Flash10c.ocx is giving errors and is nowhere to be found.

I keep getting an error "Component 'Flash8b.ocx' or one of its dependencies not correctly registered: a file is missing or invalid". When it says "Flash8b.ocx" I am guessing it means there is a problem with Flash10c.ocx.
I decided that I was going to reinstall flash to try and solve the problem. I completely wiped out all traces of flash (or so I thought) using Revo and CCleaner and I also went through the registry myself to see if there was anything left behind. Then I installed a brand new version of flash and I got the same error. I went to windows\system32\macromed\flash\ and I couldn't find flash10c.ocx anywhere or any .ocx file for that matter. Then I did a search and I couldn't find it either.
Did the name of the file change in this newer version or something? I want to register or fix whichever .ocx file is responsible for the error I recieved but I don't know where it is.... Could someone please give me a hand? Thanks.

Do not manually "uninstall" Flash Player by deleting files and registry entries, but uninstall it correctly by using the uninstaller from http://www.adobe.com/go/tn_14157. If you just delete OCX files without unregistering them, you may expect probles later on.
In order to get Flash10c.ocx installed, you need to run the online installer on Internet Explorer, or the offline ActiveX installer http://fpdownload.macromedia.com/get/flashplayer/current/install_flash_player_ax.exe

Similar Messages

I can't reinstall firefox, I get the "profile cannot be loaded" error and no solution I've found works. The /appdata/roaming/mozilla folder is inaccessible.

I'm on Win7, 64 bit. I originally uninstalled because a program changed my new tab page to something unwanted and I had literally no way of changing it back. Now every time I reinstall it I get the "profile cannot be loaded, it may be missing or inaccesible" error, and I cannot create a new profile. Every time I try any method of opening the profile editor, I get the "profile cannot be loaded" error then too. I can't access the folder under /appdata/roaming/mozilla at all. It says it is inaccesible and access is denied, and trying to delete it tells me that I don't have permission (even though I'm the admin). No other fix I have seen has worked. Can anyone help, please?

I ran a virus scan, cleaned up a single piece of adware, restarted, and it suddenly worked. I'm not sure what exactly caused it to begin working but it did so I consider this matter closed.

CIM.bat giving error that weblogic lib path not found

I am using atg 9.1 and weblogic 10.3.2. Installed both s/w and started weblogic server. I am using cim.bat to configure and I am stuck at a point where it asks for the app server I am using and I selected 'Weblogic' and when it asked for the path..I gave the correct path where weblogic is installed...but it says Weblogic lib path not found...even though I can see the server/lib directory...could you please help ?

Yes, I did that...my weblogic is installed in c:\Oracle\Middleware\wlserver_10.3.2 and CIM gives a message that [c:/Oracle/Middleware/wlserver_10.3.2/server/lib] weblogic lib path not found
Also I see c:\Oracle\Middleware\wlserver_10.3.2\server\lib directory and all the required weblogic files available in that directory.

Somehow I have deleted a very important folder. It isn't in my Trash and is nowhere to be found. Ive even taken it into the Apple store and the guy has said that it is there but he can't retrieve it. Can it be retrieved?

Hi
I have inadvertantly deleted a very important folder from my computer. Ive taken it into the Apple store and the guy says he doesnt know what to do. Can anyone advise as this folder has my life on it?????
Sam

There is recovery software (do a Google search). When you delete something, the directory pointer is erased, not the data. HOWEVER, the system will use any available free space. If the data was not overwritten, you MIGHT be able to recover it. I have not used recovery software, so I have no recommendation.
Barry

Logic Pro 9- I saved a song- the audio files did not bounce and are nowhere to be found. The song is still there, but the audio files are missing. Any ideas?

I have searched the computer by song name in the audio files.
I have opened up media files and looked everywhere.
I tried remapping where they would be saved and hoping they were updated.
Any help finding where they are located would be great. The song still loads when I open it, I just can't find the audio files!

