Flash sound problem in wondows 7

i have some problems with Mozilla from the last update
my OS is windows 7 ultimate ( with all the updates )
the problem is with sound in flash ( like YouTube )
if i open Mozilla and open a YouTube URL its all OK until i change the sound settings from this place ( if i add or remove bass boost or other ) after i change and apply the settings there is no sound
before the update in the volume mixer there was NO Mozilla Firefox it was just plugin Container for Firefox and it was all OK now there is NO plugin Container its just Mozilla Firefox and i have no sound if i change the settings
before the update i had no problems with the sound if i changed the settings now if i change the settings i need to restart Firefox to have sound
here are some prints to see what is all about:
http://img192.imageshack.us/img192/415/11111tg.jpg
http://img819.imageshack.us/img819/5963/22222222222c.jpg
http://img834.imageshack.us/img834/2900/settingsdp.jpg
Alex

Yes I am having issue with streaming media....CDs and MP3 works fine. 
which streaming issues?
"A programmer is just a tool which converts caffeine into code" CLIP- Stellvertreter http://www.winvistaside.de/

Similar Messages

  • Sound Problem Plus Memory Problem

    I've also posted this same issue at the EVGA website with no help what so ever yet. Also if it's ok I'm having the above mentioned memory problem that it probable not related but if anyone does have good input I would love to hear. Hope this doesn't break any rules, didn't see anything in the listed rules thread. So here it goes.
    Ok I'm having a few minor but very perplexing and annoying problems. I have recently built a new rig to include the following.
    Windows 7 64 bit Home Edition
    EVGA P55 FTW Intel P55 Socket LGA56
    Intel Core i5-750 2.66Ghz 8M LGA56 CPU
    Corsair Dominator 4GB DDR3 PC2800 (2 x 2 GB sticks)
    Ultra LSP750 750w Power Supply
    Seagate TB Serial ATA HD 7200/32MB
    Cooler Master HAF 932 Full Tower Black Case
    Galaxy GeForce GTS 250 52MB PCIe x2 (SLI Setup)
    BFG - NVIDIA GeForce 9800 GT GB GDDR3 PCI Express Graphics Card (Physx Setup)
    PROBLEM ONE:
    This one I had a lot less that I was able to actually try because it just confused the crap out of me. So I started by going to test my sound. I'm running an optical cable from the on board sound port to back of my sony surround sound system. I get sound from my left and right channel but nothing from the center, rears or sub. So figure no biggie just need to change the configuration from 2 speaker stereo to 5. surround sound. Guess what... the option isn't there? WTF? A sound card with an optical port with no 5. support? So went online found the drivers for the sound on the mother board and tried reinstalling thinking maybe somthing was wrong with the drivers on the CD. Well it still didn't work. So I figured what ever, I got an external sound card that I know works with Windows 7 since it was on other desktop and hooked it up. Its a Creative - Sound Blaster X-Fi Surround 5. External USB Sound Card. Well it installs fine and I go to test it. Yep you guessed it! Still only sound from the left channel and the right channel with no option for surround sound. So I was able to find updated drivers for that and ran em. Well now I have an option for Surround sound with side speakers only no rear. Oh but it doesn't really matter because the left and right channel are still the only ones able to produce sound. And yes the speakers work I turned on my X-Box 360 hooked up to the same speakers and LCD tv and played COD4 with full sound working fine. So something else has to be happening I just have no idea.
    PROBLEM TWO:
    The second problem was with the memory. Everything booted fine but it initial only detected 2 GB. By the way I had them installed in slots and 3. So I shut down and popped em out checked the copper connectors everything looked fine and reseated the chi
    ps.
    This time during the boot up I checked the BIOS. It saw all 4 GBs of memory. Continued into Windows. Windows now saw all 4 but only .99 GB was available. Now the only other time I've seen anything like this was with on board video sharing the memory, and even then it wasn't half of the systems total memory. I then tried shutting down and putting the chips in 2 and 4 just see what would happen. Well I got an EA post error on the LED, couldn't even boot. So I figured o'well power down completely and tried to run the memory in 2 and 3 to run it out of dual channel. I was able to boot but still had the same issue. .99 GB available and still saw all 4. At this point it was just getting silly so I figured ok I'll download the new BIOS with my laptop, burned it to a CD. Booted the desktop and ran the BIOS flash. Update seemed work fine, honestly the BIOS didn't look much different and I didn't take note of the previous version before I did it so I can only assume it worked. However it did not fix my problem. So I'm still stuck at windows seeing 4 GB of memory with only .99 available.
    Anyway... I'll keep trying to get this working and hunting around online, but I'm really hoping you all have some ideas. I'll be trying to call EVGA today for some help too and possibly Corsair. Thanks in advance for the help!

