe Reader does the same thing , what is there to do ?  I have Windows 8 , the Internet Explorer and Chrome . Still nothing works at all .  If nothing gets straighten out here with this Flash Player and Adobe Reader by the end of the Holidays then I am going to take my computer and have it cleaned out .  Because I've had it with Flash Players and I am tired of it all .

Download the Adobe Flash Player FULL offline installer directly by clicking one of the following links.
Flash Player for ActiveX (Internet Explorer)
Flash Player Plug-in (All other browsers)
Download the Adobe Reader FULL offline installer here: http://get.adobe.com/reader/enterprise/
Those require NO internet connection to install once you've downloaded them.

Similar Messages

  • Acouple of days ago I kept losing connectivity with the internet.By resetting either my modem or Airport Extreme I could regain it for 10-30 min. when I would have to repeat the resetting.Since with Apple

    A couple of days ago I kept losing connectivity with the internet.By resetting either my modem or Airport Extreme I could regain it for 10-30 min. when I would have to repeat the resetting.Since,with Apple & Apple store support & many hours of contact with them the problem keeps recurring

    Edge has very clear restrictions, one being that you must have 6 months of clean payment history which you don't. Either wait until April 14, or good luck at Sprint.
    I am unsure how it can be determined the payment mix up was the fault of CS, but regardless, the mix up was done. There can be any number of reasons why a payment could be missed without any fault on your part, however you are still the responsible party for the account and must live with the repercussions.

  • WRT54G v4 keeps losing connection to the internet

    My WRT54G version 4 keeps losing connection to the internet. I've been on the phone w/ customer service so many times that the last time I think they gave up because after putting me on hold they never got back on the phone! :-)
    Anyway one pattern I am seeing is that the router loses connection to the internet within two or three hours after I disconnect from the Cisco VPN and shut down my work PC. Has anyone else seen something like this?
    -Frank

    I found that Linksys EasyLink Advisor is a needless program that ultimately downgrades your router from a good piece of technology to a problematic pile of junk. So, therefore, try uninstalling Linksys EasyLink Advisor to get your good, solid hardware back. All you need to do to in order to get your router to work is plug it into an outlet, plug your Internet connection into the router, and then connect your router to your computer. It should then work without software (i.e., LELA) complicating it up.
    Now, if you feel the need to set up an SSID or security, which I highly suggest, type 192.168.1.1 into your web browser. Leave the user name blank, and type admin as the password. Go to the Wireless tab and type something in as the SSID. It could be anything, just as long as it isn't linksys. Click on the Wireless Security sub-tab. Select WEP as the security mode with a WEP encryption of "64 bits 10 hex digits". Now, in Key 1, you need to type in a 10-digit password of numbers 0-9 and letters A-F (I believe). I suggest you use your phone number since that is very convenient in this instance.
    Hopefully what I suggested in the first paragraph resolves your problem. If not, I suppose you could ignore the second paragraph if you feel the need to reinstall LELA. *shudders*
    Message Edited by Pineconn on 06-24-2008 01:21 AM

  • HT4623 Has anyone had trouble installing 7.1 wirelessly on an ipad mini w/retina?  I downloaded the update, but when I attempt to install, I get an error message saying that I am not connected to the internet when I know that I am!

    It downloaded fine, but when I attempt to install it won't verify, saying that I am not connected to the internet when I know that I am!  Tried on several wifi connections while plugged into power source.  Any advice is appreciated!

