Flashing Black Screen

Several days ago, Windows XP updated, and my iPod was plugged in to charge. The update did not work as expected and my computer didn't work for several days. Afterward, I unplugged my iPod properly, disconnecting it first from iTunes and secondly from my computer, and later, I realized that there was something wrong with the screen. Most of the screen turns black except for the top part with the date and time. Other times, black bands flash across the screen. The sound still works, and there is no other problem with the iPod besides that, but it's concerning to me.
I tried all five R's, and even restore didn't help. I'm worried that my computer caused some damage when it didn't respond to the updates properly, and I'm wondering if there's anything I can do besides find an Apple store and have it serviced, since I don't want to spend the extra money if necessary.
Fifth generation, color, movie iPod   Windows XP Pro  

Update your video card driver from the GPU maker's website (NOT Microsoft or a system builder).

Similar Messages

  • CS4: Flashing black screens between clips after exporting

    I'm having some trouble with a particular project when exporting video, and I can't seem to track down the cause. The primary problem is flashing black screens between clips, with the additional problem of occasionally having a clip that I fade to be completely black (ie, the first clip just fades to black instead of fading to the second clip).
    I say "occasionally" because the problem seems to migrate depending on what I do to try to fix it. I've noticed that if I shift the clips .1 seconds one way or another where there is a black screen, it will sometimes fix the problem, but when I fix one of them the exact same problem will pop up in another place where it didn't exist before. I can also export a few seconds of video where the problem occurs independently of the rest of the project and the issue won't occur, but will then reoccur in the same place if I export the project as a whole. All of the video is from the same source and is in the same format (.MOV from a Canon 7D). I've edited plenty of other stuff from the same source on the same computer, and the only other time I've seen this problem it's been fixed by just shifting the clips a little bit in the timeline as mentioned above. If anyone can suggest ANYTHING I can try to troubleshoot this problem I'd really appreciate it, because right now this is driving me up the wall.

    I've been exporting to h.264 exclusively so far. Below is a screenshot of where one of the offending screens appears between the two clips on the timeline (the yellow in the bar up top is there because I had stepped that clip back .1 seconds like I mentioned earlier and not re-renered the sequence). I've also verified that this particular spot shows no black screen on the Program Monitor - it's a completely smooth jump from one cut to another. Please let me know if you see anything that might be causing this!

  • Flashing black screen hp pavilion dm4

    For a few weeks/months (since mid august) now my laptop (hp pavilion dm4-2070us) has been flashing a black screen every so often, sometimes repeatedly within a few minute time span or there could be hours at a time that it does not flash. Also, only parts of the screen flashes black not the whole thing. I have taken it to the store I bought it from and another store and they said it could need a new screen, but I am not sure if this is a hardware problem. The laptop has no water damage and no other external damage. I do not know if this is a sign of a crashing computer.
    Thank you for your help!

    A flashing screen is usually a hardware problem, along the lines of a damaged ribbon cable. However, there are a few things you can try to resolve the issue. Try the steps in this document and let me know if any of those help.
    Please click the white star under my name to give me Kudos as a way to say "Thanks!"
    Click the "Accept as Solution" button if I resolve your issue.

  • Flashing black screen when pasting?

    I have a student that when she pasted some image (jpg) and text elements from  from one indesign cs4 document to another the indesign window would flash black then part of what she was pasting would appear. Then it would flash black again and the rest would appear. It happened several times in a 50 min class period. Any idea what could be happening?

    Yeah all the computers are imaged the same at the beginning of the school year. I'll run some diagnostics over the weekend to see if I can better pinpoint the issue if its not InDesign specific.

