Flash recovery area issue. I can not open the database??
Hi all
I am using oracle 11.2.0 .1.0 on windows
when i tried to start the database I got the following error.
ORA-03113: end-of-file on communication channel
I clear out all information in Trace file. I cleared out all operating system level audit trails. then i deleted archivelog files using operating system level delete. still my database is not opening???
I tried to start this using RMAN but got the same error. now i have deleted the files from flash recovery area how can i let oracle system to know that those are deleted and there is enough space. Rman does not execute crosschek commands at mount state of the database?
Need solution.
Regards
MAlik
malikdba wrote:
the last option which ask to delete the files. i already have deleted the files at operating system level. now the issue is how to let the system that the space is free in flash recovery area? rman is not running crosscheck command at mount stage of the target database. What steps should i follow now?
Thanks
malik
Are you saying you are getting an error while trying to crosscheck at mount? Or you simply don't believe it will work?
oracle:orcl$ rman target /
Recovery Manager: Release 11.2.0.2.0 - Production on Thu Jul 11 10:52:48 2013
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
connected to target database (not started)
RMAN> startup mount;
Oracle instance started
database mounted
Total System Global Area 839282688 bytes
Fixed Size 2231128 bytes
Variable Size 503317672 bytes
Database Buffers 331350016 bytes
Redo Buffers 2383872 bytes
RMAN> crosscheck archivelog all;
using target database control file instead of recovery catalog
allocated channel: ORA_DISK_1
channel ORA_DISK_1: SID=18 device type=DISK
specification does not match any archived log in the repository
RMAN>
A perfectly normal crosscheck at the mount stage
Similar Messages
-
I have a G5 mac using ver 10.4.11 and a newer mac using ver 10.8.4 these are networked. using the new mac i looked up my my photo on the old mac. It then said you need to upgrade your library which it did. Now the old mac can not open the photos and say that I need to upgrade my I photo to a newer version. The old mac has no more support from apple in software update so I am not sure where I should go from here. can I use new soft ware with the old mac
The other part of the upgrade message was a warning that once you upgraded you would no longer be able to open the library with the old version which is exaclty what you did and what happened when you choose to continue
The iphoto library needs to be upgraded to work with this version of iPhoto. Your photo library will not be readable by previous versions of iphoto after the upgrade. The upgrade process may take several minutes depending on the number of photos in the library. Cancel or upgrade.
So now your choices are to not use iPhoto with the previous version using it onky with the newer version, restore your backup from before you did this upgrade or purchase iPhoto Library Manager and use it to rebuild the library using the older version of iPhoto (instructions are on their web site) thereby downgrading it (without projects)
LN -
I recently upgraded to a G5 and Logic Pro 8. My previous system was a Power Mac 7200 with Logic Platinum 3.5.3. I can not open the old song files unless they are first saved in Logic 6 or 7. Where do I get a dongle for Logic 7?
eBay or Craigslist would be the only choice.
-
Pages is not saving document correctly. After saving the changes either do not appear or you can not open the file. The error is "not a valid format" I am in Pages '09 4.1 (923). I also use Parallels. Anyone having similar issues?
I'm not sure that Lion AutoSave feature apply to network servers.
I'm just sure that the Versions feature doesn't.
Yvan KOENIG (VALLAURIS, France) samedi 21 janvier 2012
iMac 21”5, i7, 2.8 GHz, 12 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.2
My Box account is : http://www.box.com/s/00qnssoyeq2xvc22ra4k
My iDisk is : http://public.me.com/koenigyvan -
About 1356 ERROR:pifreg:can not open registry database error
I test the simpsver using simpclw run on the same machine, the simpsver seen to
run normally. After config the correct network option,I test the simpsver on the
different machine using simpclw, now I get the "1356 ERROR:pifreg:can not open
registry database error" ,the action bea suggested is "Make sure that the directory(default
TUXDIR/udataobj) is not on an NFS mounted filesystem that does not support file
locking", but in fact bea client is installed on a local file system (ext2)!malikdba wrote:
the last option which ask to delete the files. i already have deleted the files at operating system level. now the issue is how to let the system that the space is free in flash recovery area? rman is not running crosscheck command at mount stage of the target database. What steps should i follow now?
