Flash swf not running properly in captivate

Hi,
I'm not sure if this is a flash question or a captivate question so I'm posting it to both forums. I have numerous flash cs5 built swfs inserted into a captivate 5 project. All of them are running fine apart from this one. It runs perfectly outside of captivate but within the captivate swf it goes haywire. It's a very simple fla. The only actionscript involved is a stop action. There is a movie clip that uses a number of classic tweens and then there is a layer containing textual explanations for what's happening in the movie clip. When I run my captivate project the swf does one or other of the following:
a) it runs but the movie clip starts earlier than the text and so they are out of synch
b) the text runs as normal but the movie clip does not run at all
c) it only shows the final frame of the swf and nothing else happens.
As I say, it is a very simple fla and I'm at my wits end trying to figure out what's wrong. I don't seem to be able to attach the fla here, so if anybody thinks they may be able to help please pm me with your email address and I will email you the fla file.
Just to note some of the things I have already considered: the text is all set to classic rather than TLF. The captivate project and the fla both publish as3 at 12fps for flash player 9.
yours hopefully!
Maedhbh

See http://forums.adobe.com/message/3327323. I am having the same problem and this may help you out.

Similar Messages

Flash cs5 swf not running properly in captivate 5

Hi,
I'm not sure if this is a flash question or a captivate question so I'm posting it to both forums. I have numerous flash cs5 built swfs inserted into a captivate 5 project. All of them are running fine apart from this one. It runs perfectly outside of captivate but within the captivate swf it goes haywire. It's a very simple fla. The only actionscript involved is a stop action. There is a movie clip that uses a number of classic tweens and then there is a layer containing textual explanations for what's happening in the movie clip. When I run my captivate project the swf does one or other of the following:
a) it runs but the movie clip starts earlier than the text and so they are out of synch
b) the text runs as normal but the movie clip does not run at all
c) it only shows the final frame of the swf and nothing else happens.
As I say, it is a very simple fla and I'm at my wits end trying to figure out what's wrong. I don't seem to be able to attach the fla here, so if anybody thinks they may be able to help please pm me with your email address and I will email you the fla file.
Just to note some of the things I have already considered: the text is all set to classic rather than TLF. The captivate project and the fla both publish as3 at 12fps for flash player 9.
yours hopefully!
Maedhbh

See http://forums.adobe.com/message/3327323. I am having the same problem and this may help you out.

Captivate project not running properly on iPad

Hello,
I built a project using Captivate 7.0. When I published the project, I checked both the SWF and HTML5 boxes so the tutorial would run on an iPad. However, when I view the tutorial on the iPad, the tutorial does not run properly. The pages do not advance (even though, in Captivate, I have the slides advancing automatically - not on mouse clicks), all of the bullets on a slide do not appear, and the narration stops in the middle of a slide and does not resume.
Do you have any suggestions?
Thank you,
Sarah

Hi Joel,
I removed all bullet animations and re-published the project (I checked the "Force re-publish all the slides"). My tutorial runs on an iPad, without the slides hanging up. It appears removing the bullet annimations solved that issue. Thanks for the suggestion.
However, neither my music introduction on the first slide nor my narration on subsequent slides comes in. I confirmed I do not have "mute" on and that my volume is up. Also, I confirmed the sound works by running the tutorial on my desktop.
Do you have any ideas?
Thanks,
Sarah

FOR ALL ENTRIES stmnt. in SELECT query is not running properly

Hello experts,
          In my report program, I write one query on table BSIS.
         Internal table declaration -
       DATA : BEGIN OF DLC_BSIS OCCURS 0,
                        BUKRS LIKE BSIS-BUKRS,
                        GJAHR LIKE BSIS-GJAHR,
                        BELNR LIKE BSIS-BELNR,
                        SHKZG LIKE BSIS-SHKZG,
                        BSCHL LIKE BSIS-BSCHL,
                        AUFNR LIKE BSIS-AUFNR,
                        HKONT LIKE BSIS-HKONT,
                        QSSKZ LIKE BSIS-QSSKZ,
                        DMBTR LIKE BSIS-DMBTR,
                   END OF DLC_BSIS.
Query as follows --
         SELECT BUKRS
                       GJAHR
                       BELNR
                       AHKZG
                       BSCHL
                       AUFNR
                       HKONT
                       QSSKZ
                        DMBTR FROM BSIS
                                  INTO TABLE DLC_BSIS
                                 FOR ALL ENTRIES IN IT_BKPF2
                                 WHERE BELNR = IT_BKPF2-BELNR
                                              AND BUKRS = IT_BKPF2-BUKRS
                                              AND GJAHR = IT_BKPF2-GJAHR.
IT_BKPF2 internal table having -- BUKRS - LT01
                                                     BELNR - 6400000061
                                                     GJAHR - 2009.
And in BSIS database table -- 3 entries are there for the above documnet.
But, in my internal only one entry has come for the same above document.
I think For all entries stmnt. is not running properly. But Why it's not running properly.??
What would be the reason..??
Thanks in advance....!!
Regards,
Poonam.

