Flash using one core with Youtube 1080p videos.

When I play a video on Youtube in 720p the activity monitor shows that the flash plugin uses about 150% of my cpu on a dual core mac mini. Now if I try to play the same video in 1080p the activity monitor shows that the flash plugin always stays at 99% and of course the video looks very choppy. This happens with both Safari and Firefox and with every single 1080p movie I have tried so far. I tried reinstalling flash but that didn't work. Any ideas?

HI,
You need to UNinstall the current Flash Player plugin BEFORE reinstalling a new copy.
Uninstall Flash
Install Flash
From the Safari Menu Bar, click Safari / Empty Cache. When you are done with that...
From the Safari Menu Bar, click Safari / Reset Safari. Select the top 5 buttons and click Reset.
Since you are running Snow Leopard, *make sure Safari is running in 32-bit mode, not 64*. Right or control click the Safari icon in the Applications folder, then click: Get Info In the Get Info window click the black disclosure triangle next to General so it faces down. Select 32 bit mode. Also, (in that same window) make sure *Safari is NOT running in Rosetta.*
Quit any open applications/programs. Launch Disk Utility. (Applications/Utilities) Select MacintoshHD in the panel on the left, select the FirstAid tab. Click: Repair Disk Permissions. When it's finished from the Menu Bar, Quit Disk Utility and restart your Mac. If you see a long list of "messages" in the permissions window, it's ok. That can be ignored. As long as you see, "Permissions Repair Complete" when it's finished... you're done. Quit Disk Utility and *restart your Mac.*
Carolyn

Similar Messages

Using one iPhone with iTunes on two PCs

Hi. Is it possible to use one iPhone with iTunes [one user account] on two PCs?
I have a desktop at home, but I'm unable to use it to update my iPhone software. I've tried several times to get to the bottom of the problem, but when I update my phone, it goes into recovery mode. As a result, I loose everything on my phone. I eventually stopped updating my phone, but now I can't get some apps to work because my iphone software are not up-to-date.
I have now authorized my PC at work in order to update my phone. It has done it successfully, but I have lost my music. Everything else is fine. Will I be able to add my music files using the PC at home?
If it works, from now on I will use my PC at work to update and back-up my phone. I know I will probably loose my music every time I do this, but it is the only way around this problem. It just means adding my music files again at home from time to time.

You can sync an iPhone with iTunes on another computer but not for any iTunes content, and you can transfer photos from a single computer only.
In regards to iTunes content, an iPhone can be synced or manually managed with music and videos with an iTunes library on a single computer ONLY. When transferring any iTunes content and photos from another computer, all iTunes content and photos transferred from a different computer will be erased from the iPhone first. If you don't have Sync Music selected under the Music tab for your iPhone sync preferences with iTunes and you don't have manually manage music and videos selected either with iTunes on another computer, you can sync away. If you transfer photos from another computer, all photos transferred from a different computer will be erased from the iPhone first.
The reason you can manually manage music and videos with iTunes on multiple computers with most iPods is because most iPods support disk mode, which the iPhone does not support. Disk mode is not supported with the iPhone, the iPod Touch, and the iPad.

What QT7 settings do I use to export a 1080p video for playback on iPhone4? I'm using the iPhone to playback 1080p video on 1080p monitor. Is this possible?

Does anyone know what settings I should use to export a 1080p video for playback on iPhone4? I'm hoping to use the iPhone4 to playback 1080p video on 1080p monitor. Is this possible?
I have previously saved my .mov file as Apple TV, but the quality is reduced from 1920x1080 to 960x540. I was unable to sync the higher quality file to my phone (and am worried this is the limitation of the hardware). I added this file to iTunes, added to a playlist, and sync'd to my iPhone. The playback works but the resolution is obviously a lower quality.Is it possible to keep the higher quality for playback through a 1920x1080 hd monitor? Otherwise, would I be able to sync a 1920x1080 mov file to a new iPad or other device? Thanks in advance to your answers.