Thanks
malik
Are you saying you are getting an error while trying to crosscheck at mount? Or you simply don't believe it will work?
oracle:orcl$ rman target /
Recovery Manager: Release 11.2.0.2.0 - Production on Thu Jul 11 10:52:48 2013
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
connected to target database (not started)
RMAN> startup mount;
Oracle instance started
database mounted
Total System Global Area 839282688 bytes
Fixed Size 2231128 bytes
Variable Size 503317672 bytes
Database Buffers 331350016 bytes
Redo Buffers 2383872 bytes
RMAN> crosscheck archivelog all;
using target database control file instead of recovery catalog
allocated channel: ORA_DISK_1
channel ORA_DISK_1: SID=18 device type=DISK
specification does not match any archived log in the repository
RMAN>
A perfectly normal crosscheck at the mount stage -
I can not open the breakpoint dialog in upper right next to plus sign.
EDIT: After more digging into the issue, I found out that the trick is to click AND HOLD on the upside triangle to access the breakpoint dialog box. See link --> Adobe Edge Reflow Team Blog | Q & A From “Talk To The Team”
I can not open the breakpoint dialog in upper right next to plus sign. I click on the downward triangle with no success. Is there a trick to getting this to open? Or better yet, is there a hotkey?
Thank you for your help-
Shawn
Message was edited by: Shawn RossiWithin Photoshop go to the "About Plug-in…" menu item just below "About Photoshop" to find the Camera Raw version number. On which menu that is depends on your platform, Macintosh or Windows, which you neglected to mention.
Raw files from your camera have been supported since version 2.0 of Camera Raw for years and years, so it's not a question of your version of ACR. Any version of ACR that runs in CS5 should open those files.
I suspect your raw files are damaged (corrupted). -
why can not open the file
On which OS are you working?
Did you see issue in opening pdf in browser or in Application?
You can try upgarding to latest version of Reader via link
http://get.adobe.com/reader/enterprise/ -
Can not open the app store on my mac since new update
can not open the app store on my mac since new update
Here are some suggestions for getting the best results from this site.
Create a user profile that accurately reflects the type of hardware you're using and your version of OS X, or include that information in your first message.
Give details of the problem. A remark such as "X doesn't work" conveys no useful information. If X did work, you wouldn't be here. Instead, you should post something like this: "I did A; I expected B; but I got C." Include the complete, verbatim text of any error messages you saw, and specify where you saw them: in an application window, a CrashReporter window, a log, or whatever.
Also describe the steps you’ve taken yourself, if any, to try to resolve the issue. If the problem is of recent origin, did you make any changes to your setup just before you first noticed it? Is the problem reproducible or intermittent? That is, does it always manifest itself when you take a certain action, or only at unpredictable times?
Before posting, ask yourself whether it’s likely that you are the the only person ever to have had this problem. If not, search the discussions for answered questions similar to yours. If you found any pertinent information, but it didn't help, give details. -
hi i had a perfect account with itune all of a sudden stoped and constantly a message coming up can not open the page and since then i tred to change my password still cant buy any song please sort this out
thank you
rico jafarianMike,
Are any of your other applications going wonky, or is it just Logic?
I'm afraid I've never heard of this particular problem before, but if it were happening to me the first thing I would do is delete my "com.apple.logic.express.plist" file in Library>Preferences, then repair permissions in Disc Utility, and finally restart my computer. Then I would launch Logic and see if the problem has been corrected. It's amazing how much these two steps can accomplish.
If that doesn't resolve the issue I would launch Logic and go to Preferences>Audio Units Manager to see if all my plug-ins are properly validated. -
Why my iphone screen can not open the key and can not enter the menu
why my iphone screen can not open the key and can not enter the menu
Your issue is not clear - are you saying your phone is disabled and/or you forgot the passcode?
http://support.apple.com/kb/ht1212 -
I can not open the history even of today and see
5/8/10
Dear ladies and gentlemen,
• I thank you all each and every person, ladies and gentleman who are connected with Mozilla Firefox in any manner and who have contributed for its development and any other who is in any way even concerned and every well wisher of Mozilla. My good wishes for all of them and for their work that it has become so popular and every one of them has laboured selflessly and without any money angle for that and that is the best thing. Such selfless work must be appreciated by each and all.
• My earlier suggestion for accepting cheques from those who like me do not have any cr. card has still not been accepted.
