Flash video not working on website

I created a Flash flv file and imported onto a web page. When
I tested it locally it worked fine but when I uploaded it to my
server the video was missing, as was the skin. Any ideas?

This is prob what you already know but i had this and this
helped. You have to make sure the flv file and the skin swf is in
the same directory as each other and make sure they are relative to
the web page.

Similar Messages

Flash video not working in IE

I’ve been making a couple of websites that need to
stream a little bit of Flash video. So I put together a little
Flash video selector swf using the simplest code (it has nothing
more than go to and play commands on the buttons and stop commands
on the timeline).
I’m also using the standard Flash wizard to stream the
video files using the low quality pre-sets on the transcoding.
I’ve used this method before and it seemed to work, but now
when I’m testing these sites in IE the Flash element seems to
crash all the time and freeze up the whole browser or the video
just doesn’t display. The weird thing is it usually plays the
first video but when you click the button to move to another it
crashes.
Here’s a couple of sites that it’s happening on
http://www.virtual360.org/v360/1.html
http://www.virtual360.org/video.asp
– they work fine in Firefox, but not in IE. Has anyone
seen this problem before? Any help would be much appreciated…
Kieran

Thanks. I'm not clear where you're referring to. There are currently two object tags. One has <object type="application/x-shockwave-flash"...> like you describe. The other has a different format.
I'm not clear on what/where I'm supposed to change.
Thanks...
-Jesse

Flash video not showing on website after upload

I created a short flash video using Flash8 and used
DreamWeaver8 to insert it into my web page. I can preview the page
in any browser using the "preview in browser" function of
DreamWeaver. It plays perfectly. However, when I upload the page to
my website the modified web page appears but there is nothing where
the Flash Video should be.
I upload in the following manner: Since I do all my web site
construction while away from the home server, I use my laptop to
modify things and then use a remote signin to my home computer that
is hosting the website which gives me access to my home computer's
(My Server) website folders. I then move a copy of the modified
page containing the Flash Video, the Video.swf file, and the
Video.fla file into the website files on the home server.
Why wont it play?
What am I doing wrong?

Hi I have a similar problem, imported a medium res flv clip
into flash, the clip is about 1Meg, works fine when playing back
the local flash site but does not work via server. A very simple
flash site with content all in same directory? using MX 8
pro

Flash Player not working on website

I have been getting complaints that my flash videos on http://www.lakefishingtechniques.com are not working right on safari moble. How can I correct this?

The problem was the Shockwave Flash Object settings on Internet Explorer was not enabled. I went to the TOOLS pull down menu and selected "Managed Add-Ons" and then selected the "Toolbars and Extensions" and found that Shockwave Flash Object was not enabled. Once I enabled Shockwave Flash Object everything worked correctly.

Flash Video Not Working

I have set up a flash video, and while it works in
DreamWeaver 8 (I use an XP Pro platform), it does not on the
Internet. There are three files that appear in a separate folder:
index.sbk
index.swf
index.swi
and all are uploaded to the Internet.
The code on my shtml page reads (the mixed caps and lower
case are not an issue, as everything else works on our site):
<script type="text/javascript">
AC_FL_RunContent( 'codebase','
http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=7,0,19,0','wid th','840','height','630','title','Welcome
Flash','src','SWiSH/index','loop','false','quality','high','pluginspage','
http://www.macromedia.com/go/getflashplayer','movie','SWiSH/index'
); //end AC code
</script>
<noscript>
<object
classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" codebase="
http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=7,0,19,0"
width="840" height="630" title="Welcome Flash">
<param name="movie" value="SWiSH/index.swf" />
<param name="quality" value="high" />
<param name="LOOP" value="false" />
<embed src="SWiSH/index.swf" width="840" height="630"
loop="false" quality="high" pluginspage="
http://www.macromedia.com/go/getflashplayer"
type="application/x-shockwave-flash"></embed>
</object>
</noscript>
Thanks for any help anyone can give,
TBC

