Flash Video Help FLV
I have a project for work where I have to create an online
educational video catalogue.
The videos are uploaded to the server. What I want to do is
transform the videos from various formats into flv (flash video
format) similar to the way youtube does it.
Does anyone have any idea of how to do this and if there are
any free tools to transform the video to flv format before, during
or after upload. (during or after upload would be best)?
anyone have any idea how to do this?
Similar Messages
-
Does quicktime support flash video or flv format
Does quicktime support flash video or flv format
Not natively; it only works if Perian is installed, and then only in Mac OS X 10.8.5 or earlier.
(112327) -
I am trying to put a flash video on a website. I have the
.flv file encoded. I followed the instructions to
Insert>Media>Flash Video. Got the .flv file in the root
folder, picked a skin, etc. When I view the page in the browser
from Dreamweaver, it works just fine. So I uploaded the site to the
server and tried to view it straight from the browser (rather than
through local files). No flash video. The page appears as I
designed it, only in the middle where the video is supposed to be
it is just blank (black, just like the background). Any help would
be greatly appreciated as its frustrating when you have it working
all the way through the "preview in browswer" and when you upload
to server it still doesn't work. I upoaded the html page and all
dependent files as well. Thanks in advance.
URL posted below:
www.spottedtailproductions.com/videos/Upstream_flash.htmlYou need to upload the SWF file referenced in your html code.
http://www.spottedtailproductions.com/videos/FLVPlayer_Progressive.swf
--Nancy O.
Alt-Web Design & Publishing
www.alt-web.com
"STPfilms" <[email protected]> wrote in
message
news:ffr2u6$a2u$[email protected]..
> I am trying to put a flash video on a website. I have
the .flv file
encoded. I
> followed the instructions to Insert>Media>Flash
Video. Got the .flv file
in the
> root folder, picked a skin, etc. When I view the page in
the browser from
> Dreamweaver, it works just fine. So I uploaded the site
to the server and
tried
> to view it straight from the browser (rather than
through local files). No
> flash video. The page appears as I designed it, only in
the middle where
the
> video is supposed to be it is just blank (black, just
like the
background). Any
> help would be greatly appreciated as its frustrating
when you have it
working
> all the way through the "preview in browswer" and when
you upload to
server it
> still doesn't work. I upoaded the html page and all
dependent files as
well.
> Thanks in advance.
>
> URL posted below:
>
>
www.spottedtailproductions.com/videos/Upstream_flash.html
> -
Embedding Flash Video - Help needed!
I'm fairly new to Flash and trying to embed a video to my
website. When I import my video and test the movie, it works
perfectly, showing the controls at the bottom and everything. When
I add it to Dreamweaver and test the page, it only shows the video
(sans media controls) and automatically plays when the page is
loaded. What am I doing wrong??
I'd like to upload the flash video w/media controls beneath
it, to dreamweaver and it remain paused until the viewer hits the
play button.
Can anyone help?kyconjim wrote:
> I'm fairly new to Flash and trying to embed a video to
my website. When I
> import my video and test the movie, it works perfectly,
showing the controls at
> the bottom and everything. When I add it to Dreamweaver
and test the page, it
> only shows the video (sans media controls) and
automatically plays when the
> page is loaded. What am I doing wrong??
>
> I'd like to upload the flash video w/media controls
beneath it, to dreamweaver
> and it remain paused until the viewer hits the play
button.
>
> Can anyone help?
Dreamweaver does not reflect full functionality, you need to
upload your stuff to
server or test in browser. Best way to make sure things
works.
If your HTML refer to the SWF in some directory, make sure
you have correct paths
to the player skin (the video controls).
Best Regards
Urami
"Never play Leap-Frog with a Unicorn."
<urami>
If you want to mail me - DO NOT LAUGH AT MY ADDRESS
</urami> -
Savinf flash video as flv not fla?
im trying to save my flash video as a flv but when saving the
document i only get offered to save the file as a fla? can somone
please tell me why. dreamweaver wont let me insert a video if it is
not saved as aflvNo... if you want to maintain your vectors and your
actionscript, you need to export to .swf. FLV is a video format,
and nothing more. You can embed metadata in an flv that an .swf can
use in it's actionscript, but the flv alone can't do it.
