Flash Professional CC Magic Wand Tool not working

Simple problem. The magic wand tool wont select anything. There is a little "STOP/NO" on the icon though (The circle with a cross through it). Don't know what's wrong.

Not supported? Are you kidding me?!?I
I have a Wacom Intuos5 Touch and use a Wacom mouse with it (in addition to the standard Grip Pen). My problem is worse than the original poster. I have this problem with both my pen and my mouse. The pen is in "pen mode" and the mouse is in "mouse mode," but the problem exists in both modes for both input devices (yes, I tested my mouse in "pen mode," it's not something I'd recommend).
I have no idea what to do about this. I work in 2D film/TV animation, and this renders Flash CC 2014 completely useless to me and my colleagues.
These were "drawn" with a mouse in mouse mode, and a pen in pen mode. The angle and offset of the error seems to depend on the canvas zoom level, but is otherwise random-ish, changing to a random angle, keeping it for a while, then changing it again. I run a multi-monitor setup, and when I move the Flash window from the right-side monitor to the left-side monitor, the direction of the offset flops. It always points up, and toward the center of my two monitors, as if it were a application scaling problem (Windows' DPI settings have been known to cause this kind of problem with some applications, but my setup uses 100% scaling so that shouldn't apply).
I suspected that the angle might have something to do with the rotation angle of my mouse (the Wacom tablet tracks that information), but couldn't get reliable expected behavior when I tested it out.
This whole nonsense reminds me of an error that plagued applications built using the Qt4 framework (such as the VLC video player), which had similar "hit area" problems for Wacom devices (pen and mouse) due to an improperly implemented pen input API (it was fixed in Qt5 by dropping support altogether and treating all input devices as mouse input), but I can't imagine that's what's happening here.
Of course, Flash is registering the initial contact point before flinging it across the screen, so it's a big mystery, and frustrating me to no end.

Similar Messages

Coloring issues with magic wand tool and paint bucket tool, leaves uncolored areas near drawn lines

Photoshop CS6 doesn't color properly. Whetever I use brush tool or elliptical marquee tool to do the lines (with brush tool I use Hard Round, not soft), it doesn't color the whole area when i fill them with color. This happens with both magic wand tool AND paint bucket tool, there is always a small uncolored area near the lines. I have tolerance on 30, and anti-alias, contiguous and sample all layers boxes checked. (this setting worked on my old CS3) I have tried tolerance from 0 to 100, no difference. I have also tried unchecking the boxes I just mentioned, still no difference. I hope there is a solution for this, because it is tedious to always go to the Select - Modify - Expand every time I need to color some area. So how do I fix this problem? I use seperate layers for lines and colors, like I have always done with other Photoshop versions. Even in school where they have CS5 those normal settings work.

Hello Chris,
I don't think this is a "user error". I think Adobe should be able to program a state of the art paint bucket, which is capable to get this done right.
Other applications are able to get this done right.
Please don't fall into a programmer's ignorance ("this is done right by definition") but listen to us artists and improve this unintuitive behavior. Add something like "ignore transparent pixels", because this doesn't even work if you draw on an empty layer.
Thank you!

Photoshop CS 5 - Magic Wand Tool Problem

When I use the magic wand in Photoshop CS5, it selects the entire image, not just the section I'm hovering over. I'm working in a Windows environment.
Any suggestions?

Try resetting the magic wand tool by right clicking on the magic wand icon in the tool options bar and choosing reset tool.
Also check what the sample size is set for the eyedropper tool (that effects the magic wand)
You probably want one of the first three settings.

Content-aware-fill and magic-wand-tool

Hello! I use the content-aware-fill to remove some text from a photo. To do so, I use the "Polygonal Lasso Tool", select the text with a generous border and click edit -> fill -> content-aware-fill.
This works fine, but selecting a text with the lasso-tool is very much work. So I tried to use the magic-wand-tool - some clicks and the text is selected, very fast and fine. No applying the content-aware-fill - the text vanishes somehow, but the borders of the text are still visible. I guess you really have to select the text AND some background around it to make content-aware-fill work. But isn't there a way to do this with the magic-wand-tool? Increasing the tolerance didn't work, I would need something like "magic-wand-tool and increase the selected area +20 pixels in all directions".
What procedure do you suggest?

