Flash site - swf file too large

Hello,
I have created a website using Flash CS5 using AS2. The site was completely custom designed using Photoshop and in then imported into Flash. The site has all of the pages in the main timeline on different keyframes, so say frame 2 is home, and frame 3 is services, etc. This is a site for my design portfolio so I have probably 5 galleries that I have made, but they are very simple, one frame will have the first picture, the next frame will have the second picture and so on. I have gotten my site exactly how I want it and works how I want it... but in the end the .swf file when published, is over 9MB which I know is wayyyyyy too large for a flash site that works fast for everyone.
So how can I make this file size smaller. I am fairly new to this, although I had no problem getting my buttons to navigate with actionscript no problem, but my actionscript knowledge is very limited beyond that. I'm not sure where to go with this site to make the size smaller, so any help would be greatly appreciated.
I can send someone the fla file to look at if needed.
Thanks

Thanks for the reply.
Maybe you can help me a little more.
I looked up some tutorials having to do with the AS2 xml galleries, and I found that almost all of them were for galleries with fancy scrolling options and slider bars, etc.
My galleries are very very basic, thumbs are layed out on the left, click one and the image appears on the right. I'm not the best at using the actionscript and knowing what to do with all of it. So some of the tutorials made sense about getting files to load dynamically, but I'm not sure what code to keep in for my gallery, and what code to take out that I dont need for all the fancy effects.
my site is http://www.mrolfedesigns.com
as you can see, the galleries are pretty simple, I would like to keep them that way, and not have any complex scrolling or slider bars. Ive searched a lot into looking for some more simple tutorials, but am not finding any great ones that I can use.

Similar Messages

Uploading flash, how much is too large?

Hi, I am trying to create a web site suing adobe Dreamweaver and flash, for the first time.
I am trying to upload a webpage that contains swf.
When I check mu site I could only see a blank page with the webpage title at the top of the page.
When I contacted the webhosting company they say they can see the message that a newer version of adobe flash player is required.
From my computer I cannot even see the message.
The helpdesk person said there are possibly two reasons for it. Either there is a problem with the code in flash or it is too large.
The size of files I uploaded as follows:
HTML: 4KB
Scripts: 37 KB
(The size of swf is 29KB which I did not upload)
Are they too large to upload? If so, what is the maximum size of file can I upload on a webpage?
I know they are basic questions but I am trying to create website on my own.
I would appreciate some friendly advice.

If the html page is supposed to contain the Flash file, then you need to uploadc the Flash file (swf). html pages are simply text files that define content. If any of that content happens to be another file, such as an image or sound or swf file, then you need to also upload those files.

TFTP file too large for upload

I'm trying to upgrade my router via TFTP. I keep getting this File too large for TFTP error. I'm using the recommended TFTP server from Solarwinds.
There does not seem to be any setting in the server to let large file pass, It's the first time I see that, but this is the biggest IOS I had to upload. I had no problem sending the last IOS witch is only about 3MB smaller.

correct. copy ftp://userid:password@servername/directory/filename flash:
For more information, refer to the following URL:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios124/124tcr/tcf_r/cf_02ht.htm#wp1032450
Hope this helps,

Disk Utility: Creating a new blank image receiving "file too large" error.

Hello All!
I'm trying to create a 10GB non-encrypted, non-compressed RW blank image via the disk utility. The DU runs for a few minutes then barfs out "file too large" error. I have over 30GB free on my HDD. I tried with a smaller size of 6GB to no avail. Also tried unsuccessfully to create from a file (about 4 GB). My ultimate goal is to create a case-insensitive image to run an extremely important program needed for high priority work productivity (i.e. WoW). Thanks in advance for any advice! You will be my new best friend if you help me resolve this. =D
Hollie
"There are only 10 types of people in this world: Those who understand binary, and those who don't."