Does anyone know what settings I should use to export a 1080p video for playback on iPhone4? I'm hoping to use the iPhone4 to playback 1080p video on 1080p monitor. Is this possible?
No. Only the iPhone 4S, iPad3, and TV3 currently support 1080p30 content. Even then the 1080p30 playback support for your monitor may depend on how the device is connected. The iPhone 4 is limited to 720p30 playback.
Is it possible to keep the higher quality for playback through a 1920x1080 hd monitor? Otherwise, would I be able to sync a 1920x1080 mov file to a new iPad or other device?
Not on your current device. As previously stated, the latest generation of iPhone, iPad, and TV devices support a maximum 1080p30 playback capability but may be limited to lower resdolutions depending on your method of connection to your monitor. This information can be found on the Apple web site TechSpecs page for each respective device.

As apple does not support Adobe flash how do I watch youtube other videos and play games?

As apple does not support Adobe flash how do I watch youtube other videos and play games?

There is a YouTube built-in app for watching those videos. If you can't find the app (it can't be deleted), then check that it's not hidden via Settings > General > Restrictions > YouTube.
For videos on other sites then you might find that some of them (probably more so if they are news sites) have their own apps in the App Store which might let you get some of the content that you want (and there is the built-in YouTube app). Also there are browsers such as Skyfire which 'work' on some sites - but judging by the reviews not all sites. If you want to play flash games then you are probably out of luck if you want to play on-line though the iSwifter app might work on some of them, but again some flash games have app versions in the store.

Any way to use 80GB Classic with a "Portable" video device

I have asked questions about this topic in other threads over the past month, but I am going to revive it here. I am leaving on a trip shortly, and I'm trying to receive a definitive answer whether there is any conceivable way to use my 80 GB iPod Classic with a portable video player. Some of the most frequently ones mentioned are the Motorola iFlip, the Philips 750, Sonics V55....I have read confusing reports of people going backwards to firmware 1.0.2 to use the TV out feature to get them to play on a TV...with Apple cables..., but I still have been unable to decipher whether anyone anywhere has successfully been able to use an iPod Classic with any type of "Portable" video device. I am not opposed to paying for appropriate cables or even an Apple produced device, but I don't believe one exists. Any help or info would be greatly appreciated.

Which probably refers to the iPod 5th generation (commonly called the iPod Video). Do Philips specifically advertise this as compatible with the iPod Classic?
Yes, you are correct, it probably does refer to the Ipod 5th generation of Ipods; however, that's not stated on any packaging for the Philips product. It simply says: "Docking Entertainment System DVD Portable with dock for iPod" and later in the instruction manual it says: You can dock your iPod player for playback of stored files and recharging. Only 30G, 60G and 80G iPod players with video are supported." So my point is that how would anyone know that Philips is refering to the 5th generation Ipods until after the product was purchased and used? My answer: He or she would not know...could not know based solely on the packaging and instructions...and in some cases until a knowledgeable Philips customer service person provided the correct answer. This miscommunication could have been avoided completely if only Philips had incorporated "5th generation Ipods" in it's promotional and instruction language. Even after the units were shipped, a simple disclaimer could have been sent to retail stores that carried the product and placed in (or on) the packaging. Furthermore, Philips could alter the manual on its own Web site to provide a clarification. So far, none of these tasks has occurred.
I'm curious as to why you think it's Apple's responsibility to ensure the new iPods work with this Philips product.
I not never said who is responsible. Neither company wants to accept responsibility. It appears, however, that Apple altered its firmware and/or software that renders many products (including the Philips DCP 750/37)incompatible with the Ipod Classic. All I want is to use my Ipod Classic with a third party product. I don't care where the fix comes from that allows this to happen.

