Flash will not register in explorer 10 in windows 7

I've followed your instructions to enable active x scripting.
I've uninstalled flash 9 and tried installing the newest version of flash to find the same error...failed to register.

See if anything in here helps: How do I fix Windows permission problems with Flash Player?

Similar Messages

Adobe Flash will not update to a W-2000 system and will not work? Is there a fix? Mozilla has disabled Flash. Do I have to go back to Explore?

Adobe Flash will not update to a W-2000 system and will not work in Firefox? Is there a fix? Mozilla has disabled Flash. Do I have to go back to Explore?

have you tried to install flash
restart imac
go to web site which require flash

MBP will not register with iCloud servers (and most iCloud features + Handoff and Continuity do not work)

Hi all,
I have an extremely strange issue on my rMBP which has not been solved yet despite over 2 hours on the phone with Apple support, and another hour after being put through to a Senior Advisor, and several online chats.
I have a Apple Certified Refurbished Late 2013 Retina Macbook Pro, which has a 2.3Ghz i7, 16GB of RAM, 500 Flash Storage and the NVIDIA discrete graphics. It was purchased in December 2014 on the Apple Store. It is running 10.10.2.
For some reason, my computer WILL NOT register with iCloud. Messages and Facetime both would not work, my iPhone 4S which is capable of text message forwarding would not recognise it and allow me to turn it on. Handoff, Continuity and Instant Hotspot - basically any of the features to do with iCloud or connecting to another device - do not work.
Originally I believed it was just an issue with Messages and Facetime so I reinstalled the OS back to 10.10.1, but that did not solve the problem. All my Messages contacts kept on coming back as 'not registered with iMessage' and I could not turn on SMS Relay either.
I contacted Apple on Wednesday night and ended up talking to several different people, the Senior Advisor was the most helpful - really tried to help me figure out what was wrong, and to fix it - wonderful help, really was. They used screen sharing and were quite confused. They figured out as well that Handoff, Instant Hotspot, and all those other features don't work either. At this point, they made me update to 10.10.2 to see if it was an issue with the update, but to no avail.
Eventually, the SA checked my iCloud account and saw that the computer hadn't even connected to iCloud, and wasn't even showing up as one of my devices, despite the fact that I had signed into iCloud on this computer.
The SA told me that he suspected it must have been something to do with hardware, but didn't know what it could be. He said the only time he had seen this before was on a refurbished laptop when the serial number hadn't been put back on, but my serial number was there, so he said it must have been something to do with Bluetooth or Wifi.
Wireless seems to work completely fine, but there is a strange thing with Bluetooth in which within System report says that the computer is not discoverable or connectable, despite the fact that in the Menu Bar it says it is on and discoverable. It becomes discoverable and connectable once you toggle the switch in System Preferences.
I was planning to book a Genius Bar Appointment as suggested by the SA, but something strange happened today - all of a sudden, some (not all of them) of my iMessages from earlier today came through. Still no working Handoff or Facetime or Continuity, but now I am starting to wonder what is really wrong.
Despite the fact they said it was hardware (especially Bluetooth), what could explain why it (seldom) or will not register with iCloud? Can anybody shed some light on the situation and whether a Genius Bar appointment could help fix it?
Cheers and thanks in advance.

Needed to add some clarification here:
iCloud shows me as signed in, but Calendars are NOT checked
Internet Accounts shows Calendars as syncing

Flash will not install - Black Box on step 2

Running Windows 7 and IE11. New version of Flash will not install. I get a black box on step 2 and it doesn't continue.
I uninstall old flash and rebooted. Same error.
Loaded Flash from file I downloaded Same Error.
Ran with Admin rights. Same Error.

Try the offline installers:
Internet Explorer:
http://fpdownload.macromedia.com/pub/flashplayer/latest/help/install_flash_player_ax.exe
Firefox and other NPAPI browsers:
http://fpdownload.macromedia.com/pub/flashplayer/latest/help/install_flash_player.exe

Hi, when I connect my iPod to my computer it will register but it will not register in iTunes! Any help? Thanks.

Hi, when I connect my iPod to my computer it will register but it will not register in iTunes! Any help? Thanks.

Here:
iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X
or
iOS: Device not recognized in iTunes for Windows

IMac will not register any type of CD

Hello all,
I have owned this iMac for about a year and a half now and this is the first time a problem like this has arisen.
I insert a regular CD (The Beatles for example) and the computer will not register it as having been entered at all (no icon, iTunes does not load). It will also not eject the disk.
When I restart the computer, the disk does come out, but the computer does not read it. What could be causing this? I have tried over ten different CDs- a few of which the computer has registered before.
Thank you in advance for the help!