Hi Hollie, and welcome to the forums!
Have you created images before successfully?
Is this to/on your boot drive, or an external drive?
Have you done any Disk/OS maintenance lately?
We might see if there are some big temp files left or such...
How much free space is on the HD, where has all the space gone?
OmniDiskSweeper is now free, and likely the best/easiest...
http://www.omnigroup.com/applications/omnidisksweeper/
WhatSize...
http://www.macupdate.com/info.php/id/13006/
Disk Inventory X...
http://www.derlien.com/
GrandPerspective...
http://grandperspectiv.sourceforge.net/

File too large error unpacking War during app deploy - RHEL &WLS 10.3.5

I'm stumped and I'm hoping someone can help out here. Does anyone have any insights into the cause of my problem below, or tips on how to diagnose the cause?
scenario
We ran into an open files limit issue on our RH Linux servers, and had the SA boost the our open files limit fro 1024 to 3096. This seems to have solved the open files limit issue, once we restarted the node managers and the managed servers (our WLS startup script sets the soft limit to the hard limit).
But now we've got a new issue, right after this change. The admin server is now no longer able to deploy and war/ear, as when I click on "Activate" after the install I get
Message icon - Error An error occurred during activation of changes, please see the log for details.
Message icon - Error Failed to load webapp: 'TemplateManagerAdmin-1.0-SNAPSHOT.war'
Message icon - Error File too large
on the console, and see the stack trace below in the Admin server log (nothing in the managed server logs) - indicating it's getting the error in exploding the war.
I've tried both default deployment mode, and the mode "will make the deployment available in the following location" where the war is manually copied to the same location on each box, available to each server - all with the same result. I've also tried restarting the admin server, but no luck.
The files are not overly large (<=34 MByte) and we had no trouble with them before today. I'm able to log in as the WebLogic user and copye files, etc. with no problem.
There is no disk space issue - plenty of space left on all of our filesystems. There is, as far as I can tell, no OS or user file size limit issue:
 -bash-3.2$ ulimit -a
 core file size (blocks, -c) 0
 data seg size (kbytes, -d) unlimited
 scheduling priority (-e) 0
 file size (blocks, -f) unlimited
 pending signals (-i) 73728
 max locked memory (kbytes, -l) 32
 max memory size (kbytes, -m) unlimited
 open files (-n) 3096
 pipe size (512 bytes, -p) 8
 POSIX message queues (bytes, -q) 819200
 real-time priority (-r) 0
 stack size (kbytes, -s) 10240
 cpu time (seconds, -t) unlimited
 max user processes (-u) unlimited
 virtual memory (kbytes, -v) unlimited
 file locks (-x) unlimited
environment
WLS 10.3.5 64-bit
Linux 64-bit RHEL 5.6
Sun Hotspot 1.6.0_29 (64--bit)
stack trace
####<Mar 6, 2013 4:09:33 PM EST> <Error> <Console> <nj09mhm5111> <prp_appsvcs_admin> <[ACTIVE] ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'> <steven_elkind> <> <> <1362604173724> <BEA-240003> <Console encountered the following error weblogic.application.ModuleException: Failed to load webapp: 'TemplateManagerAdmin-1.0-SNAPSHOT.war'
at weblogic.servlet.internal.WebAppModule.prepare(WebAppModule.java:393)
at weblogic.application.internal.flow.ScopedModuleDriver.prepare(ScopedModuleDriver.java:176)
at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:199)
at weblogic.application.internal.flow.DeploymentCallbackFlow$1.next(DeploymentCallbackFlow.java:517)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:159)
at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:45)
at weblogic.application.internal.BaseDeployment$1.next(BaseDeployment.java:613)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.BaseDeployment.prepare(BaseDeployment.java:184)
at weblogic.application.internal.SingleModuleDeployment.prepare(SingleModuleDeployment.java:43)
at weblogic.application.internal.DeploymentStateChecker.prepare(DeploymentStateChecker.java:154)
at weblogic.deploy.internal.targetserver.AppContainerInvoker.prepare(AppContainerInvoker.java:60)
at weblogic.deploy.internal.targetserver.operations.ActivateOperation.createAndPrepareContainer(ActivateOperation.java:207)
at weblogic.deploy.internal.targetserver.operations.ActivateOperation.doPrepare(ActivateOperation.java:98)
at weblogic.deploy.internal.targetserver.operations.AbstractOperation.prepare(AbstractOperation.java:217)
at weblogic.deploy.internal.targetserver.DeploymentManager.handleDeploymentPrepare(DeploymentManager.java:747)
at weblogic.deploy.internal.targetserver.DeploymentManager.prepareDeploymentList(DeploymentManager.java:1216)
at weblogic.deploy.internal.targetserver.DeploymentManager.handlePrepare(DeploymentManager.java:250)
at weblogic.deploy.internal.targetserver.DeploymentServiceDispatcher.prepare(DeploymentServiceDispatcher.java:159)
at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.doPrepareCallback(DeploymentReceiverCallbackDeliverer.java:171)
at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.access$000(DeploymentReceiverCallbackDeliverer.java:13)
at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer$1.run(DeploymentReceiverCallbackDeliverer.java:46)
at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:528)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
Caused by: java.io.IOException: File too large
at java.io.FileOutputStream.writeBytes(Native Method)
at java.io.FileOutputStream.write(FileOutputStream.java:282)
at weblogic.utils.io.StreamUtils.writeTo(StreamUtils.java:19)
at weblogic.utils.FileUtils.writeToFile(FileUtils.java:117)
at weblogic.utils.jars.JarFileUtils.extract(JarFileUtils.java:285)
at weblogic.servlet.internal.ArchivedWar.expandWarFileIntoDirectory(ArchivedWar.java:139)
at weblogic.servlet.internal.ArchivedWar.extractWarFile(ArchivedWar.java:108)
at weblogic.servlet.internal.ArchivedWar.<init>(ArchivedWar.java:57)
at weblogic.servlet.internal.War.makeExplodedJar(War.java:1093)
at weblogic.servlet.internal.War.<init>(War.java:186)
at weblogic.servlet.internal.WebAppServletContext.processDocroot(WebAppServletContext.java:2789)
at weblogic.servlet.internal.WebAppServletContext.setDocroot(WebAppServletContext.java:2666)
at weblogic.servlet.internal.WebAppServletContext.<init>(WebAppServletContext.java:413)
at weblogic.servlet.internal.WebAppServletContext.<init>(WebAppServletContext.java:493)
at weblogic.servlet.internal.HttpServer.loadWebApp(HttpServer.java:418)
at weblogic.servlet.internal.WebAppModule.registerWebApp(WebAppModule.java:972)
at weblogic.servlet.internal.WebAppModule.prepare(WebAppModule.java:382)