    Some things to try first:
    1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    4. Go into your router security settings and change from WEP to WPA with AES.
    5.  Renew IP Address: (especially if you are drooping internet connection)
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
    http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    Fix WiFi Issue for iOS 7
    http://ipadnerds.com/fix-wifi-issue-ios-7/
    iOS 6 Wifi Problems/Fixes
    Wi-Fi Fix for iOS 6
    https://discussions.apple.com/thread/4823738?tstart=240
    How To: Workaround iPad Wi-Fi Issues
    http://www.theipadfan.com/workaround-ipad-wifi-issues/
    Another Fix For iOS 6 WiFi Problems
    http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
    Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    iPad: Issues connecting to Wi-Fi networks
    http://support.apple.com/kb/ts3304
    How to Boost Your Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h Mt
    Troubleshooting a Weak Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
    How to Fix a Poor Wi-Fi Signal on Your iPad
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
    iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Connect iPad to Wi-Fi (with troubleshooting info)
    http://thehowto.wikidot.com/wifi-connect-ipad
    10 Ways to Boost Your Wireless Signal
    http://www.pcmag.com/article2/0,2817,2372811,00.asp
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    Some Wi-Fi losses may stem from a problematic interaction between Wi-Fi and cellular data connections. Numerous users have found that turning off Cellular Data in Settings gets their Wi-Fi working again.
    You may have many apps open which can possibly cause the slowdown and possibly the loss of wifi. In iOS 4-6 double tap your Home button & at the bottom of the screen you will see the icons of all open apps. Close those you are not using by pressing on an icon until all icons wiggle - then tap the minus sign. For iOS 7 users, there’s an easy way to see which apps are open in order to close them. By double-tapping the home button on your iPhone or iPad, the new multitasking feature in iOS 7 shows full page previews of all your open apps. Simply scroll horizontally to see all your apps, and close the apps with a simple flick towards the top of the screen.
    Wi-Fi or Bluetooth settings grayed out or dim
    http://support.apple.com/kb/TS1559
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • HT1338 My software update tells me I'm not connected to the internet... if that's true how am I able to ask this question?... Can anyone tell me what's going on?

    I can't update my software because software update tells me I'm not connected to the internet... if that's true how am I able to ask this question?... Can anyone tell me what's going on and what I need to do to correct this?

    If you have a slow connection speed, update will not download.
    Are you using broadband and are you close to the modem?

  • HT5569 My mini won't allow me to log into FaceTime and I messaging it says connect to the internet but everything else that requires internet works

    My mini won't allow me to log into FaceTime and I messaging it says connect to the internet but everything else that requires internet works.. I've reconnected to the internet, reset the iPad and I've changed the password to see if any of these things would help.

    Using FaceTime http://support.apple.com/kb/ht4319
    Troubleshooting FaceTime http://support.apple.com/kb/TS3367
    The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
    http://tinyurl.com/a7odey8
    Troubleshooting FaceTime and iMessage activation
    http://support.apple.com/kb/TS4268
    iOS: FaceTime is 'Unable to verify email because it is in use'
    http://support.apple.com/kb/TS3510
    Using FaceTime and iMessage behind a firewall
    http://support.apple.com/kb/HT4245
    iOS: About Messages
    http://support.apple.com/kb/HT3529
    Set up iMessage
    http://www.apple.com/ca/ios/messages/
    iOS 6 and OS X Mountain Lion: Link your phone number and Apple ID for use with FaceTime and iMessage
    http://support.apple.com/kb/HT5538
    How to Set Up & Use iMessage on iPhone, iPad, & iPod touch with iOS
    http://osxdaily.com/2011/10/18/set-up-imessage-on-iphone-ipad-ipod-touch-with-io s-5/
    Extra FaceTime IDs
    http://tinyurl.com/k683gr4
    Troubleshooting Messages
    http://support.apple.com/kb/TS2755
    Troubleshooting iMessage Issues: Some Useful Tips You Should Try
    http://www.igeeksblog.com/troubleshooting-imessage-issues/
    Setting Up Multiple iOS Devices for iMessage and Facetime
    http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
    FaceTime and iMessage not accepting Apple ID password
    http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
    Fix Can’t Sign Into FaceTime or iMessage iOS 7
    http://ipadtutr.com/fix-login-facetime-imessage-ios-7/
    FaceTime, Game Center, Messages: Troubleshooting sign in issues
    http://support.apple.com/kb/TS3970
    Unable to use FaceTime and iMessage with my apple ID
    https://discussions.apple.com/thread/4649373?tstart=90
    How to Block Someone on FaceTime
    http://www.ehow.com/how_10033185_block-someone-facetime.html
    My Facetime Doesn't Ring
    https://discussions.apple.com/message/19087457
    Send an iMessage as a Text Message Instead with a Quick Tap & Hold
    http://osxdaily.com/2012/11/18/send-imessage-as-text-message/
    To send messages to non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
    How to Send SMS from iPad
    http://www.iskysoft.com/apple-ipad/send-sms-from-ipad.html
    You can check the status of the FaceTime/iMessage servers at this link.
    http://www.apple.com/support/systemstatus/
     Cheers, Tom

