Flash xml file and file size?

I have a flash animation that pulls in images using an xml
file. I was
wondering if the images must all load first? In other words,
the images
are timed to load at different times. I was thinking, when I
did this,
that the images would not be downloaded until they were
called but I am
starting to doubt this.
Anyone have any idea how these images are loading?
Basically, my main concern is that they are putting too much
load on the
homepage. I have a feeling I know what the answer is.
Thanks

whatever the size of your SWF is, is what is going to be
loaded when entering your homepage. Flash doesn't know what images
to load, until you make a call to load them. It will only load the
assets on the timeline, and anything set to export on the first
frame.

Similar Messages

Purpose of message protocol file and file content conversion

hi
i am currently working in idoc to file scenario,
In what cases we will go file and file content conversion in message protocol for file adapter.
can anyone specify the real significance of it? bcoz this may help me and continue my scenario in its suitable path.
Regards
Saravanakumar PK

Hi,
In XI (internal) all XML message are based on the XI Message Protocol.
See: http://help.sap.com/saphelp_nw70/helpdata/en/b6/0b733cb7d61952e10000000a11405a/frameset.htm
XI Protocol is nothing but an SAP XI extension of SOAP protocol and SOAP protocol is nothing but a SOAP request in a HTTP protocol. SOAP request is nothing but SOAP extension of an XML message. Hence finally it drill downs to the fact that XI message is in fact an XML message with some extra information in the header which are SAP specific like the SAP Runtime, SAP Hoplist, etc...
File Content Conversion
Integration Engine understands only XML messages.Now if u r handling normal text file such as 'tab separated' file,'# separated' file, or a CSV file, you need to convert the content of the file to XML and File Content Conversion mechanism helps to do this job.This File Content conversion mechanism(option)is present with the File Adapters.both Sender and Receiver.
How to do FCC:
http://help.sap.com/saphelp_nw04/helpdata/en/2c/181077dd7d6b4ea6a8029b20bf7e55/content.htm
/people/arpit.seth/blog/2005/06/02/file-receiver-with-content-conversion
/people/venkat.donela/blog/2005/06/08/how-to-send-a-flat-file-with-various-field-lengths-and-variable-substructures-to-xi-30
/people/arpit.seth/blog/2005/06/02/file-receiver-with-content-conversion
/people/anish.abraham2/blog/2005/06/08/content-conversion-patternrandom-content-in-input-file
/people/arpit.seth/blog/2005/06/02/file-receiver-with-content-conversion
/people/anish.abraham2/blog/2005/06/08/content-conversion-patternrandom-content-in-input-file
/people/shabarish.vijayakumar/blog/2006/04/03/xi-in-the-role-of-a-ftp
Thanks
Swarup

Step by Step Guide Details for RFC to File and File to RFC scenario

Hi Guru's
Good day to you. I am tyring to develop some scenarios based on RFC adaptor. so i want to start up with basic scenarios like RFC to File scenario(Here i just want to pull some data from SAP using RFC and put it in destination folder as an text file) and FILE to RFC scenario (Here i just want to take some data from the file and update into SAP).
For doing these scenarios i would like to request you people to send me the step by step guide which explains me about the complete steps of configurations required to do the RFC to FILE scenario and FILE to RFC scenario.
I found some scenarios and i am in confused state. so i request you to please put your experience to help me out.
thanks in advance.
Regards
Raj

Hi Aaron,
I don't know your scenario and your ECC and PI versions but I learned how to use ABAP Proxy more than 1 year ago with the following tutorial:
Edit--> The forum doesn't allow me to post external link, just search "ABAP Proxy Communication Scenario" in google and visit the 1st result
The way to develop ABAP Proxys has changed a little if your PI is 7.1. In the ECC side, the transaction SPROXY looks much better too if you have a recent version of the ECC.
Edited by: Marshal on Oct 8, 2009 5:08 PM
I've found that SDN Document. Maybe the scenario is not the most simple to start with ABAP Proxy but is very well documented and is for PI 7.1. The document also handles the inbound and outbound proxys
[http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/c00ca32e-f991-2b10-f5be-97114bd2b08f&overridelayout=true]
Edited by: Marshal on Oct 8, 2009 5:22 PM

HT1386 My computer was stolen with all my iTunes on it. However, my iPod was not stolen. How do I transfer all files from my iPod to my new computer (purchased files and files I copied from CDs)?

My computer was stolen with all my iTunes on it. However, my iPod was not stolen. How do I transfer all files from my iPod to my new computer (purchased files and files I copied from CDs)?

http://www.wideanglesoftware.com/touchcopy/index.php

I am trying to create a panorama, when I enter File New I don't get the Photomerge Panorama option, the only options that appear are Blank file and File from clipboard. How do I get photomerge panorama

I am trying to create a panorama. When I enter FILE > NEW > the Photomere panorama option does not appear. the only options are Blank file and file from clipboard. This is in Elements 11 on Windows 8.1 OS. How do I get Photomerge Panorama to appear.

