Flash sound not working - everything else is

I'd like to start out by mentioning that I realize there has probably been posts about this in the past, I know I've googled one. But the information didn't help, so I thought I'd start a thread about in hope that someone may be able to help.
This is off a new instilation of Arch Linux 64 bit, and as the Subject says I can't get sound from any flash video, etc from a webpage. Everything else works, amarok, videos off the drive, games, etc. I've tried reinstalling flash through pacman, didn't work. I tried installing flashsupport through pacman, didn't work. I tried the beta drivers of flash, didn't work.
Now, what I tried last night did work, so it seemed. I blacklisted oss, rebooted. I had then working flash, and I could play music from amarok at the same time. That was all I was able to test at that time. Only thing that I found odd was when I did that, I had lost the little tune that plays when you enter and exit KDE. It also notified me that one of my Audio devices had stopped working. Now, this morning, I logged in. Same no little tune, same notification from KDE that a device isn't working, actually two times it notified me. I then tried amarok. No sound. I tried flash, no sound. I went into the system settings, fooled around with the devices. The device that works was at the top of the list where it should be. I tested the sound, it worked there. I closed out of it, was trying sound again, nothing.  I went back to the multimedia in system settings, now the sound won't work when I hit test. I look in the Kinfocenter under my sound, and my sound driver is ALSA like it should be, but under sections like MIDI device, and Mixers, it's coplaining about them not being enabled in config. Which I know before I blacklisted OSS, they where.
So, I did the only thing I could think of, and un-blacklist OSS, reboot. I come back in, and it's still complaining about a sound device not working, no intro sound. I go back to system setting -> multimedia, make sure my preferred device is at the top, test the sound. Ok working. I test amarok, working. Video, working. I log off, and back in. I got the intro sound, there was no notification that a sound device isn't working. Checked kinfocenter, everything seems to be there, my mixer is back and configured, etc. Everything is back to normal, except sound in flash. So I'm right back where I started, minus my confusion as to why when I un-blacklisted, and rebooted it was still giving me issues at first.
I've also read up about dmix, but it says that with ALSA 1.0.9rc2 and higher, it doesn't need to be enabled, since it already is automatically. Considering I have ALSA 1.0.21, I don't think that's the issue.
So, does anyone have any suggestions as to what I can try, or do to fix this? Any help would be greatly appreciated, thanks.

Just wanted to thankyou for the link. From using the fuser -v /dev/snd/* /dev/dsp* command, I was able to do a couple days of research, the command told me flash was trying to use /dev/dsp, so I had to reinstall the alsa-oss package, that seemed to fix it for a while. But the next day it was back, I blacklisted oss again, and then the key here that I think really may have fixed it is that apparently under my modconfig file I had to make it load my soundcard first, it wasn't even in there. ALSA was trying to use my onboard soundcard, and my pci sound card. Alsamixer was using my onboard, but most everything else was using my normal card. I'm thinking that when flash was playing, it somehow decided to use my onboard instead. That's my thoughts anyways.
Last edited by Meister (2010-05-13 18:27:36)

Similar Messages

  • Mail not working - everything else is working

    I am unable to use iCloud mail either on my iPhone or on iCloud.com.  My calendar and contacts are syning no problem - but mail won't open.  I think it has something to do with the fact that when I first set it up I didn't choose a me.com e-mail address.  I did that later after the account was setup - now the mail portion is not working.  I have deleted the account from my iPhone - restarted my iPhone - same results.

    SFJenn,
    Thanks! I had been configuring and deleting and configuring again the account, and I just found that the "push mail" function is not allowed on my company Outlook/exchange server, and according to IT, there is nothing we can do.
    Does any one knows if this is correct?
    Yami

  • Finder not working / Everything else is fine

    My desktop is empty, except for the spinning beachball; ForceQuit shows Finder as "not responding." The Dock and all other programs are working fine.
    I know what caused the problem: I inadvertently flooded my desktop by saving thousands of files onto it -- from Quicktime I chose "Save as JPG Sequence" for exporting a 5 minute video clip (I'm trying to export a Flash animation in a state that will load onto YouTube, and have been trying everything! Had no idea this option was going to create thousands of separate files).
    So anyway, I need to delete these thousands of files from my desktop, and then (I hope) everything will be fine. Thing is, I don't know how to get at them to delete them. There's got to be an easy way...I can see the files when I go into other programs and choose "Open" and navigate to the desktop.
    Advice please. Thanks!