  • Flashing Black Screen with White Apple Curse

    Hey everyone!
    I haven't updated my ipod in such a long time that I decided to do it over the weekend. I have way more songs than before and I've also added podcasts. However, after syncing everything, my video ipod (80GB) went into the black screen white apple phase. I can hear the hard drive go on and off and it goes on in an endless loop. I've managed to put my ipod in disk mode (for charging) because the regular reset did not help. I also uninstalled and installed iTunes. After this, I did the restore in iTunes and it seemed to work (for now) because there's really nothing in my ipod. It is when I start syncing that my ipod becomes my dilemma. After the sync completes, it goes back to the black screen white apple phase that I came to know as a curse. Will someone please tell me what's going on?
    Cheers!
    -x2uiw

    I know for sure lots of people have the same problem with iPod 5th generation.
    About me everything happened when I updated my iPod 160gb from 1.0.1 version to 1.0.2 version by the latest iTunes 7.5 version.
    Until now anyone has been able to help me.
    Personally I am looking forward a new update software.
    I guess it would be helpfull to repair any corrupt files.
    If anyone have a tip in this matter is very welcome.
    Message was edited by: ubx

  • Screen flashing/black screen for 1-2 seconds - 7850 power edition 2gb/OC

    I recently bought the MSI R7850 Power Edition 2GD5/OC. I have installed amd catalyst 12.10. I have no issues while playing games...the only game i have played since i bought the card is prototype 2 (all settings set to high). The problem is while browsing or when not playing my screen flashes (just once - screen becomes black) for about 1-2 seconds. This does not happen regularly, but quite a few times.. i have uninstalled and re-installed the same catalyst version twice (downloaded from different sources - one from msi and the other from amd). The problem still persists.
    Board: ASUS P8-H67-M PRO
    VGA:   MSI R7850 Power Edition 2GB DDR5/OC
    PSU:   Cooler Master GX550 550W (44a 12v rail)
    Intel Core i5-2500K Sandy Bridge 3.3GHz (3.7GHz Turbo Boost) LGA 1155 95W
    MEM: Corsair 1333 8gb (2x4gb)
    HDD: Seagate 500 GB 7200 rpm
    Thanks.
    OS: Windows 7 64bit ultimate.

    I've experienced the same issue exactly as described, with the R7850 Twin Frozr OC Edition. However, I've also experienced a crash or 2 in which the screen goes black and the monitor goes to sleep. The computer doesn't wake up and I'm forced to do a hard reset. One such event was severe enough that I was unable to restore Windows 8 and had to do a full reinstall...!)
    Everything is clocked at factory default, passes Memtest 86+, Prime95 overnight run, even FurMark successfully...
    Board: ASUS P8Z77-M
    Bios:   American Megatrends Inc., v1708
    VGA:   MSI R7850 Twin Frozr III 2GD5/OC
    PSU:   Seasonic X-750 (+12V@62A)
    CPU:   Intel Core i5-3750K
    MEM:   Samsung DDR3 PC1600 8GB (2x4GB)
    HDD:   WD 500 GB 7200rpm
    COOLER: GPU: Stock. CPU: Xigmatek SD1283 Gaia w/Scythe 120mm Slipstream PWM
    Sound card: Creative SoundBlaster X-Fi XtremeGamer
    OC:     No overclocking, factory default.
    OS:     Windows 8 Pro, 64-bit
    When I tried to save the GPU-Z BIOS settings to a file, my computer crashed my computer (!)... Hopefully this is sufficient to indicate if I should follow the same steps or if this is a different issue / hardware issue / ???
    TechPowerUp GPU-Z 0.6.7
    Driver Version: atiumdag 9.2.0.0 (Catalyst 12.10) / Win8 64
    BIOS Version: 015.017.000.000.000861 (113-C4030400-100)
    edit:
    S/N: 602-V273-010B1210251006
    Also updated format of table above
    (Perhaps worth noting that the box didn't include any driver CD for some reason)
    Thanks for the help.
    -DH

  • Installing Adobe Flash, Black screen in Windows XP, I have tried both Chrome and Firefox, same result

    YOUR SYSTEM INFORMATION
    Your Flash Version
    Not installed
    Your browser name
    Firefox
    Your Operating System (OS)
    Windows (XP)
    I have tried the touble shooting and it says not installed. This is the window:

    Hi Erin,
    Please try using the offline installer posted at the bottom of the Installation problems | Flash Player | Windows page, in the 'Still having problems' section.
    Maria

  • Hp cap lock flashing black screen

    I have hp envy dv6 7229wm windows 8.     Cap lock blinking and wirless on/off orange light solid. things that i already did -Hard Reset unplug a/c and remove battery hold the power button for 30 sec-Hard Reset with removing cmos battery-replaced rams with places and tried new ram-cleaned fan out-applied thermo cream to cpu-and ofourse checked that my warraty status: EXPIRED i am a technician with 5 years experience in hardware and software repair. I never had this problem before.i had 4 customers called me last week about this problem and i told them it was above my head. 