Now, if you just want to turn a flash animation into an flv,
export the .fla to avi, and then transcode the avi to flv. -
Where flash video stores flv file path
Hi
i select from menu insert->media->flash video and then
select the flv file and click ok and i try to search for my file to
change it to dynamic criteria like <?php echo
$row_rsfnames['fname']; ?> to get flv files from a database
How to do that?
if this player doesn't support this feature i need DW
extension that can do this to get flv files from a database.
thanks in advance.any help
-
I have a problem with automaticly stopping external FLV video
(in flash 8
with Display component) at custom cue point. For example: if
video is 400
sec long, i wanted to stop it at 300 sec. I've tried with
totalTime action
but it only affect the slider. So, LuigiL sent me this
solution which
should, but - it doesn't work. Can you hel me fix the problem
with stopping
a FLV at a custom end point?
myDisplay.totalTime=300;
//use an object to listen for events
var myDisplayListener:Object=new Object();
//add event cuePoint to the object
myDisplayListener.cuePoint=function(eventObj:Object){
var index=eventObj.target.name;
if(index=="stop"){
myDisplay.stop();
//set up the listener
myDisplay.addEventListener("cuePoint",myDisplayListener);
//add a cuepoint
myDisplay.addCuePoint("stop",300);
Thanks
LukaNo, it still doesn't work. And i've checked everything, paths
are correct...
Well, it must be some tiny detail i overlooked. I'll figure
it out myself
from this point.
Thanks -
TotalTime action for Flash Video help
I'm trying to use totalTime action on MediaDisplay component
in Flash 8 to
set the duration of the external FLV video to some value: the
movie is 360
sec long, i tried to set its duration to 300 sec by applying
the action
_root.myDisplay.totalTime = 300;
The controler component adapts to the new totalTime value and
when the movie
reached 300 sec the slider stopped at the end of slider bar.
BUT, the movie
still went on plying beyond 300 sec, and the slider just
stood still at the
end point of the slider bar.
How can i REALY adjust the total playable time of the flv?
Thanks!Fishy? I like fish! Had it for dinner last night.
When you add a cuepoint the Media Component instance fires an
event 'cuePoint' and you use the listener to respond to that event.
When the event gets fired an event object is passed to the cuePoint
event handler of the listener object. The event object contains the
name of the event and the time. The name of the cuepoint is
accessible with:
eventObj.target.name
and the time with:
eventObj.target.time
Nothing fishy about it. -
Hi Everyone-
I just finished up a website - on the homepage, there is a
video in flash which I created using the >import flash feature
from the file menu.... My problem is that it has a "black colored"
screen and it stays that way until a user presses play... Can
somebody please tell me how I can get an image to display there
until someone does press play? I have searched all over google and
other forums and cannot find a tutorial or anything.
The website is www.roandrandy.com. Any advise is greatly
appreciated!
-Eric51 Users online and not one person can reply... jeez
thanks... -
Everything I see here says yes, but I don’t see that option in the software.
The only thing I want to do with this software is create a FLV video file with a transparent background using RGB+Alpha.
I’ve seen After Effects v3 do what I want, and this video says the version I have will do just that (http://www.peachpit.com/podcasts/episode.aspx?e=5a0c0558-708a-4511-af87-41797811841d), but I don’t have a FLV option in export. Could it be I have some options set incorrectly? -
Hallo
leider habe ich arge Probleme bei einer lokalen Flashanwendung mit externen Videos.
Das ganze wird als Projektor.exe exportiert und läuft auf einem Dual PC/windows 7, ich habe es aber auch auf Windows 2000 /vista und Xp getestet - überall die selben Probleme.
Situation: ein ganz einfaches 4 Fach Menü - bei klick wird über die FLv Komponente ein flv geladen( ich habe es aber auch schon mit Mov, mp4 und f4v geladen.
Problem: manchmal werden die Videos nicht geladen bzw der Ton läuft aber kein Video zusehen.
Alle Videos laufen einwandfrei mit Vlc oder Quicktime player.
Merkwürdig ist auch : über das Menü kann man die Videos einzelnd auswählen da läuft dann mal ein Video nicht - wenn ich aber ein Videofenster habe und von da aus dann zum nächsten Video springe- über ein "next Button" dann laufen oft 2-3 Videos nicht. geh ich wieder zurück ins Menü und wähle von da aus ein Video dann wie gesagt läuft 1 von 4 nicht.
Kann mir das jemand erklären--
Hilft es was wenn ich die Buffertime höher setzte- sie steht jetz auf 0.1
oder kann mir jemand sagen ob es Probleme gibt wenn die Flv Komponente immer den gleichen Instanznamen hat. ich habe ca. 4 x4= also 16 Instanzen der Flv Komponente - der Unterschied ist der das immer ein anderes Video über den Contentpath geladen wird.
und ich habe ein "Spring zum Menü" code für das Ende der Filme je auf dem Frame wo die Flv Komponente sitzt :
vidListnr = new Object();
vidListnr.complete = function(evtObject){
trace("Video-Ende");
_root.gotoAndStop(2);
vid.addEventListener("complete",vidListnr);
leider ist das Projekt zu gross, um es online zu stellen. die Videos sind ja für den lokalen Palyback bestimmt.
dankehier habe ich das Projekt abgespeckt hochgeladen-
http://rapidshare.com/files/406870473/Test.rar
http://rapidshare.com/files/406883868/Test_cs3.rar
das Projekt muss per Projektor.exe ausgegeben werden.
