Flash shutting down when i test

Im working on a flash file whenever I test it to see how it
looks, flash shuts down after i close the flash player i just
viewed the test file in.
any solutions? Im in mac OS 10.47

Hi,
Try to re-install the program

Similar Messages

My Satellite laptop (A305) shuts down when run on the AC charger/adapter

The problem is that my Toshiba _A300 series laptop (A305) shuts down when you try to run it on the AC charger/adapter_. You can boot it with the power cord plugged in and it will get to Windows Desktop and maybe a few minutes more at most before shutting off.
It will boot and _run from battery without problem_, but if you plug in the AC while it is up and running on battery the machine will normally click off instantly and reboot to the message "Windows was not shut down correctly."
The _AC adapter works fine_ reading a steady 19.19 to 19.20 volts with a voltmeter. It also _charges the battery fine when the computer is off_. I have two Toshiba brand batteries and they both work fine.
One interesting thing is that the _computer runs fine on AC when in safe mode_.
I _did a reformat/factory restore_ of Vista to assure it was not software and drivers, and still got the same problem before any external devices had been plugged in.
It has the latest BIOS and I tried resetting it to default values in case anything had gotten changed. It made no difference.
This is _not a heating issue_ because _while it is run on battery I can watch long videos_ without it shutting off. I ran compressed air through the vents just to make sure, but it makes no difference in behavior. Usually with an overheating shut-off, the computer cannot be started until it has cooled some, but these shutdowns are accompanied by an instant reboot.
I have seen on some threads that this type of problem one can work around by disabling one of the processors in Device Manager, but I don't think that is much of a lasting solution or good for the computer.
Has anyone seen this problem before and have you come with a full diagnosis of the problem and a real solution?

I have Satellite A300 and until now everything works OK.
I would like to know what happen when you remove the battery and use notebook with power supply only. Does notebook shuts down again.
If not let OS run and put the battery.
Is the battery recognized properly? Does notebook switch off again?
To be honest I cannot imagine this issue has something with software or background processes. Recovery image you got with your notebook is designed for this certain notebook mode. Recovery image is tested and I dont think preinstalled OS has anything to do with this.
Full diagnosis?
And how to do this? You know very well that diagnosis can be done with diagnostic tools only and such tools have services only. I hope you will find answers but Im 99% sure there is nothing you can do about that. Maybe you should contact service, explain the situation and ask for help.

Why does Macbook Pro have gray "curtain"and msg to shut down when playing video online?

Hi,
I have a MacBook Pro running Snow Leopard v 10.6.8 and have put on all the security updates.
I bought this machine just days after the newest MBP's were released with Lion because I wanted to stay with Snow Leopard
From the very beginning I would have occasional "gray screens" with a message that I'd encounterd a problem and needed to shut down. It always occured while I was watching a streaming video online (Flash?) but it didn't always happen. I updated my Flash plugin and that seemed to help. I use both Safari and FireFox and both are now updated to the latest versions.
I had also noticed via iCleanMemory that my memory availability was very low .....I always have many tabs open in my browsers and have backup software that backs up to online storage running and when I watched a video, it dropped to almost 0 and everything ran slow. I had 4 GB Ram.
So, I ordered new ram and put that in and now have 8 GB. Machine runs fast. Love it....except it keeps giving me that veil of gray and the message to shut down. It happens several times a day now and while usually in conjunction with watching a video clip, it's not always the case. But I have lots of available memory. That wasn't the issue.
I found an Apple Support paper relative to needing a video update on some mid 2010 MBP's and downloaded it. It won't install and says it won't run on my system so that didn't help.
I'm at my wits' end trying to keep this thing running. Everytime I have to shut it down it means a minimum of 8 min...sometimes more.....before it will restart. If I try to restart sooner than that, it begins to boot and then just has lines and lines of numbers and code running across it....and often continuous beeping sounds and I have to hold the button down to shut it off again. If I wait long enough, it does boot back up and sometimes runs fine as long as I'm not watching video clips, a streaming tv show or clicking on a lot of links in web pages.
I don't believe it has shut down when I was doing anything that wasn't web related....i.e. on a browser. And, when I was running with only 4 gb ram, it rarely shut down, just ran very, very slowly. Now with 8 gb ram it is speedy but doesn't seem to want to keep working!
Anyone have any ideas what I should try next?
Thanks
Paula

