Flash0 dont show any files Cisco3945

Hello
I have a router 3945, version 151-2.T2, the dir command dont show any file in flash0,
The total is 4186591232 and free 4067074048, this indicate that something unknow is using that bytes.
R01IPMONSLA#dir
Directory of flash0:/
No files in directory
4186591232 bytes total (4067074048 bytes free)
Does anybody knows about this behaviour?and how can try to fix this?, there were not changes recently
Thanks for your help

I know what this is. This is a third-party CF isn't it?
Some third-party CF contains an auto-execute, proprietary software that are hidden.
If this is indeed a third-party CF, then use the router to format the CF.

Similar Messages

I am tryin to access old macbookpro harddisk on macbook air,when i connect it via usb i see the folders,but i dont see any files e.g. photos,movies,docs are not there,its shows that 220gb is used,but no data is visible...can u pls adv how to access data?

i am tryin to access old macbookpro harddisk on macbook air,when i connect it via usb i see the folders,but i dont see any files e.g. my saved photos,movies,docs are not there,its shows that 220gb is used,but no data is visible...all folder are empty.......can someone pls adv how to access data?

i am tryin to access old macbookpro harddisk on macbook air,when i connect it via usb i see the folders,but i dont see any files e.g. my saved photos,movies,docs are not there,its shows that 220gb is used,but no data is visible...all folder are empty.......can someone pls adv how to access data?

Bridge dont show raw files

hello bridge dont show raw files, I bought todaz PS CC , installed it, removed it and installed again an d it doesnt work still

Hi All,
About four months ago, I purchased CS3. I own two digital cameras, an EOS 5D and an EOS G9. I always shoot in Raw. When using a card reader to upload images through Bridge (i.e. get photos from camera), It worked flawlessly when reading the 5D. I could see the Raw images in bridge without a problem. When trying to read the EOS G9 Raw files from a card reader through bridge (i.e. get photos from camera) they were not recognized. I figured it must have something to do with drivers or how Camera Raw interprets the data. I upgraded Camera Raw, I believe to 4.5 on the advise from folks at Adobe. Bridge now recognizes the G9 Raw files and uploads them without issue. However, when trying to view the uploaded images through bridge it doesn't see the Raw images other than as a little Icon with a CR2 flag. Camera Raw can open an individual image, but the only way to view the images in mass, is to convert them to a PSD or JPG format. To have a few hundred Raw images in bridge and not be able to see them unless they're all converted to PSD or JPG is really disconcerting. Any insights or help with this would really be appreciated.
Thanks in advance .... -Scott

Firefox dont show any preview, so i cant print. Firefox 4.0.1/MacOSX 10.6.7

Firefox dont show any preview, so i cant print.
Firefox 4.0.1/MacOSX 10.6.7

Use "File" on the menu bar then "Print Preview", or
press the red "Firefox" button, then "Print" then "Print Preview"
Print Preview is all or nothing no such things a previewing a selection.
Was there a Print Preview button before.
The keyboard shortcut for Print Preview was reassigned to "Private Browsing".
I'm on a PC and don't do much printing anyway, but there is no requirement to first preview before printing, and don't think a Mac would require print preview first either.

HT203433 I am having trouble moving my music to my new computer. I have enable homeshare. it does not show any files in my homeshare. How do i get them out of the normal files into home share

I am having trouble moving my music to my new computer. I have enable homeshare. it does not show any files in my homeshare. How do i get them out of the normal files into home share

Welcome to the Apple Community.
The following article(s) may help you.
Moving your iTunes library to a new computer

When saving new bookmarks selecting chooose does not show any files

in firefox 3.6.6 when saving new bookmarks the choose option does not show any files.
have tried disabling extensions but no effect

Try http://kb.mozillazine.org/Locked_or_damaged_places.sqlite

JFileChooser doesn't show any file!!

Hi all,
I am developing an java application that uses JFileChooser to choose a directory. However, very strange, the JFileChooser opened does not show any file or directory in C: drive nor D: drive. How can that happen? Anyone knows?
JFileChooser fileChooser = new JFileChooser();
fileChooser.showOpenDialog(this);Above is my code. When I only execute above code, it is normal (can see those files in C: drive). But if i run above code with my application, it doesnot show any file in C: drive. Please help me!!

Try specifying the default location in addition to the component.
if(windows machine) result=createDialog("Choose Parent Directory","Select Folder","C:\\");
private static JFileChooser createDialog(String title,String ilabel,String directory) {
          JFileChooser result= null;
          // TODO Auto-generated method stub
        // Create a window and some components
        JPanel topPanel = new JPanel();
          JLabel label = new JLabel(ilabel);
        JFileChooser jFC = new JFileChooser(directory);
        // Set the window's layout
        label.setAlignmentX(Component.CENTER_ALIGNMENT);
        //set file dialog to use direcotries
        jFC.setFileSelectionMode(JFileChooser.DIRECTORIES_ONLY);
        // Setup the text, list, and checkbox
        topPanel.add(label);
        topPanel.add(jFC);
        int returnVal = jFC.showOpenDialog(topPanel);
        if(returnVal == JFileChooser.APPROVE_OPTION) {
            result = jFC;
        } else {
             result=null;
        return result;
     }

After installing OS X Yosemite my USB drive is not working as it was. It does not show any files in USB drive.

