Flash Professional Question: About the compiler error window

Sorry if this is the wrong forum however I was unable to post a question to the Flash Professional forum for some wierd reason. Basically my question is, when I get an error in my console in Flash Professional is there an elegant way of zooming to my intended editor, Flash Builder? The built in code viewer is useless and a hassle to use.

Launch the movie Flash Builder:
Run > Test Movie will launch in Flash Pro and give compile errors in Flash Builder
Run > Debug As.. will start a debug session (in browser or AIR) and you can debug it from Flash Builder (runtime errors, breakpoints, etc.)
-Aaron

Similar Messages

  • Flash professional crashing pc on compile errors

    I seem to have put this in the wrong place before, so here it is in the correct area I hope
    ===============================================================
    I have been working on an Air app in cs4. The version of Air is 1.5.
    For some of the features in Air that would make things easyer for me, I need to upgrade.
    So I downloaded cs6 to test out as it has Air 3.2
    Problem I have found is that my project crashes the PC every time the compiler  catch's an error. Any error.
    I also reinstalled in case it was a bad install.
    My system stats are : XP Prp 32bit sp3 with 3GB ram and all the latest updates.

    Firstly I must say that my OS has nothing wrong with it.
    I like xpPro as it is the best out there. I will wait and see how win7 and 8 do before deciding to move.
    If it is the instilation that might be "worn out", I periodicaly wipe my drive and reinstall so as to have the best setup possible. I also use windows steady state so I know that there will be no bug's lingering after a full boot.
    (though I do not do a full boot every time whitch is true).
    As for flash, I did download it from the site twice. Once as the "Master Collection" and again as a standalone download to test different instals. They both are the same.
    As you sagested, I also re done Air. I un-instaled it first and then downloaded it and re-instaled it. The SDK was current.
    On a side note, my flash cs4 has now stopped compiling. It goes through the motions and then nothing. Just a file with nothing in it.
    The only thing off the top of my head would be that the Flash compiler is to blame.
    I have not tested it with a normal flash doc yet as have only now thought about it while writing this, and if it did not work, would crash this message as well as the pc.
    So Will do later though.
    ==========================================
    ok done a quick test...... only the AIr aps crash the computor, so what is it with Air????
    I did think that it might have been depricated functions in Air, but that would not account for the standard errors.
    That would only point to it being in the Air compile script.

  • Question about the Insignia 8: Windows 8.1 Tablet

    Here is my situation. I currently have a 10.1" Gateway Netbook that seems like it's running on it's last leg. I bought it used originally and it's a 2009 model.
    Today I was browsing BestBuy.com and I came across a 8" Insignia Tablet running Windows 8.1 and having an Intel Atom Processor. I read the specs and it says it has access to plug in a USB 2.0 device.
    What I was wondering, is the USB 2.0 access through a dongle that connects to the Tablet itself? And another question I had was the way it charges. I was wondering if the charging mechanism plugs into the wall through the USB port that's on the tablet or if it's another jack that charges it. I was going to use it as a "Light desktop" replacement for my Bedroom to watch Youtube videos and play very very light games on it, etc. It looks like it's also energy efficient and it's similar in specs with the 32GB eMMC Solid State Drive that's on my HP Stream Laptop. 
    I'd want to use a stand for it, and also connect a USB 2.0 Hub just to be able to connect a wired keyboard and mouse. 
    Thanks to anyone for any insight you may have on this. 
    *******DISCLAIMER********
    I am not an employee of BBY in any shape or form. All information presented in my replies or postings is my own opinion. It is up to you , the end user to determine the ultimate validity of any information presented on these forums.

    Hockeycanuckjc,
    I actually have this tablet personally so I'd be happy to help you with how I got it to work.
    Because the Insignia 8.1 tablet doesn't have a full USB port, you would need a dongle that converts micro-USB to USB in order for this to work. I actually picked up this guy one night after work and it solved my problem instantly:
    http://www.bestbuy.com/site/samsung-galaxy-micro-usb-to-usb-adapter/1688641.p?id=1219059709888&skuId...
    Although it says it only works with Galaxy devices, I have gotten it to work on many different tablets and phones of varying brands and OSes, including the Insignia tablet. Although I personally haven't plugged in a USB hub to the extender, I don't think it will have any problems.
    Hope this helps!
    Alex M. | Best Buy Mobile - State College, PA (Store 369)
    Any opinions expressed in this post are those of
    the author and do not represent Best Buy Co., Inc.