>
Poonam Patil wrote:
> Hello experts,
>           In my report program, I write one query on table BSIS.
>
>          Internal table declaration -
>
>        DATA : BEGIN OF DLC_BSIS OCCURS 0,
>                         BUKRS LIKE BSIS-BUKRS,
>                         GJAHR LIKE BSIS-GJAHR,
>                         BELNR LIKE BSIS-BELNR,
>                         SHKZG LIKE BSIS-SHKZG,
>                         BSCHL LIKE BSIS-BSCHL,
>                         AUFNR LIKE BSIS-AUFNR,
>                         HKONT LIKE BSIS-HKONT,
>                         QSSKZ LIKE BSIS-QSSKZ,
>                         DMBTR LIKE BSIS-DMBTR,
>                    END OF DLC_BSIS.
>
>          Query as follows --
>
>          SELECT BUKRS
>                        GJAHR
>                        BELNR
>                        AHKZG
>                        BSCHL
>                        AUFNR
>                        HKONT
>                        QSSKZ
>                         DMBTR FROM BSIS
>                                   INTO TABLE DLC_BSIS
>                                  FOR ALL ENTRIES IN IT_BKPF2
>                                  WHERE BELNR = IT_BKPF2-BELNR
>                                               AND BUKRS = IT_BKPF2-BUKRS
>                                               AND GJAHR = IT_BKPF2-GJAHR.
>
> IT_BKPF2 internal table having -- BUKRS - LT01
>                                                      BELNR - 6400000061
>                                                      GJAHR - 2009.
>
> And in BSIS database table -- 3 entries are there for the above documnet.
>
> But, in my internal only one entry has come for the same above document.
>
> I think For all entries stmnt. is not running properly. But Why it's not running properly.??
> What would be the reason..??
>
>
> Thanks in advance....!!
>
> Regards,
> Poonam.
include the buzei field in selection criteria i have faced the same situation earlier.
always select all the key fields.
varun

Gimp will not run properly

I just purchased a 24 inch Imac and Gimp will not run properly. I have the latest system updates and firmware. Gimp starts X11 and appears to load, but the only item visible is the Gimp menu, none of the tools. It shows as running in the dock.
If I try to open a graphic with Gimp, it loads but the graphic is not visible and only the Gimp menu is visible in the menu bar. It shows up as running in the dock.
It works fine on a G4 quicksilver. I have the latest version 2.2.11
Thanks,
Fran
IMAG INTEL Mac OS X (10.4)

Hello Francis,
Did Gimp ever load properly? On first load, it should have gone through an installer within X11. Also, I've noticed that my image windows start up hidden. There also may be a bug in which clicking on the Gimp app icon in the dock itself won't bring the windows forward, so you have to use the X11 icon instead. Try using Expose to show all windows in all applications to see if they've opened but sort of "off-screen."
It could be a bad installation, or it could be that somehow the toolbars and palettes, etc. in Gimp just never appeared. Check to make sure X11 is up to date as well. I'm currently running 1.1.3 with XFree86 4.4.0.

Adobe Flash will not Run

I have gone through all the forums and installed and uninstalled flash 3 times. I have gone through the active-x control and still now luck...it wont run although its showing as a successful install. I am running Windows 7 Home Edition with IE 9 version 9.0.8112, 64 bit operating system with 4.00 RAM.
I need help...this is frustrating. I have tried logging onto my son and wife user name on this computer and still flash will not run.
Thanks in advance for the help.

