Flash.system.System.totalMemory different than Windows mem display

Anyone know why flash.system.System.totalMemory is much
different than what I see FlashPlayer taking up in the Windows Task
Manager?
I would expect to see some overhead, but the differences I'm
seeing are quite large (i.e. 80MB vs 150MB).
Thanks

I may have run into something that might be related. The project I am working on was going fine until I added updates and switch from VGA to HDMI. I added the updates via ICE rather than download after install. The OS install went through the normal
routine and rebooted. I removed the installation disk and the system rebooted and started to continue the install process. Then the screen went blank as if the system was going to reboot... nothing. I checked the HDMI output and still nothing. I removed
all the updates and tried again, same exact result. If I power cycle the message says that the install failed.
I went into the BIOS and found the video settings had support for CRT, HDMI and LVDS. I have ran into LVDS issues before. I disable LVDS, and set the system to output from CRT. This time the OS installer worked as expected. My guess is that the video driver
switched to the LVDS screen. You might be getting a video driver update - check the BIOS settings and disable LVDS if enabled.
Sean Liming - Book Author: Starter Guide SIM (WEI), Pro Guide to WE8S & WES 7, Pro Guide to POS for .NET - www.annabooks.com / www.seanliming.com
There's no driver updates, also I don't have the option for LVDS in the bios. The computer has a display port and HDMI, I'm using the HDMI.
I re-imaged the computer and tried updating 1 update at a time to try an isolate the problem. About 5 updates in I realized it would take several hours to complete the job, so I started to group the updates. The problem re-occurred with the following
group of updates.
KB2991963
KB2992611
KB2993958
KB3003743
KB3004361
Unfortunately I don't see a correlation. I re-imaged and re-installed the updates on 3 other identical machines and could not reproduce the problem. Very frustrating...

Similar Messages

  • Times in system.log different than server's clock

    Hello,
    The time that an event is recorded in system.log is different that the current time in the server's clock. For example, there is the entry:
    Dec 7 02:22:42 XServe DirectoryService[52]: Failed Authentication ....
    but the time on the server is Dec 7 12.22:42.
    I use Mac OS X Server 10.4.3.
    Thanks in advance for any suggestions on how to make the times appear correctly in system.log.

    I've tried this:
    I've put log4j.jar to the lib dir of the logicalhost and log4j.properties to another jar (my own) and put it to the lib dir too. I deleted the PropertyCOnfigurator.configure() line from the apps. Built it, manually deleted log4j.jar from the EARs. Then I deployed EARs, restarted the domain and ran the apps. They both logged to the same and correct file, but again the rolling didn't work. How is this possible? I thought that this way the IS should have one and only one instance of Log4j...

  • Is Labview Bitmap format different than Windows?

    I have an issue with my bitmap images (depth bit of 1) saved with LabView and a brady printer I'm sending them too with a Serial VISA.
    I have a VI to create a barcode image and save it as a bitmap. I'm just using the simple graphics Write BMP File VI after a Picture to Pixmap VI. The file looks just fine if opened in MS Paint. Yet when I send it to the printer as a file, it's all garbage.
    If I use the same VI to save the bitmap (depth bit of 4) then open it with MS Paint, then save it as depth bit of 1. I use the same print VI as before, the file prints beautifully.
    If I open the bitmap created by my VI (depth bit 1) and the equal on saved by MS Paint in Notepad I see they are not the same.
    Admittedly I don't know a lot about file structure so probably don't know that I'm doing but any friendly advice would be appreciated. I'll attach the files with a .txt extension so that I can post them.
    Attachments:
    LabView and Paint Bitmaps.zip ‏1 KB