    I was excited to see this response because it sounded like the solution I needed. But it didn't work. We're running 10.4.11. My husband tried to copy more than several hundred jpg files to the finder by accident. When he realized what was happening, he canceled the action (he THINKS he canceled it before 150 files could have been copied, but he can't be sure). Now his hard disk icon does not appear on the desktop, though it does appear in a strange new window (along with a Network icon). He CAN access files and applications, and even run several applications, but can't get the hard disk back on the desktop.
    I followed the instructions referred to here, but when I ran the script, I got this error message:
    mv: rename (Users/usersname/Desktop/*.jpg to /Users/usersname/Desktop/DesktopItems/*.jpg: No such file or directory. (I've replaced his name with "username" in the above.) A DesktopItems folder did get created on the desktop, but it's empty.
    Other things I've tried: Starting up from the installation disk and running Disk Utility to repair permissions and Repair disk (it needed no repair) and reset the startup disk; reinstalling OS 10.4.6 and then upgrading to 10.4.11; used Onyx to verify the disk (it says it's okay).
    One other weirdness has started -- his Logitech wireless keyboard seems to have loss some of its key mapping. The Alt (Command) key is acting like the Start (Option) key and vice versa. But this might not have anything to do with the big problem of a malfunctioning Finder.
    Any suggestions will be much appreciated.

  • 3050A scan to computer not working, everything else is fine? what do I do?

    hp 3050a, windows 7
    everything works fine but scan to computer is not finding the printer. the eprint light is on. this is an initial setup, nothing changed that has caused it to stop functioning, it never did.

    Try the steps on this post below. It appears as though you have to use HP 'Update IP address' program to add printer instead use window add printer.
     http://h30434.www3.hp.com/t5/Printer-Networking-and-Wireless/quot-The-HP-Deskjet-3050-J610-series-wa...
    Let us know if this works for you.
    If I helped you at all it would be great if you clicked the blue kudos star!
    If I solved your post please mark it as solved to help others.
    I'm a printer tech with HP.

  • My phone doesn't ring when someone is calling, but the sound works otherwise, like the alarm etc. I have tried to fix it in settings but still not working. anyone else have this problem?

    my phone doesn't ring when someone is calling, but the sound works otherwise, like the alarm etc. I have tried to fix it in settings but still not working. anyone else have this problem?

    Thanks so much but none of that helped.  It was driving me crazy because it would back up another external drive.  I just changed the name of the drive from iPhoto/iTunes Library to Media Libraries and IT WORKED!! I guess for some reason it didn't like the drive being called iPhoto or iTunes ???? I don't understand but I have tried so many solutions and exchanging things out but the name change did it????!!!
    Thank you for your help and replying to this.  Guess I made my own issue!

  • Sound not working in flash

    just today the sound in flash on websites stopped working for me. i updated to flash 8 a few days ago, but sound was still working up until yesterday or so. i've repaired permissions and rebooted a couple times but to no avail. i'm out of ideas, and any help would be awesome.

    welp, glad I saw this. I have been wondering why flash sound quit working, and why sound in my video games quit working. I did NOT upgrade my flash player or anything, it just quit. I opened garage band, and it started working.
    what the **** is that about?

  • Message tone, music, lock/keyboard sounds not working...tried everything =[

    Hey all, iPhone 4s has gone mental!
    I have read through many posts on sound not working and i have tried everything, previous back ups, complete restore, clean out the headphone port, hard restore, also the volume buttons on the side when pressed will show ringer but no volume adjustment bar pops up =/ and the change volume with buttons is 'on'
    unless my headphones are plugged in nothing works, except my ringtone.
    any other suggestions to fix this would be massively appreciated =]
    Cheers all

    same with me
    what we should do??

  • Runtime error R6025 message after log on to Vista - Flash Card not working

    Hi
    I'm a newbie & would appreciate any advice.
    I am getting a runtime error message R6025 when I log on to Windows Vista.
    When I click out of the box I then get a message saying Toshiba Flash Card not working.
    I cancel that and my laptop is ok except I don't know if the flashcard is working or not because I don't know what it does.
    Sorry if I sound thick
    Thanks
    Neelie

    Hi
    I found this MS knowledge base article:
    +Description of the R6025 run-time error in Visual C++\+
    http://support.microsoft.com/kb/125749
    But I doubt this description would be useful for you or anyone here. It describes this error in Visual C++ and this is programming language.
    However, I think you should simply reinstall the Value Added Package which you could download firstly from the Toshiba European page.
    At first you have to remove the old Value Added Package from the system, then reboot the notebook and follow with new VAP installation.
    Bye

  • AUDIODG.EXE hogging 80-100% of CPU and sound not working in Vista . . .

