Flash plugin plays for 2 to 10 secs then pauses and cannot resume

new website, pauses every 2 secs, you tube seems to last for 10 secs then pauses.
Flash Version 11.3.300.271
Firefox 14.0.1
This is getting old, either firefox fix this issue or give us other video options without flash and let adobe die!

I copied and pasted the same version. I only have one versin installed

Similar Messages

Everytime I attempt to use Facebook's Flash Bulk uploader my Adobe Flash Plugin crashes. It does this on Firefox, Chrome and IE9 All of which are up to date. What is the issue here?

Ive restored any changes my Anti-virus has made...
Ive uninstalled and reinstalled flash, firefox etc.
My flash plugin works for everything else...

I have the same problem on Firefox 29.0.1 on flash NPSWF32_13_0_0_214 (running windows 7, 64 bit)..
Many pages I go to (cnn.com for example) stops responding then a couple of seconds later I get a popup that says , if I click continue a couple of times it finally starts responding! Just started a couple of weeks ago! (Have tried turning off hardware-exceleration for flash, but doesn't seem to have an effect

TS1365 MacBook Pro (15-inch, Late 2011) It turns on for less than 60 sec thens shutsoff by itself, it won't load to recovery hd partition, won't load to mac OS already replaced MLB, problem still persist.. please help thanks in advance

MacBook Pro (15-inch, Late 2011) It turns on for less than 60 sec thens shutsoff by itself, it won't load to recovery hd partition, won't load to mac OS and already replaced with new MLB, but the problem still persist.. able to run ASD EFI but ASD OS wont work.please help thanks in advance

Holy crap, I got it to work.
Essentially, I just waited until DiskWarrior reached Step 9 and told it to skip the step before it had a chance to freeze. It skipped successfully, moved on, rebuilt and replaced the faulty directory files.
So far the computer is booting like normal, I can log in, and I'm currently copying all of the data to an external as I type this.
I still have no idea why the computer wouldn't mount or boot to any drive, but I guess I'll deal with that later.

I just bought music on my iTunes account and the files did not download completely. The songs play for a minute or so then skips to next song.

I just bought music on my iTunes account and the files did not download completely. The songs play for a minute or so then skips to next song

If you live in a Region that allows re-downloading Music... Delete the Song and re-download it...
Download Past Purchases
http://support.apple.com/kb/HT2519
If not... Contact iTunes Customer Service
Apple Support iTunes Store Contact Us

Hitting the space bar the track would only play for about one second. Then it stops.

I'm new to Soundbooth and have already a serious problem. Hitting the space bar the track would only play for about one second. Then it stops. I don't know what to do. I have the Production Suite CS5. All other applications run well.

i have the exact problem in my computer lab running macpro on 10.6.8 using CS5... this is happening in every ADOBE CS5 software using sound : soundbooth, AEX, premier pro. this is totaly ridiculous, nothing like that is happening in the other software (finalcut, finalcut xpress, audacity, soundtrack pro all are working fine) ...
i find the lack of help & replies very weird in this forum...

TS1718 Is anyone else experiencing trouble playing video in itunes? Video intermittenly pause and plays without audio? Video used to play fine this problem only started since the last version of itunes, version 7. Just updated to v. 11 still having sam

Is anyone else experiencing trouble playing video in itunes? Video intermittenly pauses and also plays with not audio. Video used to play fine. This problem only started since I upgraded to version 7. I have not used itunes since then because I couldn't watch anything without experiencing these problems. I was waiting for the next version to come out and hoped it would fix the problems I was having, but no such luck. I just upgraded to the latest version, version 11 and I'm still having the same problems. Anyone else having these same issues and if so, any solutions?

Is anyone else experiencing trouble playing video in itunes? Video intermittenly pauses and also plays with not audio. Video used to play fine. This problem only started since I upgraded to version 7. I have not used itunes since then because I couldn't watch anything without experiencing these problems. I was waiting for the next version to come out and hoped it would fix the problems I was having, but no such luck. I just upgraded to the latest version, version 11 and I'm still having the same problems. Anyone else having these same issues and if so, any solutions?

When I go to Preview to view a photo it shows up for less than a second then disappears and just leaves a gray box where the photo should be. iMac (Retina 5K, 27-inch, Late 2014). I need Preview for work.

After the OS X Yosemite 10.10.3 update When I go to use Preview to view a photo it shows up for less than a second then disappears and just leaves a gray box where the photo should be. iMac (Retina 5K, 27-inch, Late 2014). I need Preview for work.

