FlashHelp files not displaying in topic pane

I have generated FlashHelp using RoboHelp 7. I then copied
the FlashHelp folder to a server via FTP.
When I view the ...index.htm file in the !SSL! folder on my C
drive, the system displays correctly. When I view the ...index.htm
file in the FlashHelp folder on the server, the .htm files are not
displaying in the topic pane. It states "Internet Explorer cannot
display the webpage. On the first page of the FlashHelp wizard, I
have the output folder and start page designated
(...!SSL!/FlashHelp/Index.htm). The default topic is
GettingStarted\home.htm.
Any suggestions?

If the toolbar and left pane are loading, the scripts must be
working correctly. Do you have a way to view a list of the files
that are actually on the server and verify that all your HTML
topics are present?
The reason I ask is that I had trouble recently with one
project in which I was getting application (Java "FileNotFound")
errors in my topic pane when accessing the help through the
application. I use version control, however, and once I had deleted
my files from the repository and then checked them in again, the
problem seemed to be fixed. But if you are doing FTP directly to
the server, you are probably not dealing with application builds.
In any case, the problem appeared to be that the server was not
recognizing that the files were actually there.

Similar Messages

Some .htm file not displaying in Topic List, but displaying in RH11 folder

Hi All,
We are running a project using RH 11, team consist of 3 person (include me)
But we have problem with many .htm file from my 1st coworker, file not displaying in Topic List in my Robohelp and 2nd coworker.
Although we already get the latest file again and again
But .htm file displaying in all our RH11 folder.
In my 1st coworker RH, all file displaying in Topic List also RH11 folder, but when file generated then
Many files from 1st coworker, hyperlink is not working well (broken link / file not found)
Does anyone have experience about this problem
Thanks

First of all, make sure you do not have the following files in source control: .cpd, .pss, .ldb.
These files contain local information that can cause problems when in source control.
Then try this:
Everyone deletes the .cpd file.
Everyone gets the latest files for the whole project from source control.
Open the project.
Does everything now display correctly?
If yes, you need to make sure you delete the cpd file before opening the project each day, and also during the day if you know a co-worker has made changes that you need. This file is a database which includes a list of all the files Robohelp knows about. When other people are adding and removing files, this information no longer matches properly. I recommend doing a Get Latest in these situations as well, just to make sure Robohelp can find the correct information.
If you are still not seeing the correct files repeat the above process, but at step 2, pick the options to Overwrite local files. I can't say where you will see these options - they may be two checkboxes in a dialog box when you select Get Latest - it will depend on your source control application.
Hope this helps.

View the .rtf file not display the data in BI Publisher Enterprise.

Hi,
Platform: OBIEE 10g in NT XPsp2
View the .rtf file not display the data in BI Publisher Enterprise.
Step 1, I created Answer-request, create .rtf file with Word and add the request name, Add bar chart and table, preview PDF is working fine with data, Upload this template to Answers, View Template from Answer is working fine with data.
Step 2, Answers – More Products > BI Publisher > My Folders > Create a new report > Edit > Data Model > New > Type: SQL Query > Data Source: Oracle BI EE > Query Builder > from SupplierSales assign Customer, Periods, Sales Facts (select Region, state, Year, Units Shipped) > Results > Save > Save
Click Layouts > New > enter Name ….. > Click Layouts > borrows .rtf file in Manage T file > Upload > Save > Click View
It is showing only the .rtf file without data. Why there is no data?
Please guide me to solve this issue.
Thanks,
Jo

Thanks for you reply,
Our scenario is this report is basically a dissconnected mode report... we are developing these reports for mobile clients.
We dint face this kind of issue while developing other reports.
So please let us know if you have any idea on why we are facing this issue.
Regards,
Maneesh

HT2500 How do I not display the preview pane in mail until I open it with a double click? Some mail I do not wish to open-just delete it.

How do I not display the preview pane in mail until I open it with a double click? Some mail I do not wish to open-just delete it. New macbook pro with LION OS

Just drag the divider line between the preview pane and the message list all the way to the edge so the preview is completely closed. Selected messages will open in a new window with a double-click or the return key.

ICO file not displaying at run time?