    I posted this on a Microsoft Answers Forum but none of the techs or people reading have been able to help so far.  I'm dying to get to the bottom of this:
    Here is my computer:
    MSI K8N Neo4 Platinum
    AMD Athlon 64 3000+
    2GB RAM
    XFX GEFORCE 6600 GT 128MB DDR3 DUAL DVI & TV OUT (PCI-E)
    200GB WD SATA HDD
    500GB WD HDD in external enclosure via USB2
    NEC ND-3520A 16X DVD±RW Dual Layer DVD Burner
    LG CD Burner
    I've been using Vista Home Premium successfully for some time.  Recently, not too long after I did a clean wipe of my OS, my audio would stop working.  The way it would happen is that everything would work fine until I started iTunes or another audio application and when I would hit play, things would lock up.
    Upon inspection of my system resources, I'm noticing that the audio platform for Vista, via the audiodg.exe, is using close to 100% of my CPU resources, even when the computer is making no sound at all.
    I've had a Sound Blaster Live! card in my computer for some time but I was not using it; I use the Realtek AC'97 audio drivers that are on my motherboard instead.  I thought that the conflict may be the computer wanting to recognize my Sound Blaster, so I took it out of my computer but the problem seems to be worse.
    Are there any BIOS setting that need to be adjusted for my sound to start working again?
    I'm very reliant on the audio processing power of my computer (I'm in the radio industry, part-time) and this is a huge drag on my productivity.
    Any tips would be much appreciated.
    REPLY #1:
    Thank you for using Microsoft Answers forum.  I suggest going to the manufacture of your sound card and download the latest drivers and install them.
    MY RESPONSE:
    Good suggestion.  The problem is this:
    I am running on-board audio.  I have an MSI K8N Neo4 Platinum motherboard which runs "Realtek ALC Series AC97 Audio Driver" and there is no version for Vista. They have a version for Windows 2K/XP and one for Windows XP 64bit.
    Should I use on of those and if not, then what?
    UPDATE (from me):
    I took a chance and found a Realtek AC'97 driver for Vista.
    http://drivers.softpedia.com/progDownload/Realtek-AC-97-Audio-Codec-Driver-Vista-6183-Beta-Download-18114.html
    I went to install it and the install hung.  So, I closed one of the install windows and then the InstallShield app continued like it was working.  So, I hit "Restart my computer".  Well, the reboot hung too.  So, I reset the PC manually.
    When the computer came back up, the sound worked.  Hard to tell if this will fix it for good but it's promising.  Chaotic.  Unpredictable.  Annoying.
    REPLY #2:
    Before you tried updating drivers, did you try rebooting 1st?
    I'm just trying to determine if rebooting your system is what resolved the issue - thank you
    UPDATE II (from me):
    My computer is behaving the same way it was before.  AUDIODG.EXE taking up 80-100% of my CPU and the sound not working.
    Any other ideas?

    Small update: Despite my intelligence, good looks and vast experience I use Google sometimes. To my surprise this file turns out to be a Windows one. Here is someone who is much happier, and since it is some way in my line of thinking I'll quote it, but you might take my previous advice as well:
    http://forums.techarena.in/windows-vista-performance/1012315.htm
    "- Open up msconfig.exe > Manage startup programs.
    - Disable ALL Realtek entries
    - Close msconfig.exe
    - Right-click on the speaker icon > Audio devices > Speakers (properties)
    - Go to the enhancements tab
    - Check the box to disable all audio enhancements
    - Close the menu
    - Right-click on the speaker icon > Recording devices
    - Disable all your microphones (yeah..., the actual problem seems to come
    from voice inputs rendering..)
    - Close the menu
    - Restart your computer"

  • Why does flash player not work with facebook?

    Why does flash player not work with fcebook?  Whenever I wish to view a video, I get the message that i need to upgrade my flash player. Then no matter how often I download and install flash player I still get the message that I need to upgrade my flash player.  When I go check which version I have, I always get the message that I have the most current one.  I run Mozilla Firefox with Windows.  I don't know anything else.
    Message was edited by: khettich

    This means you don't have the latest version installed.  Update to 11.9.900.117, and Firefox will allow it: Flash Player Plug-in (All other browsers)

  • Adobe Flash Player not working on any browser in computer

    I really need help flash player not working in any browser in google chrome. For example in http://www.twitch.tv/ You need Adobe Flash Player to watch this video.  Download it from Adobe. I already did everything to fix it shown in support page please help!!!!

