Flash pro css3 update from f8

Hi,
I'd like to install flash pro cs3 pro on my new Windows 8 pc.
I have a flash8 licence and cd-rom. The F8 installation on the new pc is ok.
But how can I download the cs3 update that I bought and for rwhich I have the licence.
Thank you.
Best regards.
jm
PS:
- I didn't see cs3 update from f8 on Adobe download page.
- I should have the same problem -may be- to get CS3 to CS5 update that I bought too !

Manually update Creative Suite 6 products
Go to the Adobe.com Product updates site and choose the update you want to download.
When the download completes, start the update by double-clicking the Set-up.exe (Windows)
Prompted to shut down conflicting applications, do the following:
Windows
Right-click the taskbar and select Task Manager.
Select the Processes tab, select a conflicting process, and click End Process.
Repeat for any additional conflicting processes.
Check to see if the update downloaded successfully.
\Users\[username]\Local\AppData\Adobe\AAMUpdater\1.0\
Sarika

Similar Messages

Flash Pro CS6 Update menu greyed out + AAM fail,supressed by the Admin - Win7-64

Hi,
I want to update Flash Pro Cs6 (PC Win7 64bit) to Update2.
However, the menu Help>Updates is greyed out.
The Update2 AMM patch installer says "updates could not be applied. Contact your system Admin. Updates have been suppressed by the Admin"
before starting.
This seems to point towards a privilege issue but, I have tried to :
run Flash as admin, run the updater as admin, install flash logged in as admin and updater logged in as admin,
without any luck....
This is the install log summary:
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 0 error(s), 4 warning(s)
WARNING: DS013: Payload {7EABC54B-02C3-4DA1-9EB4-974CE7414066} AdobeHelp 3.4.0.0 is already installed and the session payload {D38116C8-C472-4BB0-AD6F-0C1DD1320D1D} AdobeHelp 4.0.0.0 has no upgrade/conflict relationship with it.
WARNING: DS013: Payload {1A1E5FF9-D0FD-42A3-8E18-E5E7E95E1AB4} DynamiclinkSupport 5.5.0.0 is already installed and the session payload {DE88AA40-6766-43D3-A755-8FC374B3D2C3} DynamiclinkSupport 6.0.0.0 has no upgrade/conflict relationship with it.
WARNING: DS013: Payload {A8798E04-96FF-4564-9157-0D4C89CB794C} DynamiclinkSupport 5.0.0.0 is already installed and the session payload {DE88AA40-6766-43D3-A755-8FC374B3D2C3} DynamiclinkSupport 6.0.0.0 has no upgrade/conflict relationship with it.
WARNING: DS013: Checking payloads upgrade/conflict relationships : Failed with code 1
Cheers,
F.
PS :
sorry for cross post from this :http://forums.adobe.com/message/4793645#4793645
Just noticed this was the dedicated forum for install issues.

Manually update Creative Suite 6 products
Go to the Adobe.com Product updates site and choose the update you want to download.
When the download completes, start the update by double-clicking the Set-up.exe (Windows)
Prompted to shut down conflicting applications, do the following:
Windows
Right-click the taskbar and select Task Manager.
Select the Processes tab, select a conflicting process, and click End Process.
Repeat for any additional conflicting processes.
Check to see if the update downloaded successfully.
\Users\[username]\Local\AppData\Adobe\AAMUpdater\1.0\
Sarika

Office 365 Pro Plus - updates from the internet

Hi All
I've used the Office deployment toolkit to download Office 365 Pro Plus to a local file server, and have now packaged this up within SCCM 2012 for deployment to clients.
In my configuration.xml file i have the following set for updates
<Updates Enabled="TRUE" />
I understand that this setting allows for updates, and client will download them from the internet.
Is this correct?
I am concerned that the Office 365 source files i downloaded are a few months old now, so will be out of date and i am relying very much on my deployed clients to be downloading updates as expected. Do i need to do anything else?
Thanks

<Updates Enabled="TRUE" />
I understand that this setting allows for updates, and client will download them from the internet.
Is this correct?
That's correct, with Updates element configured as "TRUE", the Click-to-Run update system will check for updates from the CDN server automatically. So with this configuration, you will always be up-to-date:
http://technet.microsoft.com/en-us/library/jj219426.aspx#BKMK_UpdatesElement
Deploying with an old build should be no problem here, but why not re-download a newer build with ODT (Office Deployment Tool). That should not take too much time and will definitely reduce the network bandwidth consumption when Office 365 updates itself
from each client after the deployment...
Regards,
Ethan Hua
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Flash Pro CS6 Updates fail, supressed by the Admin - Win7-64

Hi,
want to update Flash Pro Cs6 (PC Win7 64bit) to Update2.
The menu Help>Updates is greyed out.
The Update2 patch installer says "updates could not be applied. Contact your system Admin. Updates have been suppressed by the Admin"
before starting.
This seems to point towards a privilege issue but, I have tried to :
run Flash as admin, run the updater as admin, install flash logged in as admin and updater logged in as admin,
without any luck....
Cheers,
F.