    I see a couple differences in the files.
    The LV bitmap is almost twice as large as the MS Paint bitmap.  Opening them up in Notepad, the crazy characters look different.  The LV bitmap has a long line of spaces at the end of the file, probably why the file is longer.
    I opened both images in LV using the Read Bitmap File and looked at the image cluster.  Both have the same number of pixels (1872) and both have 2 image colors and an image depth of 1.  However for the colors, LV has color 0 as 1677721 and color 1 as 0.  MS paint bitmap is the reverse.  LV pixel 0 is 0 and MS Paint pixel 0 is 255.  (Possibly explained by the different order in the colors?)
    The 2 images look a lot alike in a LabVIEW picture control and in Paint, but the MS paint bitmap has more black pixels making up the characters as compared to the LV bitmap.
    Why the 2 files are inherently different, I don't know.  But perhaps those differences explain why the printer is treating them differently.

  • Ubuntu url command line different than windows

    I have used Firefox for Windows for years.
    I have recently started using it on Ubuntu. Works well.
    I have seen one difference that bugs me.
    It doesn't automatically highlight the URL address when clicked. (see Troubleshooting Information for how to reproduce behavior)
    Any ideas? is there a control or setting that regulates this behavior?
    ==================================
    Four cheers to all who have built and maintained it.

    On Linux you can do that with a double-click: browser.urlbar.doubleClickSelectsAll (true)

  • Launching flash panel from menu other than Window - Extensions

    Hey all,
    I've got 2 related questions:
    is it possible to open flash panel (created with Extension Builder) from a custom menu item?
    can I open multiple swf panels by one menu item? all panels would be defined in one manifest.xml in the same bundle
    thanks a lot!

    Yes, and yes.
    You need to create a startup script to create the menu in the startup script. The script can launch as many extensions as you'd like.
    The only straight-forward way I know to launch extensions from an external script, is by invoking the menu item of the panel.
    FWIW, You will probably get better answers on Extension Builder / CS SDK in the CS SDK forum: http://forums.adobe.com/community/creativesuites/cs_sdk
    Harbs

  • Flash bios of Elite m9467 from windows 7 leads to crashed system

    i tried to flash bios of Elite m9467 from windows 7 following hp site instruction - sytem seems to be dead - can anyone tell me how to use the restore bios fonction of this IPIBL-LB motherboard ?
    thks

    isetta wrote: i tried to flash bios of Elite m9467 from windows 7 following hp site instruction - sytem seems to be dead - can anyone tell me how to use the restore bios fonction of this IPIBL-LB motherboard ? thks
    Hello isetta, I tried to locate the model number you listed on the HP web site and was unable to locate it.
    Can you advise what country you are located in? There seems to be several countries that this model number was sold in.
    It is possible that you have a different operating system than the one needed to flash the BIOS.
    Please click the White Kudos star on the left, to say thanks.
    Please mark Accept As Solution if it solves your problem.

  • Iam not able to share internet in windows 8 from my macbook air...though my iphone ipad is connected to the hotspot well..tried everything but it seems to be different from windows 7  and other microsft operating systems setting. help!!

    Iam not able to share internet in windows 8 from my macbook air...though my iphone ipad is connected to the hotspot well..tried everything but it seems to be different from windows 7  and other microsft operating systems setting. help!!

    Ask on a Windows forum since that's what you're having a problem with.

  • Our system has detected an unauthorized login attempt to your AppIeID from an IP address location different than one you usually use. In order to protect your account, we will disable your AppleID due to our concern for the safety and integrity of the App

    Our system has detected an unauthorized login attempt to your AppIeID from an IP address location different than one you usually use.
    In order to protect your account, we will disable your AppleID due to our concern for the safety and integrity of the AppIe community.
    In order to confirm that you are the rightful owner of this account, we recommend that you click here: My Apple ID.
    I received this e-mail during the night and wondered if is genuine?

    It's a scam to steal your Apple ID and password.
    Delete it.

