Flash Pro CS6 can't see a font Flash Pro CS5.5 CAN?

I just downloaded and installed the trial for Flash Pro CS6 so that I can use native extensions when exporting to iOS.  When I open my project, the "Font Mapping" pannel opens up and complains that "the document contains one or more fonts currently not available on your system".  The font is installed.  When I open the project in CS5.5 there is no issue.
I have tried delete to the fontlist.txt in the configuration folder but that didn't work ...
Any ideas?

Hi,
Could you try and recreate the whole of your preferences folder (and not only your fontlist.txt file) to see if it makes any difference?
Here's how you do it:
1. Launch apps
2. Press Ctrl + Shift + Alt immediately before launching the first screen
3. Pop up would appear to delete the prefrences
4. Select  yes  from pop up
5. launch again.
Regards,
Suhas Yogin

Similar Messages

  • My tab under inspector disappeared, I can't see my font size or paragraph spacing anymore. How do I get my tab back?

    On pages, my tab under inspector disappeared, I can't see my font size or paragraph spacing anymore. How do I get my tab back?

    The Inspector Icon does not have a "tab", it is just a shortcut button.
    Menu > View > Show Inspector
    command option i does the same thing showing and hiding the Inspector.
    Because the Inspector/s are movable windows, if you can't see them they maybe somewhere off your screen or half tucked away partially out of sight.
    Peter

  • HT203477 PLEASE HELP I CAN HEAR SOUND BUT CAN'T SEE VIDEO(final cut pro x)what gonna on?

    PLEASE HELP I CAN HEAR SOUND BUT CAN'T SEE VIDEO(final cut pro x)what gonna on?os x lion 10.7.4(11e53)

    What's the video exactly? Open into the QT player and report what it says in the movie inspector or post a screen shot.

  • Hi, I have a problem with fonts because in the window I can't see the font, they are transparent. how can I fix this?

    Hi, I have a problem with fonts because in the window I can't see the font, they are transparent. how can I fix this?

    giadad,
    It sounds as this issue:
    Open System Preferences and go to Accessibility. Next, select Display from the source list along the left, then check the box labelled Reduce transparency.
    It was first presented in this post #15 by TheUlser:
    https://forums.adobe.com/message/6854594#6854594
    It has been described on this Adobe page:
    http://capitalmacservice.com/font-preview-working-illustrator-cs-5-yosemite-fix/

  • I can't see the font names in the TYPE - Font pull down menu?

    I can't see the font names in the TYPE - Font pull down menu?  The fonts are in there, but I can only see the name as I scroll past each one - almost like they are white text???

    view,
    I believe this may solve it:
    Open System Preferences and go to Accessibility. Next, select Display from the source list along the left, then check the box labelled Reduce transparency.
    It was first presented in this post #15 by TheUlser:
    https://forums.adobe.com/message/6854594#6854594
    It has been described on this Adobe page:
    http://capitalmacservice.com/font-preview-working-illustrator-cs-5-yosemite-fix/
    It may also depend on the monitor, as it appears from post #29 by Loncar in the same thread.
    Obviously, this also influences some other things so there may be a downside to it.

  • My wife uploaded new fonts to her macbook and now can not see any writing on her screen, can I fix this?

    Hi, my wife uploaded new fonts to her macbook and now can not see any writing on her screen, can I fix this?
    System fonts deleted accidentally. Does anyone know how I can fix this please?

    Thanks Mike,
    Absolutely right. I restarted in Safe Mode. This enabled me to see the actual text on the screen. Then I backed up. Then reinstalled. All fixed.
    Thanks again,
    Chris

  • How can I see Bangla font in my firefox?

    I am using Firefox Setup 16.0b2 when I install avrokeyboard_5.1.0 Then I can't see Bangla font now I am suffering an unwanted problem please help me so that I will see Bangla font easily.

    Does '''avrokeyboard_5.1.0''' install an extension in Firefox?
    Do you have that problem with the current release version - Firefox 15.0.1?

  • Hi folks, you might know how to fix this: my wifi shows (no hardware installed) then I went to system preferences and deleted the wifi connection, I went also to system information and I can not see wifi listed on Network, how can I create a new wifi ?

    Hi folks, you might know how to fix this: my wifi shows (no hardware installed) then I went to system preferences and deleted the wifi connection, I went also to system information and I can not see wifi listed on Network, how can I create a new wifi or simply solve this, I have tryied shotdown pressing keys like P and R, option, etc. Please help me .

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
    Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output on certain models. The next normal startup may also be somewhat slow.
    The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

  • When I turn on messages, I can't see my messages.  All I can see is a screen with horizontal lines and a text list of addresses.  How can I get the regular message screen back?

    When I turn on Messages, I can't see my messages.  All I can see is a screen with horizontal lines.  How can I get the regular Messages screen back?

