Flash won't run, says its not loaded, when its embedded on samsung tablet and Windows 8.

On samsung tablet 500T windows 8 flash is embedded. It says when I try to run flash that it is not loaded. I followed all of the help and made sure all of the settings are correct. It still will not run. The only error is that it is NOT LOADED to download it from adobe.
Doug

Hmm, have you verified that active x filtering is not enabled? You've probably tried the steps outlined here but take a look just in case.
Enabling Flash Player in Internet Explorer
ActiveX Filtering in Internet Explorer

Similar Messages

Firefox 4.0.1 sometimes says that "Firefox is already running but is not responding" when I go to open it and I have to restart the computer to get it to open!

There are no more details really. I go to open Firefox (when it is closed) asd it gives me the above message - so I have to restart the machine to open Firefox!

Many thanks for responding. Your suggestion led me to this website:
https://support.mozilla.com/en-US/kb/Firefox%20is%20already%20running%20but%20is%20not%20responding
which infers the problem exists and seems to confirm the only way is to restart the machine.
Not being computer literate I cannot tell whether or not you can get around the 'lock/unlock' problem! What I need is an easy 'fix' but there does not appear to be one!!
Thanks for trying!
Cheers
Mike Barker

TS1398 Hello, my iPod touch is not working right. It says its connected but if I select App Store, safari and other apps that require wifi pops out a note saying either"error loading" or "cannot connect to iTunes Store" and would exit the app automaticall

Hello, my iPod touch is not working right. It says its connected but if I select App Store, safari and other apps that require wifi pops out a note saying either"error loading" or "cannot connect to iTunes Store" and would exit the app automatically. Please help.
Thank You.

See:
Can't connect to the iTunes Store

I baught Seagate Backup plus 2T hard drive to use as my Backup time machine. But its not working when i connect to time machine its not coping files, it keep saying preparing files. Can someone help me please...

i baught Seagate Backup plus 2T hard drive to use as my Backup time machine. But its not working. when i connect to time machine its not coping files, it keep saying preparing files. Can someone help me please...

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

My battery icon has disappeared from my menu bar at the top of the screen and the energy saver preferences simply says 'Could not load Energy Saver preference pane'

My battery icon randomly disappeared a few months ago from my menu bar and i have been unable to make it come back. After researching solutions online it soon became clear that all of the suggestions needed me to go into the energy saver preferences in the setting however the icon for the energy saver preferences is no longer there and whenever i click in the blank space where it used to be, it simply says 'Could not load Energy Saver preference pane'. As a result of this i never know how much battery i have left and so i just have to wait for the machine to die each time
The mac in question is a 13 inch 2012 macbook air that is running on OS Mavericks at the moment.
Any ideas on how to get the icon back?
- I recently discovered by accident that before i actually log into my account on my mac, when i am still on the page that contains the options of guest user etc. at that point the battery icon is displayed in the top right hand corner? Why is it that the icon exists there but not once i have logged it? Thankyou for any advice.

Nzdmalan the Adobe Creative Cloud application can be found in your Applications folder. Are you able to access the application itself? Is your computer managed by an I.T. department?

Its says its downloading but its not moving further. its seems like its not downloading

its says its downloading but its not moving further. its seems like its not downloading

It takes a while to get going. If you see no movement for about half an hour restart and it should begin the DL.
YOu should at least see a loading bar under your Launchpad icon.

Since upgrading to Firefox 27.0 some webpages will not load when I click on them. It gives me a message saying that Firefox can't find the server.

Since upgrading to Firefox 27.0 some webpages will not load when I click on them. It gives me a message saying that Firefox can't find the server. I have to click the link several time before it will load and sometimes when they do load it does not show the page right. It is like the HTML is messed up or something. I have tried everything I can think of. I started in safe mode, still did it., I removed add-ons, still did it., I reset Firefox and still did it., I completely uninstalled Firefox and re-installed Firefox and it still does it. I have tried Malware Bytes Anti-Malware scans and Avast boot-time scans and found no malware or viruses. I have found that those websites open the first time with no problems on my IE9 and they used to do so in Firefox 26.0. I'm at my wit's end. The website links are in my bookmarks and are used all the time so they are trusted and my avast is set to allow them. They range from news websites to gun websites and everything I have read says that Mozilla does not filter those unless something has changed recently.

