Flash Video and Snow Leopard

After being able to watch live streaming flash video with Leopard these same live streams no longer work with Snow Leopard
http://www.hancockwildlife.org/index.php?topic=cam-sites
Is there a fix ? Do have Adobe Flashplayer 10 installed as well and it still no luck.

They're working for me with Snow Leopard, so it's not a problem that affects every SL user, at any rate.
What web browser are you using? Are you able to successfully get Flash to work on Adobe's test page?
http://www.adobe.com/software/flash/about/

Similar Messages

Flash CS4 and Snow Leopard

Hello there,
Flash CS4 was working perfectly for me for a couple of months (Master Collection), upgraded to Snow Leopard yesterday and bam Flash crashes every time I open a .fla file.. SWFs open and operate fine.... but as soon as I create a new file or open a previous fla it bombs out! I reinstalled flash, didn't work... reinstalled the entire master collection, didn't work... tried installing my old version of flash CS3 and THAT won't even open up now without crashing.. I'm currently installing flash on an older machine I have but this is REALLY starting to annoy me as I use flash the most out of all the applications.
What is the point of buying a Mac Pro if I have to use an old machine to use Flash ?
Please help!
Many Thanks

Ok, after 6 and a half hours of fun I have discovered that the reason for this is due to fonts problems, I had removed my fonts from font agent pro although not from font book..
To see if this problems is what you are having:-
1) Boot up your mac in safe mode (hold down shift immediately after you hear the startup chime) This disbles all fonts
2) Open flash and your problem file (files) or any (fla) file really to check it doesn't crash
3) If flash opens successfully and the file opens showing a missing font dialogue box, you have the same problem..
4) If this is the case reboot..
5) Remove all of your own fonts from your font application (Suitcase/Font Agent Pro)
6) Remove all non system (user) fonts from Font Book (make sure to back up your fonts first as this erase them of the system)
7) Delete the flash preferences (com.adobe.flash-10.0.plist) file located in (user)/Library/Preferences
8) Relaunch flash
With a bit of luck... problem solved !
I hope this saves some other poor soul who had been looking forward to updating their website whilst off work to not waste 6+ hours sorting it out..

Flash CS3 and Snow Leopard

Hi, i am experiencing a strange and unpleasant situation.
I am using CS3 and upgraded to Snow Leopard 10.6.2 last night, along downloading the latest Flash Player for browsers.
Problem is that now all of my text block arent displaying the same line height that before i updated?????
I compared the same exact SWF made under Tiger and those made under Snow Leopard and the two arent identical, lines are misaligned regarding line height!
What gives? Flash or OSX interpreting fonts differently?
Thanks!

I dont know whats up with this... but all of a sudden today, in my flash cs4 (mac and PC versions) When i go to open a fla in flash to work on it, i select a text box... in the properties window under position and size --- HIEGHT-(selection hieght) value is grayed out... I opened fla's that i had don before but this also now affects them as well. I tried opening on my PC .. now it does the same thing. Every file i open now.. when i got to the properties of a text box ... the height values are grayed out. I am using Palatino roman font... in a simple text box.
Position and size:
x:20 y:15
w:264 H:335.2 <-------- grayed out!!!
I have opened these files in cs3... and that now is also experiencing this......
PLEASE HELP... Im in the middle of a project --- with extreme deadlines...
PLEASE PLEASE PLEASE
my post....
saw yours.. wondering if this is related.. Im running Snow Leopard now to.. just started. Then the Height variable became grayed out. In your properties windows, are you experiencing the same??
It's killing me...Im an animator that does books... I am unable to adjust this value, and when i sent the fla to someone else... they say they see everything fine, but when i view it.. the Text spacing in multiline text box is different than discribed back to me... My line height is much larger than what he is seeing.
Please let me know if you find anything.
Regards
Phantom Lady

Flash Player and Snow Leopard

Have 10.6.1 installed. Websites w/video (i.e. YouTube , ESPN) freeze up my browsers (FireFox and Safari). Hearing that it may have something to do with the internet plug-ins, specifically the flash player. All worked when 10.6.1 was first installed.
Help, thanks

