Flashes from apple screen to blue screen after latest update.

After I updated last night my phone would never reboot. Goes from screen with apple on it for several minutes then flashes to a blue screen for a second then back to apple screen. I tried hooking up to computer but its like nothing is hooked up. Help!

Hi marston44,
It sounds as if you have experienced an issue with updating the operating system on your iPhone. Let's see if we can get you up and running.
I would suggest that you troubleshoot using the steps in this article -
If you can't update or restore your iPhone, iPad, or iPod touch
Thanks for using Apple Support Communities.
Best,
Brett L

Similar Messages

My early 2008 Macbook Pro is suffering from black screen after Yosemite update

My early 2008 Macbook Pro is suffering from black screen after Yosemite update. It ran beta 5 great but failed on restart after beta 6 install. There is no cursor but I can hear the HDD spooling up. I have tried booting in safe mode, PRAM reset and SMC reset but nothing works. After the first 5 days of every now and then trying to start it, it started fine. I used the machine all day with no problems, it had rolled back the install and was back on beta 5. I decided to try the update again, the same thing happened and it has stayed black for over a week now. It wont work with a monitor either. Help!

Hello Adam,
I would try instead of installing the beta software, to install the official build of OS X Yosemite from the Mac App Store to see if that gets you passed the no video issue when updating the beta software.
How to install OS X Yosemite on your Mac
http://support.apple.com/en-us/HT6412
Regards,
-Norm G.

Imac 5k stuck on apple logo screen after latest update

Hi - i have a magazine deadline and a major issue:
i've been having loads of kernel panics (see thread here Brand new imac 5k kernel panic) and having seen there was a new update figured it would be worth installing it to see if it fixed them as nothing so far suggested by apple support has helped. Once it had downloaded the update the OS said it needed to reboot to finish installation. It got half way through the loading bar on the apple logo screen and got stuck. I left it an hour, came back still nothing. Left it another hour and it was still just stuck half way. I rebooted into diagnostics and ran that and it said everything was fine but further reboots just get as far as halfway through the bar. I'm now stuck as the computer was only a month or so old and i hadn't yet set up back up on it. I was still in the process of getting everything configured and over from my old machine. Problem is I have a bunch of photos that were transferred on to it that i shot 2 weeks ago and I need them for a magazine deadline tomorrow and apple support options could only call me back on Thursday - if anyone can suggest anything i will be VERY grateful. I've already tried SMC and PRAM resets.