  • My phone stuck on the log in screen and the only thing apears the apple logo why is that happening?

    my phone stuck on the log in screen and the only thing apears the apple logo why is that happening?

    First try a Reset  ( No Data will be Lost )
    Press and hold the Sleep/Wake button and the Home button at the same time for at least Ten seconds... (But can take Longer)... until the Apple logo appears. Release the Buttons
    If no joy... Try a Restore...
    1: Connect the device to Your computer and open iTunes.
    2: If the device appears in iTunes, select and click Restore on the Summary pane.
    3: If the device doesn't appear in iTunes, try using the Steps in this article to force the device into Recovery Mode.
    From Here
    http://support.apple.com/kb/TS3281
    Make sure you have the Latest Version of iTunes (v11) Installed on your computer
    iTunes free download from www.itunes.com/download
    Note on Recovery Mode.
    You may need to try this More than Once... Be sure to Follow ALL the Steps...

  • AirPort Express losing connection to the internet when part of WDS

    Hi,
    I have an AirPort Extreme Baste Station (802.11n) and an AirPort Express Base Station. I have set the Express to extend the wireless signal via WDS. However, after a while the internet connection seems to drop. My computer still tells me I have full signal, and AirPort utility reports no problems, but there just isn't a connection to the internet! If I turn off the Express and then turn off AirPort on my computer, and turn it back on again, I can access the weak Extreme signal.
    This is very frustrating. I was wondering if anyone had any ideas to what the problem could be?
    Thanks very much.

    I had been experiencing the same problem -- Airport Express extending an Aiport Extreme N base station via WDS constantly dropping the connection, but still showing solid green on the LED. I'm also using the WPA/WPA2 Personal encryption scheme over the whole network, and don't want to use no encryption at all or use WEP (which is pretty much the same as no encryption at all).
    Anyway, I seem to have found a solution that works on my system at least. After I made the change outlined below, my connection has been up and running for 5 days now after losing the connection about once every 3 hours or so before that:
    1. Open the Aiport Utility, click on the AEXN base station, and click Manual Setup.
    2. Click the Advanced icon in the toolbar.
    3. Click the IPv6 tab.
    4. From the IPv6 drop-down menu, select Link-local only.
    5. Click Update.
    The AEXN base station will restart with the new settings. You may also have to unplug the Airport Express WDS remote, and plug it back in after the AEXN base station has restarted.
    You also might want to change the radio channel on both the base station and the Airport Express to use channel 11.

  • I keep losing connection to the internet

    I've had this problem for a while and I'd hoped that 10.5.1 would have fixed it but it hasn't. I was finally able to get things setup so I could at least access my network wirelessly on my 12"powerbook but now it drops connection to the internet all the time. I'll load a couple pages and then on the 3rd or 4th it hangs....spins forever and never loads the page. I have to turn off airport, turn it back on again and then reload the page. Any ideaS?

    Have you tried adding local DNS servers? This sounds a bit like the problem I had that Erik W solved by having me stop using DHCP for DNS servers and adding my ISP;s local DNS servers manually - do not know if this has been fixed in 10.5.1 or not since I'm back to my house that has wired internet
    Larry Nebel
    Message was edited by: LarryHN
    Message was edited by: LarryHN

  • Flex app can't connect to the internet / server when uploaded?

