Flash to SIP live video - can anyone help?
We are looking for a simple solution that enables a 2-way
video call between a SIP client and a browser-based Flash client
(which grabs the webcam).
Does anyone have any ideas as to where we should look? Does
anyone want to build this for us for a fee?
Help appreciated - this is an immediate requirement so let me
know if you'd like more details around this.
I'm interested in doing something similar - bridging FMS to a
an Asterisk conference. I know breeze has this capability, does
anyone know if this can be done using FMS?
Similar Messages
-
Xbox Live issues - can anyone help
Hello - I am hoping someone can help me out with some Xbox Live connection issues that are driving me crazy. (Please bear in mind that I am a novice with these issues).
I am attempting to connect to XBox Live via the Xbox wireless adapter and the WRT54GS router. I have the router hardwired via ethernet port to a desktop computer. Here are the problems:
1. The connection is very weak and spotty, with frequent disconnects. I would say that I get a successful connection to Xbox live about half the time. The failure message seems to be different every time. At best, I get only one red bar on the Xbox Network Settings. Usually, I have to unplug and re-plug in the router to get online.
2. I tried to help the connection by buying a wireless range expander. However, when the range expander is plugged in, either I am unable to connect or it connects but I am unable to download any updates or content or marketplace runs very slowly. I assume there is some configuration problem with the expander, but I have no idea how to fix it.
3. Even when I am connected, if my wife turns on her laptop I get disconnected.
4. When I call Xbox support, they tell me it is a problem with the router. When I call Linksys they tell me it is a problem with Xbox Live.
Can anyone help? I have read a couple of posts about setting static IP addresses and opening ports, but I don't know how to do this. And would it even help?
Thank you!!!
Message Edited by MarcM on 07-11-2007 02:55 PMhi... logon to router's setup page, open I.E. and in the address bar type 192.168.1.1 it would ask for username and password, put "admin" (default password) as a password, try changing channel to 11, go to advanced wireless settings reduce beacon interval to 50, fragmentation and RTS threshold to 2304, change Transmission rate to 54Mbps, also try upgrading latest firmware on the router, go to www.linksys.com/download and download the latest firmware for the router, logon router's setup page again and click on "administration" >> firmware upgrade and try upgrading latest firmware...
click on "application & gamings" tab...and try triggering 88, 3074 ports on the router for X-Box...reduce MTU to 1365 on the router. -
We need to optimize FMS for smooth live streaming can anyone help?
So we are coming across the same problem over and over again. I called Adobe FMS tech support and they assisted us to achieve what we need, but we are having two main issues.
First, we need to allow live, clear, and smooth video broadcasting with FMS so we implemented dynamic bandwidth detection so the system can automatically detect a users specifications and adjust video accordingly. This has worked better for us but we are coming across two main issues; first, the video is now very pixilated, and second, we are still get a pause or delay in movement from the stream every 4 seconds or so.
We are looking to get similar video quality as seen on the justin.tv live broadcasting site. I know this video detection and quality is achievable, but not sure what values we need to put in or are missing?
Any help would be greatly appreciated.
Thanks,
SteveI'm interested in doing something similar - bridging FMS to a
an Asterisk conference. I know breeze has this capability, does
anyone know if this can be done using FMS? -
Flash Player not working. Can anyon help?
I am hsving difficulty in viewing videos on the Internet. Each time I'm told to download the Flash Player. I have already done this but I still cannot get any of the videos to work. I subscribe to an online art class and I cannot view any of the videos so therefore cannot participate in my classes. Can you please help me figure out why this is happening, and help resolve the problem?
Thank you.Hi Man, we can try resolve your little problem via teamviewer if you want, if don't then tell us what's wrong that you can watch youtube videos, what's happening with video window when you try view it?
-
I am having trouble downloading flash player on windows vista,can anyone help
I've tried everything installed, uninstalled, restarted, downloaded,enabled,prompt,changed adminstrator.I need help
Hi, ok that's good. Since you don't have any Anti-Virus program installed, you need to go ahead and Install the AVG, just
follow the instructions. Then be sure to Restart your computer.
Download the Uninstaller for Flash Player here and SAVE it to your Desktop:
http://kb2.adobe.com/cps/141/tn_14157.html
Download and SAVE to your Desktop the Installer for IE:
http://fpdownload.macromedia.com/get/flashplayer/current/install_flash_player_ax.exe
Download and SAVE to your Desktop the Installer for Firefox:
http://fpdownload.macromedia.com/get/flashplayer/current/install_flash_player.exe
Before you begin:
Using IE, go to Tools, Internet Options and under the Security Tab make sure it is set to Medium for the Internet Zone.
Disconnect from the Internet, check the system tray and make sure to disable any applications that use Flash. Refer to the Uninstaller instructions.
You should have an AVG icon in your system tray. Open the user interface & double click on the Resident Shield and UN tick the "option Resident Shield active", and SAVE the changes. Next find the LinkScanner, double click on it and UN tick the "Enable AVG Search-Shield" and the "Enable Active Surf-Shield" SAVE the Changes.
Don't connect back to the Internet until that step is listed.
Now Run the Uninstaller from your Desktop, when finished, Restart your computer. Then Restart again (to clear old files)
Now Run the Installer for IE and when finished, Restart your computer Once.
Then Run the Installer for FF and when finished, Restart your computer Once.
Now Re-Enable the AVG steps you took to Disable.
Now you will connect back to the Internet.
Then go here to the test site:http://www.adobe.com/software/flash/about/
You can check your websites. Post back when you are all finished.
If you have any questions before or after, just post.
Thanks,
eidnolb -
Hi all,
I can't get the Daily Show videos to play (flash) on either Safari or Firefox on either of my macbook pro & macbook air.