• You please incorporate features from other good programmes as these are still not there in FireFox and I am using only this since when I first installed it and I do not intend to use any other but these features as I remember were available few years back are still not there in Mozilla so today there should be many more features which can be incorporated in Firefox.
• When the connection is on but not opened i.e. the connection has been switched on but not opened i.e. the modem lights are on and not off then if I go back to a page opened then the Firefox shows loading problem but if I switch off the modem then I can access that very same page. This should be taken care of so that even if I switch on the modem but the connection is not on even then I should be able to see the page 1 or 2 or many pages backwards.
• Then I can not open the history even of today and see that page whereas earlier I could click any history page and it showed even if it was 5 days old (which is my setting) and I have not changed any setting.
• I also thank the all add-on creators because I have installed very few but even then these are very useful.
• I would also suggest that you incorporate these add-ons in the FireFox itself for example I suggested many moons back that let there be a system of any number of tabs being opened (and a few more suggestions) and it is available as add –on in tab mix plus which I have now installed.
• I also request to everyone concerned to give his ideas as to what other features can be incorporated in Firefox and these suggestions be on your website and after a certain number of well wishers and users select the idea you please either develop it yourselves or any well wisher can do it and then it can be incorporated in the Firefox.
• I also give you my suggestion which is not available presently to my knowledge in the browser or add-ons this is that if I move a window in tab mix plus then it is always in a window for each tab but instead of that my suggestion is that I should be able to move any no. of tabs or any other tab to one particular window only and that too in any manner I like in any sequence like at a particular No. of tab say 15th etc.
• I also feel presently having some problem that when I shut down the computer after save and quit pages that are there are not reopened. Loading problem in those pages appears I do not know the reason but Firefox should be able to show all the last page/pages/window/windows I was perusing after I saved and quit.
Thanking you,
Best wishes for all of you.
Yours sincerely,
DSHi,
Please provide more details about your computer along with the graphics card. Also, A log file might help identify the cause of the crash. Please right-click 'My Computer', select "Manage," look under 'Event Viewer->Windows Logs->Application' to see if there's an event there from Premiere Pro. If so, copy the contents of that log and paste them here.
Thanks,
Rameez -
This issue is that i can not open the form ,I checked the application.log,find erro:
09/04/24 12:21:50.201 10.1.3.0.0 Started
09/04/24 12:21:51.470 formsweb: FormsServlet init():
configFileName: /oracle/prod01/inst/apps/PROD01_erp199/ora/10.1.2/forms/server/appsweb.cfg
testMode: false
09/04/24 12:21:51.479 formsweb: 10.1.3.0.0 Started
09/04/24 12:34:28.975 formsweb: ListenerServlet init()
09/04/24 12:34:30.17 formsweb: Forms 会话 <1> 在启动过程中失败: 没有来自运行时进程的响应
09/04/24 12:34:30.17 formsweb: Forms session <1> exception stack trace:
oracle.forms.engine.RunformException: Forms 会话 <1> 在启动过程中失败: 没有来自运行时进程的响应
at oracle.forms.servlet.RunformProcess.connect(Unknown Source)
at oracle.forms.servlet.RunformProcess.dataToRunform(Unknown Source)
at oracle.forms.servlet.RunformSession.dataToRunform(Unknown Source)
at oracle.forms.servlet.ListenerServlet.doPost(Unknown Source)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:763)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.ServletRequestDispatcher.invoke(ServletRe
questDispatcher.java:702)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.ServletRequestDispatcher.forwardInternal(
ServletRequestDispatcher.java:359)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.HttpRequestHandler.doProcessRequest(HttpR
equestHandler.java:870)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.HttpRequestHandler.processRequest(HttpReq
uestHandler.java:451)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.AJPRequestHandler.run(AJPRequestHandler.j
ava:299)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.AJPRequestHandler.run(AJPRequestHandler.j
ava:187)
at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].util.ReleasableResourcePooledExecutor$MyWorker.run(Re
leasableResourcePooledExecutor.java:303)
at java.lang.Thread.run(Thread.java:595)
here is another erro :
/oracle/prod01/inst/apps/PROD01_erp199/logs/ora/10.1.3/opmn/forms_default_group_1、formsstd.err
Error: <connector name="OracleASjms" path="OracleASjms.rar" /> will not be bootstrapped since corresponding module declarati
on was not found in application.xml.Thank you hsawwan ,I did it as your methods,and i also checked your thread,but I still have the same problem.
when I start the formserver ,here is the erro:
[[root@erp29 ~]# more /oracle/prod/inst/apps/PROD_erp29/logs/appl/admin/log/adformsctl.txt
adformsctl's LOG:
04/28/09-09:04:52 :: adformsctl.sh version 120.12.12000000.3
04/28/09-09:04:52 :: adformsctl.sh: starting OPMN if it is not running
opmnctl: opmn is already running.
