Flashing apple icon on ipod start up screen

so my brothers ipod ran out of power completly while watching a movie on it.
when he plugged it into his computer all it did was show the apple icon and flash on and off, its not charging and teh computer wont recognize it.
ideas ?

you could try reseting the ipod. not sure if it will fix the problem but that is what i do when my ipod is not working and it always fixes the problem

Similar Messages

  • HT1430 iPhone 5 has a flashing Apple icon but wont turn on ?

    IPhone 5 won't turn on has a flashing Apple icon?

    Do a recovery mode
    http://support.apple.com/kb/HT1808

  • HT4623 my phone is stuck on the apple icon :( how to start it up? pleaaase help

    my phone is stuck on the apple icon how to start it up? pleaaase help
    it happened after i tryed to update the software
    how to fix this???
    plz help

    yes it was jailbroken
    now after i restored it from itunes i'm having an other problem
    theres a message saying '' activation request could not be completed

  • Flashing Apple icon with horizontal line flashing at random on screen

    I know this can't be good
    Here's the background info:
    Our G5 completely crashed about 4 months ago. Lost my iTunes library but my iPod mini was full and working, so I used it until the battery died. Now iTunes is reinstalled but I was scared to plug iPod in and wipe out everything on it by mistake. Today after researching on this site I dowloaded Senuti to help with getting the contents of iPod back into iTunes library. Two hours ago I plugged in my iPod into USB on the G5, and at first I got the dead battery icon, but after a couple of minutes I got a flahing Apple icon, with a horizontal line on the screen flashing at random places. iTunes does not 'see' my iPod. Needless to say, Apple support website does not address the issue... Any help is appreciated! Thanks from sunny Florida

    Try to connect your iPod with a window PC
    Windows users having trouble with their iPods should locate a Mac user. In many cases when an iPod won't show up on a PC that it will show up on the Mac. Then it can be restored. When the PC user returns to his computer the iPod will be recognized by the PC, reformatted for the PC, and usable again. By the way, it works in reverse too. A Mac user often can get his iPod back by connecting it to a PC and restoring it.
    Tips
    a. It does not matter whether the format is completed or not, the key is to erase (or partly) the corrupted firmware files on the Hard Drive of the iPod. After that, when the iPod re-connected with a computer, it will be recognized as an fresh external hard drive, it will show up on the iTunes 7.
    b. It is not a difficult issue for a Mac user to find a window base computer, for a PC user, if they can’t find any Mac user, they can go to a nearest Apple Shop for a favor.
    c. You may need to switch around the PC and Mac, try to do several attempts between “Format” and “Restore”
    http://discussions.apple.com/thread.jspa?messageID=2364921&#2364921

  • Iphone screen black with flashing apple icon

    What is going on with my phone?  It wouldn't charge, I connected it to my mac to charge.  Now it is a black screen with an apple icon flashing on and off but I cant get it to do anything else.

    Hi SonoranBreeze,
    Thanks for using Apple Support Communities.  The following article provides some useful information and steps that may help get your iPhone working again.
    iPhone, iPad or iPod touch: Not responding or does not turn on
    http://support.apple.com/kb/TS3281
    Cheers,
    - Ari

  • The screen stays on the apple icon when i start up!!!!!!!!!!!!

    ....for some reason..when i press the power button...the laptop makes a loud fan kind of noise...eventually the screen will light up and the apple icon will appear...whats weird is that the icon moves down from its original position slighty..its almost not noticeable but with all the restarting ive been doing its become more apparent....after that...its a pretty much a backlit preview of the apple icon. When i try to use the Mac OSX install disc to run the hardware tests (quick or/and extended) ...it comes up with no diagnostic problem....
    Ive also tried holding down the option key as i turn the power on and when i choose the the HD icon and press on the right arrow icon ...the apple icon comes up again..and then in a few miliseconds the applen icon changes to a small circle with a line through it...kind of like a barred symbol ..(similar to when an ipod is connected and it tells you not to disconnect)...i have a feeling it may have been a file in prefs or reciepts that i shouldve not erased...
    Is there anyway at all to salvage what i have on HD?..and what can i do ..as its so frustrating knowing ive just upgraded my Pro-Tools with so many plug-ins i havent got to use yet....
    any help and advice would be appreciated
    Joshua

    I thought I would add more to my story in case it triggered someone's memory. The thing that brought me to this thread is that the screen icon did that little hitch thing then stops. It moves about 1/4 inch to the right then gets something like artifacts on the top and left edge. Other things I have tried: booting into target mode, running disk verify, which is fine, disk repair won't work because it won't unmount, booting from the apple hardware cd, which only gets me into open firmware, it won't run the program, reset the open firmware and vram to defaults. The part that almost disturbs me most is that I couldn't get the OS install discs to run, it just gave me a circle with a line across it, and that I had to format the drive while in target disc mode, then install the same way. It rebooted after the install and showed the "bad" computers desktop on the main machine just fine. I just don't get it.