Hi Allan,
Thanks for your reply.
I have been closing iCleanMemory but the shut down (kernel panic) was still happening. Not sure how to go about uninstalling it as it's one that runs at start-up and dragging it to the trash might not get rid of it completely. I"ll find it's web site and see if they have any info.
Haven't checked your web link yet (it's late and gotta get to bed) but will do so tomorrow.
I also run Backblaze and DropBox that begin at startup and are constantly updating in the background, iStatMenus and Sharpshooter.
The kernel panics were happening....tho much less frequently.....before i put iClean Memory on. If I remember right, I installed it just because I had those periodic shut downs and wondered if it was a lack of memory. Because I then saw that memory was very low all the time, I decided I must need to put more memory in. And that seems to have made the issue worse while also making the machine work faster for the time it is running.
Now, I've been working on here for a couple of hours and had no problem at all......but I haven't asked it to play any kind of video. Before I quit for the night, I'll try to watch the last one I tried that caused it to shut down and see if it does it again.
I do appreciate your help as I have just enough knowledge about these things to be dangerous.
Paula

I-pod shuts down when browsing album covers

After updating the i-pod touch to the new Op System 5 the player will shut down when I browse the album covers (holding the i-pod horizontal). It will work for about 5 covers but then shuts down. I did a reset but did not help
Anybody who is familiar with the problem?

hiya!
within 30 seconds or so my computer shuts down and starts up again.
are you getting any sort of blue screen? if so, what numerical and text codes are you getting with it? (ie 0x[zeros/letters/numbers] CAPSANDUNDERSCORES)
here's a reference on the sorts of things i'm asking about:
Troubleshooting Windows Stop Messages
if you're not seeing a blue screen (or just a flash of one), we can use this technique to make hidden blue screens appear for us:
1) Open your system control panel (Start->Control Panels->System).
2) Select the "Advanced" tab.
3) Click the "Startup and Recover" section's "Settings" button
4) Verify that under "System Failure" the "Automatically restart" checkbox is not checked.
love, b

MBP shuts down when making Quick time conversion

MBP core duo 1.83 2G ram current updated software.
It shuts down when I try to do a Quick time conversion..
went to the Genius bar and booted from another drive and my macbook still shut down when doing a QT conversion. He says that means it is NOT a software issue.. blames the logic bd.. 310. for a fix if I send it out.. they would keep it overnight and do testing for free.
the console says "previous shut down cause: 3"... He said that was a code for shutting down by holding the button for 4 seconds and got all puzzled about that.
I have been able to convert files using Compressor which I have to do before I can use the go pro video in final cut.
it might have shut down once during a conversion that way.

Monitor your CPU core temp and see at what temp the computer shuts off. Also, download SystemLoad and run that for awhile to stress the processor. See if you can get it to shut down with that and at what temp.
Dave M.
MacOSG Founder/Ambassador  An Apple User Group  iTunes: MacOSG Podcast
Macsimum News Associate Editor  Creator of 'Mac611 - Mobile Mac Support'

IMac from 2009, 4 GB RAM. System shuts down when I use safari or make much moves on the trackpath.

I've got an iMac from 2009, 4 GB RAM. System shuts down when I use safari or make much moves on the trackpath. Use Mavericks, installed Mavericks again on clean system. Problem still exist. What now?

The 2009 iMaccan take 8 GB ram, while it should run ok with 4 it might be a rather inexpensive test to put in 8 and see if that clears up the problems. Mavericks is going to use almost 2 GB itself so, unless you are opening a lot of applications, you should get by with 4 GB. But I would go for 8 and see how it does.