Did you upload the "Scripts" folder that DW places in your
local site?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"ZAPphoto" <[email protected]> wrote in
message
news:eh8fos$kpi$[email protected]..
>
I have set up a flash video, and while it works in
DreamWeaver
> 8 (I
> use an XP Pro platform), it does not on the Internet.
There are three
> files
> that appear in a separate folder:
>
> index.sbk
> index.swf
> index.swi
>
> and all are uploaded to the Internet.
>
> The code on my shtml page reads (the mixed caps and
lower case are not an
> issue, as everything else works on our site):
>
> <script type="text/javascript">
> AC_FL_RunContent(
> 'codebase','
http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#
>
version=7,0,19,0','width','840','height','630','title','Welcome
>
Flash','src','SWiSH/index','loop','false','quality','high','pluginspage','http:/
>
/www.macromedia.com/go/getflashplayer','movie','SWiSH/index' );
//end AC
> code
> </script>
> <noscript>
> <object
classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000"
> codebase="
http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#ve
> rsion=7,0,19,0" width="840" height="630" title="Welcome
Flash">
> <param name="movie" value="SWiSH/index.swf" />
> <param name="quality" value="high" />
> <param name="LOOP" value="false" />
> <embed src="SWiSH/index.swf" width="840" height="630"
> loop="false"
> quality="high" pluginspage="
http://www.macromedia.com/go/getflashplayer"
> type="application/x-shockwave-flash"></embed>
> </object>
> </noscript>
>
> Thanks for any help anyone can give,
>
> TBC
>
>

Flash video not working? Embed wrong?

I was told the following Flash videos are not workin on IE on
pc. I am
wondering what I did wrong with embedding them?
http://www.agilitygraphics.com/clients/cs/pages/destination.html
http://www.agilitygraphics.com/clients/cs/pages/history.html
http://www.agilitygraphics.com/clients/cs/pages/location.html
Thank you for any help!
B

Works for me...
Are you doing player detection? Which player are you
targeting?
Maybe those people did not have the correct player...
This is what I do:
1. I downloaded the player 7,8 and 9 player installers, the
player
uninstaller and always have them handy
2. Uninstall the player and visit the site to see it my no
player
installer detection is working and what happens
3. Install like the player 7 and see what happens
and so on...
this way you cna debug your player detection and give the
users the
option to either install flash or upgrade but never get a
blank video box
Brian wrote:
> I was told the following Flash videos are not workin on
IE on pc. I am
> wondering what I did wrong with embedding them?
>
>
http://www.agilitygraphics.com/clients/cs/pages/destination.html
>
http://www.agilitygraphics.com/clients/cs/pages/history.html
>
http://www.agilitygraphics.com/clients/cs/pages/location.html
>
> Thank you for any help!
> B

Fullscreen flash video not working in Gnome3

Hi!
I installed Gnome3 (with gnome-shell) and have one problem.
Fullscreen flash video (youtube, etc.) not working. When i click on fullscreen button, the video just freezes.
In Gnome2 or KDE4 I not have this problem.
Kernel version: 2.6.38.5-1
Nvidia driver version: 270.41.06-1
Flash version: 10.2.159.1-2 (mms.cfg: EnableLinuxHWVideoDecode=1)
Please help.

Total wrote:
Hi!
I installed Gnome3 (with gnome-shell) and have one problem.
Fullscreen flash video (youtube, etc.) not working. When i click on fullscreen button, the video just freezes.
In Gnome2 or KDE4 I not have this problem.
Kernel version: 2.6.38.5-1
Nvidia driver version: 270.41.06-1
Flash version: 10.2.159.1-2 (mms.cfg: EnableLinuxHWVideoDecode=1)
Please help.
Try adding
OverrideGPUValidation = 1
to /etc/adobe/mms.cfg
That still seems to work for me. https://bbs.archlinux.org/viewtopic.php?id=117875

Flash videos not working on sf.tv

SF is the Swiss national TV channel. Their website has a main news portal and a video portal (http://www.videoportal.sf.tv). My problem is with the news portal.
They often embed flash videos into their news, but none of them will show up and play. I just get a blank space where the video should be. I'm mainly using Firefox, tried it by disabling add-ons like Adblock Plus or Noscript, without success. Same with Chrome and Internet Explorer. I played around with the Flash options, even used Adobe's deinstaller and reinstalled Flash, checked my firewall and antivirus software, my .hosts file, but the videos on the news portal still won't work.
Other websites like Youtube work without problem, as do the videos on SF's video portal.
My system is WinXP SP3 with an Intel onboard graphics card. I have no clue if the problem is on my side or if it's the website. Any suggestions how I could solve it?

