Flash projector x-platform maddness-- Can't "show extension" in Mac OS
Hi has anyone else seen this one? Outputting flash projectors from CS4. No problem, in running the mac version on my platform. The issue is that when my associate emails the projector file from the PC it turns into a folder. I've tried to "unhide" the extension in the mac info pane (Snow leopard and Leopard) but the I can't unclick the "hide extension". The best solution I've been able to come up with is to add ".hqx" in the file name which automatically then show the ".app" extension even though the "hide extension" is still toggled on and is greyed out (not selectable)...
Is there a better solution?
thanks
hi 856105
Just based on the information you provide, when you ...
... tried to just run the ojdeploy under#HOME/Oracle/Middleware/jdeveloper/jdev/bin/ojdeploy in terminal ...... and that resulted in the message ...
... Type the full pathname of a J2SE installation ...... have you tried to "Type the full pathname of a J2SE installation " ?
(tip : You can use "Your Control Panel" to make your name visible in forum posts.)
regards
Jan Vervecken
Similar Messages
-
How can I show On My Mac on my laptop
How can I show On My Mac on my laptop?
Thanks
dlblissDo you mean either of these?
Particularly Find My Mac?
OT -
I play l many games on facebook, which I can't now because they want me to upgrade to adobe flash player 14, my version will not allow me to, Do I need to purchase snow leopard, then upgrade to maverick in order to get flash player 14 to work?
You need to upgrade to Snow Leopard, but don't need to go past 10.6.8 to run the current version of Flash.
(110643) -
CS4 Flash Projector in Mac OS X Lion
I sell products which run using Flash Projector that were created with the CS4 Flash Projector and am getting complaints that they no longer work on Mac OS X Lion. I've read the Adobe Knowledge Base article about known issues (http://kb2.adobe.com/cps/905/cpsid_90508.html) but Flash Projector is not mentioned. I cannot upgrade my Mac to Lion yet for various reasons, so I cannot test the problem. Can anyone shed some light on this issue?
Cor-el - - Thanks! this looks like it has some good clues, BUT, in following up, my Library doesn't show me any .plist with .mozilla. in the filename. Am running Mac OS X Lion (10.7.2). FYI - The Library is one of only four (4) folders in the root level on the system partition; the system partition being labeled, Mac Mini HD. These four folders are, Applications, Library, System, Users. Library folder has a subfolder named Preferences. None of the files therein has "mozilla" anywhere in the filename. Looking further, the System folder has its own subfolder labeled, Library! It has no subfolder, Preferences. Running a Finder Search on the Mac, and again on the Mac Mini HD (root folder), I get Zero (0) results with "org.mozilla.firefox.plist." Also, with Contains ".mozilla" and with Contains ".firefox.".
Will greatly appreciate a bit more hand-holding from you, if OK with you.
. -
Starting a flash projector from terminal
Hi everyone,
i have the following problem and it drives me mad. I´m
developing a Flash game which retrieves data from a java Server.
For presentation I have both things, the server and the
Flash-Projektor on the same Computer. What I want is: Both
programms startet with on click (one doubleclick :-) ) so I tried
to start the server using fscommand but since the Server is a never
stopping Thread, Flash blocks and waits for the application to
end...which will never happen. So my new try is to start the Flash
projector from tha java server interface via runtime.exec();
everything I need now is what I have to enter in the Terminal
(using OSX!) to start a Flash projector. I just can´t figure
it out.
Another thing would be: it doesn´t have to be a
projector...could be normal swf also...then start it with a
standalone player...but same problem: how do i start a standalone
player from the terminal giving it the file he should open? Are
there parameters I can pass to it? Anybody? Help!!!ok well you might be able to solve this by exectuing an
AppleScript
from the terminal, I don't rememeber the exact command but it
can be
done.
You might also consider creating you app with mProjector for
OS X, it
adds many new commands into Flash including and openDocument
command
and an executeApplication command. It also allows you te
create
multiple window applications via a createWindow command - so
you may be
able to do what you need to in one application. Oh yeah and
there are
Flash Shaped windows, sometime very cool for games...
check it out the calls mentioned a all here on the API docs
page
http://www.screentime.com/software/mprojector/docs/index.html
Download the demo, it will installed the mProjector classes
right into
flash. Export your swf build the app in mProjector and away
you go..
John Pattenden
Screentime Media - Flash Tools since 1997
http://www.screentime.com -
I connect my macbook pro to an Epson wireless projector. The macbook can see the projector wirelessly and the image on the macbook is displayed on the projector. However on system ref., the arrangement tab does not show and thus cannot have multiple view.
