Flash will not in stall after closing IE!

I've read through all the suggestions, reset IE, made sure ActiveX Filtering is off etc... I've 'downloaded' Flash, I've 'run' Flash to install and still get the box "close IE". IE is not open! I click retry and the box continues to pop up and I cannot install Flash!
I've been reading discussions and retrying for the past 2 days. This is rediculous!
HELP!

Hello,
Welcome to Adobe Forums.
I apologize for the inconvenience, make sure once you download the Flash Player installer, close Internet Explorer.
Note : Launch Task Manager and check in processes Tab for "iexplore.exe" process (Kill the process if it is running)
Thanks,
Vikram

Similar Messages

Aperture 3 will not load again after closing it without repair of database or permissions

I have Max OS X 10.8.5 on a Late 2009 iMac with 12 gb of RAM.
Repeatedly when I try to reopen Aperture 3 after closing it (and the prior close is a normal close without issue), I find aperture never loads. The icon in the tray says it's running but the window never opens.
The only thing I can do is Force Quit. Then if I'm lucky, I can open it again using the troubleshooting key combination and can select to repair database or repair permissions, and it will load.
This basically makes me never want to close it but sometimes it would be nice to do so. I'm also very worried about my library getting hammered and unusable eventually.
I have sent the reports to Apple but I'm not sure if anything will come of that.
The library size is 442 gb.
Any advice is appreciated.
Andrea

Hi léonie,
I have version 3.4.5 of Aperture 3.
My library is stored on an external hard drive. A LaCie 1TB drive.
I do not share the library between multiple users. I have occasionally opened the library in iPhoto since I upgraded both Aperture and iPhoto. Often I open in iPhoto because iPhoto doesn't seem to have the same problem opening the library that Aperture continues to have. So if Aperture is closed and I need a quick print out or copy of a photo that is in the Aperture library, I can reliably open it in iPhoto to get that accomplished quickly.
I cannot pinpoint an event that led to the trouble. It's been going on for many months now, and I've reached the conclusion that no combination of repairs of the library are helping and I should reach out to you all.
Thank you.

I have a Mac Pro. Tried to use it today and the Adobe Flash will not reinstall. After 3 years it will not take password.

My Mac Pro is three years old. Today when trying to use the adobe flash it is not working. after trying to reinstall the program, there is no way it will take pass word to reinstall this program. Can anyone give an idea as to how this can be repaired.

Assuming you mean you need to rest the administrative PW then:
Forgot Mac Password? How to Reset Your Mac Password (with or without CD)
Change the Admin Password with Mac OS X Single User Mode
Reset mac mini admin password: Apple Support Communities

I have a looped music sound that will not stop playing after closing the tab.

I played a lottery game online with background music. When I closed the tab and left the site the music keeps playing every time I open Firefox. It appears to be looped and I cannot stop it.

Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

ITunes 10.5.2 on Vista - will not re-open after closing

Since upgrading iTunes to the latest version it does not work properly. It starts up ok when I start the PC but if i then close iTunes then I cannot re-open it. Nothing happens when I click the icon. If I look in Task Manager then iTunes shows as a process but it is not using any CPU.
Any advice?

I have resolved the problem by a completely uninstalling all Apple products using Revo Uninstaller Pro and reinstalling iTunes.
I got the instructions from : http://www.howtogeek.com/howto/23959/completely-remove-itunes-and-other-apple-so ftware-from-a-windows-computer/
Revo does more than standard uninstall and clears the registry.
Revo was availale on 30 Days Trial and CCleaner is free.
Downloads
http://www.revouninstallerpro.com/
http://www.filehippo.com/download_ccleaner

Since I installed the new version 17.0.1, third party cookies will not stay selected after I close the browser...

Simply -- third party cookies will not stay selected after closing the browser and I have to select it for each time to use certain cookies from websites...

You may need to create an allow exception to keep specific cookies.
*http://kb.mozillazine.org/Cookies
In case you are using "Clear history when Firefox closes":
*do not clear the "Cookies" and the "Site Preferences"
*Tools > Options > Privacy: History: [X] Clear history when Firefox closes > Settings
*https://support.mozilla.org/kb/Clear+Recent+History
Note that clearing "Site Preferences" clears all exceptions for cookies, images, pop-up windows, software installation, and passwords.