04/28/09-09:04:55 :: adformsctl.sh: Starting OPMN managed FORMS OC4J instance
opmnctl: starting opmn managed processes...
================================================================================
opmn id=erp29:6200
no processes or applications matched this request
04/28/09-09:04:55 :: adformsctl.sh: exiting with status 150
================================================================================
adoacorectl's LOG
04/28/09-09:04:51 :: adoacorectl.sh version 120.11.12000000.2
04/28/09-09:04:51 :: adoacorectl.sh: starting OPMN if it is not running
opmnctl: opmn is already running.
04/28/09-09:04:51 :: adoacorectl.sh: Starting OPMN managed OACORE OC4J instance
opmnctl: starting opmn managed processes...
================================================================================
opmn id=erp29:6200
no processes or applications matched this request
04/28/09-09:04:52 :: adoacorectl.sh: exiting with status 150
================================================================================
adapcctl's log
04/28/09-09:04:51 :: adapcctl.sh version 120.6.12000000.2
04/28/09-09:04:51 :: adapcctl.sh: starting OPMN if it is not running
opmnctl: opmn is already running.
04/28/09-09:04:51 :: adapcctl.sh: starting OPMN managed OHS instance
opmnctl: starting opmn managed processes...
================================================================================
opmn id=erp29:6200
no processes or applications matched this request
04/28/09-09:04:51 :: adapcctl.sh: exiting with status 150
================================================================================ -
My OS is 10.9.3.I've been working on a document in Pages 4.3. Now is says I can not open the document unless I upgrade to Pages 5.2. The Pages 5.2 page in the App store says "installed" nor can I find a "purchase" or "install" button. How do I get Pages 5.2?
If you have already updated to Pages 5.2 on your Mac, you may be trying to open the file with a previous version of Pages. If this is the case, you have two versions of Pages on your Mac & are trying to open Pages 5 documents with Pages 4. Are you launching Pages from an icon in your Dock? Installing the update does not change the Dock icons & it does not remove the older versions. Go to your Applications folder & launch the new Pages from there then right-click on the Dock icon & select Options > Keep in Dock.
Installing new versions of iWork has never replaced existing versions. This is nothing new. The only thing new is that the '09 apps are moved to an iWork '09 folder if they were purchased from the Mac App Store. If they were installed from disk they should already be in a separate folder in Applications. -
I have a problem in activate Alaaclaud account and I can not open the device
السلام عليكمI have a problem in activate Alaaclaud account and I can not open the device
Standard troubleshooting...
Try a reset by pressing the home and sleep buttons until you see the Apple logo, ignoring the slider. Takes about 5-15 secs of button holding and you won't lose any data or settings.
If still a problem restore with your backup.
If still a problem restore as new, i.e. without your backup. See how it runs with nothing synced to it.
If still a problem, it's likely a hardware issue. -
Help...
I can not open the mac app store in any way from my mac book pro
please helpLaunch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
Maybe you are looking for
-
There have been about a half-dozen or so times in the past where the sound preferences on my Mac Pro reverted to the internal speaker. (If I'm remembering correctly it always seemed to happen when I was using Safari. Then, when I'd close Safari, I'd
-
Hi guru's, In customer expected price we raise the sales order with EDI1&EDI2 condition types.we specify either price or value.we save the incomplete document.we raise the delivery and billing.billing will be blocked due to price error.autorization p
-
Dispalying URL in Applet Window
Hi How can I display URL content in applet window separate from the browser. Thanks in advance
-
In IE I don't have the problem but in Firefox, when I open my yahoo mail and try to compose - that damn Bing search tool is right in the body of the email and I can't type an email. If I do type, my cursor size is the height and color of the Bing typ
-
when sending email through yahoo account , i cant upload any attachment with email, a sign of uploading lasts forever without uploading the file. this issue do not happen with hotmail account or when using IE to browse Yahoo account.