Using one counter with FiniteSamps and another with ContSamps

I am trying to use 2 counters on the USB-6229 (or USB-6259), where one counter is set up for FiniteSamps and another for ContSamps. I have the following MeasurementStudio code:
ErrChk DAQmxCreateCOPulseChanTicks(hCnt0, "Dev1/ctr0", "", "20MHzTimebase", DAQmx_Val_Low, 0, 400, 400);
ErrChk DAQmxCfgImplicitTiming(hCnt0, DAQmx_Val_FiniteSamps, 100);
ErrChk DAQmxStartTask(hCnt0);
ErrChk DAQmxCreateCOPulseChanTicks(hCnt1, "Dev1/ctr1", "", "20MHzTimebase", DAQmx_Val_Low, 0, 400, 400);
ErrChk DAQmxCfgImplicitTiming(hCnt1, DAQmx_Val_ContSamps, 2);
ErrChk DAQmxStartTask(hCnt1);
When I run it, I get a run-error 50103 "The specified resource is reserved". If I change the FiniteSamps to ContSamps on the first counter, everything works fine.
If I use only one counter with FiniteSamps, everything also works fine.
Is this a bug in DAQmx or the dual counter use on M-series devices is limited to ContSamps?
Vic
Solved!
Go to Solution.

Hi Vic,
This is actually expected on an M Series device. Here's a timing diagram from the M Series User Manual that might make this a bit more clear:
The device actually uses one counter to gate the other so the result is a finite pulse generation. If you can provide the gate from another source, you may configure a continuous pulse generation on both counters and gate them (DAQmx calls this a "Pause Trigger") from this external signal.
You might also want to look into using Correlated Digital I/O to generate multiple finite pulses (up to 32 lines on your 6229 and 6259). You could use one of the counters to generate a timebase for the digital lines, and build the waveform accordingly.
One thing to note is that our new X Series boards can generate a finite pulse generation on a "single" counter (there is actually a paired internal counter that allows for this). There are four user-accessible counters on X Series devices, meaning you could generate four finite pulse trains.
Best Regards,
John
John Passiak

Quicktime X only uses one core on a C2D

On my mac mini C2D activity monitor shows that quicktime X refuses to use more then one core which makes hd movies look very laggy and bad. What can I do to make it use both cores?

QuickTime itself limits to a single processor/core in most cases.
Worst is that quicktime is slow to render movies.
I hope Apple will rewrite quicktime so it supports Open CL and Grand Central Dispatch.
Kind Regards
Henrik

T61 only using one core under Windows XP?

Hi,
I have a T61 that came preinstalled with Vista but we reinstalled XP Pro SP 3 on it since we need to work with software which doesn't work with Vista.
When looking in Windows Task Manager, it only shows me one core. I don't know whether the Vista Task Manager did this too (never had a chance to see it before it was reinstalled). Also CPU-Z can only identify one core, even though it correctly identifies the CPU as being a Merom T7300 CPU.
Could it be some power-saving option somewhere that is keeping the second core deactivated? Note that I don't have the Thinkpad softwares installed, since they didn't provide any functionality that worked better than Windows XP itself.

I have somewhere seen a setting to disable the second core as a power saving feature, but for the life of me I can't remember where, and I don't have my T61 on me to look at right now. I'm thinking it was part of the thinkvantage power settings program, but I could be wrong.
T61 15.4" T9300 (2.5GHz 6MB L2) Windows 7 Professional x64 4GB Memory, NVidia Quadro NVS 140M

How to use one monitor with two Power Macs

I searched this forum and was unable to find an answer. Although I believe it's probably here.
Nevertheless, I have a Power Mac G5 and a rarely used Power Mac G3. I'd like to share the G5's VGA Accusync 120 CRT monitor with the G3. I know there is a way to switch the monitor between computers without pulling plugs in and out of the machines.
Does anyone have any specific switch I could buy to solve this issue. I don't care so much for picture quality for the G3. But I don't want to compromise picture quality for the G5.

You're looking for what's called a KVM (Keyboard, Video, Mouse) switch.
This one should do what you're looking for. I've not used it, but it does VGA switching like you want and is inexpensive.