Should not need to do again. It was only that doing an upgrade install left fonts and conflicts behind.
I tend to disable or manually empty Safari metadata cache, it gets large and doesn't have a quota system or size limit. And after a point instead of help, it just causes more disk I/O.
The problem with plug-ins is not just a 64-bit or lack of issue, it is growing pains, baby steps into 64-bit world. It doesn't happen with Windows 7 x64 at all, even with dozen youtube, itunes, and more thrown at it.
The cpu is designed to see requests, trouble is it turns into "cat chasing its own tail" as memory is moved to/from disk to memory, from there to cache, to the proper task and core, and actually "thrashes" - core thrashing. Need to see more optimization of code for new multi-core systems, especially 2009 models with their hyper-threading.

Is it possible to install Lion on the second hard disk on my Mini (2010) Snow Leopard Server, and switch between Lion and Snow Leopard? I like those voices Lion has in speech.

Is it possible to install Lion on the second hard disk on my Mini (2010) Snow Leopard Server, and switch between Lion and Snow Leopard? I like those voices Lion has in speech.

When baltwosaid NO emphatically, that was described as CORRECT ANSWER. Ditto in the caeses of the radically different answers from Camelotand Matt Clifton
Could it be that CORRECT ANSWER needs better defining by Apple?
That apart, yes, switching might involve rebooting. About the voices, well, I was the other day adding voice to a commentary in a video I was working on. There's only American English accent in SL — Lion I believe has British ones as well.
Why not, I wondered, try to install Lion purely for academic interest, maybe with an SD card (Sandisk Ultra II, 16GB) as Tom Nelson says is possible at http://macs.about.com/od/macoperatingsystems/ss/Perform-A-Clean-Install-Of-Os-X- Lion-On-Your-Mac.htm

Aperture 2 and 3 and Snow Leopard

My system with Aperture 2 was perfect.
Then I believe that Snow Leopard killed Aperture 2.
When I first installed Snow Leopard my machine felt like new again but slowly and slowly over the last few months the whole system seems to feel less and less snappy.
I don't use many video-intensive applications - my main one is Aperture 2, so this is where I find my main cause for concern.
Painfully slow adjustments with lagging, beach-balling, CPU-hogging, and RAM theft.
The main culprits seem to be Highlights/Shadows, Straighten, Crop, and Retouching… although my open mind says that could simply be because they form the latter part of my tweaking process.
There seems to be a thumbnail generation issue. Every adjustment that is made generates a new thumbnail - as you work through your tweaks that process seems to get backed up and slow everything down.
There seems to also be a video issue. Tweaking horizontal photos in full screen causes twice as much lag as a vertical image. Why? Take a look - it's obvious - in full screen edit a vertical image is about half the size of a horizontal one.
There seems to be a memory issue. Aperture seems to use a large amount of processor and RAM and sometimes doesn't let go of it or it gets caught in some kind of a loop. I've no idea what I'm talking about here. All I know is when I look at Activity Monitor the numbers are going through the roof and I can barely concentrate on them because of the noise from my fans.
There have been various and quite diverse suggestions on this and other forums as to what the underlying problem is and I have done my best to look into those and see what can help.
I have an early-2008 MBP 4,1 - 2.6 Intel Core 2 Duo - 4GB (factory-fitted) RAM - GeForce 8600M (512MB) GT.
I have done everything possible: all software totally up-to-date, re-installed combo updates, rebuilt Aperture libraries, run consistency checks, fresh Aperture install, fresh Snow Leopard install, repaired permissions, booted in 32bit, booted in 64bit, run hardware tests, deleted plists, cleared caches, downloaded and run applications like Onyx and Snow Leopard Cache Cleaner (amongst others) to ensure everything is in ship-shape along with various test applications to gauge if components like my hard drive are dying.
I keep my system clean and tidy. I have now stripped out bloat. I even took out iPhoto in case its 'iLife' browser link to Aperture was an issue. I have 85GB free on a 200GB. All components are original as factory-fitted by Apple.
Everything that any seemingly intelligent person on any decent forum has suggested has been done - in particular I thank the many users here on the Apple forum for all their information sharing… I try to read them all.
From what I see on the forums, I am not alone.
Nothing has fixed this problem.
I (and no doubt many others) have fed this information back to Apple.
Aperture 2 and/or Snow Leopard has a problem that has not been fixed.
Aperture 3 got released and I trialled it and swiftly uninstalled it because the exact same problems are there - even with one single photo in it.
My concern is that Apple will not fix the cause of the problem which seems to lie outside of Aperture.
If Apple concentrate on making Aperture 3 work better inside a possibly shaky Snow Leopard then I will be very disappointed.
I'm not forking out for a new version of software just because Apple broke my current software. Don't get me wrong - I do actually WANT to buy Aperture 3 because it has functional improvements and advancements that I would love to be using providing it works properly - and for me (and it appears for 'quite a few' others as well) it just simply doesn't… and neither does Aperture 2 any more.
I am no technical expert (as you've probably noted already) but a MAJOR bug seems to lie in the relationship between Snow Leopard, graphics cards, and the way it handles memory - and so in turn graphically-intensive applications like Aperture are high-lighting these problems more than others.
I am sure there are people without these problems. Perhaps these problems relate to specific hardware configurations. My configuration is Apple standard. I really shouldn't have these problems.
Until Apple fix this major bug I cannot remotely consider Aperture 3.
Until Apple fix this major bug I could never buy Apple again.
Up until Snow Leopard you had a VERY happy camper. I had a perfect machine and I was shouting Mac from the rooftops to anyone that would listen.
And then it seems Snow Leopard broke my machine.
What a shame.
I really want to use Apple, I actually really like Snow Leopard, I really want to use Aperture, I really want to carry on telling people how wonderful the Apple Mac experience is (or was...) but Apple are currently making it very difficult for me to continue doing so.
Please fix Snow Leopard.
This will hopefully fix Aperture 2 and Aperture 3.
Unless anyone else has a fix?
Sincere apologies to all for banging on for so long !!

