Flash works in Flash editor but not when puiblished

Hi
I have got my flash working fine in the editor but when I
publish it, neither opening it in IE from the hard drive, nor from
the internet works.
The animation works fine, but there should be images loaded
onto the animated squares and there's not.
Any thoughts?
Thanks

LLuis12 wrote:
> Hi
>
> I have got my flash working fine in the editor but when
I publish it, neither
> opening it in IE from the hard drive, nor from the
internet works.
>
> The animation works fine, but there should be images
loaded onto the animated
> squares and there's not.
My guess is your paths are wrong to the loaded content. Done
for local view
not for html. Make sure the paths to files are a ok.
Best Regards
Urami
<urami>
If you want to mail me - DO NOT LAUGH AT MY ADDRESS
</urami>

Similar Messages

  • Fixed headers while scrolling works fine in bids but not when deployed to reportserver

    Hi, I am using SQL Server 2008 R2 & deploying a report to reportserver with fixed headers while scrolling, this works fine in bids but not when deployed to reportserver. We are IE 9.
    Thanks in advance...............
    Ione

    Hi ione721,
    Since you have identified the 2 xml files are identical, according to my knowledge, there maybe a compatibility issue with IE 9 and SSRS 2008 R2, so I suggest that you could run the report in compatibility mode. Please make sure you have turned on Compatibility
    View in Internet Explorer 9 by following steps:
    When Internet Explorer recognizes that a webpage is not compatible, you will see the Compatibility View button on the Address bar. Try clicking it.
    When Compatibility View is turned on, the button changes from an outline to a solid color when you view the page.
    The following screenshots are for your reference:
    If you have any questions, please feel free to let me know.
    Best Regards,
    Wendy Fu

  • Load swf works in Publish Preview but not when published

    Hi Folks,
    I having a problem where im trying to load two 1mb SWF movies into my Flash piece. It works fine in Publish Preview but not when I finally publish. I get this error in IE:
    SecurityError: Error #2000: No active security context.
    I have googled around and there is some talk online of a hack where by you get a timeout to overcome this. However im not so technical do I dont really know how to do this to my code in AS3. My code at the moment is below.
    Any help would be much appreciated and rewarded with Karma
    movieClip_12.addEventListener(MouseEvent.CLICK, fl_ClickToLoadUnloadSWF_9);
    var fl_Loader_9:Loader;
    //This variable keeps track of whether you want to load or unload the SWF
    var fl_ToLoad_9:Boolean = true;
    function fl_ClickToLoadUnloadSWF_9(event:MouseEvent):void
    if(fl_ToLoad_9)
      fl_Loader_9 = new Loader();
      fl_Loader_9.load(new URLRequest("search.swf"));
      addChild(fl_Loader_9);
    else
      fl_Loader_9.unload();
      removeChild(fl_Loader_9);
      fl_Loader_9 = null;
    // Toggle whether you want to load or unload the SWF
    fl_ToLoad_9 = !fl_ToLoad_9;
    movieClip_14.addEventListener(MouseEvent.CLICK, fl_ClickToLoadUnloadSWF_10);
    var fl_Loader_10:Loader;
    //This variable keeps track of whether you want to load or unload the SWF
    var fl_ToLoad_10:Boolean = true;
    function fl_ClickToLoadUnloadSWF_10(event:MouseEvent):void
    if(fl_ToLoad_10)
      fl_Loader_10 = new Loader();
    fl_Loader_10.load(new URLRequest("refunds.swf"));
      addChild(fl_Loader_10);
    else
      fl_Loader_10.unload();
      removeChild(fl_Loader_10);
      fl_Loader_10 = null;
    // Toggle whether you want to load or unload the SWF
    fl_ToLoad_10 = !fl_ToLoad_10;

    I think this is either a problem with my site preLoader or my external .swf Loader. I was checking out the bandwith profiler and saw something weird and I wondered if anyone could explain...I've added a picture. I have a blank frame on only my actions layer to export classes to and it seems that frame 2 is "bleeding" into frame 1. Could this be my problem? Why would this happen? Thanks

  • Podcast - works on iTunes page but not when subscribed

    Hi, I produced my podcast, submitted the feed through iTunes store and was validated. However, it happens so that people can listen to the podcast on iTunes page but not when they subscribe to it and try to download. error points to URL issues apparently. Help.