Try this as a first step; 
Clear the Cache '''''Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"''''' 
and 
Remove Cookies '''''Firefox/Tools > Options > Privacy > Cookies: "Show Cookies"''''' 
If there is still a problem,
'''''[https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode Start Firefox in Safe Mode]'''''
While you are in safe mode;
'''''Firefox Options > Advanced > General'''''. Look for and turn off '''Use Hardware Acceleration'''.

I rented a movie on an iPad mini while connected to wifi. Now I'm in the car with out Internet and when I try to play the movie is says "could not load movie" what can I do? I purchased it from iTunes and let it load fully before leaving.

Can somebody help me figure this out? So before a road trip I rented a movie on my Ipad mini. The movie fully loaded before I left. It downloaded under wifi. Now that I'm in the car I tried to watch the movie but it isn't working. When I press play an error message pops up saying "could not load movie" can I not watch it with our wifi? What's going on? What can I do to watch the movie?

Having the same problem. Watched 25 minutes of a rental and it stopped with the message"unable to load video"
Using current version IPad mini.
Ios7 is HUGH PIECE OF CRAP!!!!

I have a used iMac, HD wiped, OS 10.6.8 freshly installed w/Rosetta, Photoshop Elements won't start saying "could not complete because of missing or invalid personalization info." previous owner's name still there preventing initialing?

I have a used iMac, HD wiped clean, OS 10.6.8 freshly installed w/Rosetta, Photoshop Elements was installed but won't start saying "could not complete because of missing or invalid personalization info." is previous owner's name somehow still there preventing initialing? How do I remove and install my own? I don't understand as HD was completely wiped with no OS when I got it.

I think Adobe allows their software to be installed on 2 computers only. However, if say you buy another computer and wish to install PSE on the new computer ( effectively a 3rd computer as far as Adobe is concerned ) PSE needs to be properly uninstalled ie not simply by uninstalling using the operating system's uninstall process. It needs to be uninstalled using the Adobe uninstall process that is contained within the software.
You should then be given a prompt as to whether you will be reinstalling on the same computer or if you wish to remove altogether. If the latter, then all traces are removed and the software can be (re) installed on the new computer.
If, unknown to yourself, the software had been installed on 2 computers and although you or the previous may have wiped the hard drive clean, as far as Adobe is concerned the software is still ' registered / assigned ' to 2 computers.
If the previous owner bought a new computer and installed their PSE on it, wiped the hard drive clean without properly uninstalling/removing PSE thentherein probably lies the prblem.
As Allan Jones said, it 's probably worth your while to purchase your own copy.
Hope this helps.

In chrome browser says : "could not load adobe acrobat npapi plug-in version 10.1.4" whenever i ne

I have not been able to use chrome browser the last month for documents: display says : "could not load adobe acrobat npapi plug-in version 10.1.4"
I haven't been able to figure out how to fix this, does anyone know what i need to do

Go to chrome://plugins and enable chrome plugin 'Chrome PDF viewer'.
Regards,
Ravi.

Iphoto doesn't open after update MAC OSX 10.6.8, error message says: library not loaded

iphoto does not open after software update.
i am using MAC OS X 10.6.8
it says: library not loaded,...reason image not found
EXC BReakpoint (sigtrap)

It's missing background frameworks:
Library not loaded:/library/frameworks/ilifepagelayout.framework/versions/a/ilifePageLayout
To re-install iPhoto
1. Put the iPhoto.app in the trash (Drag it from your Applications Folder to the trash)
2a: On 10.5: Go to HD/Library/Receipts and remove any pkg file there with iPhoto in the name.
2b: On 10.6: Those receipts may be found as follows: In the Finder use the Go menu and select Go To Folder. In the resulting window type
/var/db/receipts/
2c: on 10.7 they're at
/private/var/db/receipts
A Finder Window will open at that location and you can remove the iPhoto pkg files.
3. Re-install.
If you purchased an iLife Disk, then iPhoto is on it.
If iPhoto was installed on your Mac when you go it then it’s on the System Restore disks that came with your Mac. Insert the first one and opt to ‘Install Bundled Applications Only.
If you purchased it on the App Store or have a Recent Mac you can find it in your Purchases List.

