Flashed Z87 GD65 using Mflash, now system wont restart properly

ok so I updated to latest 1.B aka v1.1. I updated it to install a 4790k but didn't realize I wasn't meant to use M flash
the system runs fine, but will not restart correctly. just blank screens
ive downloaded the forum flasher & made a bootable usb stick.
now im seeing NPT method etc & im lost on what to actually do? whats fast boot & win 8 options mean too, bios settings?
I have the 1.b file but will it still flash? I don't want to brick it
pls help!
edit I reflashed the 1.B file using the forum flasher & still have the same issue
system specs are
4790k
16gb gskill ddr3 1600, I have tried setting the ram to correct timings too
3x r9 280x
240gb corsair force 3
1000w EVGA P2
what else can it be? it ran fine before I updated the bios & changed the cpu

Hi,
Quote:
>>Use the MSI HQ Forum USB flasher<<
A.) Download the attached archive (E7888IMS_150.rar) and place it on your desktop. Do not decompress.
B.) Download and install the Forum flash tool.
C.) Insert your FAT32 formatted usb stick.
D.) Make sure that all win 8 options are disabled. (Fast Boot etc) Also make sure the legacy USB is enabled.
E.) Start the forum flash tool and select option 1. Then point the tool at the compressed archive we downloaded earlier. Then to your USB Flash Drive.
F.) Boot to the USB from working bios.
G.) Once it booted successfully switch to the bad bios without powering down or rebooting
H.) Now follow the directions and let the tool flash the bad bios with 1.5
I.) After flashing reinstall ME drivers in Windows: http://download.msi.com/dvr_exe/intel_me10_mb.zip
Read few times if not understood
Ignore name of files mentioned in instructions, but use those from below.
But download latest OFFICIAL BIOS file from here:
https://forum-en.msi.com/index.php?topic=169827.msg1262015#msg1262015
[E7845IMS.160]
If you want, you can try latest which will be this one:
https://forum-en.msi.com/index.php?topic=169827.msg1308776#msg1308776
[E7845IMS.1B2]
If BIOS A is already bricked, you won't damage it by trying above.

Similar Messages

HT201210 I disconnected my iPhone in the middle of an iTunes update. Now it wont run properly what do I do?

I disconnected my iPhone in the middle of an iTunes update. Now it wont run properly what do I do? I was working online and I recieved a pop up from iTunes stating that there was an harwared update for my iPhone. I had it plugged up for a while , long enoung for me to watch a tv show have dinner and come back. I thought the update was complete and came back to the computer and unplugged it. The next morning I saw a picture of aUSB cord and the iTunes icon. I have no use of my phone and cannot get access to emails, internet contacts..nothing . Help !

Well it should NEVER be unplugged when doing something.
It actually had not installed the software at that stage, it had been copied over to the iPhone, it was being checked and then it would be installed.
You need to connect your iPhone to the computer at home and hope that you can install the software again and then restore your backup.
If you install iTunes at work you may be able to Restore the software but you will most likely lose the content on your iPhone as you do not have a backup to restore on that computer, or all your media / apps.

Flashed new bios V1.10 , now Pc wont load past windows loading sceen.HELP

hi i have a neo-f p965, i flashed the bios today to the new update v.1.10. now my pc wont load past the windows loading screen, it just reboots every time.
i want to go back to a older bios version if posible. can anybody help me, this is a disaster if i cannot get it to work.
many thanks
Noel.

Get this.
Select your motherboard. Then click BIOS, download previous version.
Rest is simple.
Or you can stick with the 1.1 BIOS and reinstall Windows.

Z87-GD65 - using onboard video card istead of PCI-E GPU

hello guys,
i have installed a GPU with this MB, but i would like to use the MB onboard video instead.
the GPU is working fine - but i am using it for processing parallelised code, and i do not want to use it for graphics.
is there an option in the BIOS that i can set to make this possible?
thanks,

hi
just checking..
am i to believe that there is no way of using the on-board graphics if a GPU is installed on the board?
thanks

Hi, ive made a project using idvd, and it wont burn properly

and when i go to burn it to a dvd, it plays properly with music and everything , it goes throught he motions of burning it, then chucks it out a minute before it finishes, and the disk is empty, there are no warning signs anywhere, so just wondered if someone could help a first time idvd user;-)) thanks

