Flash Will Not Line Up With Surrounding Graphics In Dreamweaver

Hello All:
I have been trying to get my Flash .swf file to line up with
the surrounding graphics in my page. I used the same sliced image
in the page and it lines up and for some reason when I put that
same slice into Flash, it becomes slightly skewed by a few pixels.
Here is what the page/problem looks like:
http://www.shannawise.com/images/FlashProb.jpg
Any suggestions?
NOTE: I'm using Dreamweaver MX

Tyring to get pixel perfect mixing Flash & others always
causes headaches. A
better approach may be to place you flash reference in a
layer that sits
over a background graphic
Paul Whitham
Certified Dreamweaver MX2004 Professional
Adobe Community Expert - Dreamweaver
Valleybiz Internet Design
www.valleybiz.net
"swnova22" <[email protected]> wrote in
message
news:eiqhaj$qcr$[email protected]..
> Hello All:
>
> I have been trying to get my Flash .swf file to line up
with the
> surrounding
> graphics in my page. I used the same sliced image in the
page and it
> lines up
> and for some reason when I put that same slice into
Flash, it becomes
> slightly
> skewed by a few pixels.
>
> Here is what the page/problem looks like:
>
http://www.shannawise.com/images/FlashProb.jpg
>
> Any suggestions?
> NOTE: I'm using Dreamweaver MX
>

Similar Messages

  • Monitor will not turn on with new graphics card

    I have a h8-1070t and added a Powercolor 7870 myst graphics card, but the monitor, keyboard, and mouse will not power on.  I tried this same card in my friends pc, works fine. I have a 600w powersupply and running windows 7 and currently  using an old  Saphire 1950 graphics card; works fine.
    Could there be a problem with my power supply?or windows 7?
    thanks for any advice

    I am having this same issue with a powercolor hd7850.  I have an HPE H8-1214.  Any ideas on this will definitely help.  card works great in my other comp but I am wanting to use it in this computer.

  • When I click install flash I get a blank window with this comment at the top 1 item Zero kb available and flash will not install This is my first time on this forum what do I do next please

    When I click install flash I get a blank window with this comment at the top 1 item Zero kb available and flash will not install 

    https://forums.adobe.com/thread/1195540

  • Canon 580EX Flash will not fire. Being shot on a Canon 5D Mark III.

    The light  does not start out green and stays red on the 580EX Flash. It doesn't even go into a sleep mode when not activated for a length of time.  Fresh batteries does not make a difference.  It will allow me to change settings but it won't fire. The infra-red displays it's test light but the flash will not discharge even when it demands it.  It is not on slave or wireless settings.  Nothing makes the flash go off, even the test flash.

    First, the red light on the flash indicates it's ready to fire. It goes off when the flash is recycling.
    That "pilot" light also is a test button... Turn the flash on and as soon as it lights up, press it. If the flash fires, then it's likely the flash is fine.
    Next, check in your camera menu... is Flash Firing (which might be in a Flash Setup group on a later camera model) set to "enabled"? Silly little thing, I know... but it happens. Don't ask me how I know! 
    Also check the flash is fully mounted in the hot shoe. The locking lever will not go all the way to the latched position, if the flash isn't fully seated in the shoe. The locking lever actuates a small pin on the flash's foot, that fits into a corresponding hole in the hot shoe, both to insure the flash is fully in place and to secure it there.
    If all the above checks out okay, another possibility is the camera's exposure mode. Now, personally I don't use them so can't say for certain, but assuming your camera even has them, maybe some of the more automated "scene modes" such as the "running man" for sports, etc. prevent the flash from firing.
    Again, I'm not certain how the flash will perform in those modes... But you should use Av, Tv, P or M to test the flash anyway. In the auto exposure modes Av, Tv and P, the flash will fire at reduced output, as FILL light. In the manual M mode, it will fire FULL, as the main light source. Often when firing as fill with reduced output the red light of the flash doesn't go out with a single shot... I often can get 2 or 3 pops out of it before the light goes out and the flash goes into recycle mode for a few seconds.
    Is it possible the flash actually is firing, but as fill so it's not a very strong output and it doen't need to go into recycle mode? You might not see the flash, if it's at reduced power and you have your eye to the viewfinder (which blacks out momentarily during the short duration of the exposure). Usually you hear the flash "pop", but if shooting somewhere with a lot of background noise, might not even be able to hear that.  
    Finally, are you trying to use the flash wirelessly? If so, then there are a number of possibilities. First, the flash needs to be set as "slave". Next, the camera's on-board flash needs to be popped up to act as the controller. Also, the flash and camera need to be set to a matching channel or group. Also, the flash may need to be rotated so that the red pane on the front is facing the camera. Plus wireless flash control is optical, so is "line-of-sight" only. And it's reach is rather limited.
    Some of these suggestions may have already occured to you. If so, great! I don't know your level of experience with the flash or what camera you are using, so am just throwing out possibilities that occur to me. I hope this helps!
    Alan Myers
    San Jose, Calif., USA
    "Walk softly and carry a big lens."
    GEAR: 5DII, 7D(x2), 50D(x3), some other cameras, various lenses & accessories
    FLICKR & PRINTROOM 