Thanks for your input setwart.
When I make adjustments I do want Aperture to provide me with a new version so that I can see the original image and also that I have a version which I have already adjusted. I've previously tried changing that preference before with no improvement in performance unfortunately, but it's not really what I was referring to.
Versions, thumbnails and previews were very confusing terms to me for a while… actually, in some ways, they still are but my understanding is 'a little' better now.
That said, I probably used the wrong term.
What I meant was that every time you make an adjustment Aperture seems to produce a 'record' or 'snap-shot' of your image including that latest adjustment. In so doing you have an entire history of each adjustment you have made. In my head I picture this like a movie film-strip with each frame differing slightly. You increase your saturation by a single point? Another snap-shot. Fancy another single point on your saturation? Another snap-shot… and so on.
It is typical that I will make a bare minimum of 20 adjustments on each image, and that's before even thinking about straightening, cropping, and retouching… and then maybe I'll go back and tweak everything again !!
Somehow, my system is having difficulty in keeping up to speed with all of those snap-shots of individual adjustments. Certain adjustments will drastically slow things down more than others, and then I get to play with the beach-balls.
But - it used to handle these things just fine and that's what I'm trying to get back to.
Thanks again for getting involved.

We have an older apple computer with safari version 5.1.10 and snow leopard version 10.6.8 do you have something compatable?

Does adobe make a version for a older apple computer, with a safari version 5.1.10 and snow leopard 10.6.8 .

Flash Player is still supported on that os/browser combination (see Adobe Flash Player | Tech specs). You can download the latest version from http://get.adobe.com/flashplayer.
Maria

Can I have both Lion and Snow Leopard on One Hard Drive?

My problem is I need to run a PowerPC game on Lion which Lion no longer supports. So i thought i could download Snow Leopard back to my Mac and partiition my hard drive in the process as that is the only way i know of to have both Lion and Snow Leopard. I went through the Boot Camp Asistant process and it seems it will only partition Windows 7 to my Mac when i need Snow Leopard. If anyone has any idea how to help me have both Lion and Snow Leopard at the same time on just one hard drive or figure out how to run the PowerPC programs on my Mac (if there is a way around it). The help will be well appreciated!