    The same is happening for me. Today I decided to reboot my PC because it was acting up a bit, go figure, and then for some reason at the same time the PC was restarting my macbook froze. I had to do a reboot with the restart button but then all that came up was a gray background and in the middle of the screen was a darker gray folder with a white question mark in the middle of it, blinking. I can't imagine why the restart would've affected my macbook. After finding information on how to fix this, I tried all of the steps that were given about using the mac OS X disk to use the first aid utility to fix it. When using the Disk Utility option whenever I select my hardrive and am in the First Aid tab, the only button I can use is the Verify Disk Permissions. The other three buttons, and namely the most important Repair Disk button, is/are not selectable (grayed out). I then tried resetting the PRAM the way they also said with the command + option + P + R and waited for the second startup sound. After that I gave the Disk Utility a second try, but still nothing. And now if I try to just reinstall the OS completely I can't even select a destination volume on the third step (Select Destination). Apparently this means i'm SOL.

  • Can't see the other person, but they can see me. A...

    i was wondering if it is possible, this person i believe uses a Android or Iphone, for the camera to be turned off for video chat? I can never see the other person but they can see me - and i can see myself during the video chat. My video which they see i also see takes up the whole screen. This issue also is the same for when i use Windows and video chat with this person.

    Hello pfierrobb:
                You have to enable it in SKYPE.  Open up Sykpe click on tools then select options . When that windows opens select video settings. Then you well see select webcam click on White box select your web cam choices. Windos 7 HP computers it is called HP web camra filter. I just close out the filter stuff if I am not using it during chat session. Some HP computers call it cybrlink web cam.  If your web cam isn't listed yet the web cam still works in other applications your Skype software might be corrupted. Just uninstall Sykpe and reinstated it back with a new copy download  http://www.skype.com/en/download-skype/skype-for-computer/   If you are still having issues please let us know. Thank you frrw. 

  • HT4559 i have a new ipad 3rd G and i can't see the facetime application, but i can see the icon in the sitting notification

    i have a new ipad 3rd G and i can't see the facetime application, but i can see the icon in the sitting>notification
    how can i work with the facetime app??? plz reply me

    FaceTime is not available in KSA or UAE.
    See this -> http://support.apple.com/kb/HT1937

  • Can I see iPhone cam in iPad screen, can I sencronize Real time . Tanks

    Can I see iPhone cam in iPad screen, can I sencronize Real time . Tanks
    İ am medikal doktor and I use a medical equipment that can use iPhone cam and I need to Show this video Real time to my parents by iPad screen
    I hope you can understand

    Google facetime

  • The caption on an annotation is off the plot area. Even if I cahnge the x and y scaling I still can't see the annotation caption. How can I change it so that I can see it?

    The caption on an annotation is off the plot area. Even if I cahnge the x and y scaling I still can't see the annotation caption. How can I change it so that I can see it?

    Try calling SetCoordinates on the annotation's Caption property. This method lets you explicitly set the x and y coordinates of the caption.
    - Elton

  • HT204053 I have installed the latest version of Apple but still can't see ICloud in System Preferences- how can I fix this?

    I have installed the latest version of Apple but still can't see ICloud in System Preferences- how can I fix this?

    Lion is required to see the iCloud Preference Pane: this is an upgrade, not an update, and has to be paid for. If you want to install Lion, go to the Mac App Store and purchase and download it there ($29.99).
    First check that your Mac meets the requirements for Lion:
    Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7, or Xeon processor
    2GB of memory
    OS X v10.6.6 or later (v10.6.8 recommended)
    7GB of available space

  • The new itunes is slow and I can not see my musics anymore. How can I have my musics listed like they were before?

    The new itunes is slow and I can not see my musics anymore. How can I have my musics listed like they were before?

    I have the same problem with new 11.0. Presentation of album data now seems scrambled in 'Album' screen. Instead of albums in alphabetical order with all album tracks I now get albums in the order of the Album Artist. Unless the album artist is EXACTLY the same, the tracks on any one album can be spread all over the screen (hopeless for compilations). Does anbody know how to get the Album screen to sort solely on the Album title?

Maybe you are looking for

  • Installing a new CPU

    I have a km2m combo motherboard that supposedly supports a XP 2400 CPU. I'm trying o install, but it wont even power up, and when I try putting the old cpu back in it boots for about 15 seconds and then shuts off. Please Help

  • How do I submit to procedure with a variable number of controls in portlet?

    I need to submit to a stored procedure but my portlet has a variable number of controls. How do I do this? In the past I have always had an input parameter for each control. In this case the number of controls vary at runtime. Is there a way to submi

  • Reporting on between values

    Hello, I am trying to create a report that reports on all contacts that have a post code between 3000 - 3005 but the list goes on to include about another 100 values 3008 - 3015 ect. I have tried to create a report using the between function and copi

  • Help, cannot set references to Photoshop.Application in VBA

    Hello, I have used CS5 in the past and have had a well-functioning VBA program (running within Access 2010) that ran fine, opens 32-bit Photoshop, and controlled photoshop CS5 normally, allowing me to manipulate photos, read metadata, etc.  (It was m

  • How do I integrate Photoshop Elements 12 with 8?

    Recently purchased an upgrade on adobe photoshop elements from  V8 to V12.  downloaded to computer and now I have two on the ?computer, both V8 and V 12 .  How do I integrate these two