I did that, a fresh OS install and it worked for about 4 hours then i got a kernel panic
Anonymous UUID:       DE8E807F-E592-FD5D-3D3B-73B0BCCE57D4
Fri May 1 00:30:12 2015
*** Panic Report ***
panic(cpu 0 caller 0xffffff8018f6bf28): "a freed zone element has been modified in zone kalloc.64: expected 0xdeadbeefdeadbeef but found 0xdead9eefdeadbeef, bits changed 0x200000000000, at offset 40 of 64 in element 0xffffff80647c1c00, cookies 0x3f0011bcd6adda0a 0x53521f311ca5c19"@/SourceCache/xnu/xnu-2782.20.48/osfmk/kern/zalloc.c:496
Backtrace (CPU 0), Frame : Return Address
0xffffff83c1ef3730 : 0xffffff8018f2bda1
0xffffff83c1ef37b0 : 0xffffff8018f6bf28
0xffffff83c1ef38e0 : 0xffffff8018f34601
0xffffff83c1ef3910 : 0xffffff801945c513
0xffffff83c1ef3950 : 0xffffff801945f027
0xffffff83c1ef3980 : 0xffffff80194e958c
0xffffff83c1ef39f0 : 0xffffff80194e90d2
0xffffff83c1ef3a50 : 0xffffff7f9a79dcf6
0xffffff83c1ef3ad0 : 0xffffff7f9a7a25e8
0xffffff83c1ef3b20 : 0xffffff7f9a7a3350
0xffffff83c1ef3b60 : 0xffffff80195017cf
0xffffff83c1ef3bc0 : 0xffffff80194ff0c3
0xffffff83c1ef3d00 : 0xffffff8018fe21e7
0xffffff83c1ef3e10 : 0xffffff8018f3000c
0xffffff83c1ef3e40 : 0xffffff8018f149f3
0xffffff83c1ef3e90 : 0xffffff8018f2531d
0xffffff83c1ef3f10 : 0xffffff80190031ea
0xffffff83c1ef3fb0 : 0xffffff8019035396
      Kernel Extensions in backtrace:
         com.apple.iokit.IOAcceleratorFamily2(156.14)[BE7D765B-49C1-34F9-B75E-3EAF8A4062 A3]@0xffffff7f9a786000->0xffffff7f9a7f4fff
            dependency: com.apple.iokit.IOPCIFamily(2.9)[52E715FC-521D-3869-B2EA-5228FA4BEA34]@0xffffff 7f99724000
            dependency: com.apple.iokit.IOGraphicsFamily(2.4.1)[82EAD591-67E3-39CB-A232-A8095CA30E92]@0 xffffff7f9a72b000
BSD process name corresponding to current thread: WindowServer
Mac OS version:
14D136
Kernel version:
Darwin Kernel Version 14.3.0: Mon Mar 23 11:59:05 PDT 2015; root:xnu-2782.20.48~5/RELEASE_X86_64
Kernel UUID: 4B3A11F4-77AA-3D27-A22D-81A1BC5B504D
Kernel slide:     0x0000000018c00000
Kernel text base: 0xffffff8018e00000
__HIB text base: 0xffffff8018d00000
System model name: iMac15,1 (Mac-42FD25EABCABB274)
System uptime in nanoseconds: 19669481944459
last loaded kext at 1177984628424: com.apple.filesystems.ntfs 3.12 (addr 0xffffff7f9c01d000, size 376832)
last unloaded kext at 1401779154535: com.apple.filesystems.ntfs 3.12 (addr 0xffffff7f9c01d000, size 360448)
loaded kexts:
com.apple.filesystems.smbfs 3.0.1
com.apple.filesystems.afpfs 11.0
com.apple.nke.asp-tcp 8.0.0
com.apple.driver.AppleBluetoothMultitouch 85.3
com.apple.driver.AudioAUUC 1.70
com.apple.filesystems.autofs 3.0
com.apple.iokit.IOUserEthernet 1.0.1
com.apple.iokit.IOBluetoothSerialManager 4.3.4f4
com.apple.driver.AppleUpstreamUserClient 3.6.1
com.apple.driver.AGPM 110.19.5
com.apple.driver.X86PlatformShim 1.0.0
com.apple.driver.ApplePlatformEnabler 2.2.0d4
com.apple.driver.AppleGraphicsDevicePolicy 3.7.7
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AppleMikeyHIDDriver 124
com.apple.kext.AMDFramebuffer 1.3.2
com.apple.driver.AppleIntelHD5000Graphics 10.0.6
com.apple.driver.AppleHWAccess 1
com.apple.driver.AppleOSXWatchdog 1
com.apple.driver.AppleHDA 272.18
com.apple.driver.AppleMikeyDriver 272.18
com.apple.AMDRadeonX4000 1.3.2
com.apple.driver.AppleHV 1
com.apple.driver.AppleThunderboltIP 2.0.2
com.apple.driver.AirPort.Brcm4360 930.37.3
com.apple.iokit.AppleBCM5701Ethernet 10.1.3
com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 4.3.4f4
com.apple.driver.AppleSMCLMU 2.0.7d0
com.apple.driver.AppleLPC 1.7.3
com.apple.kext.AMD7000Controller 1.3.2
com.apple.driver.AppleIntelFramebufferAzul 10.0.6
com.apple.driver.AppleIntelSlowAdaptiveClocking 4.0.0
com.apple.driver.AppleMCCSControl 1.2.11
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 36
com.apple.driver.AppleUSBHub 705.4.2
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.7.1
com.apple.driver.AppleSDXC 1.6.5
com.apple.driver.AppleAHCIPort 3.1.2
com.apple.driver.AppleUSBXHCI 710.4.11
com.apple.driver.AppleRTC 2.0