    Hello,
    cannot help with the sound problem.
    For memory, I've got almost the same thing but with 4 sticks of 2gb and only 2 detected on an ASUS P7P55D deluxe.
    Bios was my issue but I needed to do this (but with pairs of sticks instead of sticks) after the bios update to finally get my 8gb under windows:
    Make a clear cmos. Then boot the computer with only one stick of ram in the port .
    If everything is fine, turn off and add the other port of the same color for dual channel.
    If it does not boot with the 2 sticks in the port of the good color, try to switch ports again. Maybe one stick is dead?

  • No Flash Sound on YouTube

    HP Pavilion Entertainment PC dv9700
    Service Tag dv9910us
    Window 7 Ultimate 32-bit. 
    Get no Flash sound on YouTube or CNN.  Get good sound from YouTube videos saved to hard drive by Realplayer.   Then the saved YouTube video plays everywhere: Windows Media Player, VLC and Realplayer.  I recall the YouTube sound disappeared in the last weekend of Nov 2011 when Flash was automatically updated.  At first it was intermittent and then silent forever.
    So far.  No luck.   I deleted and reinstalled Adobe Flash.  Even tried the Flash Uninstall Utility.  Actually I deleted everything with Adobe listed on it vias Control Panel Uninstall.  I deleted the sound driver for the Conexant High Definition SmartAudio 221 and reinstalled.  I even unpdated it.  I consecutively deleted and downloaded the latest versions of IE, FireFox & Chrome.  I tried Microsoft Fix-It.
    In Device Manager, there are two yellow warnings.  NVIDIA nForce Networking Controller (Code 10) and USB Host Controller (Code 43).  I don't know if one of these can be the issue.
    One weirdo.  Sound worked for 30 seconds one night the first week of March when my wife innocently started to watch YouTube.  When I realized it and called it to her attention, the sound disappeared.  Go figure!
    I'm thinking of restoring Windows 7, but that will create a lot of work for me.
    Any new information on a fix?
    With so many complaints -- it seems -- everywhere, I'm surprised someone like Adobe has fixed the problem?
    Naive question:  Are we locked into Adobe Flash Player for YouTube or CNN?
    Thanks.

    Do you hear audio on either of these two pages?
    Test 1
    Test 2
    Please follow the instructions in this FAQ for a few troubleshooting steps and further details on what we'll need and how to report this issue to us for investigation.
    How do I troubleshoot and report problems with Flash Player Video?
    Thanks,
    Chris

  • OSMF  Flex 4 VideoPlayer sound problem

    Hi,
    It seems that there is a problem with sound in the Spark VideoPlayer in video that's been encoded in H.264.
    If I set 'autoPlay' to 'true' or start playing from the very beginning of the clip, everything works fine.
    But if I set 'autoPlay' to 'false' and start the video not from the beginning, i.e. click somewhere in the seekBar, video is playing, but there is no sound. Once I jump back to the very beginning of the clip the sound appears, and from that point I can play the clip from any section and sound is there.
    Once I reload the video, the story is repeated.
    This happens ONLY with H.264 files and does NOT happen with flv files.
    Also, I don't believe that this problem existed back in the beta version of Flex 4 (previous version of FlashPlayer 10.x.xx.xx), even after the VideoPlayer became OSMF based.
    FTQuest

    Good evening Brian,
    After installing the latest Flash Player from the Adobe labs and switching to the latest nightly build of Flex SDK the sound problem is gone.
    But I've run into another one: I make a simple OSMF player in Flash CS5 and it works fine within the Flash and also when I open the resulting SWF in stand alone Flash Player.
    Yet, when I try to open the swf from within the Flex 4 application, using mx:SWFLoader I get the following error: VerifyError: Error #1053: Illegal override of synthesizer in org.osmf.layout.LayoutMetadata.
    Any advice on that?
    Thanks,
    FTQuest
    P.S. Also, for some reasons setting the 'autoPlay' on MediaPlayer to 'false' doesn't prevent the video from instant playing.