How To Run Snow Leopard On A New Mac
This does not apply to new Mac Minis or MacBook Airs. When newer models are introduced that also require Lion for hardware support, the techniques described below will no longer work with the possible exception of using Parallels 7.
What has to be done:
Create a new partition on the hard drive.
Get a clone of a 10.6.8 Snow Leopard system. Put the cloned Snow Leopard system onto the new partition.
Step One: Create a new partition on the hard drive
To resize the drive and create a new partition do the following:
1.    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
       After the main menu appears select Disk Utility and click on the Continue button. Select the hard drive's main entry then click on the Partition tab in the DU main window.
2.   You should see the graphical sizing window showing the existing partitions. A portion may appear as a blue rectangle representing the used space on a partition.
3.    In the lower right corner of the sizing rectangle for each partition is a resizing gadget. Select it with the mouse and move the bottom of the rectangle upwards until you have reduced the existing partition enough to create the desired new volume's size. The space below the resized partition will appear gray. Click on the Apply button and wait until the process has completed. (Note: You can only make a partition smaller in order to create new free space.)
4.   Click on the [+] button below the sizing window to add a new partition in the gray space you freed up. Give the new volume a name, if you wish, then click on the Apply button. Wait until the process has completed.
You should now have a new volume on the drive.
It would be wise to have a backup of your current system as resizing is not necessarily free of risk for data loss. Your drive must have sufficient contiguous free space for this process to work.
Step Two: Obtain a clone of a Snow Leopard system:
You will need access to a Mac already running Snow Leopard. You will need a 16 GB USB flash drive or an external hard drive to which you can clone the Snow Leopard system from the Mac that has Snow Leopard installed. Alternatives are:
Option One:
Install a new Snow Leopard system onto a USB flash drive. Boot the Mac used for installing with the USB flash drive. Update the flash drive system to 10.6.8 using the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard. Verify that you can boot the Mac with the USB flash drive.
Take the USB flash drive to your new Mac and try booting from it. If it works then clone the system from the flash drive to the newly made partition:
          Clone using Restore Option of Disk Utility
Open Disk Utility from the Utilities folder.
Select the destination volume from the left side list.
Click on the Restore tab in the DU main window.
Check the box labeled Erase destination.
Select the destination volume from the left side list and drag it to the Destination entry field.
Select the source volume from the left side list and drag it to the Source entry field.
Double-check you got it right, then click on the Restore button.
          Destination means the new partition on the internal drive. Source means the USB flash drive.
Option Two:
If you have a large enough external drive you can erase and use, then it would be easier to just clone the entire Snow Leopard system from the source Mac computer to the external drive.
          Clone using Restore Option of Disk Utility
Open Disk Utility from the Utilities folder.
Select the destination volume from the left side list.
Click on the Restore tab in the DU main window.
Check the box labeled Erase destination.
Select the destination volume from the left side list and drag it to the Destination entry field.
Select the source volume from the left side list and drag it to the Source entry field.
Double-check you got it right, then click on the Restore button.
          Destination means the external drive. Source means the Snow Leopard Mac's internal drive.
After cloning verify that it will boot the source Mac. If so then take the external drive to your new Mac boot with it. If all is well then restore the clone to the new partition on your new Mac:
          Restore the clone using Disk Utility
Open Disk Utility from the Utilities folder.
Select the destination volume from the left side list.
Click on the Restore tab in the DU main window.
Check the box labeled Erase destination.
Select the destination volume from the left side list and drag it to the Destination entry field.
Select the source volume from the left side list and drag it to the Source entry field.
Double-check you got it right, then click on the Restore button.
          Destination means the new partition on the internal drive. Source means the external drive.
If the above seems too daunting then you might consider running Snow Leopard inside an emulator such as Parallels 7. You are permitted to install a single copy of Snow Leopard inside a virtual machine. You will need to first purchase a copy of Parallels 7 and install it on your new Mac. Create a new virtual machine configured for Mac OS X. You may then install Snow Leopard in the virtual machine then download Mac OS X 10.6.8 Update Combo v1.1 and update to 10.6.8. Be sure to include Rosetta in your initial Snow Leopard installation. Rosetta is not installed by default rather it's an optional install.