com.apple.driver.AppleACPIButtons 3.1
com.apple.driver.AppleHPET 1.8
com.apple.driver.AppleSMBIOS 2.1
com.apple.driver.AppleACPIEC 3.1
com.apple.driver.AppleAPIC 1.7
com.apple.nke.applicationfirewall 161
com.apple.security.quarantine 3
com.apple.security.TMSafetyNet 8
com.apple.iokit.IOSCSIBlockCommandsDevice 3.7.5
com.apple.iokit.IOUSBMassStorageClass 3.7.2
com.apple.security.SecureRemotePassword 1.0
com.apple.driver.IOBluetoothHIDDriver 4.3.4f4
com.apple.driver.AppleMultitouchDriver 263.9.1
com.apple.kext.triggers 1.0
com.apple.iokit.IOSerialFamily 11
com.apple.iokit.IOSurface 97.4
com.apple.driver.AppleGraphicsControl 3.10.22
com.apple.driver.DspFuncLib 272.18
com.apple.kext.OSvKernDSPLib 1.15
com.apple.iokit.IONDRVSupport 2.4.1
com.apple.iokit.IO80211Family 730.60
com.apple.iokit.IOEthernetAVBController 1.0.3b3
com.apple.driver.mDNSOffloadUserClient 1.0.1b8
com.apple.iokit.IONetworkingFamily 3.2
com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.3.4f4
com.apple.iokit.IOBluetoothFamily 4.3.4f4
com.apple.driver.AppleHDAController 272.18
com.apple.iokit.IOHDAFamily 272.18
com.apple.iokit.IOAudioFamily 203.3
com.apple.vecLib.kext 1.2.0
com.apple.driver.AppleSMBusPCI 1.0.12d1
com.apple.kext.AMDSupport 1.3.2
com.apple.driver.X86PlatformPlugin 1.0.0
com.apple.driver.AppleSMC 3.1.9
com.apple.driver.IOPlatformPluginFamily 5.9.1d7
com.apple.AppleGraphicsDeviceControl 3.10.22
com.apple.iokit.IOAcceleratorFamily2 156.14
com.apple.iokit.IOSlowAdaptiveClockingFamily 1.0.0
com.apple.driver.AppleSMBusController 1.0.13d1
com.apple.iokit.IOGraphicsFamily 2.4.1
com.apple.driver.AppleThunderboltEDMSink 4.0.2
com.apple.iokit.IOUSBUserClient 705.4.0
com.apple.iokit.IOSCSIArchitectureModelFamily 3.7.5
com.apple.driver.AppleUSBHIDKeyboard 176.2
com.apple.driver.AppleHIDKeyboard 176.2
com.apple.iokit.IOUSBHIDDriver 705.4.0
com.apple.driver.AppleUSBMergeNub 705.4.0
com.apple.driver.AppleUSBComposite 705.4.9
com.apple.driver.CoreStorage 471.20.7
com.apple.driver.AppleThunderboltDPInAdapter 4.0.6
com.apple.driver.AppleThunderboltDPOutAdapter 4.0.6
com.apple.driver.AppleThunderboltDPAdapterFamily 4.0.6
com.apple.driver.AppleThunderboltPCIDownAdapter 2.0.2
com.apple.driver.AppleThunderboltNHI 3.1.7
com.apple.iokit.IOThunderboltFamily 4.2.2
com.apple.iokit.IOAHCIFamily 2.7.5
com.apple.iokit.IOUSBFamily 720.4.4
com.apple.driver.AppleEFINVRAM 2.0
com.apple.driver.AppleEFIRuntime 2.0
com.apple.iokit.IOHIDFamily 2.0.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 300.0
com.apple.kext.AppleMatch 1.0.0d1
com.apple.driver.AppleKeyStore 2
com.apple.driver.AppleMobileFileIntegrity 1.0.5
com.apple.driver.AppleCredentialManager 1.0
com.apple.driver.DiskImages 396
com.apple.iokit.IOStorageFamily 2.0
com.apple.iokit.IOReportFamily 31
com.apple.driver.AppleFDEKeyStore 28.30
com.apple.driver.AppleACPIPlatform 3.1
com.apple.iokit.IOPCIFamily 2.9
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.Libm 1
com.apple.kec.corecrypto 1.0
com.apple.kec.pthread 1
Model: iMac15,1, BootROM IM151.0207.B01, 4 processors, Intel Core i7, 4 GHz, 32 GB, SMC 2.22f16
Graphics: AMD Radeon R9 M290X, AMD Radeon R9 M290X, PCIe, 2048 MB
Memory Module: BANK 0/DIMM0, 8 GB, DDR3, 1600 MHz, 0x859B, 0x43543130323436344246313630422E433136
Memory Module: BANK 1/DIMM0, 8 GB, DDR3, 1600 MHz, 0x859B, 0x43543130323436344246313630422E433136
Memory Module: BANK 0/DIMM1, 8 GB, DDR3, 1600 MHz, 0x859B, 0x43543130323436344246313630422E433136
Memory Module: BANK 1/DIMM1, 8 GB, DDR3, 1600 MHz, 0x859B, 0x43543130323436344246313630422E433136
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x142), Broadcom BCM43xx 1.0 (7.15.166.24.3)
Bluetooth: Version 4.3.4f4 15601, 3 services, 27 devices, 1 incoming serial ports
Network Service: Wi-Fi, AirPort, en1
Serial ATA Device: APPLE SSD SM1024F, 1 TB
USB Device: BRCM20702 Hub
USB Device: Bluetooth USB Host Controller
USB Device: FaceTime HD Camera (Built-in)
USB Device: Keyboard Hub
USB Device: Apple Keyboard
USB Device: HD-PCU2
Thunderbolt Bus: iMac, Apple Inc., 26.1

