Flash to quicktime skipping frames

I'm exporting a complex flash movie to quicktime and it is skipping frames on export. The resolution is 1400 X 1020 and the frame rate is 30 fps. How can I get flash to render each frame?

oops - sorry for the double post!

Similar Messages

Quicktime movie export from Flash CS3 is skipping frame.

When I try to export Quicktime movie from Flash CS3, the
resulting mov file is skipping frames. i.e.: The movie is showing
frame number 1, 2, 3, 4, 5, 6, 7, 7, 7, 10, 11, 12, 12, 12, 15
etc...
As you can see the frame number 7 is repeated 3 times and
frame 8 and 9 are nowhere to be found.
The last configuration I used is 960x540, Sorenson video 3
medium quality, 25 fps, keyframe every 25 frames. 6400 kbits/s.
I tried various configurations,with different codecs and even
with keyframe all frames and I always get simillar problems.
Anyone have an idea what is going on, and how to fix this?
Thank you,
Olivier.

The QT exporter in Flash is honestly my least favorite
feature - not the feature itself but how it
works (or how it doesn't work in some cases). For me it is
almost unusable unless you have a very
short timeline, small stage, lower frame rate - like AS
generated effects or something - otherwise,
for true frame accuracy to video output - it is not reliable
enough and not fast enough for any real
world production environment.
So typically for me - I love SWF2Video (www.flashants.com) as
it takes any SWF and makes it into an
AVI that is frame accurate no matter what the frame rate is -
quite incredible - enough so that I
always felt it should have been bundled with Flash (as well
as Wacom tablets).
Harmony is an incredible product - as is SOLO and TBS (Toon
Boom mStudio) - each of those programs
are dedicated animation programs designed for output to video
- Flash has a lot of hats to fill and
it was never really designed for animation to video even
though many of us have found it suitable
for all intents and purposes as an animation program for full
production.
But all in all - the quicktime exporter doesn't really
deliver how we would expect it too I am sorry
to say - I only hope it works as well as it does on the Mac
(Mac users could always choose to export
to Quicktime Video but not PC users).
For now if I am exporting to video I keep it all on the
timeline or nested in Graphic symbols or use
the SWF2Video tool.
hope this helps.
-chris
Chris Georgenes / mudbubble.com / keyframer.com / Adobe
Community Expert
OBastien wrote:
> Thank you for your reply Chris.
>
> I tried different possible solutions you listed but it's
not working.
> Disabling sound had no effects. Changing the FPS is not
an option, it has to be
> 25 FPS. I lowered the resolution to 300 something, it
seemed to be a little bit
> better, but it still dropped some frame, and the image
quality was horrible.
>
> I think it is really sad that we have to try different
settings in the hope
> that flash will grab all the frames. I'm really
disapointed in Adobe. I'm
> pretty sure it is the fault of Adobe and not Apple,
because I don't have does
> problems with Quicktime in ToonBoom Harmony. What is
strange is when I do an
> AVI export I never noticed a dropped frame. I'm not
using AVI video right now
> because I can not find a codec that gives me small size,
fast encoding times,
> the ability to seek in the movie by dragging the
timeline progress bar, and the
> possibility to edit in After Effects. If you know an AVI
codec that does all
> that it would be really great news.
>
> Thank you again,
> Olivier.
>

HD 1280 x 720 , Skips Frames with Quicktime 7.*

Quicktime skips frames when I'm trying to play a video I created with my Digital camera.(Kodak Z1275) Its not the camera because it plays flawlessly on screen. I upload the file to the computer and Quicktime skips a few seconds throughout the entire file.When I uploaded the HD 1280 x 720 file to Youtube it plays flawlessly.
So the conclusion is its not my computer since the file plays perfect with Youtubes encoder.(I even brought the file to the store I purchased the camera from, the same problem) The Problem is with Quick time player!
Also when I select 1/2 speed playback speed in the Quick time player it is very smooth!Conclusion Player encoder does not like 1280 mode?
I have the latest version and even went to the trouble of purchasing Quick time Pro 7 (that I regret)
Any help from the apple gang?