    It works perfectly well for me. On subscribing I saw all three episodes and downloaded and played Episode 2 without any problems. The only explanations I can suggest are that either some of your subscribers are having some sort of technical issue at their end: or that your server is intermittently sulking and failing to respond to requests. Try playing the episode from this link a few times on spaced-out occasions and see whether you ever get a failure:
    http://thecricketcouch.com/CouchTalk/CouchTalk-AntSims-SanaKazmi-062611.mp3

  • Firefox keeps asking to install Flash. When I attempt this, I get an error message stating it failed. Flash works in Google Chrome, but not FF.

    I don't know what happened but Firefox keeps asking me to install Flash. When I attempt to install the program, I get an error message that it has failed. There is no other information given and I'm just left hanging. I've tried this over twenty times with the same results. I've even uninstalled and re-installed Firefox, but this continues. I'm unable to watch any YouTube videos. I then installed Google Chrome and all is working fine. I can't stand the Google company though and really with I could continue using Firefox. Why is GC working for me any FF not? How can I fix this?

    Google Chrome comes with its own Flash plugin, so doesn't require to install Flash separately.
    You can find the latest Flash player versions for Firefox on this page.
    *http://www.adobe.com/special/products/flashplayer/fp_distribution3.html
    You may have to run the Flash installer as Administrator (right-click: Run as Administrator) and make sure that Firefox and possibly other browsers are closed.

  • Flash works on some websites but not others

    I have been struggling with some Flash player issues for a
    while. Most of these were, I believe, due to a spyware infection
    that I have since resolved. I have tried to uninstall and reinstall
    the player plugin several times. I have gotten to the point where
    the Flash player plugin works for nearly every website I can find,
    in Firefox and in IE7. The only thing that does not work is when I
    go to ESPN.com while using my university wireless network
    connection -- certain Flash-related aspects of this page show error
    messages or do not show at all. After having visited this site,
    even when I use my laptop computer on a different wireless network
    connection, this site is always corrupted in this fashion. When I
    uninstall the Flash player plugin and reinstall it, these aspects
    of ESPN's website function properly, but only when I am not using
    my university connection.
    All other websites seem to be fine, but ESPN is a site I
    visit a lot and I'm at a loss as to what to do. I have never had a
    problem installing the player, and I use WIndows XP Home so I have
    not used the SubinACL program to fix my Windows system registry.
    I've read and tried most of the other solutions in this forum and
    they do not seem to solve my specific problem. Any help anyone
    could give would be appreciated.

    It seems to be accessible, yes. It's listed as
    HKEY_CLASSES_ROOT\ShockwaveFlash.ShockwaveFlash.9\CLSID. I can give
    you the data string if you like. I've really never edited my system
    registry so I'm not sure what I'm doing.

  • Flash works in some places, but not others....

    It seems my problem has changed from what I origonally thought it was. I thought my flash player didn't work at all. Mainly because I typically use it for one thing, and that one thing wasn't working (photobucket). After trying to uninstall flash, reinstall it and getting the "getPlus+(R) installation corrupt error", I did some more reading and research.
    I followed this link - www.adobe.com/software/flash/about - and it says I have ver. 10,0,32,18 installed. So that is good, it's installed but it still doesn't work everywhere.
    I've tried youtube and it works just fine.
    The problems I am mainly having is with Photobucket. When I go to my own Photobucket acct. and play a video from my acct. it works but it is painfully slow to load. I might wait up to 2-3 minutes for one of my own videos to load so that I can watch it. This never took more than 10-20 seconds to load before.
    Now when I follow a link posted on a forum that is a video link from another persons Photobucket acct. is where the real problem is. It won't play at all. The player loads, but the screen freezes with the first image of the video. The taskbar shows it is still loading, but it never loads. After a few minutes the taskbar shows 'done', but nothing has changed. The video is still frozen at the beginning and it shows me a pause button in the bottom left, like it is playing....but of course it is not.
    Also, more often than not, while the video is trying to load the web browser will be "not responding", the computer freezes, and I have to end all tasks and restart the browser. This is really driving me crazy....
    I am running Vista Home Premium 64-bit SP1. I used to use IE7. I have now switched to Firefox 3.5, and there is no difference between the two web browsers as far as this problem is concerned.
    TIA for any help with this.
    Chris