In the end, the problem was not in the Admin server where the log entry is, but in one of the managed servers where there was no such log entry.
Somehow, and we have no idea how, the NodeManager process had the soft limit for max file size set to 2k blocks. Thus, the managed server inherited that. We restarted the Node Manager, then the managed server, and the problem went away.
The diagnostic that turned the trick:
cat /proc/<pid>/limits
for the managed server showed the bad limit setting, then diagnosis proceeded from there. The admin server, of course, had "unlimited" since it was not the source of the problem.

File too large - attachment settings not working

Hi there
We are having problems with attaching files in IMS 5.2 & wondered if anybody can help.
Our outgoing mail message max size is set to 50MB (I know about the extra 33% space required for encoding) and yet we still cannot attach files to emails that are greater than 5MB.
Does anyone have any idea why this is not working?
Anytime we try to send a 7 or 8 MB file an error "File too large "comes up right away
The settings in the messaging server console is set to 50MB. This is under the HTTP service
There was a previous post but the solution did not solve my problem.
Can anyone help?
Thanks

There are separate settings for webmail attaqchments. Please check documentation at:
http://docs.sun.com/source/816-6020-10/cfgutil.htm
and look at:
service.http.maxmessagesize
and
service.http.maxpostsize
these both default to 5 megs.
You have to restart the webmail daemon to make a change take effect.

Embed Animated Flash Objects (*.swf file) in Oracle Forms.