  • Pixelation problems occurs in my videos when using adobe flash but using chromes pepper flash no problemes so its definitely adobe problems on my WIndows 8.1

    pixelation problems occurs in my videos when using adobe flash but using chromes pepper flash no problemes so its definitely adobe problems on my WIndows 8.1

    Problem is:
    Flash Player for IE11 (which is the worst browser ever developed - BAR NONE) is a Microsoft product, when it comes right down to it.
    Adobe writes the base code and yes, they do collaborate on updates for it, but the gang in Redmond alter the plug-in and add "proprietary" code before embedding it, and at that point it's "their baby".
    There are two (2) registry keys - 1 for 32 bit IE and the other for 64 bit IE, as well as a KB patch that prevent all but the most experienced Windows users from ever touching the Flash Player plug-in for IE. So there's NO WAY you could have done a clean install of the ActiveX plug-in in Windows 8. Unless you're an uber-geek, you can only update it through Windows Update.
    WIn 8 is an abomination and IE11 made it worse. IE has always been the "problem child" of browsers, failing to handle CSS, Javascript, some PHP and most design "tweaks" that good webmasters can use with other browsers, trouble free.
    I have IE8 on XP, 9 on VIsta, 11 on 7, 10 on 8 and 11 on 8.1... but they're all for testing only. I'd have to be out of my mind to ever think of using IE as my primary browser. ActiveX controls have to be disabled formost stuff and that opens millions of security holes in IE.
    You've got a good video card and a decent sound card. It's a shame to waste them on a pile of garbage like IE, just because it came with Windows.

  • Sound problem in HP Pavillion dv9810us Notebook PC

    Hi :
    For last more than 8 months I am having this problem.  First  problem started with skype call.  My laptop lost its speaker and showed a red X mark next to sound icon.  I couldn't find any thing to fix the problem, so I did system recovery to factory setting.  After that my computer downloaded windows update and security updates for vista.  It upgraded my vista service pack 1 to service pack 2.  In middle of this downloading stage several times I lost sound and then again got back it and again lost.  I couldn't find any good solution.  It is so frustrating that I can't view any videos in internet explorer which is upgraded to 9 now .  I tried to watch videos in FIREFOX or Google Chrome.  But no sound after few minutes watching.  Every time I lost sound I tried to fix with microsft system restore or sound hardware restallation or total system recovery to factory setting.  Nothing solve my problem permanantly.  I contact with Microsfot vista forum, but no solutions actually fix my audio problem.   At this moment my sound icon has red X mark . 
    This morning when I started my laptop it was ok with sound, I watched one news on Yahoo.  But after that the same sound problem.  In the mean time my computer downloaded vista updates automatically and installed it.  When computer restarted  my sound icon got red X mark.  I don't understand why with some windows updates take my sound off.  If I don't want to install those updates, still the sound went off when I watch videos on yahoo or Youtube.  It says Yahoo is not responding, sometimes it says internet explorer is not responding.  I followed all kind of solution that I got from microsft vista forum but nothing worked out.  I don't know how I can fix this problem.
    This question was solved.
    View Solution.

    Quick and easy fix is to buy a cheap USB sound card (it resembles a flash drive).  Just do a google search and you should find one for $2 to $3.
    I had the same problem where my sound disappeared and would intermittently work when I rebooted until finally it quit and rebooting wouldn't help.  It seemed to have happened after a windows update AND after having errors with the QuickTouch On Screen Display. Upon research, I discovered many people had the exact same problem with this model.  
    I used Restore Manager to restore the drivers for the QTOSD and for the sound card and although I stopped getting errors for the QTOSD, it did not fix the sound.  My quick and easy resolution to my sound problem was to purchase a USB sound card online for $2.49 at Overstock dot com.  I also bought one from a local computer store, MicroCenter, that I liked better (because it had a long cord) for $10.  My sound works perfect now; HOWEVER, I just realized tonight that I NO LONGER HAVE A DIAL UP MODEM EITHER.       You should check to see if yours is still visible in Device Manager or in your dial up connections if you have one.  I suspect the problems I had also killed my modem beyond detection because it's also a Conexant HDAUDIO Soft Data Fax Modem with SmartCP (the sound card driver is also Conexant HD).  The Restore Manager won't reinstall the drivers because it doesn't see the device.  It's too expensive to repair the motherboard and I don't have to have the dial up modem so for now I will just enjoy sound and my laptop for as long as it continues to live.  
    Again, just buy a cheap USB sound card (it looks similar to a flash drive) for a quick and easy fix.  I hope this helps.  Good luck.  I hope you don't have other issues resulting from this as I did..

  • HT4085 SOUND problem in IPAD3

    Ive got an iPad3 with no audio in music, videos, apps, Safari, ect. But when I go into sound setting and move the sound bar I hear sound. Also when plugging in to recharge I hear that recharging beep. Also if I plug in the earbuds I hear sound. anyone can help :?

