Flash Video Encoder – execution fails
Hello all,
if i want to start the flash video encoder i get this error
message: "The licensing subsystem has failed catastrophically!". I
try a Reinstalling but also it does not work!
Can anyone help me?
Greets timo
Hey I got it mixed up..... This is Flash Media Encoder 2.
What I have is Flash Video Encoder CS3.
What additional features can I get with Flash Media Encoder
2? Can it still work together with my current CS3 suite?
Similar Messages
-
Final Cut Pro, Flash Video Encoder & Flash Player
Well, let's get started.... I'm getting real frustrated with
Adobe. I emailed them about this problem two months ago and NEVER
got a response. This is extremely unacceptable product support. We
just purchased the Creative Suite Premium two months ago and have
never gotten Flash Video Encoder to properly encode a Quicktime
video exported from Final Cut Pro.
I have heard from a few on the Final Cut Pro forum on
Creative COW that there is a bug with this issue between Flash and
Final Cut Pro. Adobe doesn't seem to care if I report it, so that's
why I am here.
I create my program as usual, export a Quicktime file (not
reference video, but a full self-contained Quicktime). BTW, I have
Quicktime 7.2 on my Mac Pro Quad 3.0 with 8 gig of RAM. I open
Flash Video Encoder to make my flash files. Import the Quicktime
and select my settings which are custom. I set it to encode and
wait for the encoding to be done. It takes about 1 1/2 hours to
encode a 23 minute program. After the encode is finished, I check
the Flash file by opening it up. BTW, I also have installed a copy
of On2 Flix Exporter, which encodes Flash files, too. The On2 Flash
player is the only player that works. Adobe's Flash player opens
but it won't open ANY Flash files.
Has anyone seen this?When I try to import it on FCPX it says "None of the selected files or folders can be imported. Change the selection and try again." and even on Compressor it either doesn't play and fails to convert, or else it plays only a the audio but once I've completed the process the outputted file doesn't play anything.
Here's a screenshot at my different attempts to convert it. I managed to get the record the video on VLC, but I can't record the audio so I tried getting only the audio form Compressor as well, but like I said the outputted file doesn't play any audio even though it's as long as the video (36 mins approx.). -
Flash Video Encoder Quit Unexpectedly
I have an Intel iMac and when I first loaded my Adobe Suite
everything worked fine, but then the Flash Video Encoder stopped
working with "Flash Video Encoder Stopped Unexpectedly" and I
cannot get it to work again. I deleted the files and reloaded the
program from the original DVD and that did not work.
When I was setting up a new user on my iMac, I tried running
the Flash Video Encoder in the other user and it ran fine, but when
I returned to the main user, it would not start and gave the same
error. I'm relatively new to Macs - a bit more than a year - so I
suspect it is some setting or preference or something that I have
wrong.
Any suggestions would be most appreciated. Thanks.
-Brian-I am getting the exact same error on my windows vista x64.
I've also tried uninstalling and reinstalling quite a number of
times with no luck. I don't believe it is anything done wrong but
has to be some kind of bug in the installation somewhere.
Also any help would be appreciated.
Mike -
Accessing Flash Video Encoder Programmatically
At the moment I am working on a batch program that will take
video files, and /encode them into FLVs. I would like to do this in
a programmatic (command line way), so that I can can embed this
into a nightly batch process.
Can the Flash Video Encoder support this need?As far as I know about FFMPEG, it does not encode using on2
vp6, which is the superior codec for flv. I too am looking for a
programmatic way of transcoding to flash using the on2 vp6 codec.
on2 has the Flix Engine SDK, which is quite expensive, but it
allows you to programmatically transcode using vp6.
If there is another product out there that can do this (at a
non-expensive cost) I would love to hear about it. -
Flash Video Encoder for WMV - DW8 vs CS5
Hi,
I'm trying to convert a WMV file into Flash. I know that this can be done using DW8's Flash Video Encoder ....but it seems this function is no longer availabe in CS5.
I would be grateful if someone confirm that this understanding is true.