Since PSE11, you access the photomerge option in the 'Enhance' menu, last option. Or you can use the organizer (menu Edit / Photomerge).

Flashing question mark and file

My mac book is showing a question mark with a file and it is flashing when I turn the computer on, what has happened and what should I do?

There are four general causes of this issue:
1. The computer's PRAM no longer contains a valid startup disk setting when there aren't any problems with the disk itself. This can be checked for by pressing the Option key and seeing if the drive appears.
2. The internal drive's directory structure has become damaged. This requires usage of an alternate bootable system to perform the repair.
3. Critical system files have been deleted. This requires usage of an alternate bootable system to reinstall them.
4. The internal drive has died or become unplugged. This is the most likely case if the computer took a sharp impact or there are unusual sounds coming from its location.
(105838)

Bank File and File Formats

When sending ach file to bank after it gets placed on application server (what is application server transaction code) a direct interface or not? If not what is a direct interface?
What is flat file and xml file. Please tell the difference with example??
What are various file formats sap supports for importing ebs in sap? What information should be requested from bank?

Hi Sheena,
1. Outbound files - You can create a ACH file in any format you want. SAP support text file, IDOC.
After you run your payment program - F110 - the last step is to create the payment medium. When you run this payment medium program it creates the file in a specific format as per your configuration. This file can be stored in your hard drive (C:) or in the SAP server based on the path given by you in the variant.
You can use T-code FDTA to view the file.
If it gets stored in C: you can just go to the directory and double click the file.
If it is stored in SAP server you can use transaction AL11 to view the file.
2. Inbound file - The electronic bank statements come in various formats. The most common formats are BAI in US, Multicash in Germany, MT940 in Europe. Each format has been defined separately, you can go to Googe and search for details about these format.
SAP has standard program which read these formats and post them to your General Ledger.
If you have more questions, please post them and I would try to answer.

Writing File and File Member to AS400 using Access Classes

Hi! All,
I am in a fix here and would sincerely appreciate any help I can get. I need to write a pogram that will allow me to write a file and many FileMembers to the File in the AS400.
I have the following method which I thought would help me do it, but I get exceptions.
public static void writeFileOnAS400(String pFileName, String pFileMemberName, String pContents ) throws Exception
AS400 as400 = new AS400();
String as400FileName = "/QSYS.LIB/MYLIB.LIB/" + pFileName + ".FILE";
String as400MemberName = pFileMemberName + ".MBR";
// Create a file object that represents the file
SequentialFile newFile = new SequentialFile(as400, as400FileName + "/" + as400MemberName);
// Create the file
newFile.create(pContents.getBytes().length, "*DATA", "Data file created with " + pContents.getBytes().length + "byte record." );
// Open the file for writing only.
// Note: The record format for the file
// has already been set by create()
newFile.open(AS400File.WRITE_ONLY, 0, AS400File.COMMIT_LOCK_LEVEL_NONE);
// Write a record to the file. Because the record
// format was set on the create(), getRecordFormat()
// can be called to get a record properly formatted
// for this file.
Record writeRec = newFile.getRecordFormat().getNewRecord();
writeRec.setField(0, pContents);
newFile.write(writeRec);
// Close the file since I am done using it
newFile.close();
// Disconnect since I am done using
// record-level access
as400.disconnectService(AS400.RECORDACCESS);
This works the first time for the 1st Member(ie; when te file or Member is not yet created). When I want to add a new Member to the same file, by passing in the same fileName, but a different fileMemberName, it does not work. The string pContents is what I need to write to the Member.
Anyone Know about the AS400?
Thanks

The whole class is as shown below
import com.ibm.as400.access.*;
public class AS400Utility
public static void writeFileOnAS400(String pFileName, String pFileMemberName, String pContents ) throws Exception
AS400 as400 = new AS400();
String as400FileName = "/QSYS.LIB/IQFILES.LIB/" + pFileName + ".FILE";
String as400MemberName = pFileMemberName + ".MBR";
// Create a file object that represents the file
SequentialFile newFile = new SequentialFile(as400, as400FileName + "/" + as400MemberName);
// Create the file
newFile.create(pContents.getBytes().length, "*DATA", "Data file created with " + pContents.getBytes().length + "byte record." );
// Open the file for writing only.
// Note: The record format for the file
// has already been set by create()
newFile.open(AS400File.WRITE_ONLY, 0, AS400File.COMMIT_LOCK_LEVEL_NONE);
// Write a record to the file. Because the record
// format was set on the create(), getRecordFormat()
// can be called to get a record properly formatted
// for this file.
Record writeRec = newFile.getRecordFormat().getNewRecord();
writeRec.setField(0, pContents);
newFile.write(writeRec);
// Close the file since I am done using it
newFile.close();
// Disconnect since I am done using
// record-level access
as400.disconnectService(AS400.RECORDACCESS);
public static void main(String args[])
System.out.println("Writing file to AS400...");
try
writeFileOnAS400_2("BPL0000004", "M001", "<SampleXML>The sample file 1</SampleXML>");
System.out.println("Finished writing file 1");
writeFileOnAS400_2("BPL0000004", "M002", "<SampleXML>The sample file 2</SampleXML>");
catch(Exception e)
e.printStackTrace();
System.out.println("Completed file writing to AS400...");
}

Reporting of file and folder sizes in Realtime?