See if any of this helps:
http://forums.adobe.com/thread/885448
http://forums.adobe.com/thread/867968

I have a copy of Web Premium CS3 which was installed on a Windows Vista PC. I have a new Windows 7 PC and the installation disc will not run properly. The installation begins and then asks for the CS3 disc to be inserted. If I re-insert the CD I just g

I have a copy of Web Premium CS3 which was installed on a Windows Vista PC. I have a new Windows 7 PC and the installation disc will not run properly. The installation begins and then asks for the CS3 disc to be inserted. If I re-insert the CD I just get a message asking for the disc to be inserted. any ideas anyone?

Use the download version:
Download CS3 products
Mylenium

Vz protect not running properly

I have the latest version, but it is not running properly (just keeps scanning).
How can I fix this? Should I uninstall and then reinstall? Is there a charge to do that?

hello lhill123, maybe that's an issue with hardware acceleration - first please try [[Upgrade your graphics drivers to use hardware acceleration and WebGL|updating your graphics driver]], or in case this doesn't solve the issue or there is no new version available at the moment, start firefox into safemode '''by pressing the shift key while the application is launching''' & disable hardware acceleration in the firefox ''menu ≡ > options > advanced > general'' (that setting will take a restart of the browser to take effect).
[[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]]

I have bought a iPhone 4 , yesterday . I heard that iOS 7 is not running properly on iPhone 4 , so I have decided to upgrade it to 6.1.2 . Please help to do this.

I have bought a iPhone 4 , yesterday . I heard that iOS 7 is not running properly on iPhone 4 , so I have decided to upgrade it to 6.1.2 . Please help to do this.

YOU CAN'T.
If you upgrade your phone you can only upgrade to iOS 7 and that is it. You can only ever update to the lastest available software, which in this case is iOS 7. You either upgrade to this or not at all because you can't upgrade to anything else.

I defined custom action but it is not running properly.

Hi,
I defined custom action but it is not running properly.
I deployed in MII (System Management --> Custom Actions)
When i use it as an action in a transaction error below generated.
Errors
[ERROR]: STEP EXCEPTION (Custom_Action_0) : Item 'Custom_Action_0' is not an Action
[ERROR]: STEP EXCEPTION (Custom_Action_0) : Item 'Custom_Action_0' is not an Action
Custom action code is below.
package com.wipro.action;
import com.sap.xmii.xacute.actions.ActionReflectionBase;
import com.sap.xmii.xacute.core.ILog;
import com.sap.xmii.xacute.core.Transaction;
@author cemil.bozlagan
public class CustomAction extends ActionReflectionBase {
    private String strFirstInput;
    private String strSecondInput;
    private String strOutString;
    public CustomAction() {
        strFirstInput = "";
        strSecondInput = "";
        strOutString = "";
    @Override
    public String GetIconPath() {
        return "/com/wipro/action/resources/icons/CustomAction.png";
    @Override
    public void Invoke(Transaction trx, ILog ilog) {
        try {
            strOutString = strFirstInput + strSecondInput;
            // This varaible is defined in ActionReflectionBase class
            _success = true;
        } catch (Exception e) {
            _success = false;
    public String getFirstInput() {
        return strFirstInput;
    public void setFirstInput(String strFirstInput) {
        this.strFirstInput = strFirstInput;
    public String getSecondInput() {
        return strSecondInput;
    public void setSecondInput(String strSecondInput) {
        this.strSecondInput = strSecondInput;
    public String getOutString() {
        return strOutString;
    @Override
    public boolean isConfigurable() {
        return false;
How can i solve this problem?
Thanks.

Hi Cemil,
Pls check document, I hv sent to your mail.
May be it helps.
Regards
Padma

Javascript does not run properly in Firefox

Firefox does not run javascript properly.
For example:
http://vk.com/app2622342_40916334#NEW/comp1427
Comment form does not run at all in Firefox ( the last version = 20.0.1)
but runs OK in Opera.
WHY?
Mozilla still is HALF-DONE SOFTWARE!!!!!!!
WHEN YOU DO IT IN A GOOD WAY?