Wenn man bei den Filmen über den Menütasten Vor und zurück springt - hat man
irgendwann das Problem- das der Sound läuft aber das Video nicht.
Einfach mehrmals durchklicken.
danke -
Hi Guys
I'm trying to insert a flash video file (FLV) that has the
controls as a separate swf using SWFObject. The flash was created
in Flash 8.
I'm not sure of the actual code I need to get this to work
though.
The html file that should contain the flash is
/Careers/index.html.
These files are in the /Careers/flash/ folder:
ClearOverPlaySeekMute.swf
complete_david_w_headshot_small_controls_over.swf
complete_david_w_headshot.flv
I have also tried inserting the Flash Video using Dreamweaver
8 (Insert -> Media), however, there were two problems in IE.
1. You still needed to activate the flash and
2. When playing the video, it wouldn't play the last 2
seconds. However, pausing and the playing again from that position
does play the remainder.
I also preferred the DW 8 Clear Controls Skin over the Flash
8 one, so is it possible that I could attach this somehow to the
FLV?
I'd really appreciate some help.
Thanks
MattHi Guys
I'm trying to insert a flash video file (FLV) that has the
controls as a separate swf using SWFObject. The flash was created
in Flash 8.
I'm not sure of the actual code I need to get this to work
though.
The html file that should contain the flash is
/Careers/index.html.
These files are in the /Careers/flash/ folder:
ClearOverPlaySeekMute.swf
complete_david_w_headshot_small_controls_over.swf
complete_david_w_headshot.flv
I have also tried inserting the Flash Video using Dreamweaver
8 (Insert -> Media), however, there were two problems in IE.
1. You still needed to activate the flash and
2. When playing the video, it wouldn't play the last 2
seconds. However, pausing and the playing again from that position
does play the remainder.
I also preferred the DW 8 Clear Controls Skin over the Flash
8 one, so is it possible that I could attach this somehow to the
FLV?
I'd really appreciate some help.
Thanks
Matt -
Flash Video - Probs with NetStream.onMetaData
So i have created a video player and have noticed something
about the onMetaData function. I have a path to the videos as a
relative path to my .swf file ( myPath = 'media/'; ) and when i
test my movie, the onMetaData function does not get called.
However, when everything is online, or being pulled from an
absolute path ( myPath = '
http://www.mydomain.com/media';
) it is called.
I was just curious as to why that is...?ewon15,
> well i'm using actionscript 2.0 ... i have not had a
chance
> to dive into AS3.
No worries. :) It just makes a difference in regard to
whatever
snippets or samples would be helpful to you.
> i'm not sure what you mean when you ask me if there is
> metadata in my FLV...
When the FLV file is encoded, it may or may not have
additional
information -- the metadata -- embedded into it. MP3 files,
for example,
mainly contain audio recordings, but they have the capability
of also
containing metadata a such as copyright date, the recording
artist's name,
etc. If your FLV has no metadata, then the
NetStream.onMetaData event won't
be prompted to do anything.
> but the way i know the onMetaData method of the
NetStream
> class was not being dispatched was by the timer and
scrubber
> i set up...plus i put a trace in the method and it was
not outputting
> anything...
Sometimes it helps to trace more than just the value of a
given object.
It's possible, for example, that the trace() is indeed
putting content to
the Output panel, but maybe that content is an empty string.
> here's the gist of my code:
> [lots of code ...]
Aha. So your trace is "hello," which should certainly be
visible in the
Output panel -- provided the FLV file has metadata. That's
good. And
you're saying that everything works with absolute paths, but
not relative
paths? That makes me wonder if the relative path is hitting
the video file
at all. (Of course, it would presumably be obvious if not,
because you
wouldn't see the video at all.)
A quick glance at your code doesn't reveal to me anything
outright
wrong. Some of that code looks like it was suggested by one
of my blog
articles, but I can't be sure of that. (I was going to refer
you to my
blog, but I didn't want to send you on a wild goose chase, if
you'd already
come from there.)