    Hello cantfigureout, Thank you for providing your information, and welcome to the HP Forums! I hope you enjoy your experience! I have read your post on how your notebook computer's keyboard is displaying a blinking cap lock key and wireless light, and I would be happy to assist you in this matter! The blinking light on your Cap lock is indicating a specific hardware issue, which can be found out by following this document on Computer Does Not Start and the LEDs Blink or the Computer Beeps. Please re-post with the number of blinking lights the Cap Lock key produces, and I look forward to your reply! Best Regards

  • HELP: Bootcamp wont start up anymore.. ( Black screen with flashing cursor)

    Today i tried to boot up my Windows VISTA partition with bootcamp and I always end up with a black screen with a flashing cursor. I already tried several times but still no luck..
    Strange thing is I can still boot up my Windows Vista partition in Parallels on Mac... But after u reboot and try this with bootcamp again the black screen with the flashing cursor.
    I search on the internet for a fixes or solution but no luck, and i don't want to reinstall every thing on my windows partition again..
    also tried the cmdalt+PR thing on startup without any luck and i have no clue what this problem is causing.. i only remember installing the last updates for my mac with the new App store feature but don't know if that could cased any problems.. it looks like a firmware problem or something to be honest i really don't know..
    Can someone help me? or figure this out? any fix for this?
    thx
    Message was edited by: Mattieshark

    Ever Google (or Bing)?
    http://windowsteamblog.com/windows/archive/b/windowsvista/archive/2006/12/05/win dows-recovery-environment.aspx
    http://www.informationweek.com/news/windows/showArticle.jhtml;?articleID=2000003 29
    http://www.bing.com/search?q=Vista+recovery
    In brief, did you ever think to boot from Vista DVD?
    And you might want to look into programs to backup / clone / and provide system restore capability.

  • Adobe Flash Player don't show videos on YouTube after some point - Black Screen only

    Hello. I have a problem with Flash Player on YouTube. It has crashed many, many times so I decided to open this thread for let you know about it if you don't know already.
    Now, I've got no crash reports or anything but it crashes after some point. Even if it doesn't give me crash report, I understand it because YouTube videos don't run and I got only black screen. When I tried to close (click "X" at right above) Firefox, it denies to close with some click sounds. I can only close with combination of CTRL+ALT+DELETE and terminate process. After I closed Firefox and open new page, it works fine until I get the same situation.
    By the way, I have laptop with these specs:
    Intel Core i5 3210m
    AMD Radeon 7670m + Intel HD 4000 ( with AMD Switchable Graphics called Enduro )
    8 GB Ram
    Windows 7 Ultimate 64 bit
    I don't know what problem is causing it so I couldn't give you much information. But if you need any information, I'll try to help. Thanks in advance.
    P.S: I'm sorry for the bad English.

    Thanks for your reply. I totally forgot the topic, sorry.
    I've solved the issue, just disabled hardware acceleration feature from Preferences menu and everything is working well now.
    http://helpx.adobe.com/flash-player/kb/video-playback-issues.html

  • Black Screen, Grey Screen, then flashing question mark, now frozen....