  • External system returned different number of lines than received error

    Hi,
    While posting invoice in MIRO,i am getting the following error,
    "External system returned different number of lines than received"
    Please help in resolving this error.
    Thanks
    Srini

    Hi,
    Can you please check this sap note..
    Note 1499319 - Ext system returned different number of lines than received
    Regards

  • No audio from laptop other than windows system sounds

    Hi 
    I have a HP Pavilion dv6 Notebook PC and the audio has stopped working. You can hear system sounds such as windows start up chime but it will not play back CD's, nothing through iTunes or Media Player. You can't hear sound from Skype or on line video's.
    Tried updating the BIOS and Audio Drivers at the HP site.
    At a loss what to try next? Please help
    Using Windows 7 BTW and Media Player 12
    Many Thanks in advance

    Have you gone to the control panel and clicked on sounds etc. Your volume may need to adjusted. right click
    on play back and there's a sound icon where you can adjust your playback sounds. (device area).

  • How can i perform system image recovery in windows 8.1 hp pavilion g6

    recently i upgrade my hp pavilion g6 to 8.1pro..i need to create an system image file of my windows 8.1..so plz give me a detailed procedure...to store it on dvds/online hp backup recovery...
                                                   Is this image recovery working properly when my system got in big trouble???

    When requesting assistance, please provide the complete model name and product number of the HP computer in question. HP/Compaq makes thousands of models of computers. Without this information it may be difficult or impossible to assist you in resolving your issue.
    The above requested information can be found on the bottom of the computer, inside the battery compartment, or on the BIOS startup/setup screen. Please do not include the serial number. Please enter the model/product information into HP's Online Consumer Support page and post it here for our review.
    Please use Windows "System Image Backup" utility to create an exact image of the Windows 8.1 partition as it currently is, on an external hard drive. You may also need to create a Windows "repair" disc. If your computer developes issues or you need to replace the hard drive, all you have to do is "restore" the image to the computer. Please see Windows 8.1 Tip: Use System Image Backup for instructions on creating and restoring a "Windows - System Image Backup."
    This process is not a system recovery and is different than using Window Restore or Refresh, or HP System Recovery.
    If you have any further questions, please don't hesitate to ask.
    Please click the white KUDOS star to show your appreciation
    Frank
    {------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
    Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
    This is a user supported forum. I am a volunteer and I don't work for HP.
    HP 15t-j100 (on loan from HP)
    HP 13 Split x2 (on loan from HP)
    HP Slate8 Pro (on loan from HP)
    HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
    HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
    HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
    HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
    HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

  • System Cache Issues with Windows Server 2008R2

    Hi,
    I'm trying to deploy Java version 1.5.0 (build 1.5.0_14-b03) on a new Windows Server 2008R2 installation. I want to use the system cache feature and have used it successfully on Windows XP workstations and Windows 2003 servers in the past. I even got it to work on a test Win Server 2008R2 server earlier this week. But on my production machine I can't get the system cache to configure.
    I installed Java as usual and it installed into the Program Files(x86) directory. I copied my deployment files to the c:\windows\sun\java\deployment directory.
    Deployment.config contains:
    deployment.system.config=file\:/c\:/windows/sun/java/deployment/deployment.properties
    Deployment.properties contains:
    deployment.user.cachedir=C\:\\Program Files\\HCN
    deployment.user.cachedir.locked
    deployment.system.cachedir=C\:\\Program Files\\HCN
    deployment.javaws.shortcut="NEVER"
    deployment.javaws.autodownload="NEVER"
    Not sure what's missing here especially since it worked fine the other day.
    Both of these servers are virtual, VMware ESX 3.5 and were created from the same template. Only real difference is the production system will be a XenApp application server so it has XenApp installed.
    Error I'm getting is that in Javaws it reports that the system cache is not configured and every time I launch my application it has to download from the source because we are deleting the local profiles when the user logs out.
    Any suggestions?
    Thanks in advance,
    Linn