    I made a simple app that submits a data via POST using the HTTPService. My problem is, when I Run the application from the Flash Builder IDE, and it opens in the browser as a local file, it interacts with my server (remote server) without any problem and does its job well. However, when I upload it to my website, it fails to interact. It displays on the status bar of Firefox that it's connecting to the server that requires interaction but after some time the status reverts to "Done" with my Flex app not showing any Alert boxes if it either succeeded or failed.
    It's really making me frustrated not knowing what's wrong..
    Also if it would be an added help, I decided to use the Flex 3.5 SDK to make it more compatible with commonly installed Flash Players on people's computers since the features that I used doesn't really need those of 4.0.

    Contact the app developer and ask... That's an XML error on the host.

  • All of our iOS devices are displaying the message that they can't connect to the Internet.  All show good wifi connections.  Our Macs all connect to the internet just fine suggesting that the network is good.  I'm stumped.

    Airport Utility on the Macs show good internet signals but on our two iPads and my iPhone 5 there are no indications of internet connectivity.  One of the iPads is running iOS 7 but the other is still running iOS 6.  The iPhone 5 is updated to iOS 7. 
    Is there a setting switch that if set incorrectly would create this problem?  Like I said before, all the iOS devices stopped internet connectivity at the same time. 
    Update:  Well while I was typing this I was called away to help get people to bed etc.  And when I got back I tried all four iOS devices and, now, they all connect to the internet.  I don't understand it.  Two iPhones, different iOS versions, and two iPads, different generations and also different iOS versions, all decided that they would disconnect themselves from the internet but stay connected to the wifi network.  Somebody must have an explanation for what just happened.  Remember it isn't the router because the Macs all had uninterrupted internet connections.  Weird!

    I used to have a satellite connection to the internet. When ever the power went off I was told to turn on the devices in a specific order for them to work properly.
    Try shutting off every device including all iPads, iPhones, computer, Wi-Fi router and Satellite modem. Then turn them on one at a time in the order listed below. Be sure to wait until each device completes its start up routine before starting up the next item. When my satellite modem was restarted it often had to download an update. The time this took varied with the update. So be sure the Satellite modem is up and connected to the Satellite before going to the next device.
    1. Satellite Modem.
    2. Wi-Fi Router
    3. Your computer. Check to see that your computer connects to the internet.
    4. iPad or iPhone and remaining devices one at a time.

  • Cannot connect to the internet Server Essentials '12 R2 DNS issue or driver?

    OK so I have a very basic knowledge of Windows Server OS's. I have a HP Pavillion 20 Touchsmart PC that I am trying to use as a Quickbooks Point of Sale PC for a small resale business. I have Comcast Business Class internet. I downloaded the evaluation
    version of Windows Server 2012 Essentials R2. I want to use it because it is my understanding that it is far more secure then Windows 7 Pro. I went through the server install and entered the information for the business at first startup and that's it. I did
    not change any other settings. I have the computer direct connected via Ethernet cable to the router and it will not connect to the internet. I already tried connecting it directly to the modem to see if maybe the router was the issue but it is getting the
    same error. I have my other computer running Windows 8.0 connected to the router via WiFi and it is working fine. I disconnected the WiFi on my computer and plugged in the cable directly to the laptop and was able to connect to the internet. So did some research
    on the web and it stated that if under command prompt the IP address started with 192.168.x.x then the computer is assigning the ip address and not the router and that meant it is an issue with the computer not the internet connection. I figured that seeing
    as how my laptop is using that internet connection right now, that the internet connection is fine. I was also told it could be a issue with the drivers so i went and tried numerous drivers from different sites (no 3rd party though) ie. HP and Atheros. I also
    used a widely popular software called "Driver Pack Solution 13" and it had several drivers that it updated including the WiFi. I am not going to be using the WiFi to connect to the web so that is a non issue the fact that it is not even showing networks
    in the area. I need direct connect to be working however. When I run the Network Diagnostic tool it says "Your DNS server might be unavailable". But it obviously sees the DNS because under the ipconfig settings it is showing "wp.comcast.net".
    I don't have any other options here I know that there are some settings in the OS that may need to be changed. I have to have this up and running by tomorrow. If there are any Server Guru's out there PLEASE HELP!!! Thank you!