Bookmarks disappeared from home screen after os update

So I readded them and they vanished again, and when I tried again I'm told that they already exist, but they don't. Any thoughts?

Unfortunately we have been unable to reproduce this problem. It is something that users report occasionally. We don't have a known fix.

Mov videos show black screen after latest update (idvd, iweb)

Hi MacUsers,
I am facing a severe problem after updating my MacBook Pro (Mac OS X 10.6.8) with iDVD 7.1.2 and the iWeb Update. I opened a keynote'09 presentation and encountered that most videos do not show up or just show a black box. Then I tried to open the original mov videos with QuickTime Player 10 and 7 but also black screen. Everything worked perfectly before the update. Any ideas how to solve the problem? It is urgent because I have to give a presentation tomorrow. By the way, using VLC works fine, but this does not help me with keynote. Thanks for any answers.
Best - $putnik

Here is a comparable problem described in an older thread:
https://discussions.apple.com/thread/2259769
It seems that there is still a problem with QuickTime. All other players such as MplayerX, VLC or mediAvatar can handle the mov videos (Apple Motion Jpeg A). Is there a solution?
Best - $putnik

New iMac is stuck on grey apple screen after restart from Migration Assistant

New iMac is stuck on grey apple screen after startup. It is a 3.4GHz Quad-core Intel Core i5 running OS 10.9.4. The problem occurred after a migration from my older 2009 iMac which is running Snow Leopard 10.6.6. When the restart occurred from Migration Assistant, the new computer will not boot up to the login screen. Disk utility did not solve problem. Followed instructions for a soft reinstall of Mavericks but that also did not solve problem. Any suggestions?

Take each of these steps that you haven't already tried. Stop when the problem is resolved.
Step 1
The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.
There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later.
b. If Step 1a fails because of disk errors, and no other Mac is available, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, start up from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
c. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
d. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use the technique in Step 1b, 1c, or 1d to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
Step 3
Sometimes a startup failure can be resolved by resetting the NVRAM.
Step 4
If you use a wireless keyboard, trackpad, or mouse, replace or recharge the batteries. The battery level shown in the Bluetooth menu item may not be accurate.
Step 5
If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
Step 6
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
Step 7
If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
Start up in safe mode. Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 11. If you ever have another problem with the drive, replace it immediately.
If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 8
Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
Step 9
If the startup device is an aftermarket SSD, it may need a firmware update and/or a forced "garbage collection." Instructions for doing this with a Crucial-branded SSD were posted here. Some of those instructions may apply to other brands of SSD, but you should check with the vendor's tech support.
Step 10
Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 11
Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
Step 12
This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 13
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

Lost you tube from home screen after upgrading to os6?

I've lost you tube from home screen after upgrading iPad software. Is this normal?