    Quick and easy fix is to buy a cheap USB sound card (it resembles a flash drive).  Just do a google search and you should find one for $2 to $3.
    I had the same problem where my sound disappeared and would intermittently work when I rebooted until finally it quit and rebooting wouldn't help.  It seemed to have happened after a windows update AND after having errors with the QuickTouch On Screen Display. Upon research, I discovered many people had the exact same problem with this model.  
    I used Restore Manager to restore the drivers for the QTOSD and for the sound card and although I stopped getting errors for the QTOSD, it did not fix the sound.  My quick and easy resolution to my sound problem was to purchase a USB sound card online for $2.49 at Overstock dot com.  I also bought one from a local computer store, MicroCenter, that I liked better (because it had a long cord) for $10.  My sound works perfect now; HOWEVER, I just realized tonight that I NO LONGER HAVE A DIAL UP MODEM EITHER.       You should check to see if yours is still visible in Device Manager or in your dial up connections if you have one.  I suspect the problems I had also killed my modem beyond detection because it's also a Conexant HDAUDIO Soft Data Fax Modem with SmartCP (the sound card driver is also Conexant HD).  The Restore Manager won't reinstall the drivers because it doesn't see the device.  It's too expensive to repair the motherboard and I don't have to have the dial up modem so for now I will just enjoy sound and my laptop for as long as it continues to live.  
    Again, just buy a cheap USB sound card (it looks similar to a flash drive) for a quick and easy fix.  I hope this helps.  Good luck.  I hope you don't have other issues resulting from this as I did..

  • I have sound problem in My Cq40-144TU Laptop

    Hi,
    I have Cq40-144tu laptop. i am't hearing sound from internal speaker but sound is hearing from headphone. I have configured my system many time. Last got to shop and they also format it and reconfigured but still this problem is showing. 
    But I was hearing sound from speaker when i chat in gtalk and then i heared sound from window media player and other application also for 5 to 10 second only. every time some text is recieved i hear sound for 5 to 10 second.
    please tell me what is problem in My Laptop. i have window 7 ultimate operating system.
    Please help me sir

    What sound problem - no sound on anything, no sound on some apps ?
    Have you got notifications muted ? Only notifications (including games) get muted, so the iPod and Videos apps, and headphones, still get sound.
    Depending on what you've got Settings > General > Use Side Switch To set to (mute or rotation lock), then you can mute notifications by the switch on the right hand side of the iPad, or via the taskbar : double-click the home button; slide from the left; and it's the icon far left; press home again to exit the taskbar. The function that isn't on the side switch is set via the taskbar instead : http://support.apple.com/kb/HT4085
    And for future info typing in all capitals is considered to be SHOUTING

  • Desperately need some help!! iTunes/Quicktime/iChat/Sound problems....

    So, yesterday, I was online, on google video, and when I pressed play on the video, there was no sound, but the video worked...the same was true on every video site i checked. My computer volume was at max, and I even tested the speakers to make sure they were on, and they indeed were.
    I thought that was odd...but then the problems really started.....
    After that, I clicked on my iChat icon. It bounced once, and did not open. The same thing happened when I clicked on iTunes. 1 bounce, and then nothing. I checked to make sure all of my iTunes mp3 files were on my computer....they indeed are all still here, bit nothing I can do opens iTunes. I've run disc utilities, and disc repair...according to that, everything is peachy-keen on my computer.....but iChat and iTunes STILL will not open, and there is still no sound on anything.
    Now, i'm leaning towards the archive and install option....or even just backing up what I want to save, wiping the drive, and starting from scratch.....but i'd really like to not have that happen.
    (and, as a side question, if all I want to save are images, several documents, and many mp3 files, would everything be okay if I just backed them up on an external drive, and then loaded them back on to my computer after reinstalling OS X?)
    Sorry about the length of this, but I am at my wit's end, and I have no idea what to do.

    by third-party, do you mean things I installed that are not manufactured by mac? If that is the case, I have microsoft office, Smart Music, Flip4mac, and Senuti.
    I got rid of Flip4Mac to see if that affected my sound problems, but it did not. So, as of now, my problem remains the same...

  • HT3983 i have a sound problem when i install windows 7 32 bit on my imac

    i have a sound problem when i install windows 7 32 bit on my imac

    Did you download and install the Windows Support software? First step in Bootcamp Assistant is to download the support software. Then did you install the support software from within Windows?
    Read the Bootcamp Install instructions. http://manuals.info.apple.com/en_US/boot_camp_install-setup_10.7.pdf

  • Sound problems on ProBook 6550b, running on Win 7 Pro x32bit..