Hello Experts,
I an using fusion 11.1.2.1 32 bit. I have Copied the Icons as well as GIF files in C:\Oracle\Middleware\Oracle_FRHome1\forms\java folder.
At button property i set Iconic to yes
and file = addrow
Icon not display at run time.
but when i set file = abc.GIF
image is displaying at run time.
My doubt is that ICO file not displaying at run time while GIF file are displaying.
Do i need to change configuration ?
Please do the needful.
Thanks
Yash

Hi Yash,
First Try this steps
To resolve this issue, follow these steps:
Double-click My Computer, and then click Options on the View menu.
Verify that the Icon file type appears on the File Types tab. If the Icon file type does not appear in the Registered File Types box, skip to step 10.
Click Icon in the Registered File Types box, and then click Edit.
Verify that the following settings exist, and then click OK:
The Description Of Type box contains Icon.
If there is a Confirm Open After Download check box, it should be selected.
If the settings do not appear exactly as listed in step 4, click Remove, click Yes, and then click OK. If the settings do appear as listed in step 4, skip to step 10.
Click New Type.
In the Description Of Type box, type Icon.
In the Associated Extension box, type ICO.
Click OK, and then click Close.
Use Registry Editor to view theHKEY_CLASSES_ROOT\.icokey, and then verify that the default string contains the following value:icofileIf the .ico key does not exist, create it, and then insert the value listed above. If any other values exist in the .ico key, delete them.
Use Registry Editor to view theHKEY_CLASSES_ROOT\icofilekey, and then verify that the default string contains the following value:iconIf the icofile key does not exist, create it, and then insert the value listed above. If any other values exist, delete them.
Create a new key in the icofile key called DefaultIcon , and type %1 as this key's default value.
Quit Registry Editor, and then restart your computer.
Second Try this
Simple way
Copy your images to:
1
c:\Oracle\Middleware\as_1\forms\java\
Notes:
- Icon files may not be supported.
- In case of a Java security issue when using gif images, you will need to create a jar file and sign it with oracles sign-tool (see below, point 6).
- In case you having trouble with oracle’s sign-tool, do it directly with java’s
Recommended way
1. Create a “icons” folder and place all your gifs in there
i.e. “c:\Oracle\Middleware\as_1\forms\java\<icons>”
2. From within icons folder make a jar file of all the gif images:
1
jar -cvf frmicons.jar *.gif
3. Copy this new jar into “c:\Oracle\Middleware\as_1\forms\java\”
4. Edit/update formsweb.cfg file:
path = c:\Oracle\Middleware\user_projects\domains\<my_domain>\config\fmwconfig\servers\WLS_FORMS\applications\formsapp_11.1.1\config\formsweb.cfg …to update/include:
1
2
3
4
5
6
7
8
9
# Forms applet parameter
codebase=/forms/java
# Forms applet parameter
imageBase=codebase
# Forms applet archive setting for other clients (Sun Java Plugin...etc)
archive=frmall.jar,frmicons.jar
# Forms applet archive setting for JInitiator
archive_jini=frmall_jinit.jar,frmicons.jar
5. Edit/update Registry.dat file:
path = c:\Oracle\Middleware\user_projects\domains\<my_domain>\config\fmwconfig\servers\WLS_FORMS\applications\formsapp_11.1.1\config\forms\registry\oracle\forms\registry\Registry.dat
1
2
default.icons.iconpath=icons/
default.icons.iconextension=gif
At this point your icons should work normally, but if you get a security check of Java for gif files then proceed to the next step to fix this. TIP: May need to restart the weblogic/forms server for changes to take effect.
6. Sign your jar file with oracles sign_webutil.bat sign-tool.
path = c:\Oracle\Middleware\asinst_1\bin\sign_webutil.bat
Firstly, you need to edit the sign_webutil.bat as follows:
1
2
3
SET KEYSTORE_PASSWORD=my_password
SET JAR_KEY=webutil2 # will need to change for every run
SET JAR_KEY_PASSWORD=my_password
Secondly, set the environment path and finally run the command:
1
2
3
set path=c:\Oracle\Middleware\as_1\jdk\bin
cd c:\Oracle\Middleware\asinst_1\bin\
sign_webutil c:\Oracle\Middleware\as_1\forms\java\my_icons.jar
This will create your signed jar file. Once initialized from the web-app it should ask the user to “Trust” the certificate and never prompt again.
Other issues you may encounter and may need to edit/update the following files/registry entries as well:
formsweb.cfg
path = c:\Oracle\Middleware\user_projects\domains\<my_domain>\config\fmwconfig\servers\WLS_FORMS\applications\formsapp_11.1.1\config\formsweb.cfg
1
2
3
4
5
6
7
8
9
10
# Forms applet parameter
codebase=/forms/java
# Forms applet parameter
imageBase=codebase
# Forms applet archive setting for other clients (Sun Java Plugin, ...etc)
archive=frmall.jar, my_icons.jar
...or
# Forms applet archive setting for JInitiator
archive_jini=frmall_jinit.jar, my_icons.jar
Registry.dat
path = c:\Oracle\Middleware\user_projects\domains\<my_domain>\config\fmwconfig\servers\WLS_FORMS\applications\formsapp_11.1.1\config\forms\registry\oracle\forms\registry\Registry.dat
1
2
default.icons.iconpath=/forms/java
default.icons.iconextension=gif
Registry entries:
1
2
UI_ICON:<path_to_icons_dir>
UI_ICON_EXTENSION: "gif": ".gif" "ico": ".ico"
Credits and further information can be tracked for icons issue here and for jar file creation here.
Hope this will help.