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
The test works on OS X 10.7 ("Lion") and later. I don't recommend running it on older versions of OS X. It will do no harm, but it won't do much good either.
Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of it have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message. See, for example, this discussion.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a general summary of what you need to do, if you choose to proceed:
☞ Copy a particular line of text to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
These are not specific instructions; just an overview. The details are in parts 7 and 8 of this comment. The sequence is: copy, paste, wait, paste again. You don't need to copy a second time.
5. Try to test under conditions that reproduce the problem, as far as possible. For example, if the computer is sometimes, but not always, slow, run the test during a slowdown.
You may have started up in "safe" mode. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. Load this linked web page (on the website "Pastebin.") The title of the page is "Diagnostic Test." Below the title is a text box headed by three small icons. The one on the right represents a clipboard. Click that icon to select the text, then copy it to the Clipboard on your computer by pressing the key combination command-C.
If the text doesn't highlight when you click the icon, select it by triple-clicking anywhere inside the box. Don't select the whole page, just the text in the box.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Click anywhere in the Terminal window to activate it. Paste from the Clipboard into the window by pressing command-V, then press return. The text you pasted should vanish immediately.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. If you don't know the password, or if you prefer not to enter it, just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, a series of lines will appear in the Terminal window like this:
[Process started]
        Part 1 of 8 done at … sec
        Part 8 of 8 done at … sec
        The test results are on the Clipboard.
        Please close this window.
[Process completed]
The intervals between parts won't be exactly equal, but they give a rough indication of progress. The total number of parts may be different from what's shown here.
Wait for the final message "Process completed" to appear. If you don't see it within about ten minutes, the test probably won't complete in a reasonable time. In that case, press the key combination control-C or command-period to stop it and go to the next step. You'll have incomplete results, but still something.
12. When the test is complete, or if you stopped it because it was taking too long, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak for themselves, not for me. The test itself is harmless, but whatever else you're told to do may not be. For others who choose to run it, I don't recommend that you post the test results on this website unless I asked you to.
Copyright © 2014, 2015 by Linc Davis. As the sole author of this work (including the referenced "Diagnostic Test"), I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

HT201272 I bought a dictionary for $29.99 on 30.11.11 and cannot redownload it. I was under the impression that when an app is purchased it belongs to you, but this is not the case with this item. It is an important app for me and I would like to get it b

I bought a dictionary for $29.99 on 30.11.11 and cannot redownload it. I was under the impression that once an app is purchased it belongs to you for all time. Shouldn't I be able to get this app.?

You can only redownload apps whilst they remain in your country's store - is it still listed fot sale ? If the app is still in your country's store then you should be able to redownload it via the Purchased tab in the App Store app on your iPad, if it's not shown there (but is still in the store) then check to see if it's hidden from the Purchased tab : http://support.apple.com/kb/HT4919
If it's no longer in your store then do you have a copy of it on your computer's iTunes and/or on your backup of your downloads that you can use to resync it to your iPad ?

I want to have different headers in Pages. I want to be able to set them and not have them be the same. For example I want ii then iii and so on...How do I do that?

I want to have different headers in Pages. I want to be able to set them and not have them be the same. For example I want ii then iii and so on...How do I do that?

Hi BelleDesign,
"Headers" is short for "Continuing Headers."
Use a Header when you want recurring information on a series of pages in your document.
If ii, iii, etc. are page numbers, you can place them in Headers using Insert > Page Number, then formatting the page number to lower case Roman numerals.
For more on Headers and Footers, see Chapter 3, Working with document parts in the Pages '09 User Guide, available for download via the Help menu in Pages. Discussion of Headers and Footers starts on Page 54.
Regards,
Barry

TS3297 I bought an album, two of the twelve songs play about half the way through, then stop, and then the next song in line starts playing. How do I get the songs downloaded so they play to the end?

I bought an album, two of the twelve songs play about half the way through, then stop, and then the next song in line starts playing. How do I get the songs downloaded so they play to the end?

Welcome to the Apple Community.
Try deleting the problematic file (electing to remove original file if/when prompted) and then re-downloading the file from the iTunes store.
You can re-download content purchased from the iTunes store (availability varies depending on location) using the purchased option from the Quick Links section in the top right corner of the iTunes homepage in your iTunes application on your computer.
You can re-download content purchased from the iTunes store (availability varies depending on location) using the purchased option at the bottom of the screen of the iTunes app (or video app) on your iOS device.
If the problem re-occurs, select the content which is causing a problem and use the 'Report a problem' button in Your Purchase History using your computer.

