Flash problems when uploading to site. CS3

hi. hope you guys can help.. i've been stuck with this
problem for a while now. i have been putting flash files (.swf)
into my dreamweaver document and it looks fine in firefox (nothing
shows up in safari) in preview mode but when i upload it all only
the home page with flash on it appears. i've put the scripts folder
in but still dont know why it doesnt show up on the other pages. in
safari nothing shows up at all again.
any help would be very useful. link below.
http://panterhudspith.com/panterhudspith/index.html
thanks in advance.

Moving files FROM WITHIN DW allows DW to manage such path
changes.
Use Find/Replace to remove the improper part of the path.
"Ken Binney" <[email protected]> wrote
in message
news:g8bskg$rv8$[email protected]..
> Some of your links are pointing to your local computer
> <script
>
src="file:///iMac-8/Users/sapna/Desktop/2008/Scripts/AC_RunActiveContent.js"
>
>
> "iiod" <[email protected]> wrote in
message
> news:g8bm3f$lc9$[email protected]..
>> hi. hope you guys can help.. i've been stuck with
this problem for a
>> while now.
>> i have been putting flash files (.swf) into my
dreamweaver document and
>> it
>> looks fine in firefox (nothing shows up in safari)
in preview mode but
>> when i
>> upload it all only the home page with flash on it
appears. i've put the
>> scripts
>> folder in but still dont know why it doesnt show up
on the other pages.
>> in
>> safari nothing shows up at all again.
>>
>> any help would be very useful. link below.
>>
http://panterhudspith.com/panterhudspith/index.html
>>
>> thanks in advance.
>>
>
>

Similar Messages

How to avoid the split problem when uploading the data from csv file

Dear Friends,
              I have to upload data from the .csv file to my custom table , i have found a problem when uploading the data .
i am using the code as below , please suggest me what i have to do in this regard
      SPLIT wa_raw_csv AT ',' INTO
                wa_empdata_csv-status
                 wa_empdata_csv-userid
                 wa_empdata_csv-username
                 wa_empdata_csv-Title
                 wa_empdata_csv-department.
APPEND wa_empdata_csv TO itab.
in the flat file i can see for one of the record for the field Title as
Director, Finance - NAR............there by through my code the wa_empdata_csv-Title is getting splited data as "Director, and Department field is getting Finance - NAR" , i can see that even though " Director, Finance - NAR" is one word it is getting split .
.......which is the problem iam facing.Please could any body let me know how in this case i should handle in my code that this word
"Director,Finance - NAR"   wil not be split into two words.
Thanks & Records
Madhuri

Hi Madhuri,
Best way to avoid such problem is to use TAB delimited file instead of comma separated data. Generally TAB does not appear in data.
If you are generating the file, use tab instead of comma.
If you cannot modify the format of file and data length in file is fixed character, you will need to define the structure and then move data in fixed length structure.
Regards,
Mohaiyuddin

Problem when uploading a large file in PI - weird SQL I/O errors

Hi guys,
I'm facing a very difficult problem when uploading a 35 MB with an FTPs adapter. I see in the logs that, after the translation to XML, it's going to 170 MB.
I receive the following error in the CC Monitoring:
Error: com.sap.aii.af.ra.ms.api.DeliveryException: Problem inserting 41827ca7-6b8c-4a87-198d-ad8a81fcb12b(OUTBOUND) into the database: com.sap.engine.services.dbpool.exceptions.BaseSQLException: Connection is invalid.
When I look in the NWA Monitoring, I see the following details:
SQL error occurred on connection affhb201:X11:SAPSR3DB: code=17,002, state="null", message="Io exception: Socket closed";
SQL statement is "INSERT INTO "XI_AF_MSG" ("MSG_ID","DIRECTION","MSG_BYTES","TIMES_FAILED","SENT_RECV_TIME","STATUS","CONN_NAME","MSG_TYPE","REF_TO_MSG_ID","ADDRESS","TRANSPORT","CREDENTIAL","TRAN_HEADER","MSG_PROFILE","CONVERSATION_ID","SCHEDULE_TIME","PERSIST_UNTIL","FROM_P........
I cannot check the Visual Admin Logs 'cause I don't have access to them yet.
I'm pretty convinced that some swap memory, message size or whatever setting on the adapter engine or on the Java stack is preventing this. I do not get any message in CC Monitoring when uploading a smaller, 6 MB version of the same file.
Can you please help me solve this or give me some interesting pointers?
Never before did we experience something like this in the PI system. In addition, I didn't find any useful resource on the SDN and throughout the SAP notes for this.
Let me know if you need more info about this.
Best regards,
George

Hi George
I am facing the same issue, where did you configure the message split in the Communication Channel?
If I do the message split as you said, is it going to create several files or how does it work?
Thanks in advanced
Emmanuel

Problem when upload legacy data

Hi all,
I've faced a problem when uploading asset legacy data (AS91) for customer. My customer have started depreciation on May 21, 2009, and I set transfer date is November 30, 2010. So SAP doesn't calculate right planned value for December, 2010. I think that problem related to the first month depreciation. It calculated full month for depreciation (instead of from May 21) and change the planned value for December 2010. So I want SAP just calculate 11 days depreciation for May 2009. How can I config to do this?
Thanks in advance!