Hello all,
I have owned this iMac for about a year and a half
now and this is the first time a problem like this
has arisen.
Did the problem just start or has it been an off again on again situation?
I insert a regular CD (The Beatles for example) and
the computer will not register it as having been
entered at all (no icon, iTunes does not load). It
will also not eject the disk.
Sounds like your CDRom has gone south
When I restart the computer, the disk does come out,
I think this is hard coded into OSX - to eject a bad (or what it considers a bad) CD/DVD. I could be wrong but the new Intel iMac have no eject button and to get one out the user must restart the system (and hold down the right mouse button) and the CD/DVD will eject.
but the computer does not read it. What could be
causing this? I have tried over ten different CDs- a
few of which the computer has registered before.
Again, it sounds like your CDRom is no longer working. Do you have an external CDRom you could USB plug in? I use the internal SuperDrive as well as an external USB LaCie Slim DVDRW/CDRW. I let the LaCie do the heavier recording work hoping to save wear/tear on the SuperDrive (and being forced to return the machine to get it fixed/replaced).
BTW, does your CDRom show up as identified (and working) hardware on your system?
Thank you in advance for the help!
Hudson

Adobe Flash will not Run

I have gone through all the forums and installed and uninstalled flash 3 times. I have gone through the active-x control and still now luck...it wont run although its showing as a successful install. I am running Windows 7 Home Edition with IE 9 version 9.0.8112, 64 bit operating system with 4.00 RAM.
I need help...this is frustrating. I have tried logging onto my son and wife user name on this computer and still flash will not run.
Thanks in advance for the help.

See if any of this helps:
http://forums.adobe.com/thread/885448
http://forums.adobe.com/thread/867968

Canon 580EX Flash will not fire. Being shot on a Canon 5D Mark III.

The light does not start out green and stays red on the 580EX Flash. It doesn't even go into a sleep mode when not activated for a length of time. Fresh batteries does not make a difference. It will allow me to change settings but it won't fire. The infra-red displays it's test light but the flash will not discharge even when it demands it. It is not on slave or wireless settings. Nothing makes the flash go off, even the test flash.

First, the red light on the flash indicates it's ready to fire. It goes off when the flash is recycling.
That "pilot" light also is a test button... Turn the flash on and as soon as it lights up, press it. If the flash fires, then it's likely the flash is fine.
Next, check in your camera menu... is Flash Firing (which might be in a Flash Setup group on a later camera model) set to "enabled"? Silly little thing, I know... but it happens. Don't ask me how I know!
Also check the flash is fully mounted in the hot shoe. The locking lever will not go all the way to the latched position, if the flash isn't fully seated in the shoe. The locking lever actuates a small pin on the flash's foot, that fits into a corresponding hole in the hot shoe, both to insure the flash is fully in place and to secure it there.
If all the above checks out okay, another possibility is the camera's exposure mode. Now, personally I don't use them so can't say for certain, but assuming your camera even has them, maybe some of the more automated "scene modes" such as the "running man" for sports, etc. prevent the flash from firing.
Again, I'm not certain how the flash will perform in those modes... But you should use Av, Tv, P or M to test the flash anyway. In the auto exposure modes Av, Tv and P, the flash will fire at reduced output, as FILL light. In the manual M mode, it will fire FULL, as the main light source. Often when firing as fill with reduced output the red light of the flash doesn't go out with a single shot... I often can get 2 or 3 pops out of it before the light goes out and the flash goes into recycle mode for a few seconds.
Is it possible the flash actually is firing, but as fill so it's not a very strong output and it doen't need to go into recycle mode? You might not see the flash, if it's at reduced power and you have your eye to the viewfinder (which blacks out momentarily during the short duration of the exposure). Usually you hear the flash "pop", but if shooting somewhere with a lot of background noise, might not even be able to hear that.
Finally, are you trying to use the flash wirelessly? If so, then there are a number of possibilities. First, the flash needs to be set as "slave". Next, the camera's on-board flash needs to be popped up to act as the controller. Also, the flash and camera need to be set to a matching channel or group. Also, the flash may need to be rotated so that the red pane on the front is facing the camera. Plus wireless flash control is optical, so is "line-of-sight" only. And it's reach is rather limited.
Some of these suggestions may have already occured to you. If so, great! I don't know your level of experience with the flash or what camera you are using, so am just throwing out possibilities that occur to me. I hope this helps!
Alan Myers
San Jose, Calif., USA
"Walk softly and carry a big lens."
GEAR: 5DII, 7D(x2), 50D(x3), some other cameras, various lenses & accessories
FLICKR & PRINTROOM

My macbook pro charger will not charge my mac. The charger is in great condition, but it will not register as charging and it will not charge my computer. is there any way to fix this?