Macbook only shuts down when battery is flat and date and time revert to 2008

Hey Guys
My Macbook only shuts down when the battery goes flat.
When I switch it back on everything seems to be fine though the date and time are incorrect. Seems to go to default date which is 2008.
Other things seem to affect my browser, Facebook won't login properly and certain websites seem to propmt that the website can't be trusted, which is strange because gmail is one of them and should be fine.
Appreciate all the help from you cyber friendly folks!
My system specs
2.2 Ghz
4GB
MAC OS X Version 10.6.8

To answer your questions in sequence:
1) You can't, really: the symptoms your Mac is exhibiting point at a loose or next-to-dead back-up battery. Only way to find out is to test it, and to do that, you must open your machine, locate the battery and test it with a battery tester (see here for more info on how to open your Mac; make sure to select the right model)
2) It's actually the opposite: when you must use your Mac on the battery, well, then, do it, but if you're sitting at your desk, or, like me, on your sofa, with your MBP on your lap, simply keep it plugged into the main.
An additional measure to preserve your battery, that applies less to the recent Unibody design, but is helpful for ealier adopters of the MacBook Pro: don't leave your machine plugged in when it's turned off; it prevents a slow, natural depletion of the battery, and will play against you in the long run.
Last but not least: battery calibration is required once a month for older MacBook Pro models (non-Unibody, basically). If your machine belongs to that era kids the age of Justin B. don't even imagine ever existed, check here.

MacBook Pro shuts down when I close lid. How can I prevent it?

MacBook Pro shuts down when I close lid. How can I prevent it?

Power or other problems related to unexpected system sleep, shutdown, lights or fans call for an SMC reset. Read all the steps.
Before Resetting the SMC
Try each of the following steps in this order before you reset the SMC. Test the issue after completing each troubleshooting step to determine if the issue still occurs.
Press Command + Option + Escape to force quit any application that is not responding.
Put your Mac to sleep by choosing the Apple () menu from the upper-left menu bar and then choosing Sleep. Wake the computer after it has gone to sleep.
Restart your Mac by choosing the Apple () menu from the upper-left menu bar and then choosing Restart.
Shut down your Mac by choosing the Apple () menu from the upper-left menu bar and then choosing Shut Down.
Resetting the SMC on portables with a battery you should not remove on your own
Shut down the computer.
Plug in the MagSafe power adapter to a power source, connecting it to the Mac if it's not already connected.
On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time. The power adapter indicator light may cycle off / on once.
Release all the keys and the power button at the same time.
Press the power button to turn on the computer.

IMac (3.4gHz Intel Core i7) shuts down when sleeps, then won't restart

Just bought a brand new 27" iMac (3.4gHz Intel Core i7) which shuts down when sleeps, then won't restart (ie completely dead).
In order to restart, I have to unplug the power cord from the computer, hold power key down for 10secs, replug in and it then starts up. I returned to the store and they spent a couple days letting it go to sleep etc and overnight and for them it was fine. Woke up no problems. They returned it to me yesterday.
So I set it all up again, left it overnight and this morning it was dead again. So now it leaves me to wonder if it's something I have plugged into it.
I have a new Seagate 3TB external hard drive hooked up using USB3.0. This is plugged directly into the back of the computer.
I also have a powered USB hub plugged into the computer which has regular USB stuff such as printer, graphics tablet and another external hard drive (this one is older LaCie 500gb, and have put it into a new USB 3.0 case as well for the arrival of the new iMac (this had an old firewire hard drive case). However this hard drive is switched off at the case and is not being used.
I believe it could possibly be the Seagate 3TB disk causing this problem, but it works fine during the day while I am using the computer, it's just when I either leave it at lunch time to go to a meeting or walk etc or overnight that I come back and it has shut down....leaving me to believe that it's due to the computer going to sleep.
Has anyone else had a similar problem with a Seagate drive? Today I'm conducting an experiment and heading off for lunch with both hard drives unhooked. If I come back and the computer wakes up from a click of the mouse or keyboard as it should, I will plug in one hard drive at a time and re-test. I will leave the Seagate for last, as I don't think it is the old LaCie disk (which is off).
For reference sake, I also have a NAS running off my network through Airport Extreme etc and have my old iMac hooked up to the network too, but don't believe this is the problem.
Initially I did put in some after market RAM (another 8GB) and though that might be the problem, but I removed and it still reacted the same way (plus store I bought it from again booted up fine and woke up fine at their shop after I had taken RAM out too).
Will keep this post updated with my next test (letting computer sleep without either hard drive in), but keen to hear if anyone has had any similar experiences with Seagate disks/cases and the new iMacs.
Cheers,
Kristin