Hi,
Check in the asset master Opening Start Date for depreciation.. If it is under open mode change that date and see asset explorer for depreciation values.
Thanks,
Padmaja

Using DW CS6; when uploading a site DW changes all dates to today; how can I upload without changing the file-dates?

Using DW CS6; when uploading a site DW changes all dates to today;
how can I upload the site whilst preserving existing file-dates?
Thanks
Paul

How are you uploading?
I do not see this behavior in DWCS4 or DWCC (I assume nothing changed in DWCS6 and then back for DWCC, but I could be wrong).
However, when I upload, I only select the files I have modified after an initial "Upload Entire Site? Yes/No" prompt. If you aren't selecting specific files to upload, and you're overwriting the files on your server with new copies of your entire local site each time, the mod dates would show as the date/time of your upload.
To select only the files that have changed since your last upload...
1. Right click on your local root folder in the Files window under Local View
2. Go to Select > Newer Local from the context menu
3. Wait until DW is done talking to the server, it could take a while, when it's done, all of the files that have a newer mod date locally than their server counterparts will be selected
4. Click the Put (up arrow) button
For me, this process never changes the dates of files that aren't part of the upload.

Caracters viuw problems when uploading site

some turkische caracters disapear when uploading site:
i use DW 3
the caracter set is Unicode UTP-8
php code is:
<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-9" />
normal localhost vieuw is ok
uploading on webserver give problems.
any suggestions please?
thanx

normal localhost vieuw is ok
uploading on webserver give problems.
According to below reference it seems your doc is correct but hosting provider may not support your content type header. Short answer is ask your hosting provider, but there are some troubleshooting suggestions as well in the link below.
I hope this helps, scroll down to How To Specify the Character Encoding and then Web Server: http://www.granneman.com/webdev/coding/characterencoding/

Flash problem when viewing in windows

When I view my flash work on a web site in windows (works
fine in mac) when you mouseover the flash area it comes up with a
boundary box with a comment tag saying "Click to activate and use
this control" - you then have to click in the flash area before you
can start using any of the flash features, such as buttons and so
on.
I'm not sure why this is happening, but it seems to have
something to do with flash 9, windows, and my publishing settings
(im guessing). I know its not a browser issue or setting as i've
viewed many other sites with flash where they don't have this
happening..
All I'm doing is creating my flash, exporting it and then
importing it in dreamweaver.. Simple and straight forward
Can someone please explain to me how to fix it.
Thank you.

I am having the same problem as you. The problem is the
publisher settings fro Flash. The very last section you will see
"Local playback security" with a dropdown list of
* Access local files only
* Access Network only.
I hate these options and I wish there was a work around. I
noticed that my flvplayer buttons will not show up using the
network settings on the web but I can see the video. On the
otherhand, the video will not play embeded in a html file.
The local setting plays perfect on my computer, I can see the
video and flvplayer components, however the video will not play on
the internet.
I just do not know what to do.
In summary, the network settings will play on the network but
will not show the buttons and the local will not play on the web
but plays perfectly on the my computer.
Go figure

A strange problem when uploading a file in Struts

When i upload a file, the other elements in the form of the jsp cannot be got by the ActionForm, instead, the getters show that they are "null"s. But when i upload no file, everthing is ok.
Moreover, the problem happens when i update an article which can have an picture with it, but when i add a new article, the problem does not appear, instead, the file can be uploaded and other element can also be got.
i think i might be a problem of the volume of the request , because i put more information to update than to add.
Hope someboby can help me with the problem.

When i upload a file, the other elements in the form of the jsp cannot be got by the ActionForm, instead, the getters show that they are "null"s. But when i upload no file, everthing is ok.
Moreover, the problem happens when i update an article which can have an picture with it, but when i add a new article, the problem does not appear, instead, the file can be uploaded and other element can also be got.
i think i might be a problem of the volume of the request , because i put more information to update than to add.
Hope someboby can help me with the problem.