I have javazcript-enabled = TRUE in my about:config. So your comment did not solve my problem. I noticed that javascript does not run properly in some websites (forms in vk.com) but those forms run OK in OPERA - how can you explain this!?
And I have no errors in the Web Console (Firefox/Tools > Web Developer).
I wrote you a link to the page where javascript does not work.
( you need to login to vk.com to see that page
http://vk.com/app2622342_40916334#NEW/comp1427
)

'Mail" not running properly

After updating to Lion (10.7.2), "Mail" will not run properly. For each of my accounts, either the incoming or outgoing servers go offline, and while I can access incoming mail (sometimes), outgoing is impossible. I have deleted and reinstalled all of my accounts. Doesn't help.
Anyone else having issues?

WHOA!!!!! meant to say "After installing LION...."!!!
Sorry.....

[svn:bz-trunk] 13744: Bug: BLZ-481 - AMFConnection JUnit test do not run properly as part of checkintests on Mac (and Windows?)

Revision: 13744
Revision: 13744
Author:   [email protected]
Date:     2010-01-25 01:14:09 -0800 (Mon, 25 Jan 2010)
Log Message:
Bug: BLZ-481 - AMFConnection JUnit test do not run properly as part of checkintests on Mac (and Windows?)
QA: No
Doc: No
Checkintests: Pass
Details:
-Don't start the server before unit task, unit task already checks if the server is not running and starts the server.
-Don't stop the server after FlexUnit tests, JUnit tests need the server running, and they will stop the server after they are done.
Ticket Links:
    http://bugs.adobe.com/jira/browse/BLZ-481
Modified Paths:
    blazeds/trunk/build.xml
    blazeds/trunk/qa/apps/qa-regress/testsuites/flexunit/build.xml

Tony,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
- Check all of the other support tools and options available at
http://support.novell.com.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://support.novell.com/forums)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://support.novell.com/forums/faq_general.html
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

Flash video not running in Captivate 7

Hi. I created an .swf file that has a short Flash video (.flv) file and audio file associated with the very first slide. The audio runs fine, but the .flv file does not run. Instead, I get "connection error" notice where the video should display.
Any clue why this is occurring and how I can get the .flv file to run?
Thanks,
- Michael Fekete

Placing video and audio on the very first slide of a project is never a good idea. Put them on the second slide at least. With video, you might end up significantly delaying the playback start if it's too heavy.
If you're testing this on your local hard drive, your issue might be due to Flash Global Security settings. Read this post:
http://www.infosemantics.com.au/adobe-captivate-troubleshooting/how-to-set-up-flash-global -security
If you're testing this from a web server, your issue might be that the web server is not set up to serve FLV files. Talk to your server admin to verify the FLV mime-type is supported. If you are able to link directly to the FLV file on the web server, try to play it in your browser directly. If that works, then the mime-type is supported but your connection error might be something else, e.g. using spaces in filenames, using mixed case filenames on a web server that doesn't handle mixed case without breaking links etc. Lots of potential reasons.

Applications in CS5.5 Premium Do Not Run Properly

I purchased an upgrade of CS 5.5 Premium to replace CS3 Premium. Everything seemed to install properly, but nothing runs properly. InDesign crashs on startup. Photoshop and Illustrator run, but crash on quit. Dreamweaver hangs during startup without any error notices. I have tried numerous variation on installing, I have use the cleaner, I have done permission repairs, I have done updates that were available. I am running an iMac 3.4 GHz Intel Core i7 with 8 GB RAM. I am beginning to thing the downolad update file was corrupt. Any suggestions?

Hello,
Like Dale314, I have encountered similar strange problems that at first I wrote off to a corrupt file, but when it kept happening only at home and with the same file not my work machine that runs CS5... I started to think otherwise. My most troubling error is my inability to highlight text in Illustrator!
Basically, in Illustrator I create a text box and enter text. When I come back to the box after workiing on other parts of the document, I cannot modify the text unless I can get the text tool "inside"... do a command A, select all, delete all text and write the changes all over or delete one character at a time to get to the spot where I want to start the change. I find this error incredibly frustrating as I have a new iMac, permissions repaired, no 3rd party software other than MS Office and CS5. I've used Illustrator for years, so can't imagine it is something I am doing wrong.
Additionally, I found out today that the project in CS5.5 Flash that I worked on last night for delivery this morning did work on a CS5 Flash machine. I created a loader, expected my swf files to load as they did at home and instead got errors and endless loops.
Totally disappointed in this purchase. I'd like to go back to CS5. Anyone else have these problems? Any solutions would be welcome.

Flash swf not running properly in captivate

Similar Messages

Maybe you are looking for