Hello All,
To Embed Animated Flash Object (Shockwave *.swf File) in Oracle Forms, Please Follow the Steps Below.
1. Draw "ActiveX Control" Item on Canvas with the Name "OCXITM".
2. Select "ActiveX Control" Item & Go to its Properties (By Pressing F4).
3. Select "ShockwaveFlash.ShockwaveFlash" in "OLE Class" Property of "ActiveX Control" Item.
4. Come again to the Canvas.
5. Right Click on "ActiveX Control" Item, Select "Insert Object...".
6. In Control Type List, Select "Sockwave Flash Object" and Press "OK".
7. On Canvas, Select "ActiveX Control" Item, Go to "Program" Menu, Select "Import OLE Library Interfaces...".
8. Select All "Method Package(s)" & "Event Package(s)" for "ShockwaveFlash.ShockwaveFlash.X" & Press "OK".
9. Go to "Object Nevigator" (By Pressing F3) & Expand "Program Unit" to verify that the Packages are Successfully Imported.
10. Compile All the Objects (By Pressing "Ctrl+Shift+K").
11. In "WHEN-NEW-FORM-INSTANCE" Trigger Write the Below Code.
** Author   : Muhammad Waseem Haroon                        *
** Dated    : 07-Apr-2005                                   *
** Purpose : To Call Macromedia Flash Object (*.swf File) *
** Module   : Logo                                          *
DECLARE
     oleitm OLEOBJ;
BEGIN
     oleitm := :item('OCXITM').INTERFACE;
     ShockwaveFlash_IShockwa_0.Movie(oleitm,'d:\movie.swf');--it can be dynamic.
END;12. Compile, Save & Run Your Form.... and... See the Beauty.
Thanks & Regards
Muhammad Waseem Haroon
[email protected]
[email protected]
[email protected]

Mark Striekwold did an effort to put flash into forms
http://mark-oradev.blogspot.com/2010/02/flash-inside-oracle-forms.html
http://mark-oradev.blogspot.com/2010/02/flash-test-inside-oracle-forms-part-2.html
http://mark-oradev.blogspot.com/2010/04/flash-test-inside-oracle-forms.html

WebLogic Issue: File too large

Hi All,
I am getting below error in logs while starting the WLS (10.3.5 on IBM AIX 6.1 using IBM JDK) AdminServer:
####<Nov 8, 2012 10:28:45 PM PST> <Notice> <Security> <edrpoc10.ftb.ca.gov> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1352442525279> <BEA-090082> <Security initializing using security realm myrealm.>
####<Nov 8, 2012 10:28:51 PM PST> <Notice> <WebLogicServer> <edrpoc10.ftb.ca.gov> <AdminServer> <main> <<WLS Kernel>> <> <> <1352442531303> <BEA-000365> <Server state changed to STANDBY>
####<Nov 8, 2012 10:28:51 PM PST> <Notice> <WebLogicServer> <edrpoc10.ftb.ca.gov> <AdminServer> <main> <<WLS Kernel>> <> <> <1352442531304> <BEA-000365> <Server state changed to STARTING>
####<Nov 8, 2012 10:28:54 PM PST> <Warning> <oracle.as.jmx.framework.MessageLocalizationHelper> <edrpoc10.ftb.ca.gov> <AdminServer> <JMX FRAMEWORK Domain Runtime MBeanServer pooling thread> <<anonymous>> <> <0000JfZqpLg4ykJLQm5Eid1GbAAX000001> <1352442534039> <J2EE JMX-46041> <The resource for bundle "oracle.jrf.i18n.MBeanMessageBundle" with key "oracle.jrf.JRFServiceMBean.checkIfJRFAppliedOnMutipleTargets" cannot be found.>