  • Apple icon locked on a black screen on ipad2

    within twenty four hours of upgrading to IOS7 my Ipad2 has locked up with the apple icon intermittantly flashing on and off on a black screen.  I have tried every trick I know to reset the Ipad.  The machine will not show a homescreen, will not show status of battery, nothing.  The battery is now depleted.
    I upgraded to the latest Itunes software immediately following the wifi download of IOS7 -
    Any suggestions?

    Try the following:
    1. Reset: Hold the Sleep/Wake and Home button down for about 10 seconds until you see the Apple Logo.
    2. Restore:
    http://support.apple.com/kb/HT1414
    3. Recovery:
    http://support.apple.com/kb/HT1808

  • Flashing apple icon on my nano...help please!!!

    I was updating my nano, disconnected safely but now all it is doing, is flashing a grey apple icon on a black background. I did the 5 R's and nothing. I have had my Ipod for over a year and have never had this happen. Any ideas?
      Windows XP  

    Let it run down for at least 24 hours. Connect it to power (preferably a wall charger) and charge it for at least 30 minutes. Connect it to your computer and Restore it in iTunes. You may have to put it in disk mode for iTunes to see it.
    Incidentally, you need to post in the iPod Nano forum, not the HiFi.

  • Iphone frozen on apple icon, won't start up

    Installing an update to an ap and it froze up. Turned iphone off and when I tried to turn back on it's frozen on the apple icon and won't do anything.

    First thing to try is hold down the home and power buttons for around 30 seconds until the screen turns black and the apple reappears. When it reappears release the buttons.
    If that doesn't work, connect the device to iTunes. And then... http://support.apple.com/kb/HT1766

  • The apple on the gray start-up screen turns into a circle with a slash.

    My G5 has been pretty reliable for the past three (?) years. Lately it's been a bit squirrely booting up--once it went into kernel panic during boot, but powering down and restarting seemed to fix that. Lately, too, when I let the machine run and it goes to sleep I'll come back after a couple of hours to find the fan running at top speed and the machine unresponsive. Yesterday it seemed to have problems booting so I reset the PRAM and NVRAM and ran Onyx and it worked fine all day. This morning when I went to boot, I got the usual gray screen with the whirling gear. After about a minute, the apple in the center of the screen turned into a circle with a slash while the gear continued to whirl. How do I fix this?

    I've subsequently tried a number of things. I reset the SMU, which didn't help until I also reset the PRAM. Computer booted normally. I rebooted from the Tiger DVD and repaired the start up disk; there were only two small errors to be fixed. The machine booted normally (and pretty quickly) for about a week before the problem resurfaced. I again went through the first two steps and got things working once more.
    Lately the problem has returned. First, resetting the PRAM didn't help; only resetting the SMU worked. At the last event I needed to reset the PRAM without resetting the SMU. When I get home tonight I'll try booting from the DVD and repairing the permissions on the start up drive.
    At first, I thought I'd leave it running all night, but when I got to the office in the morning the fans were running at full throttle and the machine was in a coma. All I could do was reboot--which it did, immediately going into kernel panic. I shut it down and rebooted, resetting the PRAM in the process. The computer booted and ran fine all day, although it seems slow (I did have Photoshop CS4 and Lightroom running simultaneously, but I do have 5 GB of RAM).
    It's been suggested I may have a corrupt RAM chip (computer doesn't chirp at me, as I'm told it would) or, more terrifying, a processor is about to check out. I also have an ATTO SCSI card in this to run a legacy scanner. Could that be a problem?
    Any advice?
    JP

  • Flashing apple icon on ipad air

    i set my ipad air to wake with pandora but failed to connect it to a power source. now it keeps flashing with the apple icon and won't let me logon. I've tried restoring but it says I have to turn "find my ipad" off first which I can't do because i can't logon. I removed pandora from my apps through itunes. I tried updating to the newer os but it won't let me do that either. Can anyone offer any suggestions?

    FORCE IPAD INTO RECOVERY MODE
    1. Turn off iPad
    2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
    3. Plug USB cable into computer's USB port
    4. Hold Home button down and plug the other end of cable into docking port.
    DO NOT RELEASE BUTTON until you see picture of iTunes and plug
    5. Release Home button.
    ON COMPUTER
    6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
    7. Select "Restore iPad"...
    Note:
    1. Data will be lost if you do not have backup
    2. You must follow step 1 to step 4 VERY CLOSELY.

  • HT204074 I have an iphone 4. I upgraded to ISO6. All well until Monday. I was updating 2 Apps over Wifi which froze. I tried to do the soft reset and now my phone has frozen totally. It will not go passed the Apple icon sign on start up. I drained the bat

    I have an iphone 4 and upgraded to ISO6. aLL WAS WELL UNTIL mONDAY WHEN i WAS UPDATING 2 aPPS AND MY PHONE FROZE. i TRIED SOFT RESET AND THEN MY PHONE HAS NOW FROZEN ON THE aPPLE icon and I cannot go further. I cannot sync to pc as my phone is not recognised. Hlep!