Hey kristinandmike,
I had a similar problem shortly after I bought my 27" iMac. Here is an excerpt from my discussion:
"As BDAqua suggested, I started the process of elimination by shutting down the externals and just leaving up one of the USB drives and using the computer until time to shut it off. After eliminating 2 of the 3 drives I figured it had to be the last one. That drive is a Seagate GoFlex Desk version that allows different bases with differing connectivity. I had previously used FW800 to connect but had switched to USB3 on the new computer. I went ahead and got a Thunderbolt to FW adaptor cable and switched this drive back to Firewire rather than USB3. So far so good."
For some reason the Seagate I was using didn't agree with the USB3 on the Mac.

InDesign Shuts Down When Saving

InDesign CS3 5.0.2
InDesign shuts down when saving a file. The ONLY time it seems to act up is when we try to save using any option except for "save a copy." There are no numbers, messages, etc. outside of the standard: "InDesign has encountered a problem and must shut down. We apologize for any inconvenience..."
When it does shut down, whatever file was open at the time is lost. Totally. I have yet to be able to locate the previous file using any means.
Has anyone else had this problem. Any fix?

Normally I would recommend replacing your preferences as a first step. I'm not sure quite how to test, though, without putting something at risk.
Maybe replace the prefs, open a new file that won't matter, save a copy, then try a save as and see what happens. You might also try turning off video hardware acceleration, but that seems tenuous, as does a bad font.
Is there a network involved, or are you working locally? If yes, what kind of network? Have you tried working locally?
If none of this has any effect you may need to reinstall, but I hate to put anyone through that pain without a better idea of what the problem is.
Peter

IPhone 5 keeps shutting down when battery is stating good battery strength.

My iPhone 5 has been regularly shutting down when the battery percentage is showing random charge. Sometimes it shuts down at 20% and the highest has turned off at is 73%. It then says battery is empty and needs recharging, but when phone turns on again it says the battery percentage that it turned off at. Today, the phone was charging for 6 hours and it still said the battery was empty. It finally turned on after another 6 hours but battery said 26%. Is this just a need for a new battery or something more seriously wrong with phone?

I'd just like to say that ahs70's post on Dec 1, 2013 at 1:17am on Pg. 9 worked for me as well: https://discussions.apple.com/thread/5338609?start=120&tstart=0
If your iPhone's battery is acting up you need to determine if it's a software issue or a hardware/battery issue. To do that, after syncing your iPhone, erase/hard reset all data and settings from your iPhone to what it was from the factory as new. This can be found in Settings/General/Reset/Erase All Content and Settings. Then test it out for a day or two. If it's still acting up then it's likely a hardware issue and you will need to get your battery replaced. If your warranty is done than check out this link to get a battery kit to replace your iPhone battery yourself: http://www.ifixit.com/Store/iPhone/iPhone-5-Replacement-Battery/IF118-001#produc tDescription
If your iPhone is now working properly after hard resetting it than it's most likely a software issue. This battery issue only started after upgrading to the new iOs7, so it is obviously related to the update not properly installing itself. What has worked for me and many others is to manually update to iOS 7.0.4 using the full downloaded version of the update which is about 1.32 Gigs.
But first you need to find out what model of iPhone you have, click here to determine if it's GSM or CDMA: http://support.apple.com/kb/HT3939?viewlocale=en_US&locale=en_US
Then go here and scroll down to download the iOS 7.0.4 complete update for your device: http://www.downloadios7.org/download-ios-7-0-4-ipsw-file.html
Then scroll up on the download page and follow the instructions of updating your iPhone manually following the instructions below: "IPSW with iTunes"
And your done.
Problem solved.
I only posted this because it was a very frustrating problem that no one really seemed to figure out a solution for.
I hope this helps.
Emile Beaulieu