Hi,
I am sorry if this has been asked a million times before, but is there an option that I am missing or a third party soft that would allow my finder (and labels on my HDDs) to report the size in realtime? It doesn't seem to update untill I reboot... is this normal behavior? I am working off of a 80gb hdd, and I am always close to filling it up, so it would be of great help that I could see the actual size of my drives whenever I make any changes to them!
Thanks in advance for any help you might offer.

Click on the Desktop, then select "Show View Options" from the Finder's View menu. Check the box labeled "Show Item Info." Your drive data will be displayed below the Desktop icon.
The Finder normally displays window info in its status bar located at the bottom of the open Finder windows including available space. The Finder may get behind in updating the information in the status bar. This may be due to the Finder simply lagging or because the disk needs repair.
You can use the utility RefreshWindows to force the update (www.versiontracker.com.)

QuickTime takes forever to open larger movie files and files over network

Quicktime 7.2 used to open files immediately, but now it stops responding for a couple minutes or more before finally opening movie files.
Any one else having this problem?

Worked for me as well. I had Perian already, but after downloading and installing the new version, Quicktime works perfectly now.
Many thanks!

Duplicate file and file directory

Currently using 37.0.2
Notice in my file directory I have two Mozilla Firefox folders.
One has April 2015 dates.
The other has February 2014 dates.
Can I safely delete the Feb 2014 folder and its sub-directories?
Thanks

There are also old Visual Studio 8 folders with a number appended in the screenshot.
Did you ever do a Windows System Restore?
Yes, you can remove that folder.
If you want to know what Firefox version it is then you can check the application.ini file in a text editor via "Open with".

Different contrast with original HD files and files imported in Premiere Pro CS4

I'm experiencing a very strange problem. Not the first time though.
When I import files shot with reflex video cameras this is what happens:
It seems something like shadow/highlights feature in Photoshop, but I haven't done anything to have
such a huge difference.
When I import files shot with my Sony HVR Z1 regular videocamera nothing weird happens and everything
works perfectly.
Any ideas?
Thanks
Alessandro

I now use CS5 and I do not use a "reflex" camera... so this is only a GUESS
Does your timeline have red over the "reflex" video when you 1st import, and before you do any work?
If yes, that means you have a mismatch between your project and your video

Tar files and file associations

What is the default tar file association in OS X? How do I go about restoring the default file associations in OS X?
Thank you.

What is the default tar file association in OS X?
The Archive Utility.
How do I go about restoring the default file associations in OS X?
Select an item, choose Get Info from the File menu, change the application under Open With, click on Change All, and confirm this action. The setting is stored in an item's metadata and in a file in your home folder for global associations.
(45046)

WMV files and file extensions to upload in OLM

Can you upload .wmv files to be played in OLM? It plays from Windows Media Player in a stand alone mode.
What about pps. files? I saved a power point and uploaded it. It opened but it only showed the slides and I had to start it in MS PPT. So, I tried to save it in PPT Show and I get a bunch of java jibberish. Anyone have experience with either file type?
Edited by: user7120 on Sep 7, 2011 3:14 PM
Edited by: user7120 on Sep 7, 2011 3:14 PM

Anders,
Are you referring to the properties in the OLM setup? I have not tried to set it to display in a different window, but I will try. I created a new learning object and UPLOADED the video. When opening the file, I get a bunch of java language (jibberish) and the video does not show. Have you experienced that before?

Flash XML List and video

Hi, I am starting to learn flash, and have never posted here
before but now that I am getting deeper in to flash kinda need some
help. I am trying to build a video player with channels, Kinda like
MSN. Now I found the new tutorial located here
http://www.adobe.com/devnet/flash/articles/video_playlist.html
and this is pretty much what I needed to to its a start. but I
would like to add channels to it, so a user can choose say local
news, national news, sports, ect. I think the way I would have to
do it is to add another list and have that list populate the
existing list. is that able to be done that way ? is their an
easier way to do it ? I like using the xml list so its easy to
update. but any help would be super great.
Thanks alot.
Brian

Can anyone tell me if i could just rewrite the xml list to
have folders ? or am i going to have to use a css any help would be
great. Thanks

Flash xml file and file size?

Similar Messages

Maybe you are looking for