Encounter Problem when upload Data for T-Code CJ92

Dear All,
I want to upload Standard WBS element through transaction code CJ92. I am encountering a problem when I want to upload more than 13 Standard WBS for a project using recording (SHDB).
I have also tried to upload data through BAPI u201CBAPI_BUS2054_CREATE_MULTIu201D but this BAPI didnu2019t work for standard WBS.
Please provide me a solution to upload Standard WBS (CJ92).

Thanks Shyam,
But this BAPI "BAPI_PROJECT_MAINTAIN" works only for operative WBS and I want to upload Standard WBS. The T-Code to create Standard WBS is CJ92. The screen upload can't be possible due to screen limitations.
Please provide me any solution to upload Standard WBS.
regards,
Saif

Has EMBED Flash problem in IE caused sites to abandon Flash?

Apparently this problem has been around for a while and
several sites
that used Flash for slideshows on their homepages seem to be
using ajax
now. I didn't realize that there was some eolas patent issue
that
Microsoft activex was violating. I finally found a site that
explained
how to add Flash with a javascript, but am wondering if other
webmasters
just decided to remove their Flash content and used ajax or
something
else? Given that Microsoft is trying to push Silverlight it
appears
suspicious that this embed problem has come up recently. Is
this just
another attempt by Microsoft to include issues in their
products that
interfere with the products of other companies?

Professor wrote:
> Apparently this problem has been around for a while and
several sites
> that used Flash for slideshows on their homepages seem
to be using ajax
> now. I didn't realize that there was some eolas patent
issue that
> Microsoft activex was violating. I finally found a site
that explained
> how to add Flash with a javascript, but am wondering if
other webmasters
> just decided to remove their Flash content and used ajax
or something
> else? Given that Microsoft is trying to push Silverlight
it appears
> suspicious that this embed problem has come up recently.
Ajax is much easier to update to none Flash Savvy users.
Perhaps going back and
forth to a designer asking him to update a slide show is not
something some like
to do.
I wouldn't assume flash it's going to be abandoned because of
such a minor
issue, in fact I see with the release of Flash 9 player and
now flash 10 and latest
Flash authoring tool out the corner, flash only intensify
it's present online.
Papervision is almost everywhere, Audi A5 - A Rhythm of
Lines, Sony BRAVIA, Canon EOS 400D,
HBO Voyeur, Nike Sweet Spots and lots more. More and more
people are asking specifically
for suites built with this new environment.
Adobe solved the EMBED problem almost as soon as it appeared.
Flash not automatically generates
JS file and your object embed tags accordingly. There is also
very popular swfobject that
most of us use instead of the Adobe's methods...
> Is this just
> another attempt by Microsoft to include issues in their
products that
> interfere with the products of other companies?
The embed did not just effected Flash but many other
technologies. On top of it
MS lost rather substantial amount of money in the EMBED
patent case so I wouldn't think
it was to suppress one and promote another product.
Best Regards
Urami
"Never play Leap-Frog with a Unicorn."
<urami>
If you want to mail me - DO NOT LAUGH AT MY ADDRESS
</urami>

Problem when upload file

Hello everybody, i need to upload a file to a server and i use the following code:
DiskFileUpload upload=new DiskFileUpload();
List items=upload.parseRequest(request);
Iterator itr=items.iterator();
while(itr.hasNext()) {
FileItem item=(FileItem)itr.next();
if(item.isFormField()) {
String fieldName=item.getFieldName();
if(fieldName.equals("pagina")) {
pagina=item.getString();
if(fieldName.equals("posizione")) {
posizione=item.getString();
if(fieldName.equals("link_pub")) {
link_pub=item.getString();
else {
path=application.getRealPath("/")+"pubblicita"+"/"+pagina+"/"+posizione;
File fullFile=new File(item.getName());
image=item.getName();
savedFile=new File(path+"/"+fullFile.getName());
link_foto=path+"/"+fullFile.getName();
item.write(savedFile);
it is working on local machine (localhost) but i publish the site on the server and i have this problem:
type Status report
message /home/242654543544/www/web/pubblicita/home/1/publicita.gif (Permission denied)
description The requested resource (/home/242654543544/www/web/pubblicita/home/1/publicita.gif (Permission denied)) is not available.
Help me......

How i can give the right permission for upload the file?I try to give the 777 permission to the www/web/ folder but i don thave the permission.
Have i speak with the provider of the hosting?