The only conclusion is Quicktime is not able to process the larger 1280 x 720 format. Only the MAC boys can help! You have to get enough people complaining or find another player encoder that will work with the .mov file.
Kodak, the makers of the camera blame it on Quicktime's obsolete program. Not enough users to make it worth changing or maybe its in the works now.
Seems like Kodak got ahead of Quicktime's ****** player

IPhone movies skip frames in iPhoto

iPhone movies skip frames when imported into iPhoto

When you upgraded to Snow Leopard did you select the option to install the Quicktime 7 Player? If not the start a reinstall, select the Custom install option and install just the Quicktime 7 Player. That will let you play the movies from iPhoto (although it opens and plays outside iPhoto with Quicktime Player.

Exporting High Quality Flash to Quicktime for use in FCP4.5

I am currently working on a interactive DVD production
including various Flash animations. I've tried exporting them as
almost every possible combination of compressions I could think of
using. Every time I import any clip (although seeming smooth in
previews or as stand alone clips...in both flash and quicktime
formats), they always seem to be choppy once imported into Final
Cut Pro 4.5, DVD Studiio Pro , or Motion !!! .
If anyone could give me some advice on what would be the best
compression to use within Flash's export functions , to then be
able to use within FCP 4.5 .... it would be very appreciated ! This
is tormenting me right now !!!!
Thx

You're probably already doing this but be sure that the Flash original files are the same image size and run at the same frame rate as the video that you want to edit into. When you export from Flash as Quicktime use the Apple none compression option. This will give you the best possible file to work with. If you don't see the none compression option you can follow this set of instructions: missing "none" compression in Quicktime 7.6.6 p... | Apple Support Communities

Stuck and skipping frames

We made AIR video player using Flash CS5. But it is stuck and skipping frames when I try to play a video.
CPU usage directly goes up to 60, 70%. It gets stuck and skipping frame.
Video Format : h264 , 720p
It gets stuck and skipping frames no matter we try to play the video either by our player or by Adobe Media Player.
Most of our customers don’t have modern super computer so how can we solve this problem?
We made the test on pc with HP-Dual core CPU.
EncryptVideo.level = High
The videos which hadn’t been encrypted are stuck too.
Thanks
Dalai

Hi Dalai,
Does this happen to all of your h.264 contents? What component do you use to do the playing? Can you try to use OSMF(http://www.osmf.org/)?
Can you try to play this content with http://drmtest.adobe.com/SVP/SampleVideoPlayer_FP.html also?
Best regards,
Wang Chao

Apple TV preset : Compressing DVCPRO HD footage : Results in skipped frames

I've been super confused about the recent issue. I've got a 7 minute sequence in FCP which I'm sending to compressor. I'm compressing for my Apple TV. I use the preset, in the Apple Devices folder.
The movie compresses fine, in about 10 minutes. Final size is about 250MB, 960x540.
I have 4 spots where the movie will actually skip a frame. It's VERY detectable because these are Motion sequences with some very flowing camera movements. A skipped frame is like getting punched in the eye. This is seen on my MacPro and my Apple TV.
I have recreated this issue about 10 times, always with the same spots on the movie. I can't get rid of them. I've checked the original files, the original sequence, and there's no skipped frames. I've exported to H.264, no problem there. I've exported to iPod, and the same thing happens.
What's the commonality?... the m4v compressor.
Now, I've imported the full DVC PRO HD film, as exported from FCP, and put it in iTunes. Then I choose "convert for Apple TV." Final size is 190MB, about 60 MB smaller than the compressor version. Reason?.... Who knows what the settings are for iTunes to AppleTV?
This version plays smoothly, with no jumps or skipped frames, on my MacPro, and on my AppleTV.
What's is up? I am trying to figure out if my DVCPRO HD sequence is trying to shove too much info into an m4v sequence using the preset, and the result is that compressor just throws a frame away here and there.
This totally *****.
Message was edited by: Adam - Trigger Studios
Message was edited by: Adam - Trigger Studios
Message was edited by: Adam - Trigger Studios