Have you tried using the built in Browser in LP?
http://help.apple.com/logicpro/mac/10/#lgcpc788cc57
Note: It works the same way in LP9 as in LPX

Report giving error when the alias in the sql statment is long

Hi,
When I am writing a select statement with long alias name, report in portal is giving error, and is working fine with sqlplus
Any idea,
Thanks,
Mansoor

Hi
when i run in foreground it is working perfectly. The Spool is not getting created.
regards
madhuri
Edited by: madhuri_2000 kumari on Nov 26, 2008 2:00 PM

Pacman giving error after 'packman-key --init'

Well after a long time i m back on arch. and i found out that pacman has changed and using pgp signature (happy now !). and everything is smooth except one thing pacman is still giving error and asks me to import pgp for every single package when i try to install something. here is an output :
[root@Olympians hades]# pacman -S rhythmbox
resolving dependencies...
looking for inter-conflicts...
Targets (32): aspell-0.60.6.1-1 clutter-1.8.2-2 clutter-gst-1.4.6-1
clutter-gtk-1.0.4-1 cogl-1.8.2-1 enchant-1.6.0-4 gmime-2.6.4-1
gobject-introspection-1.30.0-1 grilo-0.1.18-1 gvfs-1.10.1-2
gvfs-afc-1.10.1-2 hspell-1.1-1 hunspell-1.3.2-1 icu-4.8.1.1-1
json-glib-0.14.2-1 libdiscid-0.2.2-1 libdmapsharing-2.9.12-1
libgpod-0.8.2-2 libmtp-1.1.1-1 libmusicbrainz3-3.0.3-1
libpeas-1.2.0-1 libwebkit3-1.6.1-1 media-player-info-15-1
mutagen-1.20-3 mx-1.4.1-1 pygobject-devel-3.0.3-1
python2-beaker-1.6.2-1 python2-gobject-3.0.3-1
python2-mako-0.5.0-2 python2-markupsafe-0.15-1
totem-plparser-2.32.6-3 rhythmbox-2.95-1
Total Installed Size: 129.07 MiB
Proceed with installation? [Y/n] y
(32/32) checking package integrity [----------------------] 100%
error: grilo: key "A5E9288C4FA415FA" is unknown
:: Import PGP key 4FA415FA, "Jan Alexander Steffens (heftig) <[email protected]>", created 2011-08-25? [Y/n] y
error: icu: key "94657AB20F2A092B" is unknown
:: Import PGP key 0F2A092B, "Andreas Radke <[email protected]>", created 2011-05-14? [Y/n] y
error: enchant: key "976AC6FA3B94FA10" is unknown
:: Import PGP key 3B94FA10, "Jan de Groot <[email protected]>", created 2011-06-06? [Y/n] y
(32/32) checking package integrity [----------------------] 100%
(32/32) loading package files [----------------------] 100%
(32/32) checking for file conflicts [----------------------] 100%
(32/32) checking available disk space [----------------------] 100%
( 1/32) installing json-glib [----------------------] 100%
( 2/32) installing cogl [----------------------] 100%
( 3/32) installing clutter [----------------------] 100%
( 4/32) installing clutter-gtk [----------------------] 100%
( 5/32) installing clutter-gst [----------------------] 100%
( 6/32) installing grilo [----------------------] 100%
Optional dependencies for grilo
grilo-plugins: Plugins for grilo
( 7/32) installing gvfs [----------------------] 100%
Optional dependencies for gvfs
gvfs-afc: AFC (mobile devices) support
gvfs-smb: SMB/CIFS (Windows client) support
gvfs-gphoto2: gphoto2 (PTP camera/MTP media player) support
gvfs-obexftp: ObexFTP (bluetooth) support
gvfs-afp: Apple Filing Protocol (AFP) support
( 8/32) installing gvfs-afc [----------------------] 100%
( 9/32) installing libdmapsharing [----------------------] 100%
(10/32) installing mutagen [----------------------] 100%
(11/32) installing libgpod [----------------------] 100%
Optional dependencies for libgpod
gtk-sharp-2: Mono bindings
(12/32) installing libmtp [----------------------] 100%
(13/32) installing libdiscid [----------------------] 100%
(14/32) installing libmusicbrainz3 [----------------------] 100%
(15/32) installing gobject-introspection [----------------------] 100%
(16/32) installing libpeas [----------------------] 100%
Optional dependencies for libpeas
gjs: gobject-based plugin engine - gjs runtime loader
seed: gbject-based plugin engine - seed runtime loader
(17/32) installing icu [----------------------] 100%
(18/32) installing aspell [----------------------] 100%
==> aspell comes with no default dictionary
Optional dependencies for aspell
perl: to import old dictionaries
(19/32) installing hunspell [----------------------] 100%
Optional dependencies for hunspell
perl: for ispellaff2myspell
(20/32) installing hspell [----------------------] 100%