Are you trying to remove a watermark that says something like "Proof" or "Copyright"? If so, you won't get much help here. The best advice in that case is to actually pay for the photo. It's surprising how many people ask for help doing illegal things.
Please confirm you are not trying to defeat someone's copyright (e.g., post a small part of the image), and I'm sure you'll get more help.
-Noel

Photoshop CC missing Magic Wand Tool

Hello! I've got the new Adobe Creative Suite for Student and am working with Photoshop CC at the minute but cannot find the Magic Wand Tool anywhere... is it not in this version, or is it hiding somewhere... can't locate it. Please help?

Look in your Tools:

CS5 Magic Wand Tool Question

I have a new Mac and I just got CS5. I find that the Magic Wand tool works differently than it did with CS3 on my PC.
First, I'm used to being able to see the "marching ants" as I select the areas. In CS5/Mac they don't appear until the area is selected. Is there are setting in CS5 for the Mac that will let me do this?
Second, the tool is refusing to select an area in the center of the image that is the same color as the background. I don't know why this is happening.
Third, at a certain point, the tool just selects the entire image.
And one more thing: The wand size is much larger relative to the image than it was in CS3/PC. I would like to change it, but I do not see an option to change the brush size.

Magic wand:
Quick selection:

Magic wand tool?

Hi guys/gals. I was just wondering if there is an easier way to remove a person from a picture. I've read some tutorials on the web and they all pretty much consist of using the magic wand tool. However I find it's kind of hard to use. It only selects tiny pieces of the image at a time. I can get it to cover some part of the image I want to keep but not all. I was hoping i could select all of the picture I want to keep then inverse and delete. Anyone know a quick way of doing this? I took a screenshot of what happens when I select the magic wand tool.

You can select the portion that you want to keep then inverse and delete. Select -> Inverse, will select the inverse then hit the Delete key. You may need to do this first:
Image -> Image Size, then memorize the size of the picture.
File -> New, and open a new transparent work area (RGB color mode) the same size as the original.
Select the Move tool and drag and drop the picture onto the work area.
Select the portion of the picture you want to keep.
Select -> Inverse.
Hit the Delete key.
That will work. I do it all the time.

Automatic whole object selection with lasso or magic wand tool.

Here I have a circle pattern, all the fills are the same, all have the same appearance,
when I try selecting all the internal scattered objects with the lasso tool, it only partially selects them, its slow getting around their borders while trying not to select the outer ring of objects, using the selection tool on this radial design is difficult, as when you select some pieces you deselect others, I was hoping for an option whereby you could tick a checkbox for the lasso or magic wand tool to "select whole object" when you run the wand or lasso over those objects.At the moment the lasso tool only partially selects based on which nodes you encircled.
I cannot select the outer ring (would be just as difficult with selection tool) and use inverse because there are many other objects on the page also, I could have created the inner circle on another layer initially, but had not, in this situation a small enhancement to the magic wand or lasso would be good for selecting whole objects. When using experimental design approaches we don`t naturally pre plan every step or idea from the beginning.
the other option is to select them all with lasso, the group them, move them then ungroup, but again just looking for the one step opportunity as it seems simple enough.

Agreed. I think an "Grow" and "Grow All" option in the Select menu is the best way to achieve that. (Maybe Adobe can come up with better naming)
"Grow selection" would increase the selection by one anchor point in each direction for each partially selected path.
"Grow All" would select all the anchor points of each partially selected path.
For example, if you have 1 point selected on a circle, "Grow selection" would add the 2 adjacent points to the selection for a total of 3 points. "Grow All" would select all the points on the circle.
Another related feature would be an "Add to selection" option in addition to the "Save selection". And why not a "Substract from selection" option? You'd simply select a few points, choose add or substract and choose which saved selection to modify.
A lot of the selection toold work at the object level, not at the point level, like Deselect/Reselect/Inverse. This can be frustrating.

CS Crashes upon using Magic Wand tool

As the title says. Every time I use the magic wand tool, Photoshop CS crashes. I tried resetting the program but it didn't work. I cannot find a patch for this anywhere. Its making photoediting very difficult! Is there a patch I can download anywhere? Such an expensive program should NOT be crashing like this.

Hi. This forum is for beginners trying to learn the basics of Photoshop. I'm moving your question to the Photoshop General Discussion forum for specialized attention to your situation.

Magic wand tool that will select broken-line shapes?