####<Nov 8, 2012 10:28:57 PM PST> <Error> <Deployer> <edrpoc10.ftb.ca.gov> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1352442537493> <BEA-149205> <Failed to initialize the application 'adf.oracle.domain [LibSpecVersion=1.0,LibImplVersion=11.1.1.2.0]' due to error weblogic.application.library.LibraryDeploymentException: [J2EE:160141]Could not initialize the library Extension-Name: adf.oracle.domain, Specification-Version: 1, Implementation-Version: 11.1.1.2.0. Please ensure the deployment unit is a valid library type (war, ejb, ear, plain jar). weblogic.application.library.LibraryProcessingException: java.io.IOException: File too large
 at weblogic.application.internal.library.EarLibraryDefinition.init(EarLibraryDefinition.java:93)
 at weblogic.application.utils.LibraryLoggingUtils.initLibraryDefinition(LibraryLoggingUtils.java:277)
 at weblogic.application.internal.library.LibraryDeployment.prepare(LibraryDeployment.java:44)
 at weblogic.application.internal.DeploymentStateChecker.prepare(DeploymentStateChecker.java:154)
 at weblogic.deploy.internal.targetserver.AppContainerInvoker.prepare(AppContainerInvoker.java:60)
 at weblogic.deploy.internal.targetserver.AppDeployment.prepare(AppDeployment.java:141)
 at weblogic.management.deploy.internal.DeploymentAdapter$1.doPrepare(DeploymentAdapter.java:39)
 at weblogic.management.deploy.internal.DeploymentAdapter.prepare(DeploymentAdapter.java:191)
 at weblogic.management.deploy.internal.AppTransition$1.transitionApp(AppTransition.java:21)
 at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:240)
 at weblogic.management.deploy.internal.ConfiguredDeployments.prepare(ConfiguredDeployments.java:165)
 at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:122)
 at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:180)
 at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:96)
 at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
 at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
 at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
Caused by: java.io.IOException: File too large
 at java.io.FileOutputStream.writeBytes(Native Method)
 at java.io.FileOutputStream.write(FileOutputStream.java:282)
 at weblogic.utils.io.StreamUtils.writeTo(StreamUtils.java:19)
 at weblogic.utils.FileUtils.writeToFile(FileUtils.java:117)
 at weblogic.utils.jars.JarFileUtils.extract(JarFileUtils.java:285)
 at weblogic.utils.jars.JarFileUtils.extract(JarFileUtils.java:246)
 at weblogic.application.io.ExplodedJar.extractJarFile(ExplodedJar.java:301)
 at weblogic.application.io.ExplodedJar.<init>(ExplodedJar.java:54)
 at weblogic.application.io.Ear.<init>(Ear.java:47)
 at weblogic.application.internal.library.EarLibraryDefinition.init(EarLibraryDefinition.java:81)
 ... 16 more
####<Nov 8, 2012 10:28:59 PM PST> <Error> <Deployer> <edrpoc10.ftb.ca.gov> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1352442539037> <BEA-149205> <Failed to initialize the application 'emai' due to error weblogic.application.library.LibraryDeploymentException: [J2EE:160141]Could not initialize the library Extension-Name: emai. Please ensure the deployment unit is a valid library type (war, ejb, ear, plain jar). weblogic.application.library.LibraryProcessingException: java.io.IOException: File too large
Any pointers on resolving the issue?
Regards,
Sunny
Edited by: ajmerasunny on Nov 9, 2012 10:23 AM