Manually update Creative Suite 6 products
Go to the Adobe.com Product updates site and choose the update you want to download.
When the download completes, start the update by double-clicking the Set-up.exe (Windows)
Prompted to shut down conflicting applications, do the following:
Windows
Right-click the taskbar and select Task Manager.
Select the Processes tab, select a conflicting process, and click End Process.
Repeat for any additional conflicting processes.
Check to see if the update downloaded successfully.
\Users\[username]\Local\AppData\Adobe\AAMUpdater\1.0\
Sarika

Importing Flash Pro library symbols from Starling class

Very new to Starling. I have succesfully created a project and seen some great performance when scrolling the pages in the online comicbook I'm making.
However, I need to place interactive, invisible hotspots on top of my comicbook pages. Placing these hotspots via code would be quite cumbersome - it would be much better to design these interactive layers in Flash Pro so I can drag/drop their exact placement. The structure I want is:
NORMAL STAGE LAYER -> Interactive hotspots
on top of
STAGE3D LAYER -> Comicbook pages
I'm aware that the hotspot layers won't run on the GPU, only the pages underneath. But I'd like to try it out anyway.
However, once I've created the hotspot layers in Flash Pro and given them linkage names, I can't figure out how to import them onto the comicbook pages. This is obviously because they are flash.display.movieclips and the Starling class that tries to import them expects Starling movieclips.
Is there any workaround for this? Either a way to be able to refer to both types of movieclips from the same class (preferably) - or a way to create two classes that add the pages and the hotspots respectively. Code examples would be great.

Have you perhaps considered using this:
starling.core.Starling - Native Overlay
Not that I'd do that myself. I know we all want our cake and eat it too but I really think you should work within the framework and re-create the hotspots using Starling sprites and add listeners to them. You can read the original flash hitareas x/y position as well as height and width. If it's just rectangles, that's all you need to know to generate the hit area in Starling. Even if it's not just rectangles you can draw the Flash hitarea object (assuming it's a flash symbol) into a Starling object as you're most likely doing with the comic book pages themselves. You just need to apply listeners.

Lost QT Pro in update from 7.x to 7.1.5!!

I updated from QT Pro 7.x (I think it was 7.1.3) to 7.1.5, and now I only have QT player!!! How do I find my key?

Registered To: Apple Pro Apps User
Organization: [ blank ]
Registration Code: Automatic
Below the text fields is the text "Quicktime 7 Pro".
If I enter anything in the fields, the "Quicktime Pro" sign disappears and a button appears saying "Buy Quicktime Pro".
None of the Pro functionality works anymore. Is there any way to go back to 7.1.3 so I can have Pro back?

X58 Pro BIOS update from 7.3 to 8.x

Hi.
I've thought of updating my the bios of my X58 PRO but I've hesitated as I'm not sure if the new 8.x bios versions are meant for my mb. 8.e is the latest I think.
I was wondering if anyone on the forum had any experience on the subject? I saw one old thread with someone thinking the same thing but wasn't quite sure how it worked out for him.

Well atm I'm having problems with my DVD-drive giving me DMA errors whenever I'm trying to burn a DVD. I've looked into the matter and nothing seems to be helping so I thought of updating the BIOS.
Even though a BIOS update might not help with my current problem, I'm still interested to know whether it is possible to update BIOS from 7.3 to 8.e.
I read from somewhere that this was not adviced because 8.x versions are meant for X58 PRO SLI
MSI automatic updating also didn't even suggest any updates for my BIOS. I know not to flash from MSI LiveUpdate, I just ran it to check for updates.

Final Cut Pro X update from expired trial version

Just bought Final Cut Pro X cannot open it
I have an expired trial version from 2012-13.
How do I move forward?

Delete the trial version

I purchased adobe flash pro cs5.5 from a distribution center in Utah with "Only for dist. in Asia Pa

Why does the box have an "Only for distribution in Asia Pacific and Japan" sticker on the side if I purchased it from a distribution center in Utah? Can I still use it? What are the differences?

Would it be possible for you to post your solution to the problem here?
I am having the same problem with CS5.5
Thanks;
Zach

Compile SWF version 14 (Air 3.1) from Flash Pro CS55 possible?

Dear Adobe community,
Has anyone been able to take an existing FLA file in Flash Pro CS55 and 'publish' an swf file as version 14 (Air 3.1)? I'm trying to use a native extension for iOS on GitHub, but my app has been on Flash Pro and hence have been publishing, then using ADT to compile the native extensions I need. However, to use iOS5 features (and add additional frameworks from Xcode like MessageUI), the swf file has to be version 14.
With the latest Flash Pro CS55 update, my compiled SWF files are version 13, and when I try to publish an ipa-ad-hoc file, it tells me the "root swf file version" is 13 while the extension (I'm assuming library.swf) is in version 14. I've of course tried overlaying the Air 3.1 SDK over the appropriate directories within CS55, as I did with Air 3.0 SDK, but no go?
thank you and with kind regards,
Alex