Files not displaying in list view?

I recently upgraded my MacPro (early 2008 8core) from Snow Leopard (10.6.8) to Lion.
At first i wanted to do a fresh install on my machine but soon realised it wasnt possible to import old accounts from another internal drive so i opted to upgrade the system instead.
After doing so I was faced with an odd problem of files not displaying in my finder windows when switching through internal drives or changing from 'file view' to 'list view' or 'column view' etc...
The attached screenshots were taken in sequence youll also note that the path bar & top window name dont update either.
The relevant drives are in healthy condition with several tests run over them to ensure their healthy(Disk Utility & Drive Genius). I have also run permissions repair, and a utility to empty cahces etc (OnyX). From what i can see its possibly something to do with the Finder not updating or refreshing the window? The issue seems to be isolated to the drives however intermittently the problem exists deeper into the directory on 'TerraTank' Volume.
The finder also crashes semi-frequently and the problem seems to dispaear for a while and revealing the contents of these volumes for a few mins.
I have also checked activity monitor to see if any particular process was going haywire and all seemed relativly normal.
Has anyone else experienced this problem?
Regards,
JP

Onyx may be causing problems. Don't use it on a non-backed up system, as cleaning caches may damage them, and make things not work. Make sure your Spotlight indexes all drives you wish to be searchable. Go to Apple menu -> System Preferences -> Spotlight and add each hard drive to the Privacy section, and then remove it again. Then click on the Spotlight menu every half hour to see when it stops saying that it is indexing. It might take a few hours. But once done, it should be fixed.

Flash files not displaying in Firefox, Safari, and Opera. Most recent Shockwave installed, private b

Flash files not displaying in Firefox, Safari, and Opera. Most recent Shockwave installed, private browsing active in Firefox? Works perfectly in Chrome and Internet Explorer. HELP!!!!

I suppose it would have helped if you knew what it was supposed to look like! I'm using Shockwave Flash 11.7.700.169 and the version of Firefox I'm on is 20.0
When you see it in Firefox - do the thumbnail populate the grid? See attached populated and un-populated.
Populated grid is with Chrome.
Thanks!
Thanks in advance!

.nef files not displayed in my content window!

.nef files not displayed in my content window. I just want to work, not screw around fixing thing. How come the .nef files won't display anymore? The new .nef files don't display.
Thanks for your help.
--max

Well, I'm afraid I'm not going to be a lot of help. From what I see, if everything is installed correctly it should be working. I know that there has been a few challenges associated with Vista, but I don't know enough about that aspect to really comment. I'm still using Windows XP.
As far as Camera Raw is concerned, there have been four updates since CS3 was released. If you haven't done any updates you are probably in for a pleasant surprise. New controls have been added that most people have found to be quite valuable. The most current version of Camera Raw is 4.3.1. The first thing I would suggest is for you to download that update and get it installed and see it that makes a difference.
I know you indicated that you don't want to have to do a lot of fine tuning of the program. But Adobe Camera Raw (ACR) is updated frequently, and you always want to make sure you have the most current version. If the new version of ACR doesn't resolve your issues the problem "might" be related to Vista. And I'm afraid I cannot help you with that at all.

Robo 8 Topic files not displaying in project manager

I am working on a project upgrade and have made new topics in Robo 8 project. When I view the topic files for a particular folder in the Project Manager view only 1/2 of my topics are displayed.. When I look in the folder (behind the scenes), all my topics are there, just not displayed in the Project Manager. What do I need to do? Thanks!.