My older iMac running Mavericks 10.9.4 shuts down when it connects to the internet. Resetting the SMC doesn't help. What can I do?

My older iMac running Mavericks 10.9.4 shuts down when it connects to the internet. Resetting the SMC doesn't help. What can I do?

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off merely by the seeming complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can read it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 ` route -n get default|awk '/e:/{print $2}' ` 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent 464843899 51 );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;5p;6p;8p;12p;' ' {sub(/^ +/,"")};NR==6;NR==13&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/ { next;} /(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'.plist\t'${p[42]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/ { next;} /%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]" "$1;b=b$1;} END { if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|POSIX sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' /^ +[NP].+ =/h;/^( +D.+[{]|[}])/{ g;s/.+= //p;};' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/$L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' '" L*/P*/*loginit*' 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA$|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t /S*/L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' -i4TCP:0-1023 com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;A2 0 $((N1+1)) 2;C0;A1 0 $N1 1;C0;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D13 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 14 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start Time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Email shuts down when open address book

Was unable to find if this was already covered but my email shuts down when I try to open the address book on the mail page (haven't ever used it, so don't have addresses there yet. When I open the address book icon in the dock, it tries to open, but then closes

Sorry to have been AWOL..under the weather...can only check everyother day or so. Followed your directions...
Received email from Apple Support Re: “Application Suddenly Quits” info
No dialog box appears/Restarting does not correct.
Can’t read application’s documentation unless app opens/no documents in app.
Used disk utility
How do I do this?
-1. Uninstalling any third-party plug-ins or enhancements for the application that's quitting unexpectedly. When you update an application or Mac OS X, a plug-in or enhancement you previously installed may not be compatible any longer.
Checked to updates for Address Book software – none, however there was an update for OSX to 10.4.8 - should I do this?.
Disconnected all other devices (should I have to do this?? Printer? Speakers?)
Also suggested
Running Apple Hardware Test, on a disc that came with your computer. If you just installed hardware, such as additional memory, Apple Hardware Test can tell you if it's defective. If you can't find Apple Hardware Test, take your computer to an Apple Authorized Service Provider.
Should I do this?
RE: Console.log
2007-01-16 16:48:13.279 Address Book[249] -[ABAddressBook sharedAddressBook] Can't ABACQUIREFILELOCK Framework/AddressBook/ABAddressBook.m:2730
RE: System.log
Jan 2 11:11:37 Christopher-Anns-Computer mdimportserver[220]: -[ABAddressBook sharedAddressBook] Can't ABACQUIREFILELOCK Framework/AddressBook/ABAddressBook.m:2730
Jan 2 12:15:38 Christopher-Anns-Computer mdimportserver[232]: -[ABAddressBook sharedAddressBook] Can't ABACQUIREFILELOCK Framework/AddressBook/ABAddressBook.m:2730
Jan 2 13:29:59 Christopher-Anns-Computer mdimportserver[238]: -[ABAddressBook sharedAddressBook] Can't ABACQUIREFILELOCK Framework/AddressBook/ABAddressBook.m:2730
Jan 2 13:30:38 Christopher-Anns-Computer launchd: Server 0 in bootstrap 1103 uid 0: "/usr/sbin/lookupd"[218]: exited abnormally: Hangup
Jan 16 12:14:51 localhost kernel[0]: Got boot device = IOService:/MacRISC2PE/pci@f2000000/AppleMacRiscPCI/mac-io@17/AppleKeyLargo/ata- 4@1f000/KeyLargoATA/ATADeviceNub@0/IOATABlockStorageDriver/IOATABlockStorageDevi ce/IOBlockStorageDriver/TOSHIBA MK4018GAS Media/IOApplePartitionScheme/untitled@9
Jan 16 12:17:35 Christopher-Anns-Computer mdimportserver[140]: -[ABAddressBook sharedAddressBook] Can't ABACQUIREFILELOCK Framework/AddressBook/ABAddressBook.m:2730
Jan 16 12:17:51 Christopher-Anns-Computer mDNSResponder: ERROR: Only name server claiming responsibility for "Christopher Ann [Christopher-Anns-Computer.local].ttp4daemon.tcp.488319386462643." is "."!
Jan 16 12:17:51 Christopher-Anns-Computer mDNSResponder: ERROR: unknown result in regservice_callback: -65538
And what is this about???? Am I being spied upon?
Jan 3 09:51:45 localhost kernel[0]: ADB present:8c
Jan 3 09:51:45 localhost kernel[0]: Security auditing service present
Jan 3 09:51:45 localhost kernel[0]: BSM auditing present
Jan 3 09:51:45 localhost kernel[0]: disabled
Thanks soooooo very much for your help.