Flash will not publish + FLV question

Hello,
I am currently building a game in Flash CS4, but am stuck due to a Flash problem. I have searched the forums for a sollution, but have yet to find one.
The Problem:
Adobe Flash will not export, or publish my .FLA file, nor will it create a .SWF at the chosen destination under the publish settings. Whenever I try to export/publish my .FLA, the export/publish pop-up window opens, and the progress bar runs all the way through. Once that is done, the window which normally appears immediately afterwards, in order to test the flash, does not appear.
Furthermore, Flash seems to have deleted the .SWF, and any other files I wish to publish the moment the publish/export process is completed.
The strange thing about this problem is that I may be lucky and have Flash actually export and publish correctly on its first go. However, when I try again, it won’t publish/export until I restart flash.
This problem happened on three separate windows machines (Vista and 7) under both Flash CS4 and CS5.
Note:
I have discovered that this problem may be related to the many embedded FLV video clips I have created for the game’s character animations (6+ characters with 30 very short animations each).
These animations were rendered in a 3D CG software, which were then edited in Adobe After Effects, and exported as .FLVs for use in Flash.
Oddly enough, once I’ve deleted all the embedded FLV clips from the library, Flash will once again publish and export. This is not an acceptable solution to my problem, however. I already searched for any corrupted FLV files, but could not find any.
My questions are:
1. What can I do to make Flash publish/export once again, while having my embedded .FLV clips within the library? Is there something I am over-looking, or any settings I must change in Flash?
2. Which settings (in Adobe After Effects) are best to export .FLVs for use in flash?
3. If I cannot use FLVs, what other options do I have, in order to use my CG animations in Flash? I tried PNG sequences, but Flash complains about low memory, and crashes (FLVs were working great up until now).
Any help would be greatly appreciated. Thank you in advance.

I've also experienced problems with the Publish process dropping out and failing to complete - no error messages in the Output pane or Compiler errors, just a total hang of the Publish status bar (and no published files...).
I can't say I've pinpointed the exact cause of this, but it may be related to having all objects on the Stage locked (possibly when they are not placed in the main canvas area).
Adding a new layer and creating a new object seems to help. If the publish process (including TestScene) has stalled, restart Flash and reload the movie...
Hope that helps! It's kinda scary watching that Publish bar disappear into nothingness when you've got literally hours/minutes/seconds left to get the thing built and running :-)

Why ill the flash player not intialize even after disabling firewall and antivisurs software

Why will the flash player not intialize even after disabling firewall and anitvirus software?

Windows XP and internet exployer? I can get the flash player to begin the
download but stops at about 50% initalization
Greenleaf Compaction, Inc.
142 W. Main
P.O. Box 265
Hopkins, MI 49328
Phone: 1-877-552-9369
Fax: (269) 793-7298
New email address: [removed]

Flash will not install

I have been trying to install adobe flash. First instructions were to uninstall and previous versions. I did that and now Flash will not install. It says that gplay is interfering and can not down load. I dont even know what gplay is, were do I find it, what does it do, and how do I make it go away to get Flash.
I have been working on this for a month. I downloaded Chrome and that is working fine because it has Flash with it, but I deleted flash from my computer and AOL is my internet provider and I cant play videos and such from my mail.
Help, I am so frustrated.
Cindy

Hi,
Which operating system is your computer running on?
If you are using Windows, got to the Task Manager and click on the Processes tab.
Then click on "Show Processes from all users".
In the list of processes, look for "gplay.exe". Select it and click on End Process.
Try downloading and installing Flash Player after that.

Camera flash will not shut off

My camera flash will not shut off. Have rebooted and totally restored as new phone. Stays on even when phone is powered off.
May be coincidental, but it did not start until after 7.1.1 update.

Hi,
Try a Reset of the Phone... You will Not Lose Any Data...
Turn the Phone Off...
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
The Apple logo will Appear and then Disappear...
Usually takes about 10 - 15 Seconds...
Turn the Phone On...
If that does not help... See Here:
Backing up, Updating and Restoring
http://support.apple.com/kb/HT1414

Light on iphone4 flash will not turn off even when phone is powered down, now it is overheated and says not usable till cooled, but it won't cool. I'm afraid it will start a fire.

light on iphone4 flash will not turn off even when phone is powered down, now it is overheated and says not usable till cooled, but it won't cool. I'm afraid it will start a fire. Aside from breaking it, putting in in a metal pail in the yard, or putting it in a bucket of water, what can be done to keep it from setting a fire. It is so hot it burns my skin if i touch it, so bright, it hurts to look at, so hot there is now a warning that it is not usable till it cools down, but there is no way to cool it down.

more info, this happened after update to 7.0.2, and also wifi will no longer turn on since update. I took it in to apple store, it had one month left on warrenty, and they said that it would have had to get wet for this to happen. I thought that maybe it got wet through my jeans pocket in the rain or something so I didn't pursue it. Now of course, it is out of warranty by a month.