Hi Sunny,
The issue is because in your OS AIX,You dont have the support for largefile .
How do you enable largefile support in AIX?
On file /etc/security/limits , change the value of "fsize" to -1 . "-1" denotes unlimited. Log-off and login , stop & start applications to make largefiles work.
Ref: http://unixfoo.blogspot.in/2008/11/aix-filesystem-tips.html

Weblogic 10 - application deployment error: Exception is: "File too large"

I posted this in Weblogic -> general but realise is should have really gone here as it's about admin server/deployment services setup / configuration.
I am using weblogic application server 10 in a weblogic clustered enviornment.
I am trying to deploy an application to a managed server when it starts up, all goes well and I can see it deploying the war files to the managed server.
It hits a certain war and panics with the exception
####<Nov 19, 2011 2:03:59 PM BRST> <Error> <Deployer> <devnode01> <managedserver2> <[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <1321718639109> <BEA-149205> <Failed to initialize the application 'test_war' due to error weblogic.management.DeploymentException: Exception occured while downloading files.
weblogic.management.DeploymentException: Exception occured while downloading files
at weblogic.deploy.internal.targetserver.datamanagement.AppDataUpdate.doDownload(AppDataUpdate.java:43)
at weblogic.deploy.internal.targetserver.datamanagement.DataUpdate.download(DataUpdate.java:56)
at weblogic.deploy.internal.targetserver.datamanagement.Data.prepareDataUpdate(Data.java:97)
at weblogic.deploy.internal.targetserver.BasicDeployment.prepareDataUpdate(BasicDeployment.java:682)
at weblogic.deploy.internal.targetserver.BasicDeployment.stageFilesForStatic(BasicDeployment.java:725)
at weblogic.deploy.internal.targetserver.AppDeployment.prepare(AppDeployment.java:104)
at weblogic.management.deploy.internal.DeploymentAdapter$1.doPrepare(DeploymentAdapter.java:39)
at weblogic.management.deploy.internal.DeploymentAdapter.prepare(DeploymentAdapter.java:187)
at weblogic.management.deploy.internal.AppTransition$1.transitionApp(AppTransition.java:21)
at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:233)
at weblogic.management.deploy.internal.ConfiguredDeployments.prepare(ConfiguredDeployments.java:165)
at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:122)
at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:173)
at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:89)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Caused By: java.io.IOException: [DeploymentService:290066]Error occurred while downloading files from admin server for deployment request "0". Underlying error is: "[DeploymentService:290065]Deployment service servlet encountered an Exception while handling the deployment datatransfer message for request id "0" from server "managedserver2". Exception is: "File too large"."
at weblogic.deploy.service.datatransferhandlers.HttpDataTransferHandler.getDataAsStream(HttpDataTransferHandler.java:86)
at weblogic.deploy.service.datatransferhandlers.DataHandlerManager$RemoteDataTransferHandler.getDataAsStream(DataHandlerManager.java:153)
at weblogic.deploy.internal.targetserver.datamanagement.AppDataUpdate.doDownload(AppDataUpdate.java:39)
at weblogic.deploy.internal.targetserver.datamanagement.DataUpdate.download(DataUpdate.java:56)
at weblogic.deploy.internal.targetserver.datamanagement.Data.prepareDataUpdate(Data.java:97)
at weblogic.deploy.internal.targetserver.BasicDeployment.prepareDataUpdate(BasicDeployment.java:682)
at weblogic.deploy.internal.targetserver.BasicDeployment.stageFilesForStatic(BasicDeployment.java:725)
at weblogic.deploy.internal.targetserver.AppDeployment.prepare(AppDeployment.java:104)
at weblogic.management.deploy.internal.DeploymentAdapter$1.doPrepare(DeploymentAdapter.java:39)
at weblogic.management.deploy.internal.DeploymentAdapter.prepare(DeploymentAdapter.java:187)
at weblogic.management.deploy.internal.AppTransition$1.transitionApp(AppTransition.java:21)
at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:233)
at weblogic.management.deploy.internal.ConfiguredDeployments.prepare(ConfiguredDeployments.java:165)
at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:122)
at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:173)
at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:89)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
The error appears to be stating the physical file is too big to be deployed
I'm running the managed servers with a heap size of 3GB and the managed server is running with 2GB - I know these are large but they where being used for debugging
I can't find any documentation on the file size too large error, or how to resolve it
DeploymentService:290065 says to look in the log (details are above) and DeploymentService:290066 says the error will be explained in it's description, which it is, "file size too big", it doesn't say where to see/set the max file size, there is plenty of disk space so I can only assume it's setting for the deployment service that needs to be increase, but I cannot find info on this.

I don't think this would help, but would using the nostage option for deployment change this behaviour.
I don't think it would as this is for disk based problems rather than transfer size issues.

Attachment file too large

Hello,
I have messaging server 7.
I am composing the message having attachment around 5MB and 4.2 MB
It says file too large.
I checked the domain level attachment quota, it is unlimited.
i tried putting value 10,1000, however no effect.
what am I missing.
Users quota is unlimited.
regards,
Sumant

mr.chhunchha wrote:
I am composing the message having attachment around 5MB and 4.2 MB
It says file too large.There are two limits that control the size of emails composed in the various webmail interfaces (Messenger Express/UWC/Convergence):
bash-3.00# ./configutil -H -o service.http.maxpostsize
Configuration option: service.http.maxpostsize
Description: Maximum HTTP post content length. If not specified, uses max(5*1024*1024, service.http.maxmessagesize).
Syntax: uint
service.http.maxpostsize is currently unset
bash-3.00# ./configutil -H -o service.http.maxmessagesize
Configuration option: service.http.maxmessagesize
Description: Maximum message size client is allowed to send.
Syntax: uint
Default: 5242880
service.http.maxmessagesize is currently unset
So the service.http.maxpostsize is the maximum size of any given attachment upload the service.http.maxmessagesize is the maximum overall size of the email => both are set to 5MB by default.
After changing the configutil settings you need to restart the mshttpd process for the change to take effect (./stop-msg http;./start-msg http).
Regards,
Shane.

