Flashing File icon with '?' does NOT mean your HDD is shot!

A week ago my computer failed and started up showing the flashing file icon with the '?' at startup. I ran all the diagnostics that every forum told me to. I even reset the PRAM. So I went to the mac store and they told me it was probably the HDD but that it could be just the SATA cable but there was no way to tell unless I had another HDD. So I went out and bought a 500GB for $65 and installed it. Sure enough the problem was only my SATA cable. Apple sold it and installed it for only $32. They also installed OS X for free.

I'm currently having the same problem. Flashing ? folder..troubleshooting..etc. According to everything I've read, it seems like my HDD is shot. When I boot from my OSX disc, I can't detect the HDD to install, restore, or anything. Yet, I've taken the hard drive out and it spins normally when I boot or launch the OSX disc. Do you still think it could just be the SATA cable?

Similar Messages

White screen with flashing file icon with question mark mean

What does this mean. We are getting a white screen with flashing file icon with question mark inside the file.

It almost certainly means it can't find a bootable volume (one with OS X on it).
Which means most likely you will have to find your original system installation DVD and install it. Then you should figure out what caused the problem.
Read this to diagnose it before resorting to reinstalling the OS:
http://support.apple.com/kb/TS1440
Excerpt:
Additional steps
If your Mac still starts to a flashing question mark, follow the steps below. If any step resolves the issue, you don't need to continue to the next one.
Select your Mac OS X startup disk with Startup Manager by restarting and holding the Option key. After your Mac starts up, restart again to verify that the flashing question mark does not appear.
If the issue persists, insert your Mac OS X installation disc. Be sure to either use the disc that came with your Mac, or, if you installed a later Mac OS X version from disc, use the newer disc.
MacBook Air note: On a MacBook Air, there are two options for starting up from Mac OS X media: Either connect a MacBook Air SuperDrive to the MacBook Air via the USB port and restart the computer, holding down the C key during startup, or use Remote Install Mac OS X to startup from a system software DVD that's located on a partner computer. Once started up from Mac OS X media, skip to step 3.
Restart the computer, then hold the C key during startup.
From the Utilities menu, choose Disk Utility. Don't click Continue.
Select your Mac OS X disk (named "Macintosh HD" by default) in the left side of the Disk Utility window.
Click the First Aid tab.
Click Repair Disk to verify and repair any issues with your Mac OS X startup disk.
After repairing the disk, try to start up normally.
Important: If Disk Utility finds issues it cannot repair, you may need to back up as much of your data as possible (or use Time Machine to back up to a different disk), then erase the disk and reinstall Mac OS X. You should back up important files and data before erasing a drive. Erasing deletes everything on the hard disk (including things on your desktop). Also, you can install Mac OS X onto an external disk, start from the external disk, and use Migration Assistant to transfer items from your usual internal Mac OS X startup disk to the external disk, then erase the internal disk and reinstall Mac OS X.
If the issue persists, and Disk Utility didn't find any irreparable issues, quit Disk Utility, quit the Installer, select your disk when prompted, and restart.
If the issue continues, reset PRAM. Note: After resetting PRAM, if the computer starts up normally, reselect the startup disk in the Startup Disk preferences.
If none of these steps resolve the issue, start up from the Mac OS X Installation disc and reinstall Mac OS X.

Flashing File Icon with Question Mark Upon Start-Up

Today when I went to use my computer (which was already on) it went blank and then came up with a gray screen with a flashing file icon with a question mark in the middle of it. I have already troubleshot things with several forums online and nothing has worked. I have tried to restart in Safe mode, single user mode, verbose mode, and tried to get on using my option key which got me to an internet login screen finally. I tried to log in and eventually got to an apply.com/support screen with -1007f underneath. I am not 100% which operating system I am on. I know that it is Mac OS X and pretty recent. Please respond if you can help!

Reset the SMC and PRAM
Intel-based Macs: Resetting the System Management Controller (SMC)
About NVRAM and PRAM
To boot from DVD:
Press C during startup
Start up from a bootable CD, DVD, or USB thumb drive (such as OS X install media).

White screen, showing a flashing file icon with question mark??

Having issues with the above, please help

Flashing ? mark means it can't find the Disk it thinks it's supposed to boot from, or the Disk is muxed badly.
If 10.7.0 or later...
Bootup holding CMD+r, or the Option/alt key to boot from the Restore partitirion & use Disk Utility from there.

Got a white screen with flashing file icon

Why do I have a white screen with flashing file icon with question mark inside?

It means your iMac cannot located a valid system to boot.
Insert the CD that came with the iMac and allow it to boot. Once it gets the point where it's offering to install the OS, go to the top menu and choose diskutility. Perform