  • How can I read ALL the compilation errors in a DOS window?

    On compilation using a DOS window, if the number of errors exceeds the window size, some of the errors disappear off the top of the window and I cannot read them.
    Is there an effective solution to somehow use scrolling of the DOS window or transfer the compilation errors to a file?

    Hey buddy,
    When I first started programming with Java, I wondered the same thing. I have the very best solution for you. This one is waaay easy!!!!
    There is a text editor which will not only color code your text for you, but you can easily configure it to give you the compiler /DOS output for Java. Just go to this website and download the program. Enjoy!
    http://www.textpad.com/

  • Question about the Filter type for the trace provide "Microsoft-Windows-Kernel-File"

    Hello all,
    I have moved this question from the Windows
    Server General Forum accorfing to the suggestion from Mr. Justin Gu 
    I have a question about the Filter function for the trace provider "Microsoft-Windows-Kernel-File".
    I can find the Filter function with the following operation.
    Mr. Justin Gu wrote:
    > You create a Data Collector Set for the trace provider "Microsoft-Windows-Kernel-File" and finish completely, then you > can right click it and select Properties.
    In the Properties dialog box, click Filter and
    then select ‘Edit…’. You will be> able
    to see the Filter type and Filter data in the Filter dialog box.
    What
    Kind of Filter can
    I use in this Filter dialog box?
    And, how can I set to exclude the some kind of datas?
    Could you give me your suggestion?
    Thank you.

    What
    Kind of Filter can
    I use in this Filter dialog box?
    And, how can I set to exclude the some kind of datas?
    Could you give me your suggestion?
    Thank you.
    I'm looking for the same information.

  • Hi All, I have question about the iMac operating system. I have the last updated. The problem when I manage the place of the folder windows they are all mixing up. I mean they not on the place where I left them. how to set they stay on the same place. Tks

    Hi All, I have question about the iMac operating system. I have the last updated. The problem when I manage the place of the folder windows they are all mixing up. I mean they not on the place where I left them. how to set they stay on the same place? I know there are different possibilities to set.
    I tried but it not helped for me. What I can do? How and where can set this they stay on their place?
    Thanks.
    laci

    Option 1
    Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
    If that fails:
    Option 2
    Download iPhoto Library Manager and use its rebuild function. (In Library Manager it's the FIle -> Rebuild command)
    This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. 
    Regards
    TD 

  • The mxmlc compiler displays the compilation errors in Japanese - and I want them in English!

    Working in a Japanese company I have to use a machine with
    Windows XP in Japanese. The thing is that I can barely read this
    language so it's really depressing when most Java apps (and Flex,
    through Eclipse, is one of them) outsmart themselves and default to
    displaying their UI strings/messages in Japanese
    without giving the user the ability to select another
    language.
    When compiling Flex apps using Flex Builder 2, the mxmlc
    compiler is internally called by the IDE to perform the compilation
    and then its output is displayed in the Problems View.
    Well, the English version of mxmlc, has all its messages
    (compilation warnings, errors etc) translated into Japanese (as far
    as I can tell, they are hardwired into the exe). So although I'm
    using the English version of the FB2,
    with -locale en_US specified as an argument for the
    compiler, all the compilation erros are reported in Japanese!
    Even after changes in "flex-config.xml" and "jvm.config" as
    you can see below, the compilation errors are still in Japanese. I
    started to doubt that there's a solution to this problem but I
    really hope there is one.
    TIA,
    .x.
    Here are the relevant portions of my config files and an
    example of mxmlc's output (Japanese might not display correctly):
    -- C:\Program Files\Adobe\Flex Builder 2\Flex SDK
    2\frameworks\flex-config.xml --
    <flex-config>
    <compiler>
    <!-- Turn on generatation of accessible swfs. -->
    <accessible>false</accessible>
    <!-- Specifies the locale for internationalization.
    -->
    <locale>en_US</locale>
    </compiler>
    </flex-config>
    -- C:\Program Files\Adobe\Flex Builder 2\Flex SDK
    2\bin\jvm.config --
    # Arguments to VM
    java.args=-Xmx384m -Dsun.io.useCanonCaches=false
    -Duser.language=en
    -- mxmlc invoked on the command line --
    mxmlc -o ASCIIArt -locale en_US ASCIIArt.mxml
    Loading configuration file C:\Program Files\Adobe\Flex
    Builder 2\Flex SDK 2\frameworks\flex-config.xml
    ASCIIArt\AsciiArtBuilder.as(7): col: 45 Error:
    定義
    com.example.programmingas3.asciiArt:BitmapToAsciiConverter
    が見つかりません。
    import
    com.example.programmingas3.asciiArt.BitmapToAsciiConverter;
    ^
    ASCIIArt\AsciiArtBuilder.as(8): col: 45 Error:
    定義 com.example.programmingas3.asciiArt:Image
    が見つかりません。
    import com.example.programmingas3.asciiArt.Image;