Peter,
Thanks for your help and suggestions.
I have a project that I tested with RH 8.0.2.208 using the following steps/results.
October 5, 2009 – last date the project was modified – based on the modified date of *.htm files and *.xpj file.
Copied the project.
Opened the copy using *.xpj.
Broken links exist.
Opened a 10-5-2009 copy of the actual HTML help file. Checked one broken link topic. The topic exists in the output and looks correct.
Copied the project again.
Deleted *.cpd.
Open the new copy using *.xpj.
Broken links exist.
Generated (HTML) primary output.
Checked one broken link topic (same as above). Topic content exists, but the screen captures in the topic do not. A red x appears in place of the screen captures.
I do not know how to uninstall only the patch. I looked at Add or Remove programs, and I do not see a stand alone entry for the patch.
To uninstall the patch, do I have to completely uninstall RH 8.0.2 and reinstall the older version fresh? That seems like a major bother. An uninstall and fresh install of the earlier version will likely eliminate some styles and other settings that I have saved.
Is there a way to uninstall just the patch?
As an alternative to uninstalling 8.0.2, I opened a fresh copy of the project (last modified 10-5-2009) on a machine with RH 8.0.203 installed, i.e., a machine without the patches installed.
There were no problem with the project, i.e., no broken links.

Chinese and Korean characters not displaying in navigation pane

I have an issue with Chinese and Korean characters not displaying on the tabs in the navigation pane:
I have 2 RoboHelp projects (using RoboHelp 8 with the updates installed) to generate WebHelp, one in Simplified Chinese, the other Korean. The HTML files, .HHC and .HHK were sent out for translations. I have set the appropriate language in the project settings, everything almost works, except for the text on the Contents, Index, and Search tabs. (I'm not using a skin.) I have read in various threads that the lng file should be edited using the RoboHelp interface, and this seems to be the crux of the problem. The characters do not display correctly through the RoboHelp UI.
The computer on which I generate the WebHelp is Windows Server 2003, and I do not have the language packs installed. (And am having problems getting hold of the language packs to install to see if this fixes the problem.)
Aside from installing the language packs, is there anything else I can try to help resolve the problem? (The characters in the content are displaying as expected.)
Any assistance is greatly appreciated

Perhaps something in the Translation Info section of this page might help? (The specifics are for Japanese, but I believe the issue would apply to all double-byte languages).
http://helpware.net/FAR/far_faq.htm#JapComp

IPad Apps File Sharing in iTunes - files not displaying

Are you not supposed to be able to copy files to and from your computer/iPad for apps that support File Sharing in iTunes? When I open iTunes, connect iPad, click on the Apps, scroll below to File Sharing, the files on my iPad for the apps listed do not display; ie: Pages documents, Numbers documents, etc. I am running a Windows XP computer. I'm quite certain they were showing up there a few weeks ago.

You have to tell the iPad to send it to iTunes.
Open the document you want. Tap the spanner icon. Click Send to iTunes.
Now go to iTunes, find the iPad in the left hand pane, click Apps at the top, go to the bottom of the page, select pages in the box under 'File Sharing', and you will see that document there.
Pointless feature but there you go.

Baggage files not displaying in Project Manager panel?

I have 203 baggage files in a project but only 45 of them
actually display under the Baggage Folder list in the Project
Manager. When I select new/baggage file and select one of
these...there is no response from RH. If I open the rhbag.apj file
with Notepad the files are listed - all of them! I don't see any
strange characters and we are very careful to name our baggage
files with underscores and only alpha/numeric characters.
If I rename the file outside of RH and then reimport it, it
will display and I can change the name back...but that's very
time-consuming for 160 files.
What is causing RH to not display these? Any topic linking to
them works. It just seems to be a display quirk for the folder
itself. I tried rebuilding the .cpd file and that didn't change
anything.
Anyone have any helpful tips on how to fix this? THANK
YOU!!!

Colum & Rick,
I went ahead and backed up the rhbag file, then rebuilt the
.cpd file with a rhbag file from a brand new project with no
baggage files in it. Of course there were none when this project
now opened. I can now import the baggage files and they display.
Crazy. Will just add all 160 in this manner and hope this is done.
Thanks again for your help...I have gremlins!

.NRW files not displaying thumbnails in Bridge

.NRW RAW files from Nikon P7800 do not display thumbnails or metadata in Bridge. PsCC, Bridge and CR 8.3 are all showing as up to date on CC Desktop App. Files display correctly in Lr 5.3. Any suggestions ?