jklwcnflkasdjfnasjkf wrote:
The website isn't on the block list, I even added it as exception. I have Downthemall installed since ages, long before the problem with sf.tv started. As for Avast I already tried with deactivating all the functions, to no luck.
The reason I asked you whether you've been using DownloadThemAll for a while is because it resets certain network values in Firefox. You need to reset those back to their defaults if they've changed. To check, do the following:
In the location bar where you normally type in a URL, type about:config and hit Enter. (If you see a warning message, click "OK, I'll promise I'll be careful" to proceed)
In the filter at the top, copy/paste the following: network.http.max-connections
If the entry is in bold type, right click it and choose Reset from the menu.
Repeat the same steps for the following: network.http.max-connections-per-server | network.http.max-persistent-connections-per-proxy | network.http.max-persistent-connections-per-server
Close about:config and then try and play your videos again.
If the problem persists, do the following:
Press CTRL+SHIFT+DEL to open the Clear History manager. (See screenshot)
Checkmark all the boxes you see in the screenshot.
Change the option to "Everything" in the dropdown menu at the top.
Click the Clear Now button. It might take a minute or two to delete everything, so don't worry if nothing appears to be happening.
I should warn you that running this utility will delete site preferences and active logins. If you have a cookie manager installed - I use CookieMonster - all your cookie settings will be deleted, but the cookies themselves will remain in place. This means that on a site where you expected a cookie to be enabled, it will appear to be disabled the next time you go there. You simply have to re-enable it in your cookie manager. The data within the cookie will remain the same.
Running this utility can resolve many issues though and yours might be one of them.

Flash videos not working, show green screen

In all of my browsers (firefox latest version, chrome latest version, IE 8) flash videos on sites like Youtube and others will play audio but will only display a green screen (no video). I have updated flash "successfully" several times.
Also, I have tried uninstalling flash player several times but it never actually uninstalls, despite saying that the uninstall was successful. I have tried uninstalling on a clean reboot, with no programs running. What do I do?
EDIT: More info: On the adobe.com/software/flash/about page the flash video plays and the little box says "You have version 10,1,82,76 installed" so flash is definitely still installed. I also tried rebooting multiple times between uninstalls.

Hi, glad you solved your own problem On the Uninstalling, removing it from add/remove or control panel/programs & features doesn't do it. In your case, glad it didn't since you ran the test, and Flash Player is working fine now(without the h.a)
If you ever need to Uninstall Flash Player, be sure to use the latest Uninstaller from Adobe since it changes each time a Flash Player Update is released.
http://kb2.adobe.com/cps/141/tn_14157.html
You can always find the latest Uninstaller just be looking at a few threads here on the forum.
Thanks,
eidnolb

Flash Video Not Working in LMS

Hi,
When I preview my project, the flash video I inserted into the widget plays fine. When I publish the project onto our Learning Management System server, the video plays fine.
However, when I go into the LMS course, the video does not play, while the audio does.
Any thoughts?
Thanks,
rtn507

Firefox tells me -
AC_FL_RunContent is not defined
[Break on this error] AC_FL_RunContent(
'codebase','
http://download.macromedia.com/pub/shockwave/cabs/...
That function is defined here -
<script src="../Scripts/AC_RunActiveContent.js"
type="text/javascript"></script>
When I browse here -
http://www.zabell.se/Scripts/AC_RunActiveContent.js
I get a file not found.
'nuff said?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"KajanZ" <[email protected]> wrote in
message
news:gbgtrp$1eg$[email protected]..
>I have tried to insert a flash video film with Media/
Flash Video without
>any
> good result. The adress
http://www.zabell.se/video/video.html
. All files
> are
> on the server but I cant see the video.
> I have Vista, Dreamweaver Cs 3, Maybe thats the problem?
> Can I please have some advise whats wrong, Regard from
Sweden/KajanZ
>