    Well, I think there are some big clues here that tell you where you should be pointing..  I haven't read any of your other posts though, so I may be missing something...
    " used to use IE7. I have now switched to Firefox 3.5, and there is no difference between the two web browsers as far as this problem is concerned."
    "I've tried youtube and it works just fine."
    "When I go to my own Photobucket acct. and play a video from my acct. it works but it is painfully slow to load"
    Here's what that says to me... you do not have a problem. Flash Player is installed and running.  It's Photobucket that has the problem, and that problem lies in their code and/or their network.  In this scenario there is virtually nothing we can do for your from the Adobe side of the equation. The fact that both the Flash Player activeX control in IE AND the Flash Player plugin behave the same way indicates to me that this is something Photobucket needs to look into.
    So, what can you do?
    1. Gather a bit more info.  Get a list of similar sites that work fine (Flicker, for example, would be good becuase it's similar)
    2. Uninstall Flash Player 10 and get an old Flash Player 9 install from the Archived Players technote:
               "Archived Flash Players available for testing purposes"   http://kb2.adobe.com/cps/142/tn_14266.html   
              (This assumes that Photobucket doesn't require Flash Player 10.  If they do this step won't work.  But if they do not require Flash Player 10, then testing with Flash Player 9 can help tell them if the problem was introduced by changes made to Flash Player 10 that they need to code for specifically)
    3. Open a support case with Photobucket
    Now, is it entirely impossible that there could be some Flash Player issue here? No, it's not.  But it's the kind of issue that Photobucket would have to find, then they work with us directly to address it.  Nearly impossible to do from the end user point of view because you have no insight into what their code is doing.

  • Flash working on some computers - but not others

    Good afternoon,
    We had a third party flash developer build out the flash
    navigation and masthead videos for a client's web site and although
    it works fine on my computer (and on the developer's computer), it
    does not work on any of the client's computers or my partner's
    computers.
    Here is the web site in question:
    www.quigleysimpson.com/index2.html
    According to the client and to my partner, the video cuts out
    after a second or two, and some of the navigation links are coming
    up 'not found' (e.g. the Multi-Cultural link in the top
    navigation).
    Upgrading to the latest version of Flash Player was the first
    thing we did, and the problem still exists. I can't for the life of
    me figure out why.
    Any help would be most appreciated.
    Cheers,
    Cynthia

    I understand that neither method did the repairs you are seeking. My post was a side-note information update for you and others who read these posts, that we haven't had to boot from the install DVD to do a Permissions Repair since Tiger (I think)or maybe even Panther (doesn't matter when the requirement was dropped anyway), and that you can actually set some permissions wrong by using the boot DVD because of changes in the OS since it was installed.
    For your problem I recommend creating a new temporary Admin user account and seeing if the problem continues in the new account. If it does, then the problem is in the OS, which can be re-installed over the top of your existing installation (without affecting your files in your user accounts). If the problem goes away, then it could be incompatible or corrupted preference files or other incompatible programs in the user account causing the problems. Right now you haven't isolated the problem to either possibility.

  • Works fine in debug but not when published

    So I have simple navigation code setup to step through frames (I'm using Flash instead PowerPoint--too many pictures that are PSDs and illustrations that are AIs to do the conversions over to something PowerPoint understands).
    The code:
    stop();
    stage.addEventListener(KeyboardEvent.KEY_DOWN, slideNav);
    function slideNav(event:KeyboardEvent):void
    switch (event.keyCode)
      case Keyboard.DOWN:
       nextFrame();
       break;
      case Keyboard.UP:
       prevFrame();
       break;
      case Keyboard.HOME:
       gotoAndStop(1);
       break;
      case Keyboard.END:
       gotoAndStop(this.totalFrames);
       break;
    When I test it using the debug (Ctrl+Shift+Enter) it works fine.  When I publish it, the up and down arrows work but the Home and End keys do not work.  They do nothing, no error messages, nothing.
    Using Flash CS4 Pro 10.0.2.  ActionScript 3.  Windows 7 64-bit.
    Any suggestions?
    Thanks.

    Nevermind.  That was stupid of me.  Have to disable the keyboard shortcuts or it doesn't work.

