Flash video lags when uploaded to Youtube.

Hi.
I have tried to upload one of my flash videos on youtube, the only problem is that it lags!
The sound is perfect, but the film only shows about 1 frame per second, when it's supposed to be 12 frames per second. This is obviously nothing worth watching when the picture lags as much as it does.
I have uploaded the same video on my facebook profile, and it worked pretty good, but as I already said, it lags when it is on youtube.
I don't have any movieclips in the movie I uploaded to Youtube.
Does it have anything to do with the settings on the movie? I eksported it in to a quiktime film before I uploaded it to youtube. I saw a tutorial where the person exported his flash into quiktime and uploaded it to youtube, and the animations were smooth, but when I do this, it lags.
Can anybody help me?

I don't see that. To me, it looks the same quality as any YouTube video.
How do most YouTube videos look to you?

Similar Messages

Low video quality when uploaded to youtube

I edited a YouTube webseries for some friends of mine using iMovie 11. It was filmed using a Sony Handycam DCR TRV33. This is not a high definition camera, it is standard definition, but the video quality still looked pretty good when I was editing it on iMovie. I exported it to Quicktime, then uploaded it to YouTube from my desktop (I had read that this was better than uploading it directly from iMovie). In Quicktime it looked fine, but then once it was on YouTube the video quality was significantly worse. Does anyone have any tips on how I can improve this? Here is a link to the video: http://www.youtube.com/watch?v=y1KPhrnisMQ
Thank you for your help.

I don't see that. To me, it looks the same quality as any YouTube video.
How do most YouTube videos look to you?

Video taken from Iphone vertically has thick black border around it when uploaded to youtube. Any way to fix?

I edited a bunch of clips taken from my Iphone, some vertical some horizontal. I put them together on Final Cut Pro but when uploaded to youtube, the clips recorded vertically have thick black edges and the video itself looks tiny! Is there any way to fix this? Please help!

You need to sort some stuff out.
Your source is pal 25 frames in SD
Your offline footage is HD with a framerate 29.97.
You need to set your sequence the same as your footage.
Then export again with the same framerate.

Youtube videos lag when i stream them!

youtube videos lag when i stream them!

Hi cybervibin,
Have you looked at our [https://support.mozilla.org/en-US/kb/fixing-facebook-or-youtube-problems YouTube troubleshooting section]? There is a lot of useful information in there specifically for the issue you describe.
Hopefully this helps!

Bad quality when uploaded to youtube?

I have adobe premiere elements 12 to make youtube videos. I uploaded the first video and that one had a black border 1440 X 1080 HD, and then I tried a second video HD 1920 X 1080 which didn't have a black border but the quality was terrible. I am new to editing and filming, how do I get the quality to be as good as it is in the editor when uploaded to youtube?

divinejoy916
We will do just fine. And, I am not seeing any problems exchanging information to get the core of your Premiere Elements YouTube problems. I will write as clearly as possible. If there is something that you do not understand, I will rewrite.
Computer
You did a great job with the install of the program. If you did not open a new project and go to the workspace and Help Menu/Update, then you are still working with the 12 version. To go from 12 to 12.1 Update, then use that Help Menu/Update. If you are interested in Text Styles, that 12.1 Update has resolved an issue with Text Styles in the Expert workspace.
Project Preset
The program is designed to set the project preset automatically to match the properties of your source media. The setting of the project preset directs the program to set up the correct space in the Edit area monitor for editing. Sometimes the program does it right, sometimes not. If not, then you set the project preset manually to match the properties of what you know the source media to be. Some background information on that
ATR Premiere Elements Troubleshooting: PE11: Accuracy of Automatic Project Preset (New Project Dialog) Setting.
The first thing we need to know is what we are starting with as your video source for the project. We probably can get all the information that we need to know about properties of the source media from the brand/model/settings for the camera that recorded that Timeline video. Do you have other than video on that Timeline, like jpeg photos? By video properties, I mean video compression, audio compression, frame size, frame rate, interlaced or progressive (1080i or 1080p), and pixel aspect ratio.
Once we know that we can cross catch with the project preset and react accordingly. From what you wrote, your project is set for the default NTSC AVCHD Full HD1080i30 which may or may not be correct for your video source.
Export
You wrote
Im publish sharing using the HD presets.
Still not sure what you are doing with the export, and that is important to be able to trace down to the cause of the issue. You can upload your Timeline content to YouTube two ways for your 2 minutes and 52 second Timeline
a. Publish+Share/Social Websites/YouTube with Presets = High Definition for YouTube 1920 x 1080 - the uploading of the Timeline is done from within the program using your YouTube account that you set up. (Keep away from the 1440 x 1080 choice.)
or
b. Publish+Share/Computer/AVCHD with Presets = MP4 - H.264 1920 x 1080p30. Here you export to an AVCHD.mp4 file saved to the computer hard drive and then upload that AVCHD.mp4 file to YouTube at the YouTube web site.
Which one of those two are you doing?
Please let me know if you are OK with the above. If not, please tell me what I need to clarify further.
Summary
First let us target getting the properties of your source video for this project one way or other.
Thanks.
ATR