    inlineblue you are right about the "-locale" switch. I've
    just found this page on live docs:
    http://livedocs.macromedia.com/flex/2/docs/wwhelp/wwhimpl/common/html/wwhelp.htm?context=L iveDocs_Parts&file=00001500.html
    with all the compiler options
    I thought that "-metadata.language <code>" (alias
    "-language") sets the language, but it seems that it's only for
    metadata.
    So -locale is out. Thanks for clearing this for me. There's
    one more path left...
    As I wrote in my first message, besides the "-locale en_US"
    compiler option, I am also setting the "user.language" flag in
    jvm.config to "en":
    -- C:\Program Files\Adobe\Flex Builder 2\Flex SDK
    2\bin\jvm.config --
    # Arguments to VM
    java.args=-Xmx384m -Dsun.io.useCanonCaches=false
    -Duser.language=en
    According to the docs:
    http://livedocs.macromedia.com/flex/2/docs/wwhelp/wwhimpl/common/html/wwhelp.htm?context=L iveDocs_Parts&file=00001462.html
    this is the standard (only?) way to pass arguments to the JVM. And
    AFAIK "-Duser.language=en" is supposed to set the user language to
    English. But it does not happen... I have to investigate this
    more...

  • Questions about the T410s

    Hey guys,
    I'm considering buying the T410s because my last laptop was a Dell XPS and the GPU burned down after two years. I am a college student and I use my laptops quite extensively for homework, flash games, TV and movies. And I have a couple of questions about the T410s.
    1. Due to my previous experience with my Dell XPS, I am looking for a more reliable laptop. So would I have to worry about the T410s heating up/burning down or breaking in like two years? 
    2. I am not much of a gamer, but enjoy videos sometimes. Will the Intel graphics card be able to run 'not so intense' games like Starcraft 2?
    3. Also, would the 4gig of RAM be sufficient to run the Windows 7 64bit smoothly or I should choose the 32bit instead? 
    Thanks!!
    Solved!
    Go to Solution.

    1) your Dell XPS used the Nvidia GPU? That won't happen in the new T410s.
    2) the Intel 5700 MHD GPU can handle 1080p easily, but games like Starcraft 2 may only played on low to med settings.
    the Nvidia GPU Optimus GPU option would allow 4 LCD support through the dock, if you ever want to connect that many LCD in the future.
    3) 4 gigs is fine for 64 bit OS.
    Regards,
    Jin Li
    May this year, be the year of 'DO'!
    I am a volunteer, and not a paid staff of Lenovo or Microsoft

  • A question about the example "Filter"

    Hi,
    I have a question about the example "Filter (The Filter example illustrates how to filter data using a butterworth filter)" in the measurement studio reference now, it is one of the analysis examples.
    I load this example in Vc++, but when I compile it, the error messages are:
    "'ButterworthHighPass' : is not a member of 'CNiMath'" ,
    "'ButterworthHighPass' : undeclared identifier",
    "'ButterworthLowPass' : is not a member of 'CNiMath'" ,
    "'ButterworthLowPass' : undeclared identifier",
    "'WhiteNoiseWave' : is not a member of 'CNiMath'" ,
    "'WhiteNoiseWave' : undeclared identifier",
    Can you tell me what is matter? and how can I solve it?
    Thanks!