  • Report works in Crystal Reports, but not when scheduled in Crystal Server

    Hi,
    I have a pretty simple report designed in Crystal Reports 2008. Basically it shows a list of call notes (memo field) from customer activities in our CRM system. The report works fine in Crystal reports, but when run or scheduled in Crystal Server 2008 the output is always blank. Furthermore, the page format etc. is "lost" in crystal server, so that the output is PDF of a quadratic blank sheet (not my standard A4 format)... Exporting to other formats - excel, Word etc. all gives the same result.
    I have tried to strip out various formulas, formatting etc from the report, but nothing helps. Which leads me to thinking that the real problem is that the report contains a memo field? Anyone else had this problem?
    wkr
    Claus
    Edited by: Claus Poulsen on Nov 9, 2010 3:34 PM

    Hi Claus,
    I've had issues between what Crystal does and what the Report Server does.  To resolve this, we found out Crystal Reports 2008 latest service pack has some things that will fix Server 2008 and they aren't in the latest Server update. 
    We updated Crystal Reports 2008 on our machines.  Installed the latest update for Crystal Server and then installed Crystal 2008 on the Report Server and installed the Crystal Reports 2008 update.  A lot of our compatibility issues went away after that. 
    Good luck,
    Brian

  • FM CRM_PRIDOC_READ_OW works in source system but not when executed from BW

    Hello All,
    I have extended an extractor in the source system by adding additional fields.
    One of the FM I've used is CRM_PRIDOC_READ_OW. When I run an extraction test in the source system eveything works and data does populates into the new fields.But when I run the infopackage from the BW side, I get an error message which saids the transaction has been terminated. I've been able to trace and pinpoint the possible cause of the error. When I do not call this FM, the infopackage finishes but I do not get data for the new fields and when I do call this FM, I get the error.
    Has anyone experiance this issue before?
    Your assistance will be much appreciated. Here is a portion of the code I wrote:
      loop at I_TABLE into l_s_ZASCRM_OPPT_I.
        lv_guid = l_s_ZASCRM_OPPT_I-GUID.
        lv_item_guid = l_s_ZASCRM_OPPT_I-ITEM_GUID.
        call function 'CRM_PRIDOC_READ_OW'
          exporting
          iv_header_guid = lv_guid
          importing
          ES_PRIDOC = ls_pridoc.
        loop at ls_pridoc-PRIC_COND into ls_pric_cond.
          if ls_pric_cond-kposn = lv_item_guid.
            case ls_pric_cond-STUNR.
              when '40'.
                l_s_ZASCRM_OPPT_I-zz_gpm_ttl_i = ls_pric_cond-kwert.
              when '55'.
                l_s_ZASCRM_OPPT_I-zz_gpd_ttl_i = ls_pric_cond-kwert.
              when '60'.
                l_s_ZASCRM_OPPT_I-zzfy_sp_i = ls_pric_cond-kwert.
              when '70'.
                l_s_ZASCRM_OPPT_I-zzfy_gpm_i = ls_pric_cond-kwert.
              when '80'.
                l_s_ZASCRM_OPPT_I-zzfy_gpd_i = ls_pric_cond-kwert.
            endcase.
          endif.
        endloop.
        append l_s_ZASCRM_OPPT_I to l_s_ZASCRM_OPPT_Itab.
        clear l_s_ZASCRM_OPPT_I.
      endloop
    Thanks,
    Jeff

    Hello Geo!
    Thank you for your question. I think we mapped all the systems you show. Always the same error. Concerning your systems my transport log would say:
    Source system R3DEV does not exist
    We mapped this.
    Any ideas? Is there maybe something in customizing to do what could be forgetten? The system is newly connected and there have never been a transport compounded to this source system before.
    Best regards,
    Peter

  • RMI Works In One Direction, But Not When Config Flipped

    Hi All,
    Interesting problem: I have an SSL-RMI server, running either as an application, or as a service using JS Wrapper, on PC-A, correctly serving content to a client running on PC-B.
    But when I flip the configuration, such that PC-B is now hosting an SSL-RMI server, PC-A's client is consistently showing a "connection refused" error, and will not connect whenever I attempt to run it as a service on PC-B.
    The strange thing is that I can run this server on PC-B as an application from the command-line or from within NetBeans, but again, as soon as I am running it as a service, using JS Wrapper, PC-A shows "connection refused".
    I've opened firewalls per the instructions found here:
    http://support.microsoft.com/kb/308127
    but these are simply two locally connected PC's, so what's the problem?
    PC-A: Windows XP Home Ed: 192.168.1.100
    PC-B: Windows XP Pro Ed: 192.168.1.102
    EJavaM07

    Was able to get past it by running the jar that was to become the service from the command line. This caused the Windows firewall to prompt me asking whether it should allow future use of these ports by this application. I answered yes, and then reinstalled it as a service using Java Service Wrapper (which is excellent, btw), and all ran smoothly thereafter.
    I guess when running as a service, the firewall breach attempt wasn't triggering a response from the Windows firewall, so nothing appeared to be working. I had already allowed this breach on my primary PC (months ago), so hadn't remembered that I needed to do that there.
    Thank you for the help.