HT1498 I rent a movie and I can see it. And I go to iTunes Store, check for rentals and its not loading the movie.

I rent a movie and I can't see it. I went to itune store and check for rentals, but its not loading the movie. What should I do?

I went to check for rentals on Apple TV to find rental. There is no support and no resolve. The screen just kept loading, never showing the movie after I purchased it. This is the second time this has happened to me. Very disappointed.
My have to look for alternative..

I am using strobe player in flex builder 4.6 but its not loading.

I am using strobe player in flex builder 4.6 but its not loading,
I have made required change in compiler option as below:
-locale en_US -swf-version=11 -define CONFIG::LOGGING true -define CONFIG::FLASH_10_1 true -define CONFIG::MOCK false -define CONFIG::PLATFORM true
There is no any error but player does not load, here is my code I am using;
<?xml version="1.0" encoding="utf-8"?>
<s:Application xmlns:fx="http://ns.adobe.com/mxml/2009"
 xmlns:s="library://ns.adobe.com/flex/spark"
 xmlns:mx="library://ns.adobe.com/flex/mx"
 applicationComplete="init(event)" backgroundAlpha="0">
<fx:Declarations>

</fx:Declarations>
<fx:Script>
<![CDATA[
 import mx.core.UIComponent;
 private const HTTP:String = "http://ec2-54-84-194-229.compute-1.amazonaws.com:1935/live/legacyLive/manifest.f4m?DVR";
 protected function init(event:Event):void
 var playerInstance:StrobeMediaPlayback = new StrobeMediaPlayback();
 var ui:UIComponent = new UIComponent();
 var parameters:Object = {
 src:HTTP,
 controlBarMode:"floating",
 controlBarAutoHide:"true"
 playerInstance.initialize(parameters, systemManager.stage, systemManager.loaderInfo, null);
 ui.addChild(playerInstance as DisplayObject);
 addChild(ui);
]]>
</fx:Script>
</s:Application>

I am using strobe player in flex builder 4.6 but its not loading,
I have made required change in compiler option as below:
-locale en_US -swf-version=11 -define CONFIG::LOGGING true -define CONFIG::FLASH_10_1 true -define CONFIG::MOCK false -define CONFIG::PLATFORM true
There is no any error but player does not load, here is my code I am using;
<?xml version="1.0" encoding="utf-8"?>
<s:Application xmlns:fx="http://ns.adobe.com/mxml/2009"
 xmlns:s="library://ns.adobe.com/flex/spark"
 xmlns:mx="library://ns.adobe.com/flex/mx"
 applicationComplete="init(event)" backgroundAlpha="0">
<fx:Declarations>

</fx:Declarations>
<fx:Script>
<![CDATA[
 import mx.core.UIComponent;
 private const HTTP:String = "http://ec2-54-84-194-229.compute-1.amazonaws.com:1935/live/legacyLive/manifest.f4m?DVR";
 protected function init(event:Event):void
 var playerInstance:StrobeMediaPlayback = new StrobeMediaPlayback();
 var ui:UIComponent = new UIComponent();
 var parameters:Object = {
 src:HTTP,
 controlBarMode:"floating",
 controlBarAutoHide:"true"
 playerInstance.initialize(parameters, systemManager.stage, systemManager.loaderInfo, null);
 ui.addChild(playerInstance as DisplayObject);
 addChild(ui);
]]>
</fx:Script>
</s:Application>

I'm trying to connect my iPad to my Samsung galaxy s by bluetooth but the ipad will pair with it but not connect and says "its not supported" does anyone know what this means and how I get it to work?

I'm trying to connect my iPad to my Samsung galaxy s by bluetooth but the ipad will pair with it but not connect and says "its not supported" does anyone know what this means and how I get it to work?

iOS devices do not have the BT profiles that support file sharing and othr general functions. See:
iOS: Supported Bluetooth profiles
Basically it support headphones, keyboards, speakers, peer-to-peer gaming

Flash won't run, says its not loaded, when its embedded on samsung tablet and Windows 8.

Similar Messages

Maybe you are looking for