My general approach, when I run into something baffling like
this, is to
isolate the problem area in a separate FLA, so I can study it
without the
distraction of the rest of the code. Here's a quick snippet
from the Help
docs, for example ...
var nc:NetConnection = new NetConnection();
nc.connect(null);
var ns:NetStream = new NetStream(nc);
ns.onMetaData = function(infoObject:Object) {
for (var propName:String in infoObject) {
trace(propName + " = " + infoObject[propName]);
ns.play("
http://www.helpexamples.com/flash/video/water.flv");
Paste that into a new FLV, test the SWF, and see if you get
output in
your Output panel. You should. Then save that new FLA into
the same folder
as your existing work and change the absolute path of that
Adobe file to the
absolute path of one of your own. See if the same sort of
output appears in
your Output panel. It should. If it doesn't, that means your
FLV doesn't
have metadata. If it does, remove the URL portion and see if
it still works
locally for the same FLV (your FLV), but with a relative
path.
David Stiller
Adobe Community Expert
Dev blog,
http://www.quip.net/blog/
"Luck is the residue of good design." -
Flash Video in template child pages
I have created templates with editable regions for my
websites. When I try to insert a Flash video file (.flv) it wants
to put code in the header region and body region. I have tried
erasing the editable areas, making the entire header an editable
area, making the entire site an editable area. I've tried looking
on Google and the Dreamweaver Developers section (there is a link
to an answer but the link is broken). I unfortunately only have
Dreamweaver 8. If this problem is fixed in CS3 I'd be happy to go
to Kinkos and rent a machine. Any suggestions?
Thanks!Here's how you will have to manage this.
When you insert a Flash video on the page, several things
happen -
1. DW inserts a link to a javascript file in the head of the
page.
2. If you elect to check for Flash versions, DW inserts a
call to that
javascript in the <body> tag of the page.
3. DW then inserts a javascript call to the file (in #1) on
the page at the
location where the Flash is to appear.
In a Template child page -
1. The head region must have an editable region in it, so
that the link can
be inserted.
2. The Flash check call will fail to be written to the body
tag, since that
is LOCKED by the template.
3. The javascript will be written to the body of the page
where you
inserted the Flash.
Thus, 2 of the 3 elements should work fine.
My suggestion? Do it again, and do not select the check for
Flash version -
that should work for you.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"cybergrace" <[email protected]> wrote in
message
news:f9vjls$a9n$[email protected]..
>I have created templates with editable regions for my
websites. When I try
>to
> insert a Flash video file (.flv) it wants to put code in
the header region
> and
> body region. I have tried erasing the editable areas,
making the entire
> header
> an editable area, making the entire site an editable
area. I've tried
> looking
> on Google and the Dreamweaver Developers section (there
is a link to an
> answer
> but the link is broken). I unfortunately only have
Dreamweaver 8. If
> this
> problem is fixed in CS3 I'd be happy to go to Kinkos and
rent a machine.
> Any
> suggestions?
> Thanks!
> -
Put Flash Video on an iPod?
Has anyone tried to sabve Flash Video files (flv) so that they can be imported to an iPod?
Thx,The iPod cannot play flash video. It can only play video that meets the following requirements:
H.264 video: up to 768 Kbps, 320 x 240, 30 frames per sec., Baseline Profile up to Level 1.3 with AAC-LC up to 160 Kbps, 48 Khz, stereo audio in .m4v, .mp4 and .mov file formats
MPEG-4 video: up to 2.5 mbps, 480 x 480, 30 frames per sec., Simple Profile with AAC-LC up to 160 Kbps, 48 Khz, stereo audio in .m4v, .mp4 and .mov file formats
You'd have to find a way to convert the flash movie into some compatible format that meets the specifications above.
Maybe you are looking for
-
Links in Subscriptions emails do not take you to the new post when clicked. Having to scroll to the new post (when the blue indicators are on) is a pain.
-
Uploading Material and Plant Masterdata
Hi BW experts, I am trying to upload master data from R/3 Prod for 0Material & 0MAT_PLANT. My upload failed as some of the materials and plants created in R/3 have been created with a space character at the end of the name (i,e '1000 ' as a plant, n
-
Third-party effects/plugins for x-
Ok... so i've got my xtrememusic. I love the equalizer, the crystalizer, the eax modes. I love how they don't degrade the sound one bit while doing their thing, unlike Winamp dsp/eq plugins. but my question is... why haven't i seen one single third-p
-
Hello! In Camera Raw 8.3 I used the Preview button on each tab of correction (Basic, Curve, Effect, Lens Correction.... and others) very often it is important for me. I could look at result of concrete correction on each separate tab (Basic, Curve, E
-
Does Solaris Volume Manager support USB flash drives?
I would like to mirror or stripe across multiple USB flash drives on a Sun Blade 100 workstation running Solaris 10. Thanks!