My computer has stopped recieving charge. The charger is in great condition, but it will not register, nor charge my computer. I do not know if its my mac or the charger. Is there any way to fix this?

Do you have another charger to test with?
It is very possible that somehow the wire might have gotten bent without your knowledge and that is why it is not working.
If you have an Apple store near you, you might want to set up a genius appointment so that they can test it for you.

My serial number will not register

I purchased this photoshop lightroom but the serial number will not register and Adobe dont seem to offer any real help

For the link below click the Still Need Help? option in the blue area at the bottom and choose the chat option...
Serial number and activation chat support (non-CC)
http://helpx.adobe.com/x-productkb/global/service1.html ( http://adobe.ly/1aYjbSC )

HT4623 iPhone 4s will not register with server after iOS 6 update

My iPhone 4s will not register with server after iOS 6 update. Does anyone has similar problem?

Obviously since you have iOS 7 you're a developer. As a developer, you signed a NDA with Apple not to discuss the iOS on a public forum. Please log in to the Developer Forum using your credentials and ask for help there, lest you risk having your credentials terminated.
Thanks, and best of luck to you.
GDG

Flash will not install

I have been trying to install adobe flash. First instructions were to uninstall and previous versions. I did that and now Flash will not install. It says that gplay is interfering and can not down load. I dont even know what gplay is, were do I find it, what does it do, and how do I make it go away to get Flash.
I have been working on this for a month. I downloaded Chrome and that is working fine because it has Flash with it, but I deleted flash from my computer and AOL is my internet provider and I cant play videos and such from my mail.
Help, I am so frustrated.
Cindy

Hi,
Which operating system is your computer running on?
If you are using Windows, got to the Task Manager and click on the Processes tab.
Then click on "Show Processes from all users".
In the list of processes, look for "gplay.exe". Select it and click on End Process.
Try downloading and installing Flash Player after that.

Adobe Flash will not download

Please help adobe flash will not download. It only saves up to 50%

Flash Player Help | Installation problems | Mac OS
Flash Player Help | Installation problems | Flash Player | Windows
Mylenium

Flash will not publish + FLV question

Hello,
I am currently building a game in Flash CS4, but am stuck due to a Flash problem. I have searched the forums for a sollution, but have yet to find one.
The Problem:
Adobe Flash will not export, or publish my .FLA file, nor will it create a .SWF at the chosen destination under the publish settings. Whenever I try to export/publish my .FLA, the export/publish pop-up window opens, and the progress bar runs all the way through. Once that is done, the window which normally appears immediately afterwards, in order to test the flash, does not appear.
Furthermore, Flash seems to have deleted the .SWF, and any other files I wish to publish the moment the publish/export process is completed.
The strange thing about this problem is that I may be lucky and have Flash actually export and publish correctly on its first go. However, when I try again, it won’t publish/export until I restart flash.
This problem happened on three separate windows machines (Vista and 7) under both Flash CS4 and CS5.
Note:
I have discovered that this problem may be related to the many embedded FLV video clips I have created for the game’s character animations (6+ characters with 30 very short animations each).
These animations were rendered in a 3D CG software, which were then edited in Adobe After Effects, and exported as .FLVs for use in Flash.
Oddly enough, once I’ve deleted all the embedded FLV clips from the library, Flash will once again publish and export. This is not an acceptable solution to my problem, however. I already searched for any corrupted FLV files, but could not find any.
My questions are:
1. What can I do to make Flash publish/export once again, while having my embedded .FLV clips within the library? Is there something I am over-looking, or any settings I must change in Flash?
2. Which settings (in Adobe After Effects) are best to export .FLVs for use in flash?
3. If I cannot use FLVs, what other options do I have, in order to use my CG animations in Flash? I tried PNG sequences, but Flash complains about low memory, and crashes (FLVs were working great up until now).
Any help would be greatly appreciated. Thank you in advance.

I've also experienced problems with the Publish process dropping out and failing to complete - no error messages in the Output pane or Compiler errors, just a total hang of the Publish status bar (and no published files...).
I can't say I've pinpointed the exact cause of this, but it may be related to having all objects on the Stage locked (possibly when they are not placed in the main canvas area).
Adding a new layer and creating a new object seems to help. If the publish process (including TestScene) has stalled, restart Flash and reload the movie...
Hope that helps! It's kinda scary watching that Publish bar disappear into nothingness when you've got literally hours/minutes/seconds left to get the thing built and running :-)

When I click install flash I get a blank window with this comment at the top 1 item Zero kb available and flash will not install This is my first time on this forum what do I do next please

When I click install flash I get a blank window with this comment at the top 1 item Zero kb available and flash will not install

https://forums.adobe.com/thread/1195540

Flash will not register in explorer 10 in windows 7

Similar Messages

Maybe you are looking for