Many thanks
KTI think this is true. I'm using MacVide VideoFlash converter now. It has trial
http://www.macvide.com/Macvide_VideoFlash_Converter/ - good prog) -
Flash Video Encoder Version Update
I have version 1.0 of the Flash Video Encoder. This came
bundled with Adobe Web Bundle (Macromedia Studio 8 - including
Flash Professional 8 and Adobe Creative Suite 2). I need version
1.2 or above in order to include metadata so my .flv files will
play in Captivate and on web pages. How can I get an upgrade of the
Encoder?You are mistaken about that I think. There is a Flash Video
Exporter for MX 04 that can go up to version 1.2. The Flash Video
Encoder that comes with Flash Pro 8 only goes to 1.0.
http://www.adobe.com/support/documentation/en/flash/mx2004/readme/fmxpro2004_video.html
http://www.adobe.com/products/flash/flashpro/productinfo/encoder/
So, does Captivate say it needs V1.2 of the Exporter or the
Encoder? I don't have Flash MX04 so I don't know the
difference. -
I'm trying to convert a 4.5 minute *.avi to *.flv and am
having some difficulty. Flash Video Encoder says I have about 15.5
hours remaining (am 0.5 hours into the process). That seems wholly
unreasonable given the fact that it took me all of maybe 5 minutes
to save it as an XviD-encoded *.avi with VirtualDub...
Any ideas as to how I can speed this up?I'm having a similar problem - but my issue has to do with
why the time to encode on my Mac Pro is slower than on my
associate's Power Mac G5.
I'm using the Flash 8 Video Encoder to convert .mov files to
flv files on a group license. On my station I have the following:
Hardware Overview:
Model Name: Mac Pro
Model Identifier: MacPro1,1
Processor Name: Dual-Core Intel Xeon
Processor Speed: 2.66 GHz
Number Of Processors: 2
Total Number Of Cores: 4
L2 Cache (per processor): 4 MB
Memory: 12 GB
Bus Speed: 1.33 GHz
Boot ROM Version: MP11.005C.B08
SMC Version: 1.7f10
I've got 151 GB available on my system drive.
Presently, it is taking me approximately 2 hours 45 minutes
to convert a 6 minute 26 sec mov to a flv with custom settings of:
Max Date Rate: 300 kbps
Frame Rate: Same as Source
Audio Data Rate: 48 kbps (mono)
500 x 333 pixels.
HOWEVER, on an associate's computer he is able to convert
under the same specs, same files, etc. in 1 hour 40 minutes.
His computer specs are:
Power Mac G5
Processor Speed - 2.3 GHz
2-CPU's
L2 Cache - 1 mb per CPU
Memory - 16 GB
Bus Speed 1.15 GHz
My computer has much more powerful processor, so we're
confused why it's taking longer on my computer.
I also have a second internal drive but presently the
programs and source file are on my system HD. Someone suggested
that I should try to make sure that the Video Encoder has max RAM
allocated to it as well as having the scratch disk and cache set to
the second internal drive. I don't know how to do this or even if
it's possible but looking for advice and suggestions on how to
better optimize the Video Encoder and would appreciate any help
with this ASAP.
Thanks! -
MPG to FLV prob using Flash video encoder
I've been using the flash video encoder to convert videos to
FLV to put on websites.
Today I converted a MPG file to FLV.
The original MPG video worked fine, the FLV file played sound
but no picture....any ideas ?Hi,
I have this problem too - I have converted wma files and mpg4 to flv. The encoder does not error but when I play the FLV there is audio but no picture. I am using Windows XP. Is there a solution to this issue? -
Qmaster and Flash Video Encoder 8
Can I use Qmaster to set up a render farm to encode Quicktime movies to FLVs using Flash Video Encoder? If so, does anyone know where i can find the command lines samples to se up the Macs?
http://manuals.info.apple.com/en/AppleQmaster3_UserManual.pdf
Pages 18 and 29 should be helpful.
However, it might just be easier to encode to H.264. -
From Adobe home page -> Support -> Document -> Flash
I found a "Flash Video Encoder User Guide" talk about this
Flash Video Encoder. But throughout the Adobe web site, I can not
find this product. Is it part of other product or it has another
name?
And how to buy/get it?
Thanks.It's part of the Flash Product.