    Hi, beth.lau.gr.
    Thank you for visiting Apple Support Communities.  
    I understand you have been experiencing issues with your iPhone restarting and showing you a blue screen.  I wont be able to give you an exact answer as to why this is happening.  However, this is the most relevant troubleshooting article for this issue.  This article also provides options to reach out to us via phone for additional assistance.  
    If your iOS device restarts, displays the Apple logo, or powers off while you're using it
    http://support.apple.com/en-us/HT203899
    Cheers, 
    Jason H.  

  • Iphone not starting up, apple icon fading at start up

    My iphone 5 will not turn on, the silver apple icon appears for 5 seconds and then thats it, the screen shuts off. when i plugged the phone into a charger or computer, the silver apple icon will appear and then fades out along with the screen display with some small vertical lines running down through the screen this will occur repeatedly until i unplugged my iphone and shut it off my holding the power button.. hopefully someone can give me some guidance on this issue, thanks!

    Hello simmer5555,
    Thanks for the question, that definitely sounds frustrating. We'll need to isolate this issue to see if it is hardware related. To accomplish this, we'll need to restore the iPhone with a computer running iTunes.
    iTunes: Restoring iOS software
    http://support.apple.com/kb/HT1414
    If you are unable to do so, please see the following:
    iOS: Unable to update or restore
    http://support.apple.com/kb/HT1808
    Note: Restoring your iPhone will erase all contents, however if you have a previous backup you may be able to restore from it afterwards.
    Thanks,
    Matt M.

  • Strange globe and folder with a question mark on it icons showing at start up screen, PLEASE HELP!

    I got a PowerBook G4 tonight from my brother's friend. His friend said it's works fine, but he thinks it needs updated. It powered up fine at first. I looked around and found files that belonged to the previous owner (pictures etc) so I dragged them to the trash and deleted them from the trash. I couldn't get the wi-fi working. It recognized that it was there, but when I clicked on it and typed in the password, it wouldn't connect. So I took it out to our BTHomeHub and took the Ethernet cable out of the computer and plugged it into the PowerBook. I tried going onto Safari but nothing happened so I restarted it. When it loaded back up there's a globe icon that flashes and then a folder icon with a question mark on it, the first time it loaded past it. I held the power button down to turn it off and turned it back on again (hoping it would've disappeared) Now it won't load past that. I've looked around trying to find a solution, but nothing I've tried has worked. I even tried turning it on and off again, countless times. I'm really worried I've done something wrong and that it's broken! PLEASE HELP! (I'm not brilliant with computers, so simple instructions please!)

    The globe icon means the Mac is trying to find a Network system to boot. Startup but depress the Option key. This will activate the Startup Manager window. Hopefully you hard drive will appear. Select it & click the right arrow.
     Cheers, Tom

  • My iMac Version 10.6.8 has problems starting up. I often get a white screen without the apple icon.

    My iMac Version 10.6.8 has problems starting up. I often get a white screen without the apple icon. Then I must turn the computer off and restart. Restarting will usually bring up the Apple icon and the start screen. What could be causing this? And how can I resolve this issue. My Mac is still under warranty, I've had it just 7 months.

    Reset the NVRAM/PRAM and Reset the SMC.

Maybe you are looking for

  • SHORT DUMP DYNPRO_NOT_FOUND, DOUBLE CLICK ON OPERATION IN NETWORK GRAPHIC

    Dear Experts, I am getting shor dump error as DYNPRO_NOT_FOUND in transaction IA02 while double clicking on operation in newtwork graphic. I found SAPNOTE 397750 for releases SAP_APPL 46 and 46C. But we are using ECC 5.0 SAP_APPL 500. Please give the

  • A lot of questions, please help

    Hi! I'm running 10.4.11 on my PowerMac G4 AGP(500mhz), and I've used Classic Environment before to play some old OS 9 apps, like Photoshop CS, but when playing the original Nanosaur, the graphics seemed messed up. There was no texture at all, and eve

  • How to convert GMT time into IST on weblogic server

    Hello, i am using Weblogic server interconnected with webcenter content, in my application i am uploading document, the uploaded time it is showing is in GMT , and on oracle webcenter content i am getting uploaded time in Indian Standard Time that is

  • CWgraph - how to set db in Y-Axes

    Hi, I would like to use the CWGraph component to display the frequency domain of a signal.    Please see the attached photo for the desired result. I couldn't find how to set the Y-axes to db scale. Please help Thanks Rafi Attachments: Freq domain.gi

  • Can't drive mapping with jre1.4.2_11

    I need to drive mapping with jre1.4.2_11 in Windows applications but I can't. If you change the file java.policy with all permission then the drive mapping works properly. But if you want to add permission only for the drive mapping?? Anyone knows ab