Error Message When Uploading My Site

Hey,
I am trying to upload my first iWeb website. However each time I go through the publication process (file>publish), it crashes! And I get an error message saying something like "error encountered when publishing pagename : picturename.png" and then my website is not published. But the craziest thing is that it is not on the pictures that I added that it crashes, it's on pictures that are comprised in the page model (like the stars or background.png)!!!
Any input on how to FIX this???
I would be grateful forever!!
THANKS
iBook G4 Mac OS X (10.4.4)

Four things could be going on, but it's fixable.
first.. make sure that your screen saver, and energy saver are turned off in your system preferences. iWeb had trouble with this in it's first version, but since the update it's supposed to be fixed, but I'd still do it.
second, it's been my experience that iweb is affected by bandwidth issues while uploading. If you're using your browser, uploading or downloading anything else... you'll get the error message and that one file couldn't upload. Make sure that when you click on the publish button you walk away from the computer and don't use it. This appears to be a bigger problem for us G4 users than the G5 folks. Also, it's a memory hog, so seriously, when you publish turn everything else off except your computer and iWeb and walk away. Seems to work for me.
Third... make sure your idisk is NOT loaded onto your desktop. If it starts refreshing and files are getting put there while you're uploading, iWeb will give you the dreaded error message.
Finally, just keep republishing. iWeb seems to bog down when you publish sometimes. I re-uploaded my entire website last night, including 7 video podcasts and numerous other blogs that have audio and video in them. I had to publish and publish and publish.... it took four tries, but it finally finished. It seems that it gets farther and farther along each time. Anyway... it works.
Hope this helps.
Jim
20" Imac 1ghz (lmpstd), Mini, G4 Dual 1.8(upgraded), G4 400, Powerbook,12", eMac Mac OS X (10.4.4)
20" Imac 1ghz (lmpstd), Mini, G4 Dual 1.8(upgraded), G4 400, Powerbook,12", eMac Mac OS X (10.4.4)

Problem when uploading CSV File

Hi, i'm testing some changes i made to an infoprovider and something strange is happening to me (as usual) I have a CSV file that is uploaded into BI from my PC and I tested this file with 100 records, later i deleted 98 records so i can test the file with fewer records in order to analyze the formulas in BEx with some very specific data. Now here is the strange part: even though i modified the file and left only 2 record in it, when I run the DTP the system is still uploading 100 records!?! How can that be possible. I checked everything, the datasource and the infopackage are both pointing to the same file (the one which has two records) and there is no other file in the entire hard drive that has 100 records and/or the same name/structure that the file i'm uploading into BI. I just can't figure out why the DTP is uploading more records that I have in the CSV file!?. Any ideas??
Another thing: I'm having problem with 0calmonth, tried everything. I put the calmonth in the CSV file in both formats MMYYYY (092010) and YYYYMM (202009) but I still get error when running the DTP. I have activated/deactivated the conversion routine in the transformation and in the datasource, I change the field length in datasource and tried any possible combination of these changes and I still can't make it work. I searched here and read all the post related to this issue but i still can't figure out how to properly upload information into 0calmonth.
Regards, Mauro

pls check the data in PSA.... you may be loading only 2 records..
Also possible that the DTP is set to load FULL data.... so its loading the entire data from PSA (old + new)
the calmonth format should be YYYYMM... what is the error message u r getting... you can always check the PSA and see whats the format coming there

Problem when upload a image

i have to upload an image in #WORKSPACE_IMAGES# , but when i choose my file, the browser view a blank page and i can't upload my image....how can i do?

Hi massimorigo! 
 
I don't know what browser you're using. I had the same problems with Mozilla, Firefox and Konqueror. 
Forget the Konqueror. In Mozilla or Firefox just change the Standard Language to "ENGLISH". I don't know why but it works! 

~Dietmar

When uploading a site how to automatically add supported files

I have cs5.5 and when I upload an edited page to a site that I have, how do I include all images and other files (include php files) that are part of the page, without having to upload each file seperatly. I had this set up on dw 8 and cs4, that everything pretending to that page got automatically uploaded, but can not seem to be able to find where i set this up on cs5.5, thx for your help

When you transfer a document between a local and remote folder using the Files panel, you have the option of transferring the document’s dependent files. Dependent files are images, external style sheets, and other files referenced in your document that a browser loads when it loads the document.
When you put files on the server for the first time, DW asks you if you want to include dependent files, and also to check a box to stop asking again in future. Someone must have clicked the box!
Go to DW Preferences > click on 'site' panel. Dependent files -- 'prompt on get/check out' and 'prompt on put/check in'. Make sure these boxes are both checked.
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb
http://alt-web.blogspot.com/

Flash problems when uploading to site. CS3

Similar Messages

Maybe you are looking for