    Hi,
    I was hoping that you could tell me what version and edition you have of Measurement Studio. I also need to know if you are using .NET or 6.0. For example, "I am using Mesurement Studio Enterprise edition 7.1 for Visual Studio .NET."
    Depending on the version that you have, different functions and controls are included. I believe that you may have an edition that does not include the Butterworth filter. Let me know and we can go from there.
    Thanks,
    Caroline
    National Instruments
    Thanks,
    Caroline Tipton
    Data Management Product Manager
    National Instruments

  • The question about the sharepoint server 2010 install

    Hi Friends,
    i have a question about the sharepoint server 2010 install. 
    my computer is used the windows server 2008 service pack 1. in order to install the sharepoint 2010 server, i need to choose to windows server 2008 service pack 2. my question is when i install the windows server 2008 service pack 2,whether the inside
    of my computer  information will be lost or change? 
    thank you in advance. 
    Qearl

    Hi ,
    No data will be lost either from your Windows program files or other drives as long as it is an upgrade.
    After upgrade you will still be able to see your old program files under windows.ol folder in the C: Drive of the new OS.
    The data will be lost only when you perform a clean install like complete formatting the HArd disk and installing from scratch.
    As mentioned it always good to maintain a backup preferable important files in a skydrive as there is a good chance of external drives crashing.

  • Question about the chain step name in DEFINE_CHAIN_STEP

    I have questions about the chain step name in DEFINE_CHAIN_STEP:
    1. Can the step name be a number (e.g. "8")?
    2. Should the step name be unique within a chain or across all chains?
    I am having this exception:
    ORA-25448: rule DMUSER.RULE_6_3707 has errors
    ORA-22806: not an object or REF
    After I changed the step names (in DEFINE_CHAIN_STEP), the chain seems to run fine.
    Thanks,
    Denny

    The reason I asked about the step name is to confirm it can handle numbers (it looks it can handle it from the doc).
    Why I changed the step names say from "11" to "21", the error goes away, that puzzled me. Because the way I defined steps and the rules for the steps were exactly the same. Just changing the step names made the error goes away?!
    Thanks.

  • 3 questions about the evalution license ?

    Hi - I have some questions about the Weblogic Server Eval license.
    Before I start let me just say I'm not trying to rip BEA off, I just
    want to know what's possible.
    1. Firstly what happens after the 30 days does the server just not
    work or only work in a restricted form ? If restricted, how so ?
    2. I read that the eval edition will only access 3 unique IP
    addresses. I intend to have WL running on a RedHat linux box whilst
    the pages are served by IIS on a W2K box (both machines are on our
    internal LAN). Am I going to be able to do this with the eval license
    ? I'm not quite sure what the 3 IP addresses refer to ...
    3. Do I need anything super-strong in the way of a Linux box to run
    this on ? I've got an old Pentium with 32Mb of RAM in it. I can't see
    a "minimum spec" on the BEA site. Bear in mind it's not to do any
    "real" work just to give the thing a run around the block ?
    4. When the Eval license is dead what's the minimum amount a small s/w
    house would pay for a licence to develop under (US (or anywhere)
    prices will do I just want a ballpark).
    Sorry that was 4 questions ;-). I'd appreciate any information you
    have to share.
    Thanks
    Richard Shea.

    1)The server won't start if the license expires.
    2)The 3 unique IP'S refer to the number of clients that can access the
    server. It means that WLS will server requests coming from 3 different
    ip's at most. A request coming froma 4th client with a different ip will
    be rejected.
    3)I guess 32 MB's is relatively less The default scripts always use 64 MB
    exclusively for the JVM . Having 32mb RAM means that a part of it will be
    used by t he Operating System and other Applications. You might experience
    OutOfmemory errors and slow performance
    4)email [email protected] and they should be able to handle this
    Yeshwant
    Richard Shea wrote:
    Hi - I have some questions about the Weblogic Server Eval license.
    Before I start let me just say I'm not trying to rip BEA off, I just
    want to know what's possible.
    1. Firstly what happens after the 30 days does the server just not
    work or only work in a restricted form ? If restricted, how so ?
    2. I read that the eval edition will only access 3 unique IP
    addresses. I intend to have WL running on a RedHat linux box whilst
    the pages are served by IIS on a W2K box (both machines are on our
    internal LAN). Am I going to be able to do this with the eval license
    ? I'm not quite sure what the 3 IP addresses refer to ...
    3. Do I need anything super-strong in the way of a Linux box to run
    this on ? I've got an old Pentium with 32Mb of RAM in it. I can't see
    a "minimum spec" on the BEA site. Bear in mind it's not to do any
    "real" work just to give the thing a run around the block ?
    4. When the Eval license is dead what's the minimum amount a small s/w
    house would pay for a licence to develop under (US (or anywhere)
    prices will do I just want a ballpark).
    Sorry that was 4 questions ;-). I'd appreciate any information you
    have to share.
    Thanks
    Richard Shea.