I have an iPhone 4, the flash will not turn off. What can i do? Flash is already off on camera and i deleted the flashligth app.

I have an iPhone 4, the flash will not turn off. What can i do? Flash is already off on camera and i deleted the flashligth app.

Try Hard Reset -> Hold down these two buttons at the same time [Sleep/Wake & Home] the moment you see the Apple Logo 'release those buttons' allow device to reset
If still no resolution -
Restore
[back up information either via iTunes or iCloud if no recent one has been done]
Erase All Content an Settings - FIRST Set up As New - Test Camera Flash
Works? Great! - restore back up
[NOTE - if the flash does not respond again after restoring back up then sorry will have to Erase All Content and Settings Again and then the best part 'Set up As New and manually enter data/information']
If the first time done and after setting up as new and still not resolved - then Id suggest call AppleCare Support or set an appointment up with an Apple Retail Store
Best of luck

YOU SHOULD BE ASHAMED OF YOURSELVES - FLASH WILL NOT INSTALL UNDER ANY CIRCUMSTANCES

Does anyone from Adobe support read this forum??? Adobe Flash will NOT install on a Mac. It hangs at either 95% or 97% depending on which download link is followed. IT WILL NOT FINISH THE INSTALL. I have uninstalled and tried SIX installs - back to back - and it stalls. IT WILL NOT COMPLETE THE INSTALL. You have been aware of this problem for months and have not fixed the installer. I BOUGHT A MAC, NOT ADOBE FLASH, but I am forced to use it. SO FIX IT!!!!!!

Does anyone from Adobe support read this forum??? Adobe Flash will NOT install on a Mac. It hangs at either 95% or 97% depending on which download link is followed. IT WILL NOT FINISH THE INSTALL. I have uninstalled and tried SIX installs - back to back - and it stalls. IT WILL NOT COMPLETE THE INSTALL. You have been aware of this problem for months and have not fixed the installer. I BOUGHT A MAC, NOT ADOBE FLASH, but I am forced to use it. SO FIX IT!!!!!!

My iPod Touvh 4th Generation won't turn on. It will not charge even after I used a few chargers and will not connect to a computer. The Home button is broken and I don't know if the Lock/Sleep button is now broken or stuck as well. What should I do?

My iPod Touvh 4th Generation won't turn on. It will not charge even after I used a few chargers and will not connect to a computer. The Home button is broken and I don't know if the Lock/Sleep button is now broken or stuck as well. I believe there may be a problem with the battery or the backlight. I've had my screen replaced once by some stooges. What should I do?

Try:
- iOS: Not responding or does not turn on
When it says place the iPod in recoverymode use one of these programs.
For PC
RecBoot: Easy Way to Put iPhone into Recovery Mode
If necessary:
Download QTMLClient.dll & iTunesMobileDevice.dll for RecBoot
and
RecBoot tip
For MAC or PC
The Firmware Umbrella - TinyUmbrella
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Macbook will not boot up after running Software Update

My MacBook will not boot up after running Software Update (Security update + Java?) earlier today. I have only the gray start up screen + Apple logo + gear wheel constantly rotating. I have tried restarts several times and tried to start up from my original system DVD - this makes no difference.
I called Apple support, tried resetting the power and PRAM - still no difference. He had no knowledge of other problems reported; although I note recent post may have same issue.
I cannot get an appointment at my Apple Store before Monday.
Any suggestions?

Still no success. When I hold down the option key when powering up I get the hard disk icon plus arrowhead (only). When clicking the arrowhead it goes to the gray screen + apple logo+ rotating gearwheel.
This happens both with DVD in slot and without DVD. the DVD image is not coming up on screen. When I start up without DVD the hard disk icon appears promptly. When I start with DVD in the DVD is spinning for a short period before the hard disk icon appears. On clicking the arrowhead to hard disk icon the DVD spins again for a while then stops. Apart from the DVD spinning, both situations result in gray screen + apple logo+ rotating gearwheel.

Flash will not in stall after closing IE!

Similar Messages

Maybe you are looking for