Flash Slide Presentation...how to control volume?

Hello,
I am working in Flash Slide Presentation mode. I have a
started a sound file playing on the "master" slide and I want it to
play throughout my entire presentation. However, on a couple of
slides, I want to play some short voice clips. How can I "turn down
the volume" a bit on the main sound file so as to hear the short
voice clips? And then turn it back up when the voice clip ends?
I understand basic Actionscript. Can anyone tell me the code
or point me to a tutorial which I can use to accomplish this?
Thanks in advance.

Ah, I was tying the (unavailable ) controller number and I didn't see the pitch controller option spelled out in plain sight!

Similar Messages

Controlling volume in a Flash Slide Presentation

Hello,
I am working in Flash Slide Presentation mode. I have a
started a sound file playing on the "master" slide and I want it to
play throughout my entire presentation. However, on a couple of
slides, I want to play some short voice clips. How can I "turn down
the volume" a bit on the main sound file so as to hear the short
voice clips? And then turn it back up when the voice clip ends?
I understand basic Actionscript. Can anyone tell me the code
or point me to a tutorial which I can use to accomplish this?
Thanks in advance.

use a sound instance to create your background sound. and, how to control your flv sound depends on what you did to display your flv.

How come querystring variables don't work with Flash Slide Presentations

How come querystring variables don't work with Flash Slide
Presentations
When I create a regular new Flash FLA and publish it I can
add a querystring to the file name in the object tag and get that
value back in the flash move like this:
myflashfile.swf?myname=andrew
But when I try the same thing using a new Flash Slide
Presentation with screen, it doesn't work.
Is there something I'm missing that I'm not aware of or does
the Flash Slide Presentation not support the use of querystrings?
I have tried this using a mix of PC and Mac with MX2004 Pro
and Flash 8 Pro.
Any reference links or ideas are much appreciated.
Thanks,
Andrew

Good info found here:
http://flashmx2004.com/forums/index.php?showtopic=971&hl=query

Flash Slide Presentation Format vs Flash File

I mistakenly made a fairly robust animation (15 layers about 5 min long with sound) in a Flash Slide Presentation document. The entire animation sits in slide number 1 (no other slides in this doucument). I need to take this animation out of the Slide Presentation mode an put it into a regular flash file because other applications are reading the presentation holder slide and not reading the animation. Is there a way to get rid of the "Presentation (parent) holder slide or do I need to copy the whole thing to another document? If so how do I do that? Thanks in advance for your help,

shift-click and drag across all the frames of your animation to select all the frames, then right click and click copy. go to a new swf and right click on a frame and click paste.

Flash Slide presentation and movieclip looping

Hi,
Im having a problem with the flash slide presentation. I have
on the main timeline of one of my slides a movieclip. When i play
the movie, the clip will loop endlessley. I would like the movie
clip to play just once. In a regular flash movie this would not be
a problem - i could put a stop action on the last frame of the
movieclip. but, doing that in the context of a flash slide freezes
the movieclip at the begining so it does not play at all..
help!

Ok, Ive managed to solve item 2. - if you set in the slide
component inspector - "playHidden=false" then the slide animation
will restart any time you reenter the slide. Im still lacking an
understanding of how to stop a motion tween from repeating itself
when it's contained within a movie clip as a motion tween timeline
cannot recieve fram actions apparently...

Flash Slide presentation - mouse wheel

Hi
Is it posible to custom flash slide presentation to respond to mouse wheel ?
can it move to next and previous scene by moving the mouse wheel?
Please advice

i am working in AS2

Please help -- Flash Slide Presentation

I've completed a Flash Slide Presentation (here at
work, which should be online right now). There are no nav buttons
displayed, but the left and right arrow buttons work when run
directly as a flash movie (test movie). As soon as I use the
published html file to load the movie, however, the arrow keys no
longer work, and I still see no nav buttons. Is the template bad?
I've read several tutorials on creating a slide presentation and
I've followed all the steps. I'm just beginning with action script,
so I'm obtuse about these things.
Thanks

It is hard to tell the problem by just your description. If
you could post your file it would be a great help. Only thing I can
suggest is looking for any stop(); actions in your timeline.
At the end of your movie if you don't use a stop(); action it
should loop forever.

How to Control Volume on GX-740?

How do i up the volume or make it less loud?
The only thing i can find is the windows volume control icon. Not a hardware button/slider.
How?

ah, its with the function button combo.
Sorry for not looking in the manual
I do have another problem, sometimes i dont hear the windows click sound. Its like the sound system puts itself on standby and some time later it gets on again. i dont see a reason why i else wont hear sounds, and the other times i do hear them. (not only with click sounds, also happened with trash can ect.)