    Same problem on the same website here, pls help
    -Hi, i think I've manage to solve the problem by following the instruction on the following page
    http://helpx.adobe.com/flash-player/kb/find-version-flash-player.html
    http://helpx.adobe.com/flash-player/kb/flash-player-games-video-or.html
    remember to restart your browser after doing the steps

  • My video recording sounds not working but other sounds are working fine, I've tried clearing the little mic thing near my earphone hole and had no success can someone please help me out?

    hhi guys
    my video recording sounds not working at all but it's working for other things such as music. I've tried to clear my sound thing near the earphone hole but had no success can someone please help me out?

    Had an Iphone 4 for about 3 months now. This happened to the first one I had and they ended up having to replace it at the apple store just a couple weeks ago 6/2. It happened again last night to my new one. This time i was able to correct it by going to itunes, backing up the phone to icloud, and then restoring the software. Mine did not work with voice memo, but did work with headphones plugged in, and would also work on speaker. I could hear callers but they couldn't hear me. I had purchased a new case (lifeproof case at $79.99) because it comes with plugs that cover the headphone jack, and the charging port, and is also waterproof. I heard that the root cause is due to lint, dirt, etc getting inside the headphone jack. Well, must be something else. It's a 10 days old phone, and has been in this overpriced case the whole time, and I have not used the headphones. I hope this doesn't keep happening.

  • The new version of Adobe Flash Player not working.

    The new version of Adobe Flash Player not working.
    She plants the clock to all videos , advertisements and links. I tried to uninstall and reinstall everything but the result remains unchanged. I am using Windows 8.1 and Mozilla Firefox. I need your help please .
    I'm sorry if i did errors of spelling because I used google translation. I 'm french .

    I finally figured it out. Flash Player had not installed. I had to de-activate Active-X thru the safety tab on the menu bar and then download the Adobe Flash Player and now it's working. I re-activated Active X after I finished installing Flash,. Hope fully everything will keep working fine!

  • HT3180 I just updated my Apple TV 2 and now it is flashing and not working at all.  Help

    I just updated my Apple TV 2 and now it is flashing and not working at all.  Help

    I just did the update to version 5.2 on our ATV2 and now I'm having the exact same problem as the OP- all attempts to access any iTunes services i.e. Movies or TV result in dropping back to the ATV Main menu.   Per Winston's suggestion, I logged out of iTunes and then tried to log back in.  I am getting a message "the server is not responding- please try again later".
    FWIW- all my non-iTunes services on the ATV are working fine- i.e. Netflix and YouTube.
    Sounds like the update has overwhelmed the Apple servers.
    Dave

  • HELP iPad mini sound not working

    We just bought our daughter her iPad mini today and the sound just stopped working. It'll only work with headphones; we never put headphones in prior to the sound not working. I tried resetting the phone and phone settings several times, as well as plugging in and out headphones. I changed the switch on the side to lock rotate. I also turned off the mono sound thing. I am at a loss as to what else there is to do. Any other suggestions? I've been at this for a couple of hours now trying to fix her iPad. Please help!

    Do you get sounds in any apps on the iPad ?
    If you get sound in the Music and Videos apps but not others then have you got notifications muted ? You say that you changed the side switch to rotation lock, but are sounds muted ? The switch on the side of the iPad controls either rotation or mute, the function that it isn't controlling is set via the iPad's control centre : swipe up from the bottom edge of the iPad's screen and it's the right-most of the 5 icons in the middle of it (if the icon is white then it's 'on', tap it to turn it grey and 'off').
    Notification mute and rotation lock : http://support.apple.com/kb/HT4085

Maybe you are looking for

  • Calendar date prompts

    I am on 11.1.1.5. I am creating two calendar date prompts begin date and end date for an analysis. I want to be able to generate some kind error message or warning if the user tries to enter a date smaller than begin date in end date prompt. How can

  • CS4 Photoshop crash on G5, how to fix?

    Once again, I have a problem with CS4 Photoshop on Leopard 10.5.8. Photoshop crashed while opening a file. It actually froze and I pushed the magic button. Now every time I try to open a file in Photoshop the app crashes. I've uninstalled and reinsta

  • Import Error Every Time

    I am just trying to import footage into FCPX. I have the latest updates already installed. The footage is coming straight from a T2i using multiple SD cards (So it isn't the card.) Every single time I try to use "Import Media" in FCPX I get "Import F

  • CS3/CC Compatibility Question

    I have a web template created in CS3.  When I edit the template in CC and change some fonts save and publish I get the following: ArgumentError: Error #2109: Frame label s1 not found in scene s1.   at flash.display::MovieClip/gotoAndPlay()   at main1

  • Location of reset bttn

    my bb curve 8530 keeps saying   app error 200 reset what do i do wheres the reset button