Flash no longer works with YouTube

I updated Flash, Firefox, and Windows 7 on 12/10/14. Since that time I am no longer able to use Flash on YouTube. I get a black player and the message: "An error has occurred. Try again later." I'm using Firefox version 34.0.5 and Flash version 16.0.0.235. If I disable Flash the HTML5 player works. This is a real pain because I'd rather use the Flash player and several other sites I visit require Flash. Anyone have any suggestions on how to fix this? I don't know if the problem is with Flash, YouTube, or Windows. Any help would be appreciated.

Please ask your question on a forum for the Flash Player

Problems using FW-7344 with Fire Wire Video Cameras

Is it a bad idea to use the FW-7344 with other devices on the same fire wire bus?
We are trying to use an FW-7344 with a fire wire video camera but we tend to get packet errors that force a reset of the controller. We suspect that the problem is related with the camera and controller being on the same fire wire bus.
We instantly see problems when we connect two FW7344s and one video camera on the same fire wire card.

The NIMax program reads Packet Error. I can't recall the first error that our program reads, but I think it typically says something about not being able to communicate return values from the controller to the host computer.
This makes me think that the NI driver on the host does not retry after failing to get return data from the controller. This assumption may be valid with the PCI version, but probably is not with the FireWire version.
It only takes one camera for this problem to happen, but the problem is intermittent.

Oracle BPEL running on multi-processor/multi-core using one core

Hi,
At a site we have running Oracle BPEL on OAS (10.1.2), AIX 5.3 LPAR with 10 cores (5 processors). Shortly we have an noticable load on the system, which revealed that Oracle BPEL seems to be bound to one processor. Therefore the other processors are hardly used. Can this be solved by re-configuring OAS or Oracle BPEL to use multiple processors for separate threads or Is this an Oracle Application Server or Oracle BPEL limititation and should we install multiple OC4J's to make effective use of the processors.
Cheers,
Peter

Oracle® Process Manager and Notification Server Administrator's Guide
10g Release 2 (10.1.2)
B13996-02
5.2 OC4J Minimum Configuration
The following lines represent the minimum configuration for OC4J. Default values are assigned to all other configuration elements and attributes for OC4J.
<ias-component id="OC4J">
<process-type id="home" module-id="OC4J">
<port id="ajp" range="3301-3400" />
<port id="rmi" range="3101-3200" />
<port id="jms" range="3201-3300" />
<process-set id="default-island" numprocs="1"/>
</process-type>
</ias-component>
Oracle® Application Server Release Notes
10g Release 3 (10.1.3.2) for Microsoft Windows
Part Number B32199-03
4.1.1 Limited Management Support for Multiple-JVM OC4J Instances
With Oracle Application Server 10g Release 3 (10.1.3.2), you can configure any OC4J instance to use multiple Java Virtual Machines (JVMs). You can perform this configuration change by using the Application Server Control Console or by setting the numprocs argument in the opmn.xml file to a number greater than one (1).
The opmn.xml file is located in the following directory in your Oracle Application Server Oracle home:
ORACLE_HOME\opmn\conf\
To set the number JVMs in the Application Server Control Console, see "Creating Additional JVMs for an OC4J Instance" in the Application Server Control online help.
To set the number of JVMs by editing the numprocs argument in the opmn.xml file, refer to the following example, which shows the numprocs entry you must modify:
<ias-component id="OC4J"> <process-type id="home" module-id="OC4J" status="enabled">
<process-set id="default_group" numprocs="2"/>
</process-type>
</ias-component>
Note, however, that this feature is not supported by Application Server Control. Specifically, Application Server Control (represented by the ascontrol application) cannot run on an OC4J instance that is running multiple JVMs. As a result, be sure that you do not configure multiple JVMs for the administration OC4J instance (the OC4J instance that is hosting the active ascontrol).If you choose to configure the number of JVMs for the administration OC4J to more than one (1), then you must use command line tools to manage your Oracle Application Server environment. For example, you must use:
admin_client.jar for deployment, re-deployment, undeployment, start and stop applications, and shared library management
Apache Ant for deployment, redeployment, and undeployment of your applications
opmnctl commands for starting, stopping, and other life cycle operations on the Oracle Application Server
Further, if you are using multiple JVMs on the administration OC4J and, as a result, the Application Server Control Console is not available, then you must make any Oracle Application Server instance configuration changes manually. Manual configuration changes often require you to shut down the Oracle Application Server instance, manually configure the relevant XML files, and then restart Oracle Application Server.