(21/32) installing enchant [----------------------] 100%
(22/32) installing libwebkit3 [----------------------] 100%
(23/32) installing media-player-info [----------------------] 100%
(24/32) installing mx [----------------------] 100%
(25/32) installing pygobject-devel [----------------------] 100%
(26/32) installing python2-gobject [----------------------] 100%
(27/32) installing python2-markupsafe [----------------------] 100%
(28/32) installing python2-beaker [----------------------] 100%
(29/32) installing python2-mako [----------------------] 100%
(30/32) installing gmime [----------------------] 100%
(31/32) installing totem-plparser [----------------------] 100%
(32/32) installing rhythmbox [----------------------] 100%
Optional dependencies for rhythmbox
gstreamer0.10-ugly-plugins: Extra media codecs
gstreamer0.10-bad-plugins: Extra media codecs
gstreamer0.10-ffmpeg: Extra media codecs
brasero: cd burning
and here is my pacman.conf file.
# /etc/pacman.conf
# See the pacman.conf(5) manpage for option and repository directives
# GENERAL OPTIONS
[options]
# The following paths are commented out with their default values listed.
# If you wish to use different paths, uncomment and update the paths.
#RootDir = /
#DBPath = /var/lib/pacman/
#CacheDir = /var/cache/pacman/pkg/
#LogFile = /var/log/pacman.log
HoldPkg = pacman glibc
# If upgrades are available for these packages they will be asked for first
SyncFirst = pacman
#XferCommand = /usr/bin/curl -C - -f %u > %o
#XferCommand = /usr/bin/wget --passive-ftp -c -O %o %u
#XferCommand = /usr/bin/curl -C - %u > %o
#CleanMethod = KeepInstalled
Architecture = auto
# Pacman won't upgrade packages listed in IgnorePkg and members of IgnoreGroup
#IgnorePkg =
#IgnoreGroup =
#NoUpgrade =
#NoExtract =
# Misc options (all disabled by default)
#UseSyslog
#ShowSize
#UseDelta
TotalDownload
ILoveCandy
CheckSpace
# PGP signature checking
# NOTE: None of this will work without running `pacman-key --init` first.
# The compiled in default is equivalent to the following line. This requires
# you to locally sign and trust packager keys using `pacman-key` for them to be
# considered valid.
#SigLevel = Optional TrustedOnly
# If you wish to check signatures but avoid local sign and trust issues, use
# the following line. This will treat any key imported into pacman's keyring as
# trusted.
SigLevel = Optional TrustAll
# For now, off by default unless you read the above.
#SigLevel = Never
# REPOSITORIES
# - can be defined here or included from another file
# - pacman will search repositories in the order defined here
# - local/custom mirrors can be added here or in separate files
# - repositories listed first will take precedence when packages
# have identical names, regardless of version number
# - URLs will have $repo replaced by the name of the current repo
# - URLs will have $arch replaced by the name of the architecture
# Repository entries are of the format:
# [repo-name]
# Server = ServerName
# Include = IncludePath
# The header [repo-name] is crucial - it must be present and
# uncommented to enable the repo.
# The testing repositories are disabled by default. To enable, uncomment the
# repo name header and Include lines. You can add preferred servers immediately
# after the header, and they will be used before the default mirrors.
#[testing]
## Add your preferred servers here, they will be used first
#Include = /etc/pacman.d/mirrorlist
[core]
# Add your preferred servers here, they will be used first
Include = /etc/pacman.d/mirrorlist
[extra]
# Add your preferred servers here, they will be used first
Include = /etc/pacman.d/mirrorlist
#[community-testing]
## Add your preferred servers here, they will be used first
#Include = /etc/pacman.d/mirrorlist
#[multilib]
## Add your preferred servers here, they will be used first
#Include = /etc/pacman.d/mirrorlist
[community]
# Add your preferred servers here, they will be used first
Include = /etc/pacman.d/mirrorlist
# An example of a custom package repository. See the pacman manpage for
# tips on creating your own repositories.
#[custom]
#Server = file:///home/custompkgs
i searched it but i am not sure i understood it quite very well. anyway thanks for help. and its good to be back !!!