AVCHD and Snow Leopard (I-Movie / Final Cut Express)

AVCHD and Snow Leopard. I have been using Final Cut Express 4 and I-Movie 08 since they both came out. I have been using the same AVCHD camcorder (Cannon HG10) with both programs, and it has worked perfectly. Now I have installed 10.6 and 10.6.1 and now neither program will allow AVCHD transfer. Both recognize the camcorder but won't transfer.
A little poking around on the internet and I discovered that Snow Leopard won't support AVCHD (http://www.shedworx.com/no-avchd-in-snow-leopard). Third party web site mind you.
So far I agree it won’t work with AVCHD. Now since both programs were developed to use one of the most widely utilized formats in HD camcorders, again AVCHD, this accidental or intentional over site smells of Microsoft, not Apple.
I like some of the features of Snow Leopard but for me the video aspect is one of the top requirements. Apple had been the leader in the multimedia revolution and this mis-step with AVCHD is it’s typical of Apple.
I have just restored back to 10.5 and every thing is working again.
Now that were around the block here is the question. If anyone can come up with a solution…that does not include the used of third party software to convert, please let me know.
And to Apple, please fix this problem, I’m already hearing the complaints with QuickTime X, and seen the headlines, “Snow Leopard, is it Apples Vista?”.

CAM2399 wrote:
A little poking around on the internet and I discovered that Snow Leopard won't support AVCHD (http://www.shedworx.com/no-avchd-in-snow-leopard). Third party web site mind you.
This is, to be polite, a misunderstanding. Shedworx are being careless with their terminology.
1. SL itself does not support AVCHD, but neither did Leopard.
2. AVCHD support is built in to the movie editing software (iMOvie, FCE, FCP), exactly as it was in 10.5
3. I am happily editing AVCHD from my HG10 in iMovie 09 and in FCP, in exactly the same way I did under 10.5
So you have a specific issue with your camera, you've taken that with some carelessness from Shedworx, and on that basis you've decided, incorrectly, that Apple does not/will not support AVCHD.
There were many cases under Leo where people reported problems getting their camera to communicate with iMovie. Solutions include:
1. Trashing iMovie preference files
2. Repairing permissions
3. Copying the AVCHD folder tree from the camera to disk, and importing to iMovie from there
4. Using MPEG Streamclip to convert the camera footage before importing to iMovie
5.Making sure the camera is running on mains power, not battery, and that it's in playback mode.

In limbo between Leopard and Snow Leopard - stupidly didn't back up

I've got an old-school black MacBook, about four years old now. I never cared enough to upgrade it to Snow Leopard, but now I want Lion. So, I borrowed my parents' five-license Snow Leopard install disc and started off on the journey to upgrade to Snow Leopard, download the App Store update, then download and install Lion. I didn't get far.
First, let me say that I didn't back up my hard drive. Like an idiot. Yes, I know it was stupid, so there's no need to say anything. My previous installs (a few clean re-installs) have gone without a hitch, so I figured I'd trust Apple and just run the installation without backing up. Dumb.
The Snow Leopard installation started fine, but was interrupted when the installer said the install failed. Restart, try again. Booting from the install DVD, things seemed to be going fine a second time around -- picked my language, got to the install set-up screen, picked Macintosh HD as my installation drive. And then things stopped working. The installer said my HD could not be written to and that it needed repair. So I went to Disk Utility to try that. Repair Disk wasn't available, so I clicked Verify Disk. That got interrupted when it said the disk needed to be repaired, after which the Repair Disk button was clickable. Tried to repair, but apparently my HD is screwed beyond the capabilities of Disk Utility.
I tried to reboot the MacBook from the HD, which Disk Utility said still had Leopard running on it. The computer wouldn't boot up. Safe Boot didn't work. So, without any other real options, I thought I'd try my luck by just trying the install again. Booted up from the install DVD, and ran into the same issues. Didn't magically fix itself, of course. So my MacBook is stuck in limbo between Leopard and Snow Leopard, won't boot from the HD and won't let me repair the disk when booted from the DVD. What do I do?
I plan to try a couple third-party disk-utility programs tomorrow (8/25/11) to recover the files on my HD. There's not much I care about on there (just some iPhone photos and my resume, really), so doing a clean wipe of the HD and installing Snow Leopard is an option. But I'd of course rather be able to recover my personal files. Is this possible at this point?
Another question I have regarding a clean wipe: If I end up having to clean off the HD and lose all my data, I'll lose the iTunes configuration for my iPhone. Will iTunes be able to import my apps and settings from my phone if I plug it in?
Thank you very much.