    >    I just wanted to know whether there will be any sort of communication or support issues between PROD and DEVE systems with such diverse configurations.
    No.
    You could even use HP-UX on the DEV system - as long as you're able to share a common directory to ensure transporting it's not a problem. Transports are OS and DB independent.
    However, memory management and security in Windows 2008 changed significantly, you may have to use different configurations for W2K8 vs. W2K3.
    Markus

  • Notifications user system GUID rather than ID Defined in XML

    I've been working on creating, and sealing a set of management packs that anyone could import and use, and I've hit a bit of a snag. There are a number of things in the management pack that seem to be expressed using a system GUID rather than the ID defined
    in the management pack. To give an example, inside one of the management packs there is a template named  with the ID "Template_2189ec1298d647a5b971c5429e72a04e". When this template is referenced by a notification workflow, the workflow uses
    a system GUID to reference it instead. It seems as though, when a management pack is imported, the system creates all of the objects within in, so these system GUIDs are not the same and cannot be predicted. I'm having the same issue with Support Groups and
    other things as well.
    In the definition of my Notification Channel for example, one of the workflow parameters is the TemplateID the notification should use to sent the alert (Note <Item>):
    <WorkflowArrayParameter Name="TemplateIds" Type="string">
    <Item>Template_2189ec1298d647a5b971c5429e72a04e</Item>
    </WorkflowArrayParameter>
    The alert is also dependent on Support group (note the <value>):
    <Expression>
    <SimpleExpression>
    <ValueExpression>
    <Property State="Post">$Context/Property[Type='WorkItem!System.WorkItem.Incident']/TierQueue$</Property>
    </ValueExpression>
    <Operator>Equal</Operator>
    <ValueExpression>
    <Value>{cd712f91-a26b-8ff8-133d-36f9f4b40d46}</Value>
    </ValueExpression>
    </SimpleExpression>
    </Expression>
    I built my management packs, and tried to move them to a new system, they imported no problems now that I've sealed them, but when I went in and looked the template for the notification channel was blank, and since the management pack is sealed now, I can't
    change it. I thought it was odd, so I referenced my XML, and I used this to get the ID of all the templates, and I noted... now they all seem different now that I've imported them into the new system:
    foreach ($template in (Get-SCSMObjectTemplate))
    echo $template.Id
    echo $template.Name
    echo $template.Description
    I realized, when you import the management pack the first time, it must created GUIDs for all these things... is there a way to within the management pack reference the ID I can define, rather than the system GUID that's impossible to fix? I'm going to look
    into writing a script that uses smlets to correct all this information and update the MP once it's been imported the first time, but that seems like a bit of a hack, there must be a way to do this? Anyone find elegant solutions to this problem that didn't
    involve writing a fancy installer script for their management packs?

    I'll give that a try, I tried just the MP reference and the error it gave complained it expected a GUID in a particular format.
    A bunch of them are notifications that notify "affected user" or other internal references, that shouldn't need to change, the ones that go to people, or groups will have to be in an unsealed management pack. Initially, my goal was just to try
    to get as much as I could into a few management packs as possible to avoid having a large amount of management packs, more it's just looking like this isn't possible.
    I'm looking at breaking things down like this:
    Incident Customizations
    Incident Customizations Overrides
    Service Request Customizations
    Service Request Customizations Overrides
    Work Item Customizations (storing some things common to all work items, like urgency)
    Service Catalog
    Notifications
    So, my initial hope was to avoid splitting out ROs and SOs, putting any changes that need to be made quickly into the Override MPs. What this means, is that my solution can be implemented, and then customized without making changes to the core MPs directly
    in PRD, then I have a promotion process. I dislike changing things in PRD on the fly, and would prefer a solution that forced people to use a promotion process, but it's looking like with Notifications, ROs, and SOs, it's just not possible.
    Regardless of whether I'm going to seal this management pack or not, I'd like to avoid manually fixing every single Notification, or anything that references one of these internal GUIDs every time I implement this in a new system, since the possibility is
    totally there for the MP name to be used instead, I'm confused why that isn't the default behavior.