  • Form auto query works in 10g developer, but not when served by forms server

    I have a form with a master and two detail blocks on the same canvas. When I run it from the developer tool on my desktop, it works great, the master block populates as expected based on the GO_BLOCK and EXECUTE_QUERY statements, and the detail blocks both populate automatically, firing their POST_QUERY triggers as well. When I run it on the server, I have to execute query manually, and then navigate to each of the detail blocks and then execute their queries manually too. When I do that, their POST_QUERY triggers are not firing.
    Desktop is (Windows XP Professional version 5.1 build 2600.xpsp_sp3_gdr.100427-1636 : Service Pack 3)
    Developer version is Forms [32 Bit] Version 10.1.2.0.2 (Production)
    Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit Production
    With the Partitioning, OLAP, Data Mining and Real Application Testing options
    Oracle Toolkit Version 10.1.2.0.2 (Production)
    PL/SQL Version 10.1.0.4.2 (Production)
    Oracle Procedure Builder V10.1.2.0.2 - Production
    PL/SQL Editor (c) WinMain Software (www.winmain.com), v1.0 (Production)
    Oracle Query Builder 10.1.2.0.2 - Production
    Oracle Virtual Graphics System Version 10.1.2.0.2 (Production)
    Oracle Tools GUI Utilities Version 10.1.2.0.2 (Production)
    Oracle Multimedia Version 10.1.2.0.2 (Production)
    Oracle Tools Integration Version 10.1.2.0.2 (Production)
    Oracle Tools Common Area Version 10.1.2.0.2
    Oracle CORE     10.1.0.4.0     Production
    Server version is OAS forms/reports install – 10.1.2.3
    OS – x86-64bit (Red Hat Enterprise Linux Server release 5.4)

    hello,
    does oracle showing any errors in user_scheduler_job_run_details for this job ? I would advise try inserting some debug statement to identify where exactly its stuck. Also please check sample configurations syntax for user_scheduler_jobs.
    Cheers
    Sush

  • Html snippet works w/in iweb but NOT when site is live & online @$#!

    help!? I have had a flash based slide show working on my iweb site for some time I used iweb enhancer to make it work w/ iweb 06 - now in 08 the "enhancer" doesnt work. The html snippet should & seems to...I am able to get the pages to behave very well while IN iweb the slide shows load while the program is active & when I publish the site to a folder the site works great - UNTIL I upload it and try to view it online THEN it doesnt work properly.
    I have a google map snippet that works fine live OR when browsing from the hard drive/folder WHY wont the snippets work when they are uploaded if they work ON my computer?????
    site is www.austin-studios.com click on seniors OR children...
    -thanks in advance

    Phil,
    Everything is working fine on my end too. (OSX 10.5.2) Tried your site on Safari 3.1 / Netscape Navigator 9.0.0.3 / Firefox 2.0.0.9 and Camino Version 2007022813 (1.0.4)... each one ran your snippets with out fail
    Would emptying cache on your computer help?
    Good Luck,
    John

  • MySQL : works in the IDE, but not when i launch the webapp

    Hello,
    when i setup a mysql connection, everything seems to be ok in the IDE, i can see my datasource, i can open my tables, see the content, etc. But when i click on the green arrow to deploying and testing my webapp, the server returns me a very long error page : javax.faces.FacesException: java.sql.SQLException: Error in allocating a connection. Cause: Connection could not be allocated because: com.mysql.jdbc.Driver
    What should i do ?
    thanks.
    PS : the entire error page is here, http://gpglinux.free.fr/error.html

    Hello,
    Can you give me the full path to where you placed the mysql jar?
    I just installed 6.1 and it is confusing in its directory structure.
    Thanks
    Frank

Maybe you are looking for