so can anyone of you post your pacman.conf file that is already merged ?? and when i press y when it prompts to import the key it doesn't really import it ! and i dont understand this - i m able to install single package but cant upgrade the system ! okay here is the output -
[hades@Olympians ~]$ sudo pacman -Syu
:: Synchronizing package databases...
core 106.4 KiB 23.1K/s 00:05 [----------------------] 100%
extra 1186.2 KiB 93.1K/s 00:13 [----------------------] 100%
community 1048.9 KiB 114K/s 00:09 [----------------------] 100%
:: Starting full system upgrade...
:: Replace module-init-tools with core/kmod? [Y/n] y
resolving dependencies...
looking for inter-conflicts...
Targets (204): alsa-firmware-1.0.25-1 alsa-lib-1.0.25-1 alsa-oss-1.0.25-1
alsa-utils-1.0.25-1 ati-dri-7.11.2-1 autoconf-2.68-2
automake-1.11.2-1 avahi-0.6.30-6 bash-4.2.020-1
binutils-2.22-4 bison-2.5-3 bzip2-1.0.6-3
ca-certificates-20111211-1 cifs-utils-5.2-1 colord-0.1.16-1
conky-1.8.2git20111107-1 consolekit-0.4.5-2 coreutils-8.15-1
cracklib-2.8.18-2 cryptsetup-1.4.1-1 curl-7.24.0-1
db-5.3.15-1 deadbeef-0.5.1-4 desktop-file-utils-0.19-1
dhcpcd-5.2.12-4 dialog-1.1_20111020-1 dnsutils-9.8.1-2
dosfstools-3.0.12-1 e2fsprogs-1.42-1 enca-1.13-2
eventlog-0.2.12-3 expat-2.0.1-7 fakeroot-1.18.2-1 file-5.10-1
filesystem-2011.12-2 findutils-4.4.2-4
flashplugin-11.1.102.55-1 flex-2.5.35-5 freeglut-2.8.0-1
gawk-4.0.0-2 gcc-4.6.2-6 gcc-libs-4.6.2-6 gdbm-1.10-1
gdk-pixbuf2-2.24.1-1 gettext-0.18.1.1-4
glib-networking-2.30.2-1 glib2-2.30.2-1 glibc-2.15-4
glibmm-2.30.1-1 gmtk-1.0.5-2 gnome-icon-theme-symbolic-3.2.2-1
gnome-keyring-3.2.2-3 gnome-mplayer-1.0.5-1 gnutls-3.0.12-1
gpm-1.20.6-7 grep-2.10-1 groff-1.21-2 grub-0.97-21
gstreamer0.10-bad-0.10.22-3 gstreamer0.10-bad-plugins-0.10.22-3
gstreamer0.10-ffmpeg-0.10.13-1 gstreamer0.10-ugly-0.10.18-4
gstreamer0.10-ugly-plugins-0.10.18-4
gtk-update-icon-cache-2.24.9-1 gtk2-2.24.9-1 gtk3-3.2.3-2
gucharmap-3.2.2-1 gzip-1.4-4 heirloom-mailx-12.5-3
idnkit-1.0-2 inetutils-1.9.1-1 initscripts-2012.01.3-1
intel-dri-7.11.2-1 intltool-0.50.0-1 iproute2-3.2.0-2
iputils-20101006-2 jack-0.121.3-5 jfsutils-1.1.15-3
jshon-20111222-1 keyutils-1.5.5-1 kmod-4-1 krb5-1.9.2-2
lame-3.99.3-1 lcms2-2.3-1 less-444-2 libass-0.10.0-3
libbluray-0.2.1-1 libburn-1.1.8-1 libcap-2.22-2
libcroco-0.6.3-1 libdatrie-0.2.5-1 libdrm-2.4.30-1
libdvdnav-4.2.0-2 libdvdread-4.2.0-1 libevent-2.0.16-1
libgl-7.11.2-1 libglapi-7.11.2-1 libgnome-keyring-3.2.2-1
libgphoto2-2.4.11-1 libgusb-0.1.3-1 libiec61883-1.2.0-3