  • Verizon Media Manager will not start automatically with Windows, even though it is set to do so.

    Verizon Media Manager will not start automatically with Windows, even though it is set to do so.  This started with the latest update.  I see that the desktop icon for Media Manager now has a security shield on it, and it requires UAC confirmation when you start it, which I don't remember the old version doing.
    One thing I noticed, msconfig.exe shows that "C:\Program Files\Verizon\McciTrayApp.exe" is set to start at Windows startup, but the desktop icon used to start Media Manager manually has a target of ""C:\Program Files\Verizon\Verizon Media Manager\Release\Verizon Media Manager.exe" Verizon Media Manager".
    I don't remember what the previous version was, but this one is 9.4.86.  It asked me if I wanted to update it a few days ago, and I said yes.
    I am running Windows 7 Home Premium.
    Solved!
    Go to Solution.

    Try setting the startup option to off and then to on again. It looks to be pointing to a wrong location.
    Attached is a partial screen shot of my msconfig setting.
    Attachments:
    media manager startup cmd line.jpg ‏18 KB

  • Adobe Flash will not Run

    I have gone through all the forums and installed and uninstalled flash 3 times.  I have gone through the active-x control and still now luck...it wont run although its showing as a successful install.  I am running Windows 7 Home Edition with IE 9 version 9.0.8112, 64 bit operating system with 4.00 RAM.
    I need help...this is frustrating.  I have tried logging onto my son and wife user name on this computer and still flash will not run.
    Thanks in advance for the help.

    See if any of this helps:
    http://forums.adobe.com/thread/885448
    http://forums.adobe.com/thread/867968

  • Flash will not install

    I have been trying to install adobe flash. First instructions were to uninstall and previous versions. I did that and now Flash will not install. It says that gplay is interfering and can not down load. I dont even know what gplay is, were do I find it, what does it do, and how do I make it go away to get Flash.
    I have been working on this for a month. I downloaded Chrome and that is working fine because it has Flash with it, but I deleted flash from my computer and AOL is my internet provider and I cant play videos and such from my mail.
    Help, I am so frustrated.
    Cindy

    Hi,
    Which operating system is your computer running on?
    If you are using Windows, got to the Task Manager and click on the Processes tab.
    Then click on "Show Processes from all users".
    In the list of processes, look for "gplay.exe". Select it and click on End Process.
    Try downloading and installing Flash Player after that.

  • Flash will not install - Black Box on step 2

    Running Windows 7  and IE11.   New version of Flash will not install.  I get a black box on step 2 and it doesn't continue.
    I uninstall old flash and rebooted.  Same error.
    Loaded Flash from file I downloaded  Same Error.
    Ran with Admin rights.  Same Error.