I have:
PhotoshopCC>Edit>Preferences>CameraRaw>8.3.0.141
BridgeCC>Edit>CameraRawPreferences>8.2.0.94
The computer found 6 files named Camera Raw.8bi. They are in pairs , two in the CS5 folder and two in the CS6 folder, two in the CC folder. One of each pair has >Program Files(x86)> The other one has >Program Files>.
When I go to C:\ Program Files\Common Files\Adobe\Plug-Ins\CC\File Formats\ only one (Camera Raw.8bi) file shows. This was created on 18 March 2013 and modified on 3 December 2013.
If I go to C:\Program Files(x86)\Common Files\Adobe\Plug-Ins\CC\File Formats\ another (Camera Raw.8bi) file appears, created and modified same date and time as the first one.
Is this making any sense ? Thanks for your help.
It appears Bridge is using CR 8.2, the question is why and how do I persuade it to preference CR 8.3
By the way, I failed to mention it previously CR is converting and editing the NRW files normally, I just can't see their thumbnails in Bridge.

Raw files not displayed in preview

In Elements 10, are raw files STILL not displayed in preview in Windows 7?

Thanks for your reply, Ken, but when I do the Get photos-From Files and folders thing Elements did the same thing it does for jpeg files but then I still can't see the raws. HOWEVER, this morning after reading your message I went back to Elements to get that message that Elements gave me after trying to get the raw files, so that I could quote it to you, and there were all the raw files that I had gotten and tried to view yesterday. So dawn breaks on Marblehead and I realize that maybe Elements has to be refreshed in order to see the raw files. Thanks Ken!
John Holstein Mobile phone: 82-10-4727-0264
Chongno-gu Myeongryun 1-gil 13, Apt. 401
Seoul 110-811
South Korea

.swf files not displaying all of a sudden!

Hi all
currently working on a new website for my design company and
have hit an unexpected - and very annoying - problem!
my portfolio graphics are all vector illustrations - I export
them from there as a .swf file - dump them into dreamweaver - and
away we go. all has been going fine - my portfolio covers 4 pages -
first two have worked fine - the final two simply will not display
when previewed in browser - or uploaded via ftp to a site area.
the graphics have all been created in similar ways - the
export functions for .swf have not been altered in any way at all -
but still not displaying. when i open up flash player to preview
the file - again blank - when i do the same with the first two .swf
files, no issues!!
I have recreated the html files to see if that was the issue
... to no avail.
I also dumped the swfs into the 2 html files that are working
fine - still no luck.
tis driving me mad - any ideas guys??? as i said - they are
just vector logos as with the first two pages so not sure what on
earth is happening!
incase this helps with any ideas....
this page as you can see works fine:
http://www.justsoho.com.au/test_portfolio.html
this one doesn't! :
http://www.justsoho.com.au/test_portfolio_02.html
hoping someone can shed some light on this!
cheers
Rebecca

Upload this file to server. portfolio2.swf
It should be in this location
http://www.justsoho.com.au/portfolio2.swf
--Nancy O.
Alt-Web Design & Publishing
www.alt-web.com
"justsoho" <[email protected]> wrote in
message
news:ftjufb$gut$[email protected]..
> Hi all
>
> currently working on a new website for my design company
and have hit an
> unexpected - and very annoying - problem!
>
> my portfolio graphics are all vector illustrations - I
export them from
there
> as a .swf file - dump them into dreamweaver - and away
we go. all has been
> going fine - my portfolio covers 4 pages - first two
have worked fine -
the
> final two simply will not display when previewed in
browser - or uploaded
via
> ftp to a site area.
>
> the graphics have all been created in similar ways - the
export functions
for
> .swf have not been altered in any way at all - but still
not displaying.
when i
> open up flash player to preview the file - again blank -
when i do the
same
> with the first two .swf files, no issues!!
>
> I have recreated the html files to see if that was the
issue ... to no
avail.
>
> I also dumped the swfs into the 2 html files that are
working fine -
still no
> luck.
>
> tis driving me mad - any ideas guys??? as i said - they
are just vector
logos
> as with the first two pages so not sure what on earth is
happening!
>
> incase this helps with any ideas....
>
> this page as you can see works fine:
>
http://www.justsoho.com.au/test_portfolio.html
>
> this one doesn't! :
http://www.justsoho.com.au/test_portfolio_02.html
>
> hoping someone can shed some light on this!
>
> cheers
> Rebecca
>

FlashHelp files not displaying in topic pane

Similar Messages

Maybe you are looking for