To be perfectly blunt, you are best off going 960x540 since you're shooting 60i.
If you were shooting a 24p format it would make sense try to 1280x720 (since all you'd have to do is resize) but since you're attempting to retime as well (and only gaining frame judder, the choppiness that you speak of) it's not worth the time and effort. Sure you can export your FCP timeline out to a reference QT movie and drop that into Compressor - creating a PhotoJPEG movie at 1280x720 and 23.98 (making sure Frame Controls are all cranked up to Better, and output set to Progressive) but it'll take forever.
As for export to TV, I personally always use QuickTime Pro's Export to MPEG-4 feature, since I can make an h.264 encoded .mp4 file that uses Multi-Pass (being careful to adjust settings to within the TV's specs). All the AppleTV presets - even in Compressor 3 - are subpar and single-pass.
Of course, if you'd rather have a .mov file, just use Compressor to do that.

Jog Shuttle - Rewind Skips frames

I am trying to figure out how to encode in Quicktime a mpeg4 or h.264 movie with a smooth rewind (shuttle). I am coaching a sport and trying to teach with the video. After encoding, the video plays fine and actually the fast forwards goes smoothly. But the rewind skips frames . I capture from my camera in dv (avi file) with 720x480 and 29.97 f/s with about 3m bit rate. I don't care the size after I encode. When I play the avi file in QT it rewinds fine and QT goes through each frame, but when I encode to mpeg4 or h.264, the video skips on rewind. Any help would be awesome!!!
P4 - 2.4 gig 1mb ram (750 mb free) Windows XP Pro I have nothing running in the background

Sorry Kyn Drake, here's the def. of what a b-frame and bidirectional frame are....
Bidirectional Frames:
Using bidirectional prediction increases the compression efficiency and the quality of your video. A bidirectional frame is a frame created by the compressor and inserted between intraframes and/or interframes. The compressor analyzes the frames before and after the bidirectional frame and then creates and inserts a frame based on the average quality of both.
Has nothing to do with playing a video backwards...
B-Frames:
The advantages to using the B-Frames are to achieve higher quality of the video and the ability to have playback scalability. By default, the B-Frame setting is set to off. The options in the drop-down menu are: off, Auto, 1, and 2.

When I upload videos from iphone 4 to PC they skip frames. It isn't camera shake or anything like that. Any solutions?

when I upload videos from iphone 4 to PC they skip frames. It isn't camera shake or anything like that. Any solutions?

Wow that was really quick, thank you so much. Im not sure at all which version it was because i said it was around 4 years ago he bought it. I know it isn't under his username, since he's a PC person (ugh) so i know its probably registered to one of our actual names. isn't there some way to look it up since we did register it, because I'm not even sure where the disks are from when we bought it (we've moved a lot and also have two storage lockers, i know i would have kept it with other disks) but my cd rom drive is actually broken on my computer as well ( i think it got stepped on and is now squished and won't eject or run disks.)
So is there anyway they can look up that its registered to one of our names since we did register it when we bought and installed it, or do i really have to find the disk with some sort of proof of purchase (i know there would be no receipt after all this time)
either way, ill do what you suggested to the best of my abilities and thank you so much for answering my questions, i can't even open the program as its incompatible and find out the info from that) so I'm in a bit of a pickle and your response was so thorough and it didn't seem to be posted long enough to even write a well researched response, thanks, all the best,
sarucia

Flash8 or Flash CS3 determine what frames and objects use a given library object

I am doing cleanup on a FLA file(a large fla file). I am
looking for an easy way to determine where each library item
may be used in the given flash document and at what frame and
layer it may be used at.
Yes I have updated the use counts by selecting "update use
counts". Which is really nice. Becuase I can then
easily delete all the unneeded objects(note: I was also
guaranteed they(library items) were not called into the FLA file
dynamically by action script, Which was a relief).
So what I am looking for is a way to run a report for one
object or for the entire library to show me where
a given symbol, button,swf, flv or picture is being used in
the parent or it's chidren or in another library item.
Here is an example of the report I am looking for.
Library Item "logo.jpg":
ocurrence #1> _root;layer8,frame 25
ocurrence #2> _root;layer(showlogo),frame 25(imageframe)
ocurrence #3> _root;layer(showfinishpage),frame
125(exitpage)
occurence #4> LIBRARYITEM(logoTween),frame23,layer2
Does anyone know how this can be done...?
Additional search item references
==============================
report library items
Flash 8 library report
Flash MX library report
Flash CS3 librarry report
Flash Library objects usage counts
Keep use counts updated
update use counts now
determine where library items are used in a give fla file
flash library "update use counts" objects frames report
flash "library use" objects frames report
flash 8 fla library usage where are they being used