libjpeg-turbo-1.1.1-4 libldap-2.4.28-2 libpcap-1.2.1-1
libpipeline-1.2.0-2 libpulse-1.1-2 librsvg-2.34.2-1
libsasl-2.1.23-9 libthai-0.1.16-1 libusb-1.0.8-2
libusb-compat-0.1.3-2 libvdpau-0.4.1-2 libxfce4ui-4.8.1-1
libxi-1.4.5-1 libxrandr-1.3.2-2 linux-3.2.2-1
linux-firmware-20111101-1 lirc-utils-1:0.9.0-10
lxappearance-0.5.1-3 m4-1.4.16-2 mach64-dri-7.11.2-1
man-db-2.6.0.2-3 mdadm-3.2.3-1 mesa-7.11.2-1 mga-dri-7.11.2-1
mjpegtools-2.0.0-1 mkinitcpio-0.8.2-1
module-init-tools-3.16-1 [removal] mpfr-3.1.0.p3-1
mpg123-1.13.4-2 mplayer-34426-1 nano-2.2.6-2 ncurses-5.9-2
network-manager-applet-0.9.2.0-1 networkmanager-0.9.2.0-1
nss-3.13.1-2 obmenu-1.0-9 openbox-themes-1.0.2-2
openssl-1.0.0.g-1 p11-kit-0.9-1 pam-1.1.5-2 parted-3.0-4
patch-2.6.1-3 pciutils-3.1.8-1 pcre-8.21-1 perl-5.14.2-7
pixman-0.24.2-1 pkg-config-0.26-2 pm-quirks-0.20100619-2
polkit-0.103-1 poppler-0.18.3-1 poppler-glib-0.18.3-1
popt-1.16-4 ppp-2.4.5-3 python-distutils-extra-2.29-1
python-imaging-1.1.7-4 python2-2.7.2-4 r128-dri-7.11.2-1
raptor-2.0.6-1 readline-6.2.002-1 reiserfsprogs-3.6.21-4
run-parts-4.0.4-1 savage-dri-7.11.2-1 scrot-0.8-5
sdl-1.2.15-1 sed-4.2.1-4 sg3_utils-1.33-1 shadow-4.1.4.3-5
shared-color-profiles-0.1.5-1 sis-dri-7.11.2-1
smbclient-3.6.2-1 sqlite3-3.7.10-1 startup-notification-0.12-2
sysfsutils-2.1.0-7 syslinux-4.05-1 syslog-ng-3.3.4-1
talloc-2.0.7-1 tar-1.26-2 tdfx-dri-7.11.2-1 texinfo-4.13a-7
transmission-gtk-2.42-2 tzdata-2011n-1 udev-179-1
unrar-4.1.4-1 upower-0.9.15-1 util-linux-2.20.1-2
vi-1:050325-2 wavpack-4.60.1-2 which-2.20-5
wireless_tools-29-6 wpa_supplicant-0.7.3-4 x264-20111030-1
xcb-util-0.3.8-1 xf86-input-joystick-1.6.0-3
xf86-video-ati-6.14.3-1 xf86-video-intel-2.17.0-2
xf86-video-vmware-11.1.0-1 xfconf-4.8.1-1 xfsprogs-3.1.7-1
xkeyboard-config-2.5-1 xorg-server-1.11.3-1
xorg-server-common-1.11.3-1 xorg-xinit-1.3.1-2
zathura-0.0.8.5-4
Total Download Size: 7.87 MiB
Total Installed Size: 898.19 MiB
Net Upgrade Size: 20.59 MiB
Proceed with installation? [Y/n] y
:: Retrieving packages from core...
glibc-2.15-4-i686 7.1 MiB 118K/s 01:02 [----------------------] 90%
e2fsprogs-1.42-1-i686 7.9 MiB 118K/s 01:08 [----------------------] 100%
(203/203) checking package integrity [----------------------] 100%
(203/203) loading package files [----------------------] 100%
(203/203) checking for file conflicts [----------------------] 100%
error: failed to commit transaction (conflicting files)
filesystem: /etc/mtab exists in filesystem
Errors occurred, no packages were upgraded.
[hades@Olympians ~]$