After I installed the latest OS X Yosemite my USB drive is not loading any files or folders which is located in it. Sometime it just show a blank window and sometime it shows folders and files but not clickable.

I have same problem but didn't find solution… If I put USB drive no files shown on finder… But If I use ForkLift files are showing but only in Forklift…
Need some clue how to fix it...

External Drive Does not show any file in finder

I do not see any file in my external hard drive. It a 2TB hard drive and in info it shows 727 GB remaining. I am sure files are there but for some reason they are not showing in finder. I am using iMac 10.6.8

How does this relate to iPhoto? You'd best ask your question in the Show Leopard forum as it's more a system/hardware issue.
OT

Compile errors dont show in file

When i have errors in my flexbuilder2 project, the errors are
displayed in the Problems window, with the correct description and
line numbet, but always with the Appname as the resource. So you
dont know in what file the error is located.
To make things worse, there are also no red markers in
Navigator panel. So it is extremely difficult to find the errors.
Because of this, a reinstalled Flexbbuilder after
deinstalling the previous version. Started with a new workspace,
but without succes.
The funny thing is that on my (smaller) laptop i dont have
any problem with the error message. It is exactly the same
installation project, and both run under Window XP and JDK1.5
Does anyone has a clue

how do i make this automatic so that newly downloaded songs just appear in the other users accounts?
You don't.
Each user has their own iTunes library file which tracks their own iTunes.

Firefox closes(dont show any message) when I open it.

I always use Firefox. But now, when I open it, the Firefox starts. It's normally. But after 2-3 seconds, the Firefox closes, and it's don't show any error/crash messages. Please help me I don't like the Google Chrome and I hate the IE so help me!
== Crash ID(s) ==
-

That is a problem with the Skype extension (Tools > Add-ons > Extensions).
Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
* Don't make any changes on the Safe mode start window.
See:
* [[Troubleshooting extensions and themes]]
* [[Troubleshooting plugins]]
If it does work in Safe-mode then disable all extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
* Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
* Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")
Other things that need attention:
Your above posted system details show outdated plugin(s) with known security and stability risks that you should update.
# Shockwave Flash 10.0 r45
# Next Generation Java Plug-in 1.6.0_20 for Mozilla browsers
Update the [[Managing the Flash plugin|Flash]] plugin to the latest version.
*http://www.adobe.com/software/flash/about/
Update the [[Java]] plugin to the latest version.
*http://www.oracle.com/technetwork/java/javase/downloads/index.html (Java Platform: Download JRE)

When im setting up my account, it dont show any box where i can click none, can i set it up by a computer? if so, whats the site?

i need help, because it does not show any box where i can click that says none, can i set it up by a computer? please help me

What kind of account are you asking about?

Opening from"Open Recent" does not show any files. Help!

Every time I start IBA the splash screen shows up the templates available. At the bottom of the screen there is an option to "open recent" files. The same at the "file" menu on the top menu bar. I see no file records in either one. I always have to use the simple "open" command and search for the files, where they are stored. This is rather annoying as I would prefer to be able to open from "recent" as you are supposed to be able to do. Please, give me some advice if I need to change something in the settings (I could not find any preferences allowing me to do this either.)

It might be best to contact Apple for support so they can make sure you don't remove something otherwise important
[email protected]
…support phone number call +1 (877) 206-2092.

Inline (CID) Images in eMail dont show any more

I get 4-5 bussiness status emails every day with many cid attached images in them.
This are about 2MB images via email every day.
I got this emails since years.
Some weeks ago the (CID-)images stoped from showing inline the HTML-mails.
They now show as tiny grey squares.
I had this effect with iPhone 4s and iPad2.
Receiving the emails with Outlook, the mail was perfect with all the images.
Colleagues getting the same emails. They can see the images after waiting for some minutes!! (Not seconds).
I restarted the devices - no change.
Question:
Is there any counter,memory or something else witch can be reseted to bring the images back "inline" my HTML Mails?

Before mp3 player became so in-depth, it was enough to just have the artist & title displayed for the file. This has changed with the current software capabilities, it is more important to have the "tags" correct for the player to recognize them. This helps you get the most from the player. Here's one way to correct missing/ unorganized tags. Realize that this can be a lengthy process, depending on how many songs and how many are not listed correctly.
1. Open iTunes- go to your "Library"
2. Make sure that all of your mp3s are in this folder.
3. Using either the ctrl+click, or the click+shift method, select all the songs of a particular artist.
4. right-click, select "get info" & go to the "Info" tab.
5. Now click the pertinent box for the songs and type the relative info into the corresponding field.
6. click "okay"
This is just something you have to play with, don't be afraid of the tabs, spend some time figuring it out and you'll speed up the process for future files.

Problem Folders on my desktop are no longer showing any files inside

I have been using windows 7 quite a bit lately, but I logged on snow leopard, and all the folders on my desktop are empty. They show that they are still trying to load what is in them, but nothing ever comes.
this is obviously a huge problem as it currently appears all my files are gone...anyone have a solution or having this problem as well?

I went through all of these steps. I also downloaded AVG antivirus. It detected nine files that may have been malware and I deleted them. I have restarted my computer several times after this and the folders on my desktop are still not displaying properly. Also my folders are unable to be dragged around the desktop. The whole desktop is messed up.

Flash0 dont show any files Cisco3945

Similar Messages

Maybe you are looking for