    I have been getting very similar sound problems on my notebook as posted by most: internal speakers work on original Audio HD drivers, but there is no sound when I connect external speakers or headphones. I up-graded the audio drivers to IDT HD Audio and I get sound coming from external speakers or headphones, but nothing from internal speakers.
    I have tried everything from reporting the problem on public forums, live help, and done this or that, but nothing changes. It's so very clear to me that it has to do with audio drivers, which don't seem to work appropriately to cover all aspects of sound output.
    I also, often, get this loud, weird, irritating noise and a frozen PC when I am playing music with the notebook, while on the internet. The best I do is not to do both at the same time. I have seen similar problems on blogs, but tangible solutions are NOT offered!!!! Please help...

    Audio Switching coudl be due to several reason. if you have tried latest audio drivers and latest Video drivers from hp.com, i suggest you to get audio board replaced for your computer.
    Hope it helps.
    Regards,
    Waseem,
    I work for HP.
    **Click the KUDOS star on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
    Regards,
    WW
    “I am an HP Employee“
    ***** Click the KUDOS star on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem***

  • When I delete com.apple.audio.SystemSettings.plist my audio/sound problems are solved. However when the file is replaced with another file, the sound is crappy and the quality is reduced. Can you please help me?

    When I delete com.apple.audio.SystemSettings.plist my audio/sound problems are solved. However when the file is replaced with another file, the sound is crappy and the quality is reduced. Can anyone please help me?
    Sincerely,
    Eric

    Run this when you have the problem and post the results here.
    EtreCheck
    This will tell us what is loaded

  • Any resolution to the sound problem?

    I have been having the same sound problem with my Mid 2010 Mac Pro tower ever since I got it.  I have been in touch with Apple and have been told that they are familiar with the problem, but that they are still working on a fix.  The problem is that I have external speakers, and every time I shut down and then start up again, I have to go to preferences and physically change the sound output to go to the speakers.  I have also been tole that the Mac is supposed to sense the external speakers and go directly to them.
    Is there anybody else out there with this problem, and has been able to resolve it?
    Thank you.

    I have a 2010 Mac Pro and use the stereo line out jack in the back of my machine for my speakers with no problem.  I don't recall any problems setting it up.  But check the Audio MIDI Setup (in your utilities folder) to see if you can set it from there (should be able to).  Not sure why the preference wouldn't stick.  And I don't believe there is automatic detection of an attached sound output device where the sound preference switches to that (unless maybe the front jack which I never use).

  • Please help iPhone 5 sound problems

    iPhone 5 sound problem: my iPhone 5 noise is only coming out thru the ear speaker and will not come out of any of the other speakers on my phone i say again it will ONLY come out my ear speaker it does it in games and in videos in music in everything! Ive reset the phone and went thru all the settings and everything to try to fix with no luck at all please help me!

    fdisk formated and reinstaled windows 3 times. fresh install each time i installed a sound card. so I dont think lingering drivers is the problem which also means dx9 has been installed fresh each time.also I have been dealing with this for nearly a month and I am at a loss.

  • Adobe Flash Player Problem: "Movie Not Loaded"

    new user to mac.
    i'm getting more and more frustrated with this computer.
    what's bugging me the most right now is
    i am unable to view videos on certain websites.
    rather than showing the content,
    a white box appears.
    when i right click on the white box,
    it says "movie not loaded" (in gray) and adobe flash player 9 (in black).
    i can't click on the gray line.
    when i click on the black line, it brings me to the adobe website and tells me adobe flash player 9 has been successfully installed.
    i am fairly sure this has nothing to do with heavy traffic.
    any insights on how to resolve this issue?
    cheers.

    Adobe Flash Player Problem
    http://www.adobeforums.com

Maybe you are looking for

  • How do I add animated .gif files to a JFrame?

    Hi, I'm making an underwater scene in java for my degree assignment. I have a JFrame with an underwater background and a bunch of .gif fish moving around inside, but they should be animated and they're not. They animate outside of java. How can I mak

  • Most recent episode not automatically downloading

    Hello, My podcast seems to be valid according to feedvalidator.org, but it's not automatically downloading the most recent episode when I subscribe to it. I've read about other's having this same issue but it was always because they had errors in the

  • Trade-in problem at store 552

    Hello. I have problem trade-in my tablet under the current "Get a guaranteed minimum $50 gift card" promotion.  I went to store 552 on 6/20 with a like-new 1st gen Kindle fire. I was told the trade-in must include cable and charger. The lady at custo

  • File is too large for attachment - BO Integration Error

    I developed Crystal reports (using Universe)in CR XIR2 and deployed in BO XIR 2 Repository. Reports database is -DB2. I am able to preview the reports in CMC/Infoview. But when we are integrating our Application(Called GBS) to BO ,and when I am tryin

  • Is it possible to create items (textitem) dinamically in runtime?

    is it possible?