I am trying to project Pro Presenter on the Epson projector such that I have the detail screen on the macbook and only the screen I want people to see on the projector display. This has not been possible because the arrangement tab on the Display section of the System Preference is not showing. If i tried to search for the arangement, it comes back with the message that there is not other source detected, hence the arrangement tab is not showing.
I have also tried to connect the Epson directly to the Macbook but it still the same result, so its not because it is a wireless connection. Can someone advise me jhow to go around this problem. I have used windows before and it is very easy to extend ptojection on windows, but this system seems to be frustrating to me.
Thanks,
ToksHi Toksyb!
You may want to try clearing out the PRAM on your computer. This process is explained through this article:
About NVRAM and PRAM
http://support.apple.com/kb/ht1379
Thanks for using the Apple Support Communities!
Cheers,
Braden -
Can we show flash screen over the loaded HTML5 page in StageWebView for IOS?
Hi Guys,
I want to show flash screen(let say abc.mxml) over loaded HTML5 page in StageWebView. But unable to show it. Even I want to interact with both pages ( flash and HTML5) bidirectionally.
Can anyone help me out of this StageWebView issue?
Thanks,
MamtaOkay. I guess it's not possible?
Seems like the closest way to get there would be the UIwebview Native Extension. But the examples on the website are pretty vague as to it's use. (at least for a non-C coder like myself)
Anybody use that particular ANE? Anyone? Bueller? Bueller?
Again, just need to set a simple property here... -
Can I show a MS Word document from an Air to an LCD projector?
I find I can display a Powerpoint using an LCD projector, but if I try to show a MS Word document, I don't see anything on the display screen. Is there some trick to this?
According to this thread in Microsoft's forums:
http://answers.microsoft.com/en-us/mac/forum/macoffice2011-macword/can-i-how-do- i-add-a-digital-signature-to-a/eb2c2787-b13f-4388-b20f-4580515eec95
this is not possible with Word for Mac.
Regards. -
Hi. Please can anyone show me how to install a flash document / movie into a powerpoint presentation so that the animation plays within the powerpoint? Thanks
wouldn't it make more sense that a flashtard is someone who
just generally sucks at flash and asks idiotic questions?
anyway, so i pretty much got the banner done - but i'm stuck
on one problem. I made a motion clip of a heart, and i want the
heart to fall from top to bottom, following a squiggly motion
guide, and to rotate 1/4 turn on the way. I got it as far as
following the motion guide, but when i try to select the instance
in the first frame and rotate it, shouldn't the motion tween make
it appear to slowly rotate, rather than stay put then rotate 1/4
turn at the last frame? When I select the clip and play around with
alpha and stuff, that works fine. What the heck? -
Can I show a higher resolution on my laptop screen than on a connected (VGA) projector?
The projector is only 800 by 600 which screws up my desktop each time I project.
Additionally - if I use a remote desktop client for windows, the change in resolution makes the projection in windows unreadble.
Anything I can do?
Many thanks - MikeWill not work, most likely for BootCamp. Windows drivers for hunderbolt will only create digital (DVI), not analog (VGA).
Run Windows in Parallels/other-VM-software where OSX runs the Thunderbolt port, or by a USB-VGA adapter. -
Flash Projectors-distribute on CD
Hello. I am hoping someone can answer a question for me
regarding Flash Projectors.
We are trying to build something for CD use and are running
into a problem when trying to view them on Mac OS X machines. It
seems that unless the user as admin rights on the machine the file
won't open. Instead the error "You do not have permission to open
the application "app name" " appears instead. If I log in as an
admin user the file open fine.
Flash player is not installed on the test machine (as I was
told it isn't necessary because this is a projector file). The
non-admin user does have appliction restrictions set in the
Accounts area but there isn't anything not allowed that seems
obvious to me.
Can anyone give me a clue as to what is going on here?
Any help would be greatly appreciated.The application is the Projector file. It can be named
anything you want. It doesn't matter.
Yes, there is a separate Projector file for each platform.
After playing with it some more I know is has something to do
with the application restrictions in the Parental Controls area of
the restricted account. If I leave the account type as "managed"
but don't restrict any applications it works fine. However, I can
never be sure that the end user is going to be setup that way or is
an admin on their machine. I have to account for all situations but
I don't know why things are being locked out.
I'm guessing this is happening because the Projector file is
an actual application itself and is not checked as being acceptable
in the Parental list (it doesn't even show up) for that user but
there has to be a way around this. I'm sure there are many CD's
distributed out there with something similar. I just don't know how
to make it work. -
TransitionManager in FLASH Projector
Hey guys,
I seem to be having a problem with the TransitionManager effects in Flash Projector flash...