  • I got an answer and I replied with a question about the answer, does no show in unanswered

    I got an answer and I replied with a question about the answer, does no show in unanswered questions. I guess replying was not the way to get another anwer, How do I do that?
    He said - Certain Firefox problems can be solved by performing a Clean reinstall. This means you remove Firefox program files and then reinstall Firefox.
    I want to know - Will I still have my bookmarks, history, addons, plugins, etc.? I do not know what plugins and such that I had. What about my pinned tabs and my tabs that where open.
    More information - When I try to start Firefox I keep getting the message that I need to restart my computer in order to complete a previous update attempt. I had Sweetpacks on my PC and I do not know where it came from, it took over my home page in Internet Explorer and Ithink caused the issue with Firefox.
    Should I do the clean install or try starting Firefox now.

    Could you please stay in the thread where you posted the question and reply there instead of opening a new thread?
    Locking this thread, so please continue here:
    *[[/questions/968194]]
    See also:
    *[[/questions/968222]]
    You won't lose bookmarks and other data in the Firefox profile folder as long as you do not remove personal data in case you uninstall Firefox.
    See also:
    *http://kb.mozillazine.org/Profile_backup
    *https://support.mozilla.org/kb/Backing+up+your+information
    You can open the Properties of the Firefox desktop shortcut via the right-click context menu and check the "Compatibility" tab.<br />
    Make sure that all items are deselected in the "Compatibility" tab of the Properties window.

  • Dear Customer Service Team,  I bought a twelve-month Dreamweaver CC program with monthly payment that I have paid via bank transfer and there would be a question about the activation. How could I get the license key with which I can activate my account? I

    Dear Customer Service Team,
    I bought a twelve-month Dreamweaver CC program with monthly payment that I have paid via bank transfer and there would be a question about the activation. How could I get the license key with which I can activate my account? I can not find it and now I only have access to the trial version.
    Thank you for your help in advance.
    Kind Regards,
    G. Zsolt

    There is no serial number require for Creative Cloud products, you may activate the products using your email address and password which is associated with Adobe. If your Dreamweaver asking for serial number, then make sure you are signing in with correct email address.
    You may also refer below link
    Sign in, activation, or connection errors | CS5.5 and later

  • Muvo V200, question about the play m

    Hello,I have a question about the play mode on my V200. I want to play the songs in a specific order (like in a playlist) but I don't find the way to do this. Can you help me please ?
    Thanks
    (sorry if I don't speak english very well, but I'm french )

    Hi!
    To get the tracks to play in a specific order, put numbers at the beginning of each file name. E.g.: file 'examplesong.mp3' would become '0_ examplesong.mp3' Don't spend years doing that manually though; the computer will do it for you! Click on 'my computer', then click on 'Muvo V200 media explorer'.. This shows the contents of your player. Choose the folder that you want to reorder the songs in...
    ( it's best to put the songs in folders, like you would in a floppy disk, as the muvo can only hold a certain amount in the root directory, and folders are great for organisation - eg: you can put one CD in each folder, and then the player will play all of the tracks in that folder before moving on to the next one )
    ...and click on it to display the songs. In the pictures along the top of the window, 4th from the right is an icon with a downward facing arrow and an A above a Z. Click on this, it's called 'custom sort'. You can then use the arrows at the bottom to change the order of your tracks to how you want them. Click OK, and they'll all be numbered (and so will play) in that order.
    Hope that helps!
    x

Maybe you are looking for

  • Can I boot 10.5 from an external hard drive?

    Hi Folks, I thought I was able to create a bootable external firewire hard drive containing Mac OS X 10.5 but having no luck. I would like to be able to test some legacy software on it and cannot get it to even boot. I have an 80 GB external drive wi

  • I it possible to get a refund if you don't like the app you bought

    Is it possible to get a refund on an app that you bought and didn't like

  • Calculating 2 fields without a script error.

    Is there a way to make a calculation of two fields not calculate until the 3rd field is reached.  I have a calculation that takes (field1/field2)*100.  Once the user puts in field1, it throws a script error, which is annoying.  Anyway around this???

  • Java Desktop System User Menu

    Hi I'm having some problems ordering a menu in JDS3. I have 3 groups of applications, each application with it's own .desktop file with categories X-Application, X-Convert or X-Utility depending on the group. What I'm after is a menu with X-Applicati

  • Interactive–Fade In / Fade Out

    I am working on creating an interactive map. When a button is clicked a circle graphic fades in. When the same button is clicked I want the graphic to fade out the same way. I can only figure out how to make the graphic instantly disappear instead of