I have the latest version of flash, tried reinstalling, restarting, cleaning out the cache but no dice.
Can anyone help me?
Kind regards, Renegade.Works with no problem on my MacBook Air. Since it is happening on both browsers on both of your computers, have you considered the possibility that it may be something to do with your router?
-
I have a iPhone 4S and when watching videos on the internet sound cuts out as the video is playing. The rest of the video plays with no sound. Sometimes when I pause It and play again sound comes back but not all the time. can anyone help?
The "restore disk" is built into the Mac. See About Recovery.
Need more specifics about what error messages you got while installing Adobe Flash.
However, you can almost avoid Flash altogether by setting YouTube to play the HTML5 version instead.
Click the Try something new! link at the bottom of the YouTube page.
I don't know about the sound issue. Might be hardware as you think. Try other headphones to check. -
I cannot watch YOUTUBE videos on my MAC. Can anyone help me?
I cannot watch YOUTUBE videos on my MAC. Can anyone help me?
Hi ...
Most YouTube content requires the Flash plugin.
Uninstall your current copy of the plugin, then reinstall new > Troubleshoot Flash Player | Mac OS
Make sure you uninstall the old plugin first.
When you are done, if you are using Safari to access YouTube, go to your Safari menu bar click Safari > Empty Cache.
Quit then relaunch Safari. Try a video on YouTube. -
I've installed CS6 and web Premium on a Mac running 10.9.5, and Dreamweaver,Flash and Illustrator wont launch. All other components work normally. In Activity monitor it says Adobe switchboard failed to respond. Can anyone help solve this issue?
Release: 4/25/2012
http://support.amd.com/us/gpudownload/windows/Pages/radeonmob_win7-64.aspx -
updated my mac to mountain lion 10.7.8.3 and now my app store, mail or facetime won't open. Also, I am not longer able to play videos through firefox. I tried downloading the combo for mountain lion and it refuses to install saying that I need to see developer. Whenever I try to open my appstore, mail or facetime it says that the programmes need to be installed and might not be compatible with this version of mac operating system. Can anyone help me?
It's not a bad install of Mountain Lion. I've had the same thing happen to me, but it affected not only Mail, but a variety of other programs including iPhoto and MS Office, where I had to delete preferences, caches, and reinstall the OS as well as the program itself. I'm still having issues with Mail, so I've gone to another program.
Everything was fine upon the initial install. I restarted my iMac about two weeks after the install, and that's when the issues began to happen. I've reinstalled Mountain Lion twice, but the same issues arise.
As I mentioned above, you'll need to figure out which preferences are causing the issue, then reinstall the program, as a fresh reinstallation will do you no good unless you wipe the drive completely.
Here's a thread that helped me with iPhoto:
https://discussions.apple.com/thread/4794375?start=0&tstart=0 -
I am trying to open a MPEG video clip using Quicktime and it wont let me, keeps saying a codec is required. So I click on tell me more, have downloaded Quicktime 7 on numerous occasions thinking this was the problem, and it still wont let me open in. Really confused! Can anyone help???
Try VLC.
-
I need to reinstall my operating system for 10.5 after seeing a file folder and question mark flashing on my start up screen. Can anyone help me with this?
Hello,
That means it can find the Hard Drive, or can't find the things needed for booting.
See if DU even sees it.
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.) -
My iphone 4 was on ios 5.0.1, then a few days ago I upgraded it to ios 6.1.4, then the apple logo won't stop flashing. Can anyone help to resolve my problem? Thanks in advance
I'm trying to restore my iphone by using the recovery mode. But it always seems to run out of time, any idea why is that? Thank you again
-
After updating to snow leopard and trying to delete mackeeper, Flash player is being blocked and will not allow me to view utubes. Can anyone help?
Here are instructions for eradicating MacKeeper - you may need to re-install it to uninstall it fully:
http://applehelpwriter.com/2011/09/21/how-to-uninstall-mackeeper-malware/
Regarding Flash - there are many reports on here that v13.x isn't working for a lot of people. distractme in the following thread posted instructions on how to install the previous version, which should work whilst Adobe work on a fix:
https://discussions.apple.com/message/25430408#25430408 -
When I power up my Mac-Pro I only get a flashing file folder with a ? inside the folder. I suspect my hard drive is maxed to capacity can anyone help me as to what I should do?
Whatever the problem is you no longer have a bootable system. You need to try reinstalling OS X.
Reinstall Snow Leopard without erasing the drive
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install Mac OS X 10.6.8 Update Combo v1.1.
Reinstalling Lion/Mountain Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Maybe you are looking for
-
I lost it when I reinstalled Firefox, but I was already using the latest version. I think I must have installed an add-on or a plug-in, but I can;t seem to find whatever it was that I had installed.
-
Correct way to Extend JDialog?
Hello, I have a custom JDialog in which I would like to be able to be ran by the following code: AddRecordsDialog a = new AddRecordsDialog(this, data); if (a.showDialog() == AddRecordsDialog.Return_Type.Accept) //do some stuff. }I'm obvously not d
-
Hi all, We want to use an external tool for the transport management, so we want to interface our SAP ERP to this tool. For the planning of the transport, we should send our sales order with the expected delivery date to this tool, and we should send
-
**Transferring project to new computer - EMPTY FILE FOLDERS??
I had a previous post on render issues...the render was coming out very glitchy and fuzzy and like nothing I've experienced before... So what I'm doing now is taking my CS4 project and transferring to a much better computer...that has CS5 Premiere
-
I have 10.6.8. I have been searching places to download 10.7 lion. But it turns out as 10.7.5, and also says I need 10.7. Is there any way besides calling apple? I need to know.