That use to be either
• Cheap DVDs e.g. Memorex, NoName etc. - I only use Verbatim DVD-R
• Dusty DVD laser lens - I use a Cleaning DVD from time to time
Else
• Trash iDVD pref file
• Run Repair Permissions
Not knowing the origin to Your problem - General approach when in trouble is as follows.
• Delete iDVD pref. file - or rather start a new user/account - log into this and re-try
iDVD pref. file resides.
Mac Hard Disk (start-up HD)/Users/"Your account"/Library/Preferences
and is named.
com.apple.iDVD.plist
While iDVD is NOT RUNNING - move this file out to desk-top.
Now restart iDVD.
• Free space on internal (start-up) hard disk if it is less than 10Gb should rather have 25Gb
• Disconnect all external hard disks and try - FireWire, USB/2, AirPort or Net-work connected.
To work OK I prefer FireWire AND it must be Mac OS Extended formatted -
UNIX/DOS/FAT32/Mac OS Exchange - WILL NOT DO for video -
neither for iMovie or FinalCut or iDVD any version !
This also includes any USB-memory sticks.
• Hard disk is untidy. Repair Permissions, Repair Hard disk (Apple’s Disk Utilities application)
• Program miss-match. iDVD 5.0.2, Mac OS X.4.11 AND QuickTime 7.5.5 - is OK - DON’T work under Leopard
• Program miss-match. iDVD 6.0.4, Mac OS X.4.11 AND QuickTime 7.5.5 - is OK (might work under Leopard)
• Program miss-match. iDVD’08 v. 7.0.1, Mac OS X.4.11 AND QuickTime 7.5.5 - is OK will work under Leopard)
• Program miss-match. iDVD’09 v. 7.0.4, Mac OS X.5.8 AND QuickTime 7.6.4 - is OK (does work under Leopard)
• iDVD (08) v7 Locate theme folder. Move out iDVD1, iDVD 2 and eventually iDVD4 folders to desktop - re-try
Macintosh HD/Library/Application Support/iDVD/Themes/ zzzzzzzzzz
or
Macintosh HD/Users/Your log-in//Library/Application Support/iDVD/Installed Themes/ zzzzzzzzzz
• Try a Cleaning CD/DVD that cleans the laser lens on the DVD burner/player
iDVD 6.0.4 and iDVD 7.0.1 are compatible with Mac OS X 10.5 Leopard
Last resort. from Craig. Solved the problem ! ! Finally ! !
I deleted every iDVD application and folder from my boot drive,
emptied the trash and then installed iDVD 08 using the customize option
and I am up and running.
If You do a re-install be sure to get rid of all iDVD old parts AND then EMPTY the Trash-basket !
iDVD updated ?
Apple Codec updated ?
Start a New Clean project - or delete project assets
No of Colors - must be set to millions
EdinSF writes that, The 10.6.3 update with an Open GL fix seems to have taken care of the problem.
Yours Bengt W

I spilled some water on my laptop, the screen went dark so I turned it off. Now it wont restart. Have I ruined it completely?

I spilled some water on my laptop, the screen went dark so I turned it off. Now it won't restart.
Have I ruined it completely or will it come back on after it dries out?

Take it in for repair ASAP. The longer you wait the worse it can get.

MSI Z87-GD65 Turned off and won't restart

This is the second time the computer shut down while it was being used and wouldn't restart. The first time was nearly 4 months ago, and the computer went unused for 4 months until I had the time and money get repaired. I brought it to the computer store to be repaired, they cleaned it with a blower and it turned on without a problem, seemingly NOTHING was wrong. A week later it has happened again! I've tried everything, disconnected all peripheral, reseated the memory, even did a CMOS reset, and it will not start. The power light is on, and even the OC light comes on, but it never starts and the CPU fan doesn't even turn on.
I tried disconnecting one of the power's as suggested @ https://forum-en.msi.com/index.php?topic=175399.0 but that didn't work either.
Tried the paper clip test and it failed, 1100 strike X power supply... It may be the power supply, but since I used a wire instead of a paper clip there's no way for me to know, I can't seem to locate a paper-clip.

Have you tried it with a different power supply? It already sounds like you are thinking that the power supply might be at fault.

Duces ex. stopped downloading half way through and now it wont restart.

i was downloading this game. i walked away for a while and when i came back it ahd stopped downloading and it was not installed. in the app store under purchases, i clicked the install button. it tried to restart the download, but afer a minuet or so i get a popu[ telling me that the app failed to download. whats the deal how do i get this download to finish?

I have the same issue just keeps stopping....?

My hp omni 120 wont restart properly freezes on startup and wont power down properly

Has anyone this problem occur I have to pull the power chord just to get the computer to restart if I manually do it it shutdowns and when it goes to restart the screen stays black the fan runs and the power button continues to stay on When I hold the power button it cuts off and then turns right back on with a black screen sometimes when it boots I get to the desktop it freezes immediately after it gets to the desktop and sometimes while im just browseing the internet any help?