    My guess is that your router is not handling DNS forwarding correctly.
    Can you do an IPCONFIG /ALL from a command prompt and post the response?
    Also, go into PowerShell and enter the following:
    Get-ItemProperty -path hklm:\system\CurrentControlSet\services\dns\parameters
    Post the response.
    Robert Pearman SBS MVP
    itauthority.co.uk |
    Title(Required)
    Facebook |
    Twitter |
    Linked in |
    Google+

  • My ipad wont connect to the internet server, help please!

    My ipad suddenly wouldn't connect to the internet so I turned it off and on, checked the settings, there wasn't anything wrong and I could connect to my wifi from my phone in the same location. So I pressed reset and delete all data and settings. Now it wont reset and a message comes up that says "your ipad could not be activated because the activation server cannot be reached:. Try connecting your ipad to itunes to activate it or try again in a couple of minutes." I cant connect to itunes because I cant get past this page in the reconfiguring process. Trying again and again will not work. Can anyone help?
    Thanks.

    By reseting and deleting all data and settings, you wiped your iPad clean of anything that was "yours". Put your iPad into recovery mode and restore from iTunes. Hopefully you have a backup there to recover all your data.
    Recovery Mode
    Backup & Restore
    Restore iOS

  • Why can't I connect to the internet?  It says that I'm connected, but then I get messages that my iPad isn't connected to the internet.

    I've tried the troubleshooting things that I've seen, but it still doesn't work.  The wifi notification on top says that I'm connected, but I can't get to any websites.
    Help!! 

    The wifi symbol only indicates the presence of a wifi signal, not that you are connected.
    Some things to try first:
    1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    4. Go into your router security settings and change from WEP to WPA with AES.
    5.  Renew IP Address: (especially if you are droping internet connection)
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
    http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    iOS 6 Wifi Problems/Fixes
    Wi-Fi Fix for iOS 6
    https://discussions.apple.com/thread/4823738?tstart=240
    How To: Workaround iPad Wi-Fi Issues
    http://www.theipadfan.com/workaround-ipad-wifi-issues/
    Another Fix For iOS 6 WiFi Problems
    http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
    Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    How to Boost Your Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
    Troubleshooting a Weak Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
    How to Fix a Poor Wi-Fi Signal on Your iPad
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
    iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Connect iPad to Wi-Fi (with troubleshooting info)
    http://thehowto.wikidot.com/wifi-connect-ipad
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    Wi-Fi or Bluetooth settings grayed out or dim
    http://support.apple.com/kb/TS1559
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • Because I want to check my location after they said Actions will take effect when this iphone connects to the internet I dont understand what happen

    because I want to check my location after they said Actions will take effect when this iphone connects to the internet I dont understand what happen

    One post is enough, no need to create 3 threads on the same subject.

Maybe you are looking for

  • Looking for a simple photo gallery web server setup

    Hi, I have Arch running on my low powered AMD HP microserver and am looking at letting relatives,friends etc see my photos over the web. I have php and sqlite3 already installed and dyndns setup. What further would I need (I'm looking for as painless

  • When firefox crashes I lose all of my pinned sites.

    When Firefox crashes or freezes and has to be closed, I lose all of my pinned sites. Why are these saved somewhere?

  • Message type to print in MIRO

    Hello guys, my problem is this: I must parametrize the output message in MIRO to print the invoice but when I run MIRO and I select from menu the voice 'Go to'> 'Message'>'Header and I insert the output type(message,for example MLPP) the system gives

  • BPELConsole: Initiate does not show HTML or XML form to fill in variables

    Hi, i am using a xsd with a cascaded import of other xsds. If i use one import layer everything is fine. But if i use something like: 1.xsd (imports 2.xsd) 2.xsd (imports 3.xsd) The BPELConsole refuses to show me a HTML or XML form where i can fill i

  • Correcting pixel aspect ratio with Publish settings

    Same old, I know. I'm designing and producing a Flash site using a Mac, but it will be viewed on a large touchscreen (1366x768) driven by a PC. The vectors look fine when going from the Mac 1.1 pixel aspect ratio to the Windows 1.0 display, but the p