I'm an illustrator... working in both digital & real artwork.
I work mostly in Photoshop CS, but I have been searching for a solution to a digital problem that I can't quite seem to find using either Photoshop or Illustrator.
What I wish to do is scan a pencil drawing and then create selected shapes in a quick and easy method using a magic wand tool.
But it needs to be a magic wand tool that will select an area drawn from a series of broken lines. Photoshop will only select shapes that are 100% intact, so I wind up having to spend lots of time searching to repair broken lines before Photoshop selects just that one area.
I KNOW that such a program exists... because I recall there used to be such a program. It was a free dowloaded program that I got once, way back around 1998. I think it came from Australia... and it was a basic digital paint program of some sort. I can't recall the name.
It allowed one to quickly click and select an area from within a shape drawn with broken line segments...
Does anyone know of any program (hopefully for Mac) that allow this sort of selection?
This would save me hours of frustration. I can't believe Adobe hasn't come up with something like this already.
Thanks...
John Nez
www.johnnez.com

Gerno
I doubt that I will get to trying the proposed method on that sample image this weekend. I can make a few quick comments, however.
Like numerous Photoshop tools, the success of Illustrator tools like Live Trace and Live Paint are very image dependent and some experience helps. Here are some comment on the three steps needed.
First, the Live Trace step must be done well. There are a boat load of parameters for this process. For the subject image my guess would be to start with a preset and the one I would choose would be comic art.
Secondly, once you make a live paint group you have to have automatic gap detection checked (turned on) and you choice of predefined or custom gap sizes specified. You will then see where the gaps are automatically found and fixed and the gap options dialog box will tell you how many have been found. If you like what you see you can just start painting. Usually, however it is an iterative process of painting some of the areas and then resetting the gap detection and painting again. At any point you can automatically close the paths (but you cannot go back), change the settings to auto detect even larger gaps and try again.
Third is the manual phase. If lucky you will have none of this. On the subject image, however, I can see that some of this is required. To preserve the artistic content of the original one draws a line in the very big gaps having no stroke or fill (invisible line)and then you use the live paint bucket. While the above sounds like a lot of work, it can go very quickly with many drawings.
JN
>That's why I think Adobe ought to work on designing a 'smart magic wand tool'... that could select imperfectly closed shapes.
The Live Paint tool in Illustrator does this. It automatically detects gaps and lets you paint as if they were not there.
Paulo

How to do a magic wand tool like photoshop with java?

in a JPanel,a bufferedImage with a great many colors show in it.
now,i want to select a region with same color use a magic wand tool ,just like photoshop,how to do it?
Thanks.

maybe it is not a feasible way!
i have loading a image size of 150*50,
when i use getPixelColor() method as follow,it used almost 40 seconds to end it.it get correct info of every pixels,but too slow. say nothing of analysis the pixels and catch a selection.
//*******the getPixelColor() method**********//
public String getPixelColor(BufferedImage bimg){
String info=new String();
for(int i=0;i<bimg.getWidth();i++)
for(int j=0;j<bimg.getHeight();j++){
int rgb=bimg.getRGB(i,j);
int red=(rgb>>24)&0xff;
int green=(rgb>>16)&0xff;
int blue=(rgb>>8)&0xff;
info=info+"R:"+red+" G:"+green+" B:"+blue+" X:"+i+" Y:"+j+"\n";
return info;
//****end *****//
then invoke method:
System.out.println(getPixelColor(myimg));

Is the magic wand tool the best tool for cutting out a person's head?

Need advice! The picture is of a girl with her hair blowing in the wind, so I'm not sure about using the magic wand tool.

I guess we should ask what version of Photoshop the OP is using.
One could arge that the OP should have provided that information by themselves and, if not, kind of deserves potentially being confused by having functionality presented that may not be part of their set-up …
Edit: But in all fairness I suspect I may have omitted such information myself when I first started asking questions on this Forum.
Not to mention that it seems somewhat remarkable howt many people seem to prefer talking about specific images to simply posting them (or lores or section of them) – which would make assessing the tasks in question often a lot easier.

What is wrong with my magic wand tool?

I just started loading up photoshop to crop a picture and my magic wand tool has gone all funny. i don't know why but instead of cropping all the white back ground it does this http://imgur.com/oDTxXyK
someone please help me!

Look at the tool options. You set the tolerance to 200, so it's going to select just about everything...
Also, "crop" is not the right word there. I think you meant "select".

Where is the magic wand tool in photoshop cc

ive tried clicking on quick selection brush tool but magic wand icon not there?

I found it, thank you

I have installed the latest version of Adobe flash player and it still does not work what did i do

I have installed the latest version of Adobe flash player and it still is not working and every time I enable shockwave the internet does not respond

Clear your cache Tools > Options > Advanced > Network > clear now
Right-click on video > Settings > turn off Hardware Acceleration

Flash Professional CC Magic Wand Tool not working

Similar Messages

Maybe you are looking for