-
CS3 Flash Video Encoder no sound
I have been using the Macromedia Flash FLV encoder for a very
long time, but now that I have upgraded to the CS3 Flash Video
Encoder the video gets encoded but the audio is always missing.
All my settings are the same as they always were and when I
encode an AVI to FLV the audio is missing. How do I fix
this?I to am having the same problem with the flash encoder. Added
a wmv file and a mov file to the queue and I get the same results.
I do however see the first frame of the movies. Cannot set in and
out points because the first frame displays while scrubbing.
Model Name: MacBook Pro
Processor Name: Intel Core 2 Duo
Processor Speed: 2.4 GHz
Memory: 4 GB
Adobe suite CS3 - all updated. -
Hi,
Where did you find Adobe Flash Video Encoder, please.You're looking for Adobe Media Encoder
Windows: http://www.adobe.com/support/downloads/product.jsp?product=160&platform=Windows
Mac: http://www.adobe.com/support/downloads/detail.jsp?ftpID=4868 -
Flash video encoder changes video size!
I have a 1920 X 1080 MOV video that I encoded. The Flash video that is resulting is a 1440 X 1080 FLV. Any idea why it is squeezing the video like this?
ThanksHey I got it mixed up..... This is Flash Media Encoder 2.
What I have is Flash Video Encoder CS3.
What additional features can I get with Flash Media Encoder
2? Can it still work together with my current CS3 suite? -
Flash Video Encoder - Sizing Video
Hello
I have an uncompressed video at 720x486. I need to encode it
to Flash video at 640x480. When I import it into Flash Video
Encoder, I use the custom settings to output a 640x480 movie at
30fps and 550kbps using the VP6 codec.
Flash video outputs a 720x486 movie.
What am I doing wrong?
http://www.dorseygraphics.com/forumphotos/flashvideo.png
Thanks,
---------------------SI've never had a problem with videos not being resized... and
many times
I've made video thumbnails. How are you determining the
output is incorrect
anyway? I'd guess it is your method that is wrong - if the
encoder did not
resize properly this question would come up daily...and it
doesn't.
Dave -
Head Developer
www.blurredistinction.com
Adobe Community Expert
http://www.adobe.com/communities/experts/ -
Flash Video Encoder conflict with Safari for Windows
I installed Safari for Windows (AMD/Windows XP) without the
options (no Bonjour) and found that it disabled Adobe Flash Video
Encoder (tries to reinstall, can't find msi, can't reinstall from
disk, 1 keeps asking for disk 1). Uninstalled Quicktime, didn't
help. Uninstalled Safari, rebooted, still can't get Flash Encoder
working.timtro;
Many (myself included)won't be installing safari/win until
the final
release, and I suspect Adobe won't test much until then
either, so it's
probably best to report this to apple as a possible bug with
their
beta. -Tom Unger
Maybe you are looking for
-
Printing problem with HP LaserJet Printer since Mavericks Installed
Hello, I'm working on iMac and I have recently installed OSX Mavericks. I have now printing troubles with my printer HP LaserJet P1102w. Sometimes it prints, sometimes it doesn't. When it doesn't print I often need to suppress the file in the printer
-
Apple TV (Gen 2&3) takes several hours to load a movie from the iTunes Library
I know this had been discussed before, but a went through all posts that I could find and never found a solution. I will list below everything I have tried and if anyone else has ANY ideas I would be extremely greatful to hear them! To reiterate th
-
I want to join some split files into one. In command prompt I use COPY /B file.1+file.2 file to join the files. How can i do the same in my java application. Please show the code which I suppose will use getRuntime. Thanks in advance.
-
ID CS3 export to PDF - how to get superscripts into bookmarks ?
I'm exporting my InDesign (CS3 Design Standard) file to PDF, and the headings are all nicely showing up in the bookmarks, but the superscript chars in my headings (such as the trademark symbol) are showing as regular chars in the resulting PDF bookma
-
Displaying the roles in the adobe form for the corresponding system
Hi Gurus, I have two fields in my WDP Abap interactive form. In first filed, 2 radio buttons are there (1. SAP R/3 system, 2. BW System) As per this selection, I need to bring the existing roles and display them in the Adobe form. I know the technic