Device a Little Warm When Uploading to YouTube

I shot a 2 minute video then uploaded it to YouTube. The first upload failed as I think the device went to sleep. Changed the setting and the second attempt worked. The combined upload time was probably a good 20 minutes or so. I noticed the device got warm on the back panel, almost hot. I am using a CapsuleRebel case.
Anyone else notice the heat when uploading to YouTube?

Each iPhone, even the 1st generation and also the 3Gs, warm up when they are "active". Each microprocessors develops heat when active; the more active, the more heat. That's why Macs and PCs have fans inside.
You do not need to worry about that. It's normal physics.

How do I get HD quality when uploading to youtube?

Hello,
I have a sony HD camcorder that records AVCHD. In Pre Elements 8 I upload my finished videos on youtube, the video is pixilated. I think I have to change the compression or bit rate but i don't know how. When i play the video in Premier Elements 8 it is HD quality. How do I get that same quality when uploading to youtube??
Thanks,
Michael

And, remember that YouTube will encode any/all submissions to their specifications du jour. One is at their mercy in the end, and what looks great today, might look poor next week, or next month. Also, be sure to check out their printed requirements on the day that you do your Export/Upload.
Good luck,
Hunt

Can you make a emeded flash video disspear when finished

IS the a paramater or other setting to make a flash video
finish when it is finised. Its just a simple screencast video that
i want to totaly dissapera when completed

The only way I know to get html into flash is in a in a
dynamic textfield and what is allowed is very limited. I suppose
you were thinking of something in flash that looks like a table
that would be easy enough. Just do it after the end of the video
and it always helps to use multiple layers if there's any degree of
complexity.

I am unable to view flash videos from all websites except youtube after updating to Firefox 4. All help will be appreciated. Thanks in advance :)

I am unable to view flash videos from all websites except youtube after updating to Firefox 4. All help will be appreciated. Thanks in advance :)

Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
* Don't make any changes on the Safe mode start window.
* https://support.mozilla.com/kb/Safe+Mode
* [[Troubleshooting extensions and themes]]
If it does work in Safe-mode then disable all extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
* Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
* Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")
In Firefox 4 you can use one of these to start in <u>[[Safe mode]]</u>:
* Help > Restart with Add-ons Disabled
* Hold down the Shift key while double clicking the Firefox desktop shortcut (Windows)

My final cut video won't upload to youtube

My Final Cut Pro free trial video won't upload to youtube, It all goes fine but then it won't proccess completely. It get to be about 90% done and then it stops and won't proccess any more. What is happening and how can I fix it?

Are you absolutely sure it actually stops?
Once the process reaches 95% the movie is actually uploading to YouTube (not processing).
Dig into the info triangles on Share Monitor and if you watch the progress, it should gradually change the percentage completed - but it's slow as uploading is always slower than downloading.
Andy

I movie w/ spliced pics throw off movie when uploaded to youtube? The pics lag and is now off with the audio. Doesn't happen with video, just pics and it's worse if I splice the pics to fit audio. Suggestions?

This is really annoying. I movie hd works well when compressing it to quicktime and uploading to youtube but when there's pics involved and I have to slice them to fit audio it messes with the timing in conjunction to the audio. Any ideas? It works fine in quicktime when compressed but once it's uploaded to youtube it acts fishy. Even though it's fine in quicktime it seems to be an issue in I movie and how it's compressed or something.
I movie HD- 5.0.2
quicktime player- 7.5.5
Compression settings
compression: h.264
quality: high
key frame rate:24
frame rec: yes
encoding mode: multi pass
dimensions: 320x 240
sound
format: acc
sample rate: 48.000khz
channels:mono
bit rate:64kbps

That's fantastic, worked really well, just like you said. I actually didn't expect such an easy solution to my problem, thanks very much.
It had the added bonus that it allows me to import the files quicker than before to iMovieHD if I am editing them.
Thanks again

I'm new to FCPX and Compressor 4. My HD video looks terrible when uploaded to YouTube and are no longer 720 or 1080p HD. Are there codes or a secret handshake to have my HD video remain HD on youtube. All help appreciated.