Flash video not working after upload

Hi I have a simple flash site using MX8 pro with a small
imported medium res video clip. Works fine locally but not via the
site. I have confirmed its not a cache issue because I can see test
alterations to text colour. the content is all in the same
directory as per local content? Please advise! regards Mike

I have fixed this now, the reason was my host service
provider had to enable .flv extension in MIME settings on Windows
Server 2003; you would have expected that with all the automatic
updates pushed by Microsoft that this would have been sorted. I
guess it gives internet hosting service providers the choice to
allow steaming or not, the only problem is that many service
providers might not be aware of the issue. I got the answer from an
adobe tech note via google.

Flash Video not working; only get audio

i.e. I go to NFL website. click on a video clip. Commercial runs fine. When the clip starts, black screen, only audio.
This started only recently. I checked YouTube, video runs fine there.
I get the same problem, either IE 10 or Chrome (latest version)
Samsung laptop, Windows 7 Home SP1
followed some tips on Adobe website. Deleted some Cache folders, etc, and still nothing.
Any assistance is greatly appreciated.
Thanks,
Damon

I forgot to mention that I also tried to disable the 'hardware accelleration' in the settings of the player. Again, this did not have the desired result.

Buffer time in flash video not working

I am trying to give some videos in my site at least a 7 to 10
second buffer in order to prevent pauses. I set the time (7 or 10)
for the buffer Time in the Parameters box (it is also set to
autoPlay (yes) however, when the page is pulled up on the web, the
video starts almost immediately. What am I missing? (I don't have
an instance name on the video, would that matter?)

first, you need to end that onEnterFrame function, because as
of now, it is executing the function at the rate of you fps.. so
start with
_root.onEnterFrame = funciton(){
_root.attachMovie("movie", "neoMovie", 1000);
neoMovie._x=200;
neoMovie._y=200;
delete this.onEnterFrame;
i'm not 100% positive that will resolve this, as i've never
tried loading a flv into a movie clip that is attached to the stage
using the attachMovie method.. but that is a start..
p.s. make sure your linkage id is correct.

Embedded Youtube videos not working on Chrome 23 / Flash player 11.5.31.2

For the past couple of weeks, I've not been able to play any Youtube videos that appear as embedded videos on other websites. The small player appears with the still frame from the video and all the controls, but on pressing play, the video goes blank and won't play (the slider stays stuck at 0:00). Nor does the full screen button work - the player just stays where it is within the third party website. This problem has occurred across more than one website, but all sites still work in Internet Explorer.
The main Youtube site is still working.
I have tried all relevant steps here, to no avail (except increasing memory for a particular website, since not just one website is affected):
http://helpx.adobe.com/flash-player/kb/flash-player-games-video-or.html
Details:
Windows 7 Home Premium 32-bit
Google Chrome 23.0.1271.64 m
Flash Player 11,5,31,2
Any suggestions please?
John

Thank your for your reply, Chris.
I installed the newest version of Chrome, and the videos I have
embedded on my blog are now working.
Regards,
Frank
2012/11/30, Chris Campbell <[email protected]>:
Chris Campbell http://forums.adobe.com/people/chris.campbell created the
discussion
"Re: Embedded Youtube videos not working on Chrome 23 / Flash player
11.5.31.2"
To view the discussion, visit:
http://forums.adobe.com/message/4885375#4885375

Adobe Flash Player not working. Installen latest version. Get the following: "This website would like to run the following addon: Adobe Flash Player from Adobe System Incorporated." Then asking me to allow it for current or all websites. It doesn´t matter

Adobe Flash Player not working. Installen latest version. Get the following: "This website would like to run the following addon: Adobe Flash Player from Adobe System Incorporated." Then asking me to allow it for current or all websites. It doesn´t matter how i do this. The pop-up question returns EVERY time. What do i do to solve this issue???

To give you any useful advice, I'm going to need to know more about your computer and browser:
https://forums.adobe.com/message/5249945#5249945

Flash video not working on website

Similar Messages

Maybe you are looking for