  • Creating System Restore Points in Windows Server 2012

    Searching for "Create a restore point" on Windows Server 2012, brings up a link that when clicked takes you to System Properties. Once there, there is no System Protection tab or option to create a system restore point. Windows Server Backup
    is installed and functioning.
    Is this feature available in Windows Server 2012? Was it replaced with Shadow Copies for Shared Folders?
    Thanks for any insight you can provide.

     HI,
    To create a system restore point, run msconfig.exe, that will launch a UI, click the tools tab, select system restore, that should invoke a UI which asks if you want to  restore to an earlier version or do you want to create a new restore point. I clicked
    "create a new restore point" The problem that I ran into is that when I click that button is I receive the error: can't find "C:\Windows\System32\rstrui.exe". That's the .exe which supports the "Create / restore point' processes. I
    posted a question about the missing .exe on the windows > windows 8.1 > Repair and recovery forum and was told to post it here. :>) The subject title of that post is "rstrui.exe Create a system restore point on windows server 8 Standard".
    That post documents the steps that I followed trying to create a system restore point. (FYI: I'm not trying to backup any drives. I know what a system restore point is and what backup is. They are two different animals). I want to create a restore
    point prior in order to prep for installing an App. So, If a problem occurs; the registry keys and app files can be backed out to some extent. BTW: Create system restore point on windows 8.1does work perfectly well, there's a different UI. I just didn't
    know where to post the initial problem.regards,Steve

  • System.totalMemory / unload / IE (2 questions)

    hello guys, i ve been playing with AS3 from a while and i
    noticed 2 things
    after a huge search i could find my answers, so tell me what
    do you think please.
    1/ i am trying to load images and monitor the
    System.totalMemory i noticed that even if i unload and remove the
    listner and give it 500 ms so the GC do its job but the unloaded
    images data are always there... please see the attached file u ll
    notice that the totalMemory (in the FLASH DEV ENVIROMENT) increase
    and increase and this is a small image what about if i am loading
    huge images...
    2/ talking about huge images well replace the img.jpg with
    something bigger and open your performance monitor and run the html
    page in IE notice that the memory consumed by the IE page increase
    and increase and never stop (its LIKE in the FLASH DEV
    ENVIROMENT)... but in FF or swf its ok .
    so the question here is the unload remove the data or what?
    or am i doing something wrong that make the GC never remove the
    data. And how would i manage the IE issue??
    FILE:
    Link
    Thanks

    Hi,
    I also facing the same memory problem.
    As you said in this case it works fine. But my case i am not
    loading images instead i load swf file which has sound embeded to
    the timeline as stream.
    According to this code, same memory management performs well
    for me also. but the sound in the unloaded swf is still audible and
    when i load the next swf, these all sounds mix up and i don't hear
    anything properly.
    To avoid the sound problem i added a line
    SoundMixer.stopAll() to getaway the problem, but after i added this
    line memory management got lost and my system gets hanged.
    import fl.controls.List;
    import fl.data.DataProvider;
    var tl:MovieClip = this;
    var loader:Loader = new Loader();
    var myList:List=new List();
    var dp:DataProvider=new DataProvider();
    tl.addChild(loader);
    addChild(myList);
    function loadNext(e:Event) {
    //loader.unload();
    loader.contentLoaderInfo.removeEventListener(Event.INIT,loadNext);
    tl.removeChild(loader);
    loader = null;
    loader = new Loader();
    tl.addChild(loader);
    var o=new Object();
    o.label=String(Math.floor(System.totalMemory/1024));
    dp.addItemAt(o,0);
    myList.dataProvider=dp;
    setTimeout(loadNow,100,null);
    //start loading
    function loadNow(e) {
    loader.contentLoaderInfo.addEventListener(Event.INIT,loadNext,false,0,true);
    loader.load(new URLRequest('img.jpg'));
    loadNow(null);

Maybe you are looking for