When ı install the firefox from this site ı cant setup it because it gives error and it says that it is corrupt

when ı setup the FireFox it is giving error and it says it is corrupt
== when ı want to setup FireFox ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.0; Trident/4.0; GTB6.5; SLCC1; .NET CLR 2.0.50727; .NET CLR 3.0.30618; .NET CLR 3.5.30729; AskTB5.6)

It is possible that your anti-virus software is corrupting the downloaded files or otherwise interfering with downloading files by Firefox.
Try to disable the real-time (live) scanning of files in your anti-virus software temporarily to see if that makes downloading work.
See "Disable virus scanning in Firefox preferences - Windows"
* http://kb.mozillazine.org/Unable_to_save_or_download_files

My iTunes program is giving me a message that says, "Runtime error" and wont open iTunes. How do I fix this?

My iTunes program is giving me a message that says, "Runtime error" and wont open iTunes. How do I fix this?

Try the following user tip:
Troubleshooting issues with iTunes for Windows updates

FM SSF_CLOSE failing and giving error message while printing a smartform

Hi,
for language spanish the smartform is not getting printed for output type SG11 but for english it is getting printed? What could be the reason? I debugged and found that SSF_CLOSE is failing and giving error message.
Thanks and regards,
AP.

Hi Aparajita,
for changing from one languages to another translations in SE63 is to be done, either search on SCN for using SE63 , or atleast see these wiki help .
Transaction SE63 - Translation Tools for Translators (BC-DOC-TTL) - SAP Library
Transaction SE63 (SAP Library - Translation Tools for Translators (BC-DOC-TTL))

Task Manager Not loading Properly. Giving Error No more threads can be created in the System.NAPStatus UI and Some other Task related Errors

I have a problem with the Task Scheduler. It is not opening properly it is giving Error Message box at this time i am unable to post. The Tasks Scheduler is starts with a error alert "No more threads can be created in the System.NAPStatus UI".
I am unable to view the history of the tasks schecduled.It is giving message as
"The user account does not have permission to Access the Task History."
How to fix it. It is frustrating as can't able to track my Tasks and Create new Tasks. Any Suggestions helpful.
Thanks in Advance.
RehaanKhan. M