Is it possible for two people to use one iMac with iPhone and iPad separate iTunes and iCloud acc?

Apologies if this is a very obvious question. I have one iMac that my husband and I use, he has an iPhone that he syncs with the iMac via iTunes for app such as docs to go. I recently purchased an iPad, I want to also sync with the iMac. Is it possible to use two iTunes and two iCloud acc to one iMac? We would like to pick and choose what we sync as we keep separate docs etc on the iMac, can this be done?

Yes. Just set up your own account in System Preferences > Accounts (User &groups in Mountain Lion). You'll have your own seperate everything including mail.

Using one iPad with multiple iTunes accounts

I am trying to understand the iTunes implementation on iPad..After synching my MBP on an iPad, all of my settings music, photos,mail are transferred to the iPad...my wife now wants to use the iPad as we are traveling...can my iPad's iTunes be signed off and her iTunes account be logged on thus she can access all her data stored on her iTunes account? I have spent a lot of time investigating this on the forum and I do not understand what can and not can be done...If this can not be done, then if any iBooks we want read (different books for me/wife) then needs to be purchased and read on the one iPad needs to be bought on only MY account which is synched to my MBP... ? It seems that you need one iPad for each user...(we each have our own MBP)?

The iPad is not set up to allow different users with different data.
All users have the same data.
iTunes account = iTunes store account to make purchases
iTunes library = everything in iTunes when she logs in with her computer login
wife now wants to use the iPad as we are traveling...can my iPad's iTunes be signed off and her iTunes account be logged on thus she can access all her data stored on her iTunes account?
If you mean she want to sync the ipad with her iTunes library, yes.
She will need to login to her computer account, connect the iPad, launch iTunes then sync it.
This will erase all your data on the iPad and sync all her data.
If you mean can she access iTunes store account, launch iTunes on the iPad, scroll to the bottom and tap Sign out iTunes then sign back in with her iTunes account.
This will not add anything of hers to the iPad but she can make purchases with her iTunes account.

How to use one PSE with multiple URLs?

I need to hit my DMZ SAP Web Dispatcher with multiple unique URLs. I am starting off using webdisp1.abc.com and webdisp2.vde.com. DNS will resolve both the Web Dispatcher Host. Following Tobias Winterhalter's Blog: Name-based virtual hosts and one SAP Web Dispatcher to access multiple SAP systems.
My question is how do I go about generating the pse so I can store both webdisp1.abc.com and webdisp2.vde.com? Do I just import the first request and initiate another certificate request using the same pse?
Example
sapgenpse gen_pse -s 2048 -p D:\<file path>\SAPSSLS.pse -r D:\<file path>\webdisp1.req CN=webdisp1.abc.com, OU=IT, O=XYZ Inc., C=US
Cheers,
Dan Mead

Hi Daniel,
what you are looking for are so called SAN certificates. As Martin said, with sapgenpse you are pretty out of luck. However you can create the certificates using openssl and then use sapgenpse to import them into a pse. There are a number of guides on how to create SAN certificates on the web, like the one mentioned by Martin from CAcert (which is one of the best imho) or this one. And there are also guides on the internet on how to convert OpenSSL keys to PSE.
You should however keep in mind, that SAN certificates are more expensive than standard certificates. Therefor they only pay if the hostnames in there are stable for the lifetime of the certificate. If the hostnames need to change once a year, you already will be better off (from a cost perspective) by creating one pse per hostname an let the webdispatcher listen to different addresses, as each hostname requires a new certificate signed by the CA.
Please also make sure, the systems and browsers connecting to your webservers are able to understand SAN certificates. For SAP systems this requires at least pl24 of the sapcryptolib.
Kind regards,
Patrick

Flash using one core with Youtube 1080p videos.

Similar Messages

Maybe you are looking for