    Try the offline installers:
    Internet Explorer:
    http://fpdownload.macromedia.com/pub/flashplayer/latest/help/install_flash_player_ax.exe
    Firefox and other NPAPI browsers:
    http://fpdownload.macromedia.com/pub/flashplayer/latest/help/install_flash_player.exe

  • Flash will not publish + FLV question

    Hello,
    I am currently building a game in Flash CS4, but am stuck due to a Flash problem. I have searched the forums for a sollution, but have yet to find one.
    The Problem:
    Adobe Flash will not export, or publish my .FLA file, nor will it create a .SWF at the chosen destination under the publish settings. Whenever I try to export/publish my .FLA, the export/publish pop-up window opens, and the progress bar runs all the way through. Once that is done, the window which normally appears immediately afterwards, in order to test the flash, does not appear.
    Furthermore, Flash seems to have deleted the .SWF, and any other files I wish to publish the moment the publish/export process is completed.
    The strange thing about this problem is that I may be lucky and have Flash actually export and publish correctly on its first go. However, when I try again, it won’t publish/export until I restart flash.
    This problem happened on three separate windows machines (Vista and 7) under both Flash CS4 and CS5.
    Note:
    I have discovered that this problem may be related to the many embedded FLV video clips I have created for the game’s character animations (6+ characters with 30 very short animations each).
    These animations were rendered in a 3D CG software, which were then edited in Adobe After Effects, and exported as .FLVs for use in Flash.
    Oddly enough, once I’ve deleted all the embedded FLV clips from the library, Flash will once again publish and export. This is not an acceptable solution to my problem, however. I already searched for any corrupted FLV files, but could not find any.
    My questions are:
    1. What can I do to make Flash publish/export once again, while having my embedded .FLV clips within the library? Is there something I am over-looking, or any settings I must change in Flash?
    2. Which settings (in Adobe After Effects) are best to export .FLVs for use in flash?
    3. If I cannot use FLVs, what other options do I have, in order to use my CG animations in Flash? I tried PNG sequences, but Flash complains about low memory, and crashes (FLVs were working great up until now).
    Any help would be greatly appreciated. Thank you in advance.

    I've also experienced problems with the Publish process dropping out and failing to complete - no error messages in the Output pane or Compiler errors, just a total hang of the Publish status bar (and no published files...).
    I can't say I've pinpointed the exact cause of this, but it may be related to having all objects on the Stage locked (possibly when they are not placed in the main canvas area).
    Adding a new layer and creating a new object seems to help.  If the publish process (including TestScene) has stalled, restart Flash and reload the movie...
    Hope that helps!  It's kinda scary watching that Publish bar disappear into nothingness when you've got literally hours/minutes/seconds left to get the thing built and running :-)

  • Flash Will Not Open (but the rest of CS4 will)

    Hello all,
    I bought CS4 Design Premium back in October 2008 with my new MacBook Pro.  While I have been using Illustrator, InDesign, and Photoshop for some time, I am just now wanting to get into Flash.
    The problem is that Flash will not open.  I get the entry window that asks me to choose what type of Flash file I would like to start, but no matter what I choose the windows shut down and I get a crash report (that is quite long).
    Can someone please shed some light on why this is happening?
    Thank you all in advance for your help with this!
    Peace,
    Jason

    Why not post this in the iMove forum area?
    http://discussions.apple.com/category.jspa?categoryID=141

  • Flash will not open .otf font

    I just installed Myriad Pro and flash will not open the font.
    When I go to my fonts folder and double click on the file it says
    that its not a valid file and cannot open a .otf. Ive tried to
    rename the file to a .tff but it doesnt work.
    Please help this is really aggrevating.
    Thanks!

    Some fonts simply do not work in Flash. I tried to search the
    forum to show you other posts of users who have had problems with
    Myriad Pro but this seems to be one of those days that the Adobe
    forum decides to be finicky. I thinkg what jedaniel was trying to
    say was to see if you can find a true type equivalent of Myriad to
    see if that will work. The extension would then be "ttf".
    Are you on a Mac or PC? If you have one at your disposal, you
    may try using a font conversion app.