BR0253E errno 27: File too large in db13

Dear,
When I am taking full online backup via DB13 . it give follwing error.Our this data file size is near about 3 Gb.Archive log is working fine.
BR0202I Saving /oracle/PRD/sapdata1/sr3_3/sr3.data3
BR0203I to /dev/rmt/1mn ...
#FILE..... /oracle/PRD/sapdata1/sr3_3/sr3.data3
#SAVED.... sr3.data3 PRD_ON_01/6
BR0280I BRBACKUP time stamp: 2011-09-01 14.42.08
BR0063I 3 of 88 files processed - 6000.023 MB of 251452.688 MB done
BR0204I Percentage done: 2.39%, estimated end time: 15:55
BR0001I *_________________________________________________
BR0252E Function fwrite() failed for '/oracle/PRD/sapbackup/begrilim.spa/sr3.data34' at location BrSparseCreate-8
BR0253E errno 27: File too large
BR0280I BRBACKUP time stamp: 2011-09-01 14.42.10
BR0317I 'Alter tablespace PSAPSR3 end backup' successful
BR0056I End of database backup: begrilim.fnt 2011-09-01 14.42.08
BR0280I BRBACKUP time stamp: 2011-09-01 14.42.10
my initSID.sap setting is given below.
backup_mode = all
restore_mode = all
backup_type = online
backup_dev_type = tape
backup_root_dir = /oracle/PRD/sapbackup
stage_root_dir = /oracle/PRD/sapbackup
compress=hardware
compress_cmd = "compress -c $ > $"
uncompress_cmd = "uncompress -c $ > $"
compress_dir = /oracle/PRD/sapreorg
archive_function = save
archive_copy_dir = /oracle/PRD/sapbackup
archive_stage_dir = /oracle/PRD/sapbackup
tape_copy_cmd = dd
disk_copy_cmd = copy
stage_copy_cmd = rcp
pipe_copy_cmd = rsh
cpio_flags = -ovB
cpio_in_flags = -iuvB
dd_flags = "obs=128k bs=128k"
dd_in_flags = "ibs=128k bs=128k"
saveset_members = 1
copy_out_cmd = "dd ibs=8k obs=128k of=$'
copy_in_cmd = "dd ibs=128k obs=8k if=$"
tape_size = 800G
exec_parallel = 0
tape_address = /dev/rmt/1mn
Regards

Hi Pooja,
This note may be helpful.
Note 553854 - Oracle: Problems with file size limit
This note has information about the error "<unix> Error: 27: File too large"
Br,
Venky.

6280 : file too large

Hi,
I have a 6280 model and I try to send an e-mail message with an attachement larger then 100k. I receive a "file too large" message. I'm using an POP3 mail account. Memory status show 2,1 Mb free on the phone memory. When I try with an attachement smaller then 100 k it works. Nokia service in my cowntry tell me this is a phone manufacturer limit (100k) but i think this is stupid. Can I do something ?

i know that thing, that's just the bad bits about the phone it cant send larger than 100k, i dont think you could do anything about it.
Nokia N95
V 20.0.015
0546553

File too large error or corrupt file error

I have scanned some images using a Nikon Cool Scan and when trying to import the the NEF files into Lightroom I get a corrupt or unrecognized file error. Bring it into CS2 or CS3 and save as TIFF and try the import and get a File too large error.
Any ideas or help on this. What is the file size max for import?
The scan is 4000dpi even tried at 300dpi.
Thanks in advance for any insight.

> Is it truly a size problem? If so, what is recommended? Lee Jay states that 10000 pixels is the max on either side. Okay, in DPI, what does that translate to?
 
 There's no necessary relationship between pixels and dots. You could scan an image at 4,000,000 dpi and translate it into an image of 100 x 100 pixels. I've used ridiculous extremes to make a point. The LR limitation is currently 10,000 pixels for any side. So you could have 9,000 x9,000 pixels but not 10,001 x50 pixels.
 
 Is this now clearer?
 