Sorry, no YouTube in IOS 6.
You can use the iPhone version of YouTube or Jasmine
http://itunes.apple.com/sg/app/youtube/id544007664?mt=8
https://itunes.apple.com/sg/app/jasmine-youtube-client/id554937050?mt=8

PC freezes,blue screen etc..after latest update

hello
looks like im not the only one with BIG problems after latest updates,my problems are..
1.Pc sees ipod in my computer but itunes wont start and pc locks up when i load itunes.
2.Start itunes without ipod connected itunes works fine but when i plug ipod in pc goes to blue screen and crashes.
3.If i restart pc with ipod still plugged in pc fails to boot after p.o.s.t. just a blank screen.
3.Ipod shows 2000 tracks itunes shows 1500?
4.I had a fwe problems before latest update but now cannot do anything with either.
Should i reset ipod to factory settings, delete itunes and load from cd when i bought ipod or is there an easier option?

Boot to the Recovery Volume (command - R on a restart or hold down the option/alt key during a restart and select Recovery Volume). Run Disk Utility Verify/Repair and Repair Permissions until you get no errors. Then re-install the OS.
OS X Recovery
OS X Recovery (2)

My iPhone 5s won't turn off or on it keeps flashing the apple screen on off. When I tried to connect to iTunes on windows 8 computer, it comes up with an error message: iTunes could not connect to this phone. An unknown error occurred OxE8000084

Can anyone help me? My iPhone 5s is flashing the apple screen on and off and I can turn the phone on properly or off. When I connected it to iTunes on my windows 8 computer I got the following message: iTunes could not connect to this phone. An unknown error occurred OxE8000084. Can anyone help me correct this so I can start using my phone again.
Thank you

http://support.apple.com/kb/TS3221

My apple store isn't working after I updated to ios 8.1.3, its just a blank screena dn it wao't load after doing everything I can to make it work again

my apple store isn't working after I updated to ios 8.1.3, its just a blank screen and it won't load after doing everything I can to make it work again. I even restarted the phone and I just don't know what to do at this moment.

Sign out of the Appstore and back in and it should resolve the issue.
Setting > iTunes and App Store > click the Apple ID at the top and click sign out. Click sign in.

HT201263 iPod touch 4th gen stuck on apple screen after trying to update ios 6

iPod 4th gen stuck on apple screen after I tried updating to IOS 6. It won't turn off or reset even after updating iTunes to latest version. My iPod doesn't show up when I connect to iTunes. HELP PLEASE!

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

HT4623 i now just have the apple logo on my screen after trying update

i now just have the apple logo on my screen after trying update and itunes cannot connect to my phone.

Connect to iTunes on the computer you usually Sync with and “ Restore “...
http://support.apple.com/kb/HT1414
If necessary Place the Device into Recovery mode...
http://support.apple.com/kb/HT1808

Thin white line acroos the top of my screen after software update. Can NPRAM reset help to solve this or is it a permanent pixel problem?

Sudden thin white line acroos the top of my screen after software update. Can NPRAM reset help to solve or is it permanent pixel problem?

Try PRAM reset.
Reset PRAM: http://support.apple.com/kb/PH14222
Best.

Photo Booth became black screen after Newpad updated to iOS 7

Photo booth became black screen after Newpad updated to iOS 7

It is not a widespread issue that requires apple to come out with a fix, I have many ipads that were updated and have no issues.
I would suggest you back-up and restore your device, that can repair many issues if the original update was corrupted.

HT5278 I lost a screen after this update, does anyone know how to fix this?

I lost a screen after this update, does anyone know how to fix this? Update iOS 5.1.1 It used to have three screens with icons on them, now only 1.

No offence, but as with quite a few others, my Iphone stopped charging on mains after iOS 7.0.4 update too.
Not sure you can categorically advise that "it simply is not a software issue" when so many different people are having the same symptoms after updating their iOS Just have a quick Google!
Luckily my (original Apple) cable will still allow recharging via USB to a laptop. So, process of elimination would point to a bricked charger that was working faultlessly up until the iOS 7.0.4 update was applied. Seems quite a stretch to be a coincidence.
Look forward to an explanation ..... and an update? ......

Flashes from apple screen to blue screen after latest update.

Similar Messages

Maybe you are looking for