I have the following code snippet in an AS3 .AS file
for each(item in list){
//trace(("site/phones/samsung-880/samsung-880-thumb.png").search(/\w-(thumb)/g));
//trace((.search(/\w-thumb/g) != -1)).toString());
dp.addItem({label: item.title, source: item.thumbimage});
mediaViewer.addEventListener(ComponentEvent.SHOW,function(){var t:TransitionManager = new TransitionManager(mediaViewer);
t.startTransition({type:Zoom, direction:Transition.IN, duration:7, easing:Elastic.easeInOut});});
mediaViewer.visible = true;
mediaViewer.loadMedia(dp);
Where mediaViewer (a movieclip on the timeline) is a TileList component that I extended and...when visible = true Will do a Zoom in transition. The problem is that while the above code works fine in a SWF file it doesn't in the EXE file. The component is not shown nor is there any transition taking place. If I remove the Transition effect it works as expected. What can cause this? A bug perhaps?It seems that I needed to put and instance of the tile list component on the timeline inorder for it to get rendered.
-
Can I show a presentation from my iPad
If I create a presentation using Keynote on my iPad, can I show the presentation on a screen using the iPad, or do I need to save it to a laptop or pc to do so?
In theory, yes. You'd need an adapter to get from your iPad to whatever input the projector has (likely VGA, that's the most common, or some projectors have DVI inputs)
THat said, the most foolproof and compatible would be to get it on a laptop, either one your bring or one the recipients provide. I've seen people make the iPad out to projector work, but they need to be proficient on how it works, most tech support - if the place has any - doesnt' do much with iPads so isn't really familiar with them.
I've worked tech support for many meetings and conventions the laptop to VGA is the most common and easy to work with.
In your case, make it on your iPad, export it from keynote in a format compatible with powerpoint, (ppt or pptx file) and e-mail it to yourself and save it to a flash drive or a laptop from there.
You can play with exporting directly but I'd have the other as a backup just in case. -
Can you show slideshow within Lightroom 4.4 in Adobe RGB color space?
Can you show slideshow within Lightroom 4.4 (not export out from LR) in Adobe RGB color space provided that you are using a wide gamut monitor which is capable and hardware calibrated & profiled to show such color space?
If this is possible, what is required to do so in Windows 8 and i7-4770 & HD Graphics 4600 platform or does LR take care of it automatically?
This is very basic question, however, I could not find a clear answer/info from LR documentation, so wish that someone can advice.Those settings are probably stored in a plist somewhere in ~/Library/Preferences. If you can locate the appropriate file, you should be able to copy it to all the network user folders.
-
Can you "lock" a flash drive so that it can't be written to - on XP too?
Hello!
I've got a 2 GB flash drive full of music, numbered and in playlist order, which I like to use with the school lab computers when I don't have my Powerbook or iPod with me. The lab computers run both Windows XP (mostly) and Mac OS X 10.4.X Tiger. I'd like to be able to lock this flash drive, so that it can't be written to when attached to another computer (without a password, at least). iTunes (on the lab machines) will play music from this flash drive, but if I should accidentally delete a song, or have it "keep the iTunes folder organized" - it will rename all of the playlists or delete the song files. This is annoying.
My first thought was to make a .dmg image/volume on the drive via Disk Utility, but that won't work with windows machines. Is there any way to lock this flash drive? It does not have a hardware lock feature. If possible, i'd also like it to work with OS 9.2.2 - but this is most definately not required.
Thanks,
-DanielWithout a hardware lock I dont think there is a way to lock the drive cross-platform. You can lock all the files on the drive, which will prevent them from being modified, but that's only a superficial lock, as the "lock" checkbox can be edited in both windows and OS X.
Maybe you are looking for
-
Hi Can we create a material type for raw material where the Sales view will be activated. Regards Soumen
-
Can I use Airport Express for one laptop to use another's connection?
I'm at a hotel with my MacBook Pro connected and on the Internet. I would like my wife to be able to use her MacBook Pro using my internet connection. Can I plug in my Airport Express into my laptop and have her use my connection somehow? Thanks.
-
When i made an in app purchase, I was told that I cannot connect to itunes store. I then checked my account, and it still charged me for the purchase, even though it failed. What do I now do?
-
Is there a way to make Mailbox automatically update as soon as you get new mail?
I just got an iPhone 4, and I noticed that my mailbox only updates when I open it, even if I received new mail since I last checked. Is there a way to make it automatically update when I get new mail in my inbox? There's sort of no point to alerting
-
Moving over seas and taking my iPhone with me?
My wife and I are considering a move to Europe and I am curious if anyone has taken their iPhone (3G, v3.0) to Europe and had a new number installed on it. We're not interested in AT&T's "international roaming option" with a US number, we're talking