 
John "McPhotoman"
 color="#800000" size="2">~~ John McWilliams
 
 
 
 MacBookPro 2 Ghz Intel Core Duo, G-5 Dual 1.8;
 Canon DSLRs

Posfix error writing message: File too large

I was looking for a reason for my Mac hanging occasionally. In Console I found the following recurring error message.
10/2/11 8:15:19 PM postfix/master[656] daemon started -- version 2.5.5, configuration /etc/postfix
10/2/11 8:16:00 PM postfix/pickup[657] B6095D33A25: uid=501 from=<Al>
10/2/11 8:16:00 PM postfix/cleanup[664] B6095D33A25: message-id=<[email protected]>
10/2/11 8:16:00 PM postfix/qmgr[658] B6095D33A25: from=<[email protected]>, size=668, nrcpt=1 (queue active)
10/2/11 8:16:00 PM postfix/local[666] B6095D33A25: to=<[email protected]>, orig_to=<Al>, relay=local, delay=0.08, delays=0.04/0.02/0/0.02, dsn=5.2.2, status=bounced (cannot update mailbox /var/mail/al for user al. error writing message: File too large)
10/2/11 8:16:00 PM postfix/cleanup[664] C5ACFD33A28: message-id=<[email protected]>
10/2/11 8:16:00 PM postfix/bounce[667] B6095D33A25: sender non-delivery notification: C5ACFD33A28
10/2/11 8:16:00 PM postfix/qmgr[658] C5ACFD33A28: from=<>, size=2366, nrcpt=1 (queue active)
10/2/11 8:16:00 PM postfix/qmgr[658] B6095D33A25: removed
10/2/11 8:16:00 PM postfix/local[666] C5ACFD33A28: to=<[email protected]>, relay=local, delay=0.01, delays=0/0/0/0, dsn=5.2.2, status=bounced (cannot update mailbox /var/mail/al for user al. error writing message: File too large)
10/2/11 8:16:00 PM postfix/qmgr[658] C5ACFD33A28: removed
10/2/11 8:16:19 PM postfix/master[656] master exit time has arrived
I haven't done anything with Postfix, but I'm guessing one of the monitoring utilities is set up to send me an email message if it finds an error.
Looking for ideas on how to fix this.

Well, I think I figured this out.
I found this posting on a message board http://www.linuxquestions.org/questions/linux-networking-3/file-too-large-in-pos tfix-495988/#post2480213
I ran this command in terminal: sudo postconf -e "virtual_mailbox_limit=0" then: sudo postfix reload
That still didn't fix the error messages.
Then I ran this command in terminal: sudo postconf -e "mailbox_size_limit=0" then: sudo postfix reload
That stopped the "file too large" error message.
Now the console message I get is:
postfix/master[1630] daemon started -- version 2.5.14, configuration /etc/postfix
postfix/pickup[1631] 68EA012A66BD: uid=501 from=<Al>
postfix/cleanup[1643] 68EA012A66BD: message-id=<[email protected]>
postfix/qmgr[1632] 68EA012A66BD: from=<[email protected]>, size=707, nrcpt=1 (queue active)
postfix/pickup[1631] BA07112A66BE: uid=501 from=<Al>
postfix/cleanup[1643] BA07112A66BE: message-id=<[email protected]>
postfix/local[1645] 68EA012A66BD: to=<[email protected]>, orig_to=<Al>, relay=local, delay=0.82, delays=0.5/0.09/0/0.23, dsn=2.0.0, status=sent (delivered to mailbox)
postfix/master[1630] master exit time has arrived
I'm guessing this is normal function of the postfix system. However, I'm still not sure what postfix is doing. Maybe its the under-the-hood stuff for Apple Mail?

Final cut pro : Export failed - File too large

Hello
I'm trying to export a project in FCP 10.0.5.
It seems to work but when it reaches 45% the export stops and here's the message :
Export failed : file too large ...
Can anyone help me please?
Thank you,
Fred

The file size is about right but your sampling rate is wrong.
44.1 kHz is CD Audio standard. Digital video uses 48 kHz -you can use QuickTime Player to resample:
File > Export > Sound to AIFF. Click Options and then *Audio Settings* to change the sampling rate.

Flash site - swf file too large

Similar Messages

Maybe you are looking for