  • My garage band will not work properly with new lion upgrade..HELP

    My garage band will not work properly with new lion upgrade..HELP
    I have tried to open old session i have done in garage band and many of the effects and instruments I have used will not show up. The system seems to have a bug.

    If the graphical user interface looks broken, that is quite often a problem of corrupted user preferences - have you tried to remove the preferences file, as described in the FAQ
    http://www.bulletsandbones.com/GB/FAQPages/OddBallProbs.html
    Here is again the short version:
    Quit GarageBand, if it is running.
    Open your User Library in the Finder. It is hidden in MacOS X Lion, so use the Finder's "Go" menu:
    Finder > GO    hold down the "Options" key, until the library appears in the menu, select it.
    In the window that opens, open the folder "Preferences" and remove the file:com.apple.garageband.plist and com.apple.garageband.plist.lockfile
    Then try again to run GarageBand and download the loops.
    The preferences file stores all you user settings that you set using the "Preferences" panel in GarageBand, also the layout of the GarageBand window and the location of your recent projects. You will have to enter these settings again after removing the file.
    Regards
    Léonie

  • I have an iPhone 4, the flash will not turn off.  What can i do?  Flash is already off on camera and i deleted the flashligth app.

    I have an iPhone 4, the flash will not turn off.  What can i do?  Flash is already off on camera and i deleted the flashligth app.

    Try Hard Reset -> Hold down these two buttons at the same time [Sleep/Wake & Home] the moment you see the Apple Logo 'release those buttons' allow device to reset
    If still no resolution -
    Restore
    [back up information either via iTunes or iCloud if no recent one has been done]
    Erase All Content an Settings - FIRST Set up As New - Test Camera Flash
    Works? Great! - restore back up
    [NOTE - if the flash does not respond again after restoring back up then sorry will have to Erase All Content and Settings Again and then the best part 'Set up As New and manually enter data/information']
    If the first time done and after setting up as new and still not resolved - then Id suggest call AppleCare Support or set an appointment up with an Apple Retail Store
    Best of luck

  • HT4528 My apps store will not go online with verizon network, but on wifi it works. I am on an iphone 4, verizon.  I tried to do a complete, backup and restore on the phone 1 day before i noticed this problem,  The backup finished the RESTORE would fail c

    My apps store will not go online with verizon network, but on wifi it works. I am on an iphone 4, verizon.  I tried to do a complete, backup and restore on the phone 1 day before i noticed this problem,  The backup finished but the RESTORE would fail I had an error, could not access Apple server ( some server name I cant remember).
    I have plenty of space available on the iphone,
    8gb free,
    ios version- 6.1.3 ( 10B329)
    carrier - Verizon 14.0
    Modem Firmware - 3.0.04
    Can someone help.
    I tried doing my backup restore on the same computer as I once did a year ago. and THis time I cant do the restore on the iphone.
    computer osx is 10.5.8
    itunes version 10.
    I do not wish to go to ios 7 at this time.

    Settings > General > Reset > Reset Network Settings.
    Basic troubleshooting is reset, restart, restore (first from backup then as new).  Try each of these in order until the issue is resolved.
    If the issue continues, contact the carrier to troubleshoot the network connectivity issues.

  • New Ipod touch will not sync up with itunes. No error message, it just doesn't sync

    I just bought a new 32 gb ipod touch and it will not sync up with my itunes. I don't get an error message or anything like that, it just does not sync up. HELP!

    Have you Authorised your Computer...
    Open iTunes and from the Menu Bar select Store...
    From the Store menu, choose Authorize This Computer. (In earlier versions of iTunes, access this option from the Advanced menu).
    When prompted, enter your Apple ID and password, then click Authorize.
    See Here for full details...
    About authorization and deauthorization
    Also, see here for Syncing...
    Syncing with iTunes
    http://www.apple.com/support/ipodtouch/syncing/

Maybe you are looking for