Hello devon_cook,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I understand that you are having issues with your computer not shutting down correctly. I would be happy to assist you, but first I would encourage you to post which operating system you are using. And whether your operating system is 32-bit or 64-bit as with this I can provide you with accurate information.
Which Windows operating system am I running?
Is the Windows Version on My Computer 32-bit or 64-bit?
Please re-post with the requested information and I would be happy to provide you with assistance. Thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

MSI Z87-GD65 System. Slower Download speeds since upgrade.

I've recently upgraded my PC to an MSI Z87-GD65/i5-4670K based system from an Core 2 Quad, Win 7 64x setup.
I use Usenet frequently and since upgrading i seem to have lost around 1000KB/s in download speed when maxing out my line.
Before, i used to get around 9140KB/s max download using the onboard lan port on a Gigabyte P45 based motherboard. Port on old board was a Realtek 8111C Gigabyte chip.
Now i get around 8200KB/s max download using the onboard lan port on my MSI Z87-GD65 motherboard which is the Killer E2205 chip.
I'm using the latest Lan drivers for my chip and have tried older ones but come up with the same result.
Is there an obvious reason behind this speed loss? What i'm wondering is does Windows 8.1 constantly use the network to keep the app tiles updated and if so would it account for 1000KB/s of missing speed. If so, is there a way of stopping it using the network when I'm downloading stuff?
I don't think the speed difference is due to the different chipsets because i get the same speeds using various speed tests that i did before. Also i know its not a massive amount of speed loss (it's equivalent to 8Mbps) but its annoying me.
Anyone have any ideas? Thanks.

Hi, thanks for your reply.
My specs are as follows:-
i5-4670k
MSI Z87- GD65
16gb Crucial Elite 1866 using X.M.P
250GB Samsung 840 EVO SSD
MSI GTX770 2GB
Corsair HX850w PSU
Windows 8.1 Pro
I have no Wifi card or software installed so i'm just using the onboard ethernet.
Current download speeds shown in Speedtest.net is 74 Down 19 Up, however the Usenet speed i'm getting is around 64 Down (8200KB/s). Difference of 10Mbps. Ive checked settings on the Usenet provider side and they are correct.

HT1430 iphone 3g crashed...wont restart

i tried reseting my iphone 3g and now it wont restart at all
what do i do?

What have you tried so far?

My apple is not activating,Asking for Apple ID &p.word, I have entered the apple ID which i was using to download all apps,but it wont work, Now system is saying that your apple Id is wrong, My question is Can there be two apple IDs?

My apple is not activating,Asking for Apple ID &p.word, I have entered the apple ID which i was using to download all apps,but it wont work, Now system is saying that your apple Id is wrong, My question is Can there be two apple IDs? My apple ID is my Yahoo mail it self, but not able to log in to Icloud, Can any body guide, Why, I can not.

Hi dip_kinu,
I apologize, I'm a bit unclear on exactly what device you are trying to set up and what is happening when you try to do so. If you are having issues remembering your Apple ID, or feel like you may have set up multiple Apple ID's, you may find the following page helpful:
Apple - My Apple ID: Find your Apple ID
https://iforgot.apple.com/appleid
Regards,
- Brenden

Z87-GD65 can't use 3TB disk drives on Intel SATA ports

I've been happily using my Z87-GD65 for several months now with a 256G SSD for Windows 8.1, and 4*2T spinning Seagate drives. I decided it was time to make 'em bigger. So I plugged in a 3TB Seagate ST3000DM001 on one of the Intel SATA ports. The motherboard doesn't recognize there's a drive there at all. If I go ahead and boot, it's very slow to come up and Windows does recognize the drive, but it's unusably slow and eventually just hangs.
Ok... Flash the BIOS on the disk. No better.
Flash the MB BIOS. No better.
Plug in a WD 3T Red drive. Same exact symptoms.
Try different Intel SATA ports. Same symptoms.
Both drives work fine on two other completely different systems (both old LGA1155 systems).
Plug the drive in to the ASM1061 ports on the Z87-GD65 and poof... works like a champ. 170MB/sec from the Seagate, 150MB/sec from the WD.
Well, that's something, but I had intended to replace the 4*2T drives with 4*3T drives. Using the ASM ports is not the answer.
I checked the hard disk drive test report and it claims the ST3000DM001 was tried and works. So I'm pretty stumped. Old MB BIOS didn't work, new MB BIOS doesn't work, old Seagate firmware doesn't work, new Seagate firmware doesn't work, WD doesn't work, multiple ports don't work.
Surely other people are using large drives on these MB's.
Hints?