    hi everyone,
    i know i have probably the most common problem - and i've tried to read all about the logic board problems which i'm fairly certain i have.
    I realize i will most likely have to buy a new macbook - but before i do - i need to retrieve files that are on my ibook g3 (bought in early 2003).
    This is what has happened in the past 2 days:
    1. I can hear the power start up (and chimes) but screen is completely black.
    2. Tried resetting PRAM and PMU, now blank grey screen sometimes appears.
    3. Now, grey screen with flashing question mark in the middle alternating with mac face. So i assumed this meant it couldn't locate my hard drive. So i found my ibook install disc and inserted it and restarted while holding down "C" key.
    4. Grey screen - with Apple (thought this was success) - then it turned to a large grey circle with a line through it (a slash). And then suddenly frozen.
    Since then it has just been a lot of lines through the screen alternating with completely grey screen, etc. along with any of the above-mentioned outcomes. I tried pushing on the lower-left-hand corner of the computer and yes, it affects the display - more or less lines, etc.
    How can i get my old files off of it? Do i buy a new macbook and connect them via fire wire cable and try that way? or will that not work if the above is happening? Or is it possible for someone (myself or perhaps IT professionals) to remove the hard drive from my old ibook and place it somewhere where i can copy over the files?
    Any help is appreciated - i know this is a popular topic - i've just had so many weird outcomes in the past 2 days i'm not exactly sure which solution (if any) would work for me right now.
    Thanks so much!

    Hi Ronda -
    I do have access to another mac (mini) with firewire at my work. Or I might go out and buy a new macbook this weekend as well (preferable since I don't really want my personal files on my work computer, etc.) But yes, i need to get my old files off of this one.
    I have never added additional memory or anything to it really since I got it. So it should be the original specs:
    iBook (14.1 LCD 900 MHz 32 VRAM)
    256MB memory
    Combo (DVD-ROM/CD-RW)
    Hard drive: 40GB
    Not a lot of space was remaining if i recall. I did get the 'disk full' notice a few weeks ago, but i did end up deleting a lot of stuff. Needless to say, i'm sure it was quite full, but not at maximum when this happened.
    Update: Last night i tried to start it up again, and it would ONLY go to a black screen this time (ie. no display at all). What do you think i should do?

  • Adobe flash will not load - gives only a black screen

    For all the (3) users on this computer.   For most browsers (Safari, Chrome, Firefox) The browser window goes 100% BLACK when a flash program link is opened and most of the time the cursor / Pointer freezes (occasionally disappears and all keyboard actions are blocked.  Have to force quit or kill the box with the power key (which always bothers me.)  No Adobe links work directly via the link in mail or in browser.  Symptom in Mail is either the original window goes BLACK or a separate window opens in Black.
    Current OS X 10.9.3 (13D65), Memory 4GB on 2.4 GHz Intel core i7 in MacBook Pro  15" Late 2011.
    Relevant?? Items:
    1.     The Adobe company checking device says Flash is not loaded.  I have had flash 9, 10, 11, 12, & 13 working before the latest of   OS X upgrades were made.
    2.     An aside, I recently (4 months ago) used a MacKeeper app.  Today (not used except for information gathering) the "System Scan says my ProtectMac anti-virus is active and no security problems noted.  Also noted was "Serious" issue relating to one of 128 issues (474.3 MB of 'junk' files-36.9 MB in 'Logs", 437.4 MB in Caches.)  "Performance" listed as 'Fast.'  No action is taken and System Scan app closed.
    3.     I seem to have lost my copy of Flash 13 in the Applications folder and the install file tries to load  "AdobeFlashPlayerInstaller_14_ltrosxd_aaa_aih.dmg"
    This makes sense as to item 1. above. 
    4.      Another user loaded adobe flash 11 from a download file called, "AdobeFlashPlayerInstaller_11au_ltrosxd_aaa_aih.dmg."  I do not understand the meaning of  the part of the file name that reads "_11au_" as it seem to differ from other downloads for "_11eu_".  Additionally the copy retained is filed in history and had only the user permissions of one user.  Also that copy _11au_ has no mention of Browser Type in the name description of the .dmg file; but the "_11eu_" does mention Safari browser.   Since it was from July 8, 2013 I assume it doesn't matter and it should have been superseded by Flash 12 OSX.  Mentioned here only for interest.  Also, It may have been saved on this computer in case of rebuild for another user on the home network running 13" MacBook Pro 10.6 Leopard.
    5.  Attempts to reload Flash 13 from 'AdobeFlashPlayerInstaller_13au_ltrosxd_aaa_aih.dmg' as the "Adobe Flash Player Installer" connects to the latest version not yet installed and keeps downloading the Flash 14, which fails and locks up the browser.
    6.     The download from get,Adobe.com starts out O.K.  After the installer file.dmg completes well, Step 2. is to open it, that, too, works well with an open window of a mounted device on the desktop.  The next step is to double-click the icon.  That only works so far.  A window opens and it has a progress thermometer but it never downloads any product and the link is declared "unavailable" immediately.  Refuses to load and will not always give the pointer back or let the browser continue.
    7.     While creating this 'Summary' something changed.  Using Spotlight I found a different version of Flash Installer on my Mac.  I clicked it to go to the Black screen after installer download competes and got a totally different response.  I was set to take snapshots of the windows as they progressed.  The ".dmg" Icon on the desktop changed from default plain white disk to the red "Flash Player" I had not seen for last 40 days. 
    Pic 1.     Pic 2.   
    Pic 1. is the desktop device icon.
    Pic 2. is the Installer.
    Pic 3. is the Acceptance popup.  ~~Note: This popup shows a backwards rev dated March 4, 2012!  today is 10 July, 2014.
    Flash Player 11.6 is installing after acceptance of License.
    Everything went normally and loaded but I cannot test it as all browsers were closed. 