Flash slide presentation

Hey hi
I am trying to make a slideshow/movie with the slide
presentation feature. I use flash cs3 on a mac, but I don't think
that matters ?
I have put all my photos I am using onto into individual
slides. I have set cue points.
When i test it, nothing happens. It doesnt go to the next
slide.
I am trying to redo the opening on
mogullife.com but with more photos
and a different song. I have done exactly what I want done on a
keynote presentation, but when I export it to flash, the
transitions will not work, so I am here.
Can someone please point me in the right direction? You can
message me on here or on ichat or on myspace or email or call or
snailmail. Anything. I really wanted to do this soon.
Thank you in advance for any help.
samantha
myspace.com/samanthadarling

From your description, it sounds like you have each of these
5 screens
stacked one on top of the other, maybe each is in a different
layer,
maybe some other method.
It sounds like you are setting the alpha property of the
clips or the
individual elements to 0. If that's the case, then, yes, the
buttons
will remain active. If you change the visible property to
false, the
buttons will not be active.
Another method for showing this content would be to place
each screen's
content on a separate frame. So that you have only the
content that you
want on any given frame. Then you can navigate from frame to
frame
without concern for the other content.
Rob
Rob Dillon
Adobe Community Expert
http://www.ddg-designs.com
412-243-9119
http://www.macromedia.com/software/trial/

NB520, NB550D - how to control volume at Sleep and Music state?

I'm looking for a possibility to control volume at Sleep and Music state...
The only fact I've noticed is that volume depends on the level set when the computer was working. But how can I change it at Sleep and Music state when the comp is swich off?

Hi TomPL,
I have checked the user manual and found the following information:
The volume adjustment and mute setting might be different between Windows mode and Sleep and Music mode. Before connecting the audio device to the computer, turn down the volume of the audio device. Sound quality may also be different.
So according this information you have to set the volume in Windows but it could be a little bit different. I found no information about changing the volume in sleep and music mode.

How to control volume in YouTube on iPad, on-screen?

How can I access the volume control sliders when listening to YouTube videos on my iPad? (Not the hardware buttons)

Alfred DeRose wrote:
Put the video into full-creeen mode and the volume slider is there.
I tried that (full screen mode). There was not (that I could see) any volume slider in a YouTube video when viewed in full screen. This is the case for both my iPad and iPhone (both running iOS7).
Alfred DeRose wrote:
You can also swipe up on the screen to show Control Center. The sliders are also there.
And this is odd. While I can do this on my iPhone while the video is playing, the little tab at the bottom of the iPad screen will NOT come up while the video is playing. I can swipe to get the top tap to appear but not the bottom one. I played around with the bottom tab on the iPad and found that when I'm on a 'wallpaper' screen or viewing the contents of one of my app 'folders' then I can swipe to get the bottom tab to appear, but (apparently) not while the app is running.
Odd that it works differently on the iPhone vs. the iPad. (???)

How to control volume during call when hard buttons don't work?

I was wondering if there is another way to increase the volume during a call when the hard + volume button does not work. Only the - volume button works. Is there possibly an on screen volume button or another screen I can go to for in call volume control. While on a call using the speaker, the volume is so low I can barely hear the person I'm talking to but I can't increase the volume anywhere. Please help! It's so frustrating when you're using the speaker phone and you can't hear anything. What's the point?? I also decreased the volume on a regular call while testing the buttons and now that's so low I can't hear that way either. Help!

Double-click the Home button, swipe the icons at the bottom of the screen to the right twice and it should show a volume slider. Adjust the volume then press the Home button.

How to control volume so that all songs play at the same level

using itunes 11.4. How do I control the volume so that all songs play at the same level?

GO to the preferences in itunes or press (cmd+,)/playback and turn on sound check. If you want to same in other ios devices go to settings/music/sound check turn on

How to control volume in multi-room setup, with different tunes in each room?

Hi,
I'm thinking of replacing my Squeezebox / SqueezeServer setup and have therefore bought two Apple TV's to experiment with.
I have a Windows Home Server on which I've installed iTunes 10.5 yesterday and I can (through RDC) use it to share music to the Apple TVs and even control the volume.
However, playing music this way is by no means what I was hoping for - I want to be able to play DIFFERENT tunes in DIFFERENT rooms.
Yes, that is possible through the use of my iPhone, using Remote to choose the iTunes server (the real server in this case).
But, and here's my issue - when playing different tunes in different rooms (using the Remote app connected to my iTunes server), how do I control the VOLUME for each Apple TV? Or should I play the different tunes for different rooms in a different way?
Kind regards
Niclas

Thanks!
Yes I hope they develop either the Apple TV or Airport express or iTunes or all into a complete multi room music listening experience just like the Squeezebox / Sonos product range. They certainly have the possibility and they did try. Except they didn't make it all the way. It's fine to be able to play the same music in all rooms, but better still would be if I could play different music in different rooms AND change the volume without the need of an additional display or anything. The nice thing would be to have an airport express connected to a small amp with in-ceiling mounted speakers in e.g. the bathroom, the kids room etc. And the kids then control their own music, the bathroom has some rain forest sounds, but when I enter it, I change to the party music I was listening to in the living room, so as to get in the mood for tonights party... And when I'm ready in the bathroom, I switch back to the rain forest sound and one of the kids are so annoyed with the pumping bass from his brothers room, that he syncs to the same music, all the while I go into the kitchen and sync the kitchen with the living room and turn up the knob another notch or two.
This is the way my house works now and I can really see it work like that with Apples products, except they haven't done it all the way yet then. Too bad - I have only used the Apple TV's two days and started to like them.

How to control volume with apple tv remote to mac

My Apple TV remote is controling the volume to my Macbook pro and I don't want it to. help?

On Mac go into system preferences - security - general. Click on the padlock (bottom right) in order to select the advanced button. Check disable remote control infrared receiver

Flash Slide Presentation...how to control volume?

Similar Messages

Maybe you are looking for