Will Edit > Find and Replace help?
I don't know of any report, other than Generate size report
(found in publish settings under Flash), but you could probably
write a .jsfl script to do it for you I imagine.

How can i customize flash player to open frames in new windows ??

how can i customize flash player to open frames in new windows ??

In case you haven't solved this, this document might help:
http://helpx.adobe.com/flash-player/kb/create-pop-browser-windows-flash.html

Flash to Quicktime

I'm in Flash 8 on a PC. I'm trying to export a quicktime
movie, but I keep getting the following error:
"An error occurred because a required Quicktime component
could not be found"
Any help would really be appreciated.
Thanks,
Dan P.

search adobe.com:
http://www.adobe.com/devnet/flash/articles/flash_to_video.html
Chris Georgenes
Animator
http://www.mudbubble.com
http://www.keyframer.com
Adobe Community Expert
*\^^/*
(OO)
<---->
dmperkins74 wrote:
> Ok, I got this to work on my Mac, but not on my PC. It
turns out that I can
> export from Flash to quicktime if I only use Flash 5
friendly graphics. ARGH.
> Does anyone know how I can export to quicktime and still
use Flash 8 blurs and
> other effects?
>
> Also, I still need to know why I can't export out to
quicktime at all from my
> PC.
>
> Any help appreciated.
> dan p.
>

Viewer in FCP 5 Skipping Frames

Hey everyone,
This is really annyoing. Everytime I try to watch something in the viewer it goes really slow/skips a lot of frames. I tried puting the playback quality on Safe RT and reduced the playback to low. That did nothing. Is there anyway to fix this so I won't have to scrub anything in the viewer?

I have the same problem, when scrubbing my footage with jkl method I notice skipped frames. My footage is DV-PAL, 3,6 Mb/s. It always worked well with FCP 4.5 and Panther. Now I've installed Tiger and FCP 5.0 (studio pack - updated) and the issue comes over. My G5 is a brand new dual 2,7, 2 Gb RAM, 2x250 Gb sata. The disks are empty, the application is on the system's one and the footage on the other. Does anybody noticed the same issue ?
What should I do ?
Thanks.

Exporting Flash to quicktime error

I am trying to export Flash to Quicktime and recieve the
following message -
"the installed version of quicktime does not support this
type of macromedia Flash movie. Quicktime requires Flash 5 or
before?"
I reset the settings to Flash 5 - but still comes up with the
error message. Does anyone know how to fix this?
Thanks Jodi

I'm having the same problem. Every website I find on the
topic simply says to change the publish settings to Flash 5 - but
it's still not working. Anyone have insight? I even uninstalled my
previous version of QuickTime and re-installed the most current
(7.4.5) - no luck.

Files seems to skip frames when importing into Premiere Elements 10

I am importing .mts files from a sdhc card. When trying to import the .MTS Files into Adobe Premiere Elements 10 it skip frames at clip transitions. When i place the files onto the timeline it looks like a 'jump' between clips, as if frames were missing. The same happens when I import .vob files from a dvd. A long seqence gets interrupted by a quick drop in audo and a quick jumpcut. How do i fix this ?

As John says, matching your project settings to your video is vital to a successful editing experience. If you've got a match, you will NOT see red lines above your clips when you add them to your timeline. Is that the case in your project?
Also, AVCHD video often requires at least a quad core or i7 processor with a good load of RAM to edit. If you don't have a powerful, well-tuned system, it could well be that the skipping you're seeing is just your computer unable to process the video data fast enought.
How fast is your processor and how much RAM do you have? What OS are you running?

Flash to quicktime skipping frames

Similar Messages

Maybe you are looking for