Flash plugin installation for Firefox browser

I have a very simple question:
I am running Linux, and I use the latest Firefox browser.
From this site (Adobe) I downloaded the flash plugin
"flash-plugin-9.0.124.0-release.i386.rpm". Then I installed the
package with the "rpm -Uvh ... " command (as superuser of course).
It appeared that the installation succeeded. Afterwards, the
command "rpm -q flash-plugin" shows that it is installed. However,
Firefox still does not see the plash player. What else do I need to
do? Can anybody help?
Thanks for your suggestions.

try this
First, close running Firefox.
Open the terminal (shell prompt)
Install Flash Player
Type the following command to install :
$ sudo apt-get install flashplugin-nonfree
Some people might find voice is not working with newly
installed flash player.
Type following commands to solve this problem
$ sudo apt-get install alsa-oss
$ gksudo gedit /etc/firefox/firefoxrc
Find line that read as FIREFOX_DSP and set to :
FIREFOX_DSP="aoss"
Save and close the file.
Close Firefox and restart it again.

Way to Upgrade Memory for Flash Plugin (v11) for Firefox (v10)?

Hello!
I've been searching far and wide for an answer to this to no avail, so I'm hoping someone here can help me. As a part of my position at work, I am trying to work with a web-based Flash application connected to a Java back-end server. The data being rendered on the Flash side is very large and expansive, with many containers/layers involved. Since the processing seems to stall, then eventually crash the Flash Plugin in Firefox, is there any way to bump up the memory assigned to the Flash Plugin from within Firefox? I did see that the memory allocation is controlled by the browser, not the Flash Plugin, but I have been unable to find any place that describes how to accomplish this memory adjustment within firefox for flash plugin at all.
Thanks, in advance, for your help!
--Michael

Hi Michael,
Not that I know of but I'll forward this along to one of our Mozilla / Linux experts. Have you posted over on the Mozilla forums to see if anyone there can help?
http://forums.mozillazine.org/
Chris

Ipod 6th generation plays for about 20 sec then pauses by itself...ideas?

I have a 6th generation ipod nano. I plug it in via headphone jack, select a song, and it plays for 20 sec or so, then automatically pauses. Have tried different songs and have tried going to settings and resetting settings. Have also tried holding the power button and shutting down, then restarting. Upon restarting, I do not get the normal apple logo, it just goes back to the song that was paused. When I hit play, it plays for another 20 sec or so then pauses again. Any ideas?

This is usually an indication that your iPod's headphones are not plugged all the way in. The white part of the headset should be flush with the body of the Nano and no silver from the plug should still be seen.
B-rock

All videos on all websites inaccessible - flash plugin crashes for every video

I am unable to play any videos through firefox. I have tried redownloading the adobe flash plugin, and I have the latest version of firefox. Reloading the page does not work. I have tested videos on youtube, several blogs, websites such as geekosystem and cracked and am unable to access any.

Try running Firefox in [[Safe Mode]]. If it functions properly in that configuration, then one of your add-ons is the culprit.

Event.deactivate is not firing with flash plugin 10,2,152,26 embeded in IE 8 and above

I am working on a portal which is built in flex. I wanted to perform some action based on my applications is in focus or out of focus. So I tried to use two Events for this purpose Event.Activate and Event.Deactivate inside my flex code.
These events fire perfectly in FF 3.0 and above, Safari, Chrome and these events get triggered till IE 7.
But when I switch to IE 8 and above versions with latest flash player plugin 10,2,152,26 the Event.deactivate is not firing, and I am not able to detect whether my Flex application is out of focus.
I tried doing some research around this issue both using Flex Events and Javascript approach using window.onfocusin and window.onfocusout, but still no luck in IE 8 and higher versions with latest Flash plugin 10,2,152,26.
Has someone faced this kind of issue. Any help or solution to this problem would be appreciated. As we have a large number of users viewing this portal in IE 8 with latest flash plugin.
The code is simple and I have pasted below:
package {
import flash.display.*;
import flash.utils.*;
import flash.events.*;
public class Main extends Sprite {
    public function Main() {
      this.addEventListener(Event.ACTIVATE, activateListener);
      this.addEventListener(Event.DEACTIVATE, deactivateListener);

this is a known issue (or, really a collection of issues) related to how the deactivate event works in different browsers. check colin moock's blog.
for most, but not all, purposes using a mouseleave event works well-enough.

Flash plugin plays for 2 to 10 secs then pauses and cannot resume

Similar Messages

Maybe you are looking for