Hi user23890123,
I need swf-version 14, because (and please correct me if I'm mistaken), Air SDK 3.1 started support for being able to include non iOS-API-calls (beyond stuff like you see here on the samples: vibrate the phone, get battery level, pop up an alert, etc.). For example, being able to include the MessageUI framework to pop open an sms or email composer view, or features new to iOS5. You can now include a platform.xml file in the .ane file where your static library is, and include them like such:
<platform xmlns="http://ns.adobe.com/air/extension/3.1">
    <sdkVersion>5.0</sdkVersion>
    <linkerOptions>
              
        <option>-framework MessageUI</option>
    </linkerOptions>
</platform>
thank you,
Alex

OTF/PS fonts have recently stopped rendering in Flash Pro CS3 on Windows 7/64

Recently, a number of my OTF/PS fonts have stopped rendering when used in Flash Pro CS3. The fonts appear in the fonts menu, render properly in the font preview popup in the font menu, but the fonts fail to render on stage when used, with certain exceptions:
--If Bitmap Text is selected, the fonts appear (but aliased)
--If Anti-alias for animation is selected, then the text appears when text insertion is active in the text box, but vanishes when focus shifts to another element, tool, selection
In all other cases and for all other settings (yes, including black text with 100% alpha on a white background, etc etc), the text shows solely as transparent. You can select the text (although not see what you're selecting), cut and paste, and as you change the font size, kerning, justification, bold, italic, etc, the text boxes resize as normally expected; simply, the text does not show up.
The fonts work normally in all other CS3 and Windows applications, and up until about last week (Dec 12 or so), used to work fine in Flash.
The problem fonts appear to be (primarily Open Type Format) Post Script Outline fonts.
I have installed all Windows updates, Flash Pro CS3 updates, deleted the Flash user config files, deleted and reinstalled the fonts, and copied the fonts to the C:/user/Program Files/Common/Adobe/Fonts folder.
There were no new installations (applications, fonts, etc) around the time when the error started showing up, aside from possibly Windows updates.
Given the timing (worked fine Tuesday, failed on Wednesday), I believe a Windows update may have been at least partially responsible, though perhaps it's the Mayan apocalypse.
Running Flash Professional CS3 on a Windows 7 64 bit system.

uninstall windows update kb2753842

Error U44M1L210 when installing Flash Pro CC

While installing the latest Flash Pro CC update I had a network glitch and the download stopped abruptly halfway through. Now I am getting Error U44M1L210: Unable to extract the downloaded files. I have tried uninstalling and reinstalling Flash with no luck. I'm running Windows 7 x64 on an i7.
Thanks!

U44.. update error http://forums.adobe.com/thread/1289956 may help
-more U44.. discussion http://forums.adobe.com/thread/1275963
-http://helpx.adobe.com/creative-suite/kb/error-u44m1p7-installing-updates-ccm.html
-http://helpx.adobe.com/creative-suite/kb/error-u44m1i210-installing-updates-ccm.html

Flash Pro CC not showing createjs Toolkit under Window menu as presumably it should

I'm using Flash Pro CC on a Dell workstation and not getting the createjs Toolkit panel under Window menu, (when i know it should be, right under the Motion Presets according to others' testimony).
I tried using Flash Pro CC update to fix the issue but it's not fixed.
Assistance would be appreciated.

http://forums.adobe.com/thread/1353942?tstart=0

Features Disabled in Flash Pro CC

I recently purchased Flash Professional to use for animating, after trying it out. During the period where I was using the trial version of the software, I noticed that certain options were not available to use, but I assumed that it was because I was using a trial. After purchase, the features are still disabled. Some of them are extremely important for me to use, like being able to change to a blend mode other then "Normal" or "Add", and being able to use the Hairline stroke width preset for shading.
I've searched online extensively and have not found an answer. Adobe also doesn't appear to mention these features as being disabled in the trial version, which is even more confusing. Is it me, or them?
My specs are:
OSX 10.9.2 (Mavericks)
2.9 GHz Intel Core i5
8 GB 1600 MHz DDr3
As you can see, it doesn't let me use these features. There are other disabled features as well, such as:
Horizontal and Vertical in Scale
Miter
I can only change the top left corner in the "Rectangle Options" on the Rectangle tool.
Can't import video.
Among others.
Any help would be appreciated, thanks!

Hi,
You must be using an HTML5 Canvas doctye in Flash Pro where you see these options as disabled. This is because of some limitations in the CreateJS export or browser support for some of these features.
If you create a regular AS3 doctype(for Flash), it'll have all of these options enabled.
There are no limitations in terms of features in the trial version and full version of Flash Pro CC, apart from the time limit ofcourse.
Let me know if you still face any issues.
-Nipun

Flash Pro CC Hotfix 13.0.1 available now

Flash Pro CC update which has some critical bug fixes is now available. Please log into your Create Cloud client to download the Flash Pro updates
More details on the bugs fixed in this update is available in the release notes:
http://helpx.adobe.com/flash/release-note/release-notes-flash-pro-cc.html#Flash%20Professi onal%20CC%20Update%201%20%2813.0.1%29
-Sujai

Thanks for this, will let you know if this resolves any of our issues.

Flash pro css3 update from f8

Similar Messages

Maybe you are looking for