Hi,
Thanks for your post.
Please check event viewer if there are some error logs?
Meanwhile, there is a similar thread has been discussed:
Receiving error about "no more threads"
http://social.technet.microsoft.com/Forums/windowsserver/en-US/9a9e22e4-d947-4d19-b06c-aaadda624dbc/receiving-error-about-no-more-threads?forum=winservergen
Regards.
Vivian Wang

I'm new to iPad mini and uv I'm trying to get a movie I purchased to where I can watch it offline but when I click the option to download and watch offline it keeps giving me and error with download try again later I have a good wifi connection ??

I'm new to iPad mini and uv I'm trying to get a movie I purchased to where I can watch it offline but when I click the option to download and watch offline it keeps giving me and error with download try again later I have a good wifi connection ??

You have a "good WiFi connection". What does that mean exactly? Can you send and receive email and are other internet related activities working OK for you? Have you tried restarting or rebooting your iPad? Sometimes that helps. If nothing else, it's a good place to start.
Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

Query Saving takes long time and giving error

Hi Gurus,
I am creating one query that have lot of calculations (CKF & RKF).
When I am trying to save this query it is taking long time and it is giving error like RFC_ERROR_SYSTEM_FAILURE, Query Designer must be restarted, further work not possible.
Please give me the solution for this.
Thanks,
RChowdary

Hi Chowdary,
Check the following note: 316470.
https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=316470
The note details are:
Symptom
There are no authorizations to change roles. Consequently, the system displays no roles when you save workbooks in the BEx Analyzer. In the BEx browser, you cannot move or change workbooks, documents, folders and so on.
Other terms
BW 2.0B, 2.0A, 20A, 20B, frontend, error 172, Business Explorer,
RFC_ERROR_SYSTEM_FAILURE, NOT_AUTHORIZED, S_USER_TCD, RAISE_EXCEPTION,
LPRGN_STRUCTUREU04, SAPLPRGN_STRUCTURE, PRGN_STRU_SAVE_NODES
Reason and Prerequisites
The authorizations below are not assigned to the user.
Solution
Assign authorization for roles
To assign authorizations for a role, execute the following steps:
1. Start Transaction Role maintenance (PFCG)
2. Select a role
3. Choose the "Change" switch
4. Choose tab title "Authorizations"
5. Choose the "Change authorization data" switch
6. Choose "+ Manually" switch
7. Enter "S_USER_AGR" as "Authorization object"
8. Expand "Basis: Administration"/"Authorization: Role check""
9. From "Activity" select "Create or generate" and others like "Display" or "Change"
10. Under "Role Name", enter all roles that are supposed to be shown or changed. Enter "*" for all roles.
11. You can re-enter authorization object "S_USER_AGR" for other activities.
Assign authorization for transactions
If a user is granted the authorization for changing a role, he/she should also be granted the authorization for all transactions contained in the role. Add these transaction codes to authorization object S_USER_TCD.
1. Start the role maintenance transaction (PFCG).
2. Select a role.
3. Click on "Change".
4. Choose the "Authorizations" tab.
5. Click on "Change authorization data".
6. Click on "+ manually".
7. Specify "S_USER_TCD" as "Authorization object".
8. Expand "Basis - Administration"/"Authorizations: Transactions in Roles".
9. Under "Transaction", choose at least "RRMX" (for BW reports), "SAP_BW_TEMPLATE" (for BW Web Templates), "SAP_BW_QUERY" (for BW Queries and/or "SAP_BW_CRYSTAL" (for Crystal reports) or "*". Values with "SAP_BW_..." are not transactions, they are special node types (see transaction code NODE_TYPE_DEFINITION).
Using the SAP System Trace (Transaction ST01), you can identify the transaction that causes NOT_AUTHORIZED.
Prevent user assignment
Having the authorization for changing roles, the user is not only able to change the menu but also to assign users. If you want to prevent the latter, the user must loose the authorization for Transactions User Maintenance (SU01) and Role maintenance (PFCG).
Z1>Note
Refer to Note 197601, which provides information on the different display of BEx Browser, BEx Analyzer and Easy Access menu.
Please refer to Note 373979 about authorizations to save workbooks.
Check in the transaction ST22 for more details on the Query designer failure or query log file.
With Regards,
Ravi Kanth.
Edited by: Ravi kanth on Apr 9, 2009 6:02 PM