For a hard drive try Newegg.com http://www.newegg.com/Store/SubCategory.aspx?SubCategory=380&name=Laptop-Hard-Dr ives&Order=PRICE
Or OWC http://eshop.macsales.com/shop/hard-drives/2.5-Notebook/
Here's instructions on replacing the hard drive http://creativemac.digitalmedianet.com/articles/viewarticle.jsp?id=45088
Here's a cheap SATA external hard drive case on eBay http://cgi.ebay.com/USB-2-5-SATA-HDD-HARD-DRIVE-EXTERNAL-ENCLOSURE-CASE-BOX-/120 636286623?pt=PCC_Drives_Storage_Internal&hash=item1c167ba69f

I tried copying a photo and pasting it in another event/group within iPhoto but the paste feature doesn't work. This wasn't an issue with both Leopard and Snow Leopard. Do you have any solutions or tips?

I bought a new MacBook Pro with OsX Lion as operating system. I use iPhoto a lot and when I tried copying a photo then pasting it to another event/group, the 'paste' feature doesn't work. This wasn't the case with Leopard and Snow Leopard where the 'paste' feature worked. What I did was to paste the photo first to the desktop before transferring it to the new event/group. I brought my Mac to the Apple store where I bought it and the technicians were themselves surprised that the 'paste' feature didn't work. Chalked it up to glitches in the Lion os. So how do we fix this? I just find it absurd that a feature that used to work in Snow Leopard has been disabled in Lion, and the user still has to undergo an additional step to make it work, when new technology is supposed to make things easier for users.
Also, hasn't anyone noticed that it takes longer for the computer to boot upon opening?

Instead of copy and paste drag the photo to the new event. Or flag it and use the add flagged photos to selected event command
LN

CAn I run Lion and snow leopard on the same computer with different sign-ins?

CAn I run Lion and snow leopard on the same computer with different sign-ins?

Alternatively, partition your internal HD and dual-boot it. Do note that you have to reboot to switch back and forth. You can't do it by logging out and back in.

New iPod Touch won't sync with computer - have latest version of iTunes and Snow Leopard. Computer won't even acknowledge the iPod.

New iPod Touch won't sync with computer - have latest version of iTunes and Snow Leopard (10.6.8). Computer won't even acknowledge the iPod. Have restarted both, changed ports, etc. What's do I need to do?

Have you tried here:
iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X
Do not forget the Additional Information topic.

IPod touch second generation. Trying to sync to mac. Have updated itunes and snow leopard. When I plug it in, it is recognized in iphoto, not itunes. ipod is freezing. Have tried several times to set back to factory settings, but computer wont see it

iPod touch second generation. Trying to sync to mac. Have updated itunes and snow leopard. When I plug it in, it is recognized in iphoto, not itunes. ipod is freezing. Have tried several times to set back to factory settings, but computer wont see it

Try here:
iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X

Dual boot drive - Mountain Lion and Snow Leopard - Correct order to load software /apps?

Hi
I want to create a dual boot drive for Mountain Lion and Snow Leopard as some of my hardware (is not supported in Mountain Lion).
I am happy how to do this, I just want to know if there is a correct way to install software and apps.
My plan was to do a clean install of both using two partitions, the larger going to ML and smaller one for SL. I was going to install SL from the DVD and then after updating from 10.6. to 10.6.8 and download ML from the app store and install on the larger partition.
Do I install all the software I use like Final Cut, Aperture, iLife (for Garageband) etc on the ML or SL partition or on both. Also, is there a better way / practise of the order software updates / apps and boxed software should be installed when doing a clean machine install.
Thanks in advance.
Matt

Thanks mende1
So, if I have software I need to use on both ML and SL - for example Final Cut as I have a Canopus AVDC box which is not supported in ML but only SL, do I need to install the same software in both OS?
I usually open apps using spotlight and didn't know if it would software / apps would open if already installed on the other partition?
Thanks again
Matt

Flash Video and Snow Leopard

Similar Messages

Maybe you are looking for