    Please read this whole message before doing anything.
    This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
    Step 1
    The purpose of this step is to determine whether the problem is localized to your user account.
    Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
    While logged in as Guest, you won’t have access to any of your documents or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this behavior; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
    Test while logged in as Guest. Same problem?
    After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
    *Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
    Step 2
    The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
    Please take this step regardless of the results of Step 1.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
    Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2.

  • My MacBook Pro just turned itself off while installing Windows 7. It has now got a black screen with a white flashing bar in the top left corner...what can I do?

    I was just installing windows 7 onto my MacBook Pro. I selected to have 200GB for Windows and the rest leave for Mac.
    I clicked install and the bar filled up as it should do. However, once the install had completed, my MacBook turned itself off. I assumed this was normal. Now, my MacBook has a black screen with a white flashing underscore in the top left corner.
    What is wrong and what should I do?

    Hold down the Option key when starting up then on the sceen that comes up select Mac OS X to boot from.
    The Win 7 install didn't go well and is hung in some way. You should use boot camp assistant to remove the win partition and start over.
    Make sure you are using a Retail version of Win 7. A Branded OEM version, like ones from Dell and HP, will NOT work to install Windows 7 on your Mac.

  • How can I fix my App Store on my iPod. When I go to the App Store and click on updates then click on purchased it won't load up the purchased apps. It says its loading then it flashes black and goes to my home screen. How can I fix it

    My iPod has a glitch in the App Store. When I go to the App Store and click on updates then click on purchased it won't load up my purchased apps it says it is loading then it flashes black and goes to my home screen. How can I fix it??

    Have you udated to iOS 6.0.1?
    Otherwise
    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.

  • Tecra M2 - black screen with the cursor flashing

    Hi guys,
    Im hoping someone out there may be able to help me fix my laptop.
    Ive read a couple of posts but not sure they can help me.
    When I swicth on my Tecra M2, I just end up with a black screen with the cursor flashing in the top left or I get a screen filled with alternating 0's and 1's.
    Sometimes the TOSHIBA splash screen appears with the boot options, other times it doesnt.
    I cannot boot to CD and it wont boot to the HDD. Ive taken the HDD out and the CDROM out but it does the same thing which to me suggests that its not getting through the BIOS even as far as the boot sequence.
    Does this sound like BIOS failure to you and do you know of a way to fix it? Ive tried taking the battery out, powering off and starting again but the same thing happens.
    Any advice would be be appreicated.
    Thanks,
    Ross

    I have had this twice now and in both cases it was caused by a faulty HDD - to confirm that the motherboard etc is still OK load the recovery CD in the DVD drive (or even better a freestanding XP disc), press F2 on startup and shift the cursor under the DVD drive as the boot drive.
    If the motherboard etc is OK you will get the reload instructions (from the recovery disc) or a Windows install screens (from the XP install disc).
    Satisfied that the machine at least works - replace the HDD and recover from the recovery disc or try a Windows repair from the recovery console (from the XP install disc with the HDD still in place).
    In my cases I was forced to recover to a new HDD and then rebuild the machine from backups - I now clone the HDD when rebuilt.

Maybe you are looking for