It does help knowing other people are getting the same hardware to work. Gives me hope.
My first thought was "ain't no way it's the OS" since the MB isn't showing the drives on the display of SATA devices. But just to do a quick check I slipped in a Fedora drive and booted and wow... no problems at all with using the 3T drives. Motherboard still claims no knowledge of them, but Fedora uses 'em fine.
ok... Update the Intel chipset drivers and the IRST and reboot and... it's better. Still broken, but better. Takes about a minute to boot instead of the usual 12 seconds, but once it's up it's working ok best I can tell. So it's getting hung up on something during boot.
Fine... reset the CMOS, PITA though that is since I have to yank the SLI graphics card to get to it.
Put it back together, boot, and... Windows won't boot.
I'm about ready to throw a tantrum but get it together and just start trying things. Yank all the drives but the SSD. No. Boot from Fedora. No. Yank the second graphics card. YES! Put it back in again. YES! Guess I didn't get it seated right the first time, or something. Sure felt ok going in, but I won't argue with results.
Boot W8.1 and... bingo... up in 11 seconds with 3*3T drives in it. And the CMOS claims to see the drives now.
Stripe 'em in Windows software and CrystalMark says it can read 490MB/s and write 450MB/s.
That'll do. Thanks.

HT201407 during a update of apple my iphone 3GS crashed an now the operating system wont load up..ive tried to reset the phone to the factory settings it took 4 hours an completed but my iphone still wont come on..what can i do to fix the problem? please

during a update of apple my iphone 3GS crashed an now the operating system wont load up..ive tried to reset the phone to the factory settings using itunes it took 4 hours and completed but my phone still wont come on..what can i do to fix the problem? please help #

In trying to include what information all that I could I should have specified I DON'T KNOW THAT IT WAS DEFINATELY JAILBROKEN when I took it to the apple store they told me there's no way for them to tell if it was jail broken or not. I'm only going by what ppl have told me COULD HAVE BEEN DONE TO THE PHONE. With that said the only thing I know for sure is that the apple tech at the Genius Bar told me that someone took control of my root menu in February & I've had no control of my phone since. I asked him how to regain control & how he knew his exact words were "oh that is out of our scope of capabilities here at this level & you would need an apple engineer to fix it". I said ok then how do I get an apple eng then? He laughed & said you can't!!!! To which I was furious I came home & called apple requesting to speak w/the fraud dept to file a report they said we don't have a fraud dept!! So after a 45 mn phone call again I left w/no answers.
@TJBUSMC1973-
I DON'T HAVE THOUSANDS OF DOLLARS TO SPEND HIRING AN ATTORNEY & Although I appreciate your suggestion I fail to how an attorney would be able to facilitate in any way since there's no suspect. I cannot prove that it's him doing it so I certainly can't pursue legal action w/no proof & no money. :'((
Again I thank you for your advice but I don't think that will help.
I was looking more for a TECHNICAL way to avoid this happening w/a new phone should I buy one or trying to get them out of my phone now! Such as installing some kind of software protection?? Someway to clear out the entire phone (other than factory reset which was done 10 x's w/no success, etc. if this person got in then there HAS TO BE A WAY OF GETTING HIM OUT, right????

Hi there, i installed a system update earlier on my MacBookPro and now it wont connect to wi-fi, working through Network Diagnostics hasn't solved the issue. all other devices here are connecting normally. any ideas?

hi there, i installed a system update earlier on my MacBookPro and now it wont connect to wi-fi, working through Network Diagnostics hasn't solved the issue. all other devices here are connecting normally. any ideas?

Hi, this has worked for a few...
Make a New Location, Using network locations in Mac OS X ...
http://support.apple.com/kb/HT2712
10.7 & 10.8…
System Preferences>Network, top of window>Locations>Edit Locations, little plus icon, give it a name.
10.5.x/10.6.x/10.7.x instructions...
System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
The interface that connects to the Internet should be dragged to the top of the list.
10.4 instructions...
Is that Interface dragged to the top of Network>Show:>Network Port Configurations.
If using Wifi/Airport...
Instead of joining your Network from the list, click the WiFi icon at the top, and click join other network. Fill in everything as needed.
For 10.5/10.6/10.7/10.8, System Preferences>Network, unlock the lock if need be, highlight the Interface you use to connect to Internet, click on the advanced button, click on the DNS tab, click on the little plus icon, then add these numbers...
208.67.222.222
208.67.220.220
Click OK.

Flashed Z87 GD65 using Mflash, now system wont restart properly

Similar Messages

Maybe you are looking for