I have been editing in FCP X 10.0.6 and have had success with that on my Mac Book Pro Retina. But when I go to compress the 1 minute video detined for YouTube inputing that I wish for it to remain in HD (720 and or 1080p) via Compressor 4, the video compresses and I upload it to youtube via their uploader and when the video is played back it looks aweful. Needless to say it is no longer HD and very blurry. Is there any help you can give me with step by step codes to follow to ensure my 1 minute video is viewable in HD? I sure would appreciate it. Thanks in advance.

Thanks a million Russ for you time and input. I have recompressed my project several times and that aspect has worked a charm. But I seem to come unstuck when I upload my compressed video to youtube only. All the presets seem fine and I have done it using either ProRes or Youtube/Vimeo HD options. I have just left them on my desktop and uploaded to youtube via their uploader from there after sucessfully compressing them with Compressor 4. Yet, there seems to be no improvement in the picture quality. Mind you the sound is fine. I will get busy with some screenshots if you still think they would be handy. Many thanks again for your consideration. I really had hoped it was as simple as a secret handshake too. Darn. LOL -RR

Why does my video get blurry when uploaded to youtube?

I shot my video on a 5d m2, Processed it in premeir Pro cs6 and exported full res and encoded for you tube. It is tack sharp on my computer quick time player etc, but when loaded into youtube looks like a cell phone video. Please help! Thanks to all for your help.

Try exporting using the H.264 preset for YouTube at the dimensions of your video. It sounds like you may have done that but you were not specific.
Also, verify that you are looking at the HD version of the video when you use the YouTube player. All this assumes that you waited long enough for YouTube to process the HD version. It first encodes a SD version, then it encodes the HD version.

Video lags behind sound in YouTube app

I am using the iPad mini with the latest iOS update (7.1.1). When I use the YouTube app, the video lags behind the sound. What I mean by that is that I play the video for a few seconds and the lip-synching will be off. If I then pause the video, I can see the video catching up to the sound. However, the video will quickly begin to lag behind the sound again. This makes watching anything with dialogue pretty awful.

The same issue is happening with the Netflix app. Also, apps like Facebook and Safari seem to be crashing much more frequently for me after this update.

Flash video artifacts when using discrete graphics

So I have a 2011 MacBook Pro with Intel and ATI graphics. When watching flash video (YouTube), I have weird artifacting going on when using just discrete graphics. While using Intel graphics, the video usually plays fine, just a little choppy. I am using gfxCardStatus to switch between them. Is this a flash bug or something else? I've added an image to show what I'm talking about.

Darrell110 posted in macromedia.dreamweaver
> problem is I do not want to use another player. I add a
lot of
> video for clients and I love how easy it is to do that
with
> Dreamweaver.
I don't see any evidence that you used Dreamweaver to insert
the
player. Normally, when you insert Flash with Dreamweaver, it
inserts
code I can readily identify. Did you use GoLive?
The pages you show are consipicuously missing the
<object> code and
the JavaScript that DW uses.
And I don't see any differences in the players. The pages
both link to
files named flvplayer.swf (in different folders) with the
same look and
the same file size. I am late in this thread, so maybe I
missed the
boat.
Anyway, I don't know if this would make a difference with
that player,
but one page uses a relative link to the .flv, while the
other page
uses an absolute link, including
http://. See if changing that one to a
relative link helps.
I only watched about a minute from both pages and, although
872 Kpbs
for the video track is VERY high, I did not see any glitches.
(Did you mean to use two slashes in the second link?)
> Here are samples using the same video file, only
different
> PLAYERS:
http://bobbywarns.com/viewvideo.html
>
http://bobbywarns.com//video/viewvideo.html
Mark A. Boyd
Keep-On-Learnin' :)

Flash video lags when uploaded to Youtube.

Similar Messages

Maybe you are looking for