Safari shuts down when i goto send a message from my hotmail account

safari shuts down when i go to send a message from my hot mail account how do i fix this problem

Can you send an email from your computer to the ePrint service?
If so it may be that your phone is not supported. Here is a list of email clients that have been tested:
Outlook 2003, 2007
Hotmail, Yahoo! Mail, Gmail
Apple Mail (iPhone, iPad, Macbook, MacbookPro)
BlackBerry mail client
Nokia/Symbian client (Nokia)
You can change your account to locked mode from your ePrint Center. Once you've changed it you just enter your email address on the allow list.
Although I am not affiliated with HP, please give Kudos if I've answered your question

N900 shuts down when opening slider

Does anyone else have this problem? I believe I've figured out that it happens when I put a certain battery in it. I have three, total, because my previous phone was a 5800, so I had ordered an extra one. So, now I have three that I can use in my N900.
I think it is an official Nokia battery because it looks exactly like the others...
Anyway, my phone shuts down when I open the slider, using a fully-charged battery. The lights dim as if it is a power failure and it does not reboot like the others having the reboot problem...
Sorry for rambling on!
Any ideas? Thanks
Recent phones: N91, N95-4, 5800xm, N900, E7, & now the beautiful N9

Hi guys
I have a very similar problem and have been unable to enjoy my phone!
I got a new N900 yesterday, for the 2nd time, but the device is still manifesting the same symptoms:
- shuts itself down regularly, whether in use or not;
- sliding the keyboard back in causes it to shut down;
- it shut down when it was taken off the charger;
- I left it on the charger overnight and it stayed up all night (>10hrs);
- even when it is on (for a short while) the screen stays inactive and blank permanently, and the device shuts down when I attempt to slide it open to check that it is indeed on
- attempt to start it up again are not always responded to, and when it does it starts to boot up and then dies again
- it barely stays up long enough to use it for any purpose
- sometimes the charger responds to the power supply and sometimes it doesn't
This was exactly what was happening with the new one I recieved from and sent back to Nokia within days. They asked me to return it without the battery and charger and claimed to have tested the new one before sending it back to me. I have put in the battery and used the charger from the previous new device.
I have tried to analyse the problem and I am beginning to think that the issue might be related to either a dodgy battery or charger. What do you think?
I have asked Nokia to send me a replacement charger and batter. In the meantime, have you any suggestions I could try?
Thanks.
**bleep**

Flash shutting down when i test

Similar Messages

Maybe you are looking for