USB is not recognizing the device and giving error 10

My PC USB is not recognizing the device (iphone) and giving error 10.. The USb is malfunctioning but ipod is getting connected easliy

Try DFU Mode Restore. Open iTunes on computer. Connect iPhone to computer with USB cable. Hold both Home and Power button, after exactly 10 seconds release the Power Button, keep holding the Home button until iTunes recognizes iPhone in Recovery Mode, usually about 20 seconds time. If the iPhone screen is black, blank this is DFU Mode. Click the Restore button of iTunes.

Adstpall.sh and adstrtal.sh scripts is giving error in R12

Team,
I am trying to start and stop the services using adstpall.sh and adstrtal.sh but its giving error.
-bash-3.00$ sh adstpall.sh
You are running adstpall.sh version 120.10.12010000.4
Enter the APPS username: apps
Enter the APPS password:
adstpall.sh: Database connection could not be established. Either the database is down or the APPS credentials supplied are wrong.
USAGE: adstpall.sh <appsusername/appspassword>
adstpall.sh <applications_username/applications_password> -secureapps
adstpall.sh -nodbchk
adstpall.sh: exiting with status 1
-bash-3.00$ sh adstrtal.sh
You are running adstrtal.sh version 120.15.12010000.3
Enter the APPS username: apps
Enter the APPS password:
adstrtal.sh: Database connection could not be established. Either the database is down or the APPS credentials supplied are wrong.
USAGE: adstrtal.sh <appsusername/appspassword>
adstrtal.sh <applications_username/applications_password> -secureapps
adstrtal.sh -nodbchk
adstrtal.sh: exiting with status 1
But I am able to login to DB with the same.
-bash-3.00$ sqlplus apps/apps
SQL*Plus: Release 10.1.0.5.0 - Production on Sat Mar 26 09:29:27 2011
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Connected to:
Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
SQL> select name from v$database;
NAME
R1212112
SQL> select banner from v$version;
BANNER
Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - Production
PL/SQL Release 11.2.0.2.0 - Production
CORE 11.2.0.2.0 Production
TNS for Linux: Version 11.2.0.2.0 - Production
NLSRTL Version 11.2.0.2.0 - Production
Autoconfig on the Apps tier and Db tier is completing successfully without any issues.
COuld you please help me in rectifying the issue.

Hi Srini,
I tried the below but It didnt work:
/slot/ems6596/appmgr/inst/apps/r1212112_rws60007rems/admin/scripts
-bash-3.00$ adstpall.sh apps/apps
You are running adstpall.sh version 120.10.12010000.4
adstpall.sh: Database connection could not be established. Either the database is down or the APPS credentials supplied are wrong.
USAGE: adstpall.sh <appsusername/appspassword>
adstpall.sh <applications_username/applications_password> -secureapps
adstpall.sh -nodbchk
adstpall.sh: exiting with status 1
-bash-3.00$ adstpall.sh
You are running adstpall.sh version 120.10.12010000.4
Enter the APPS username: apps
Enter the APPS password:
adstpall.sh: Database connection could not be established. Either the database is down or the APPS credentials supplied are wrong.
USAGE: adstpall.sh <appsusername/appspassword>
adstpall.sh <applications_username/applications_password> -secureapps
adstpall.sh -nodbchk
adstpall.sh: exiting with status 1
Any help into this.

Flash10c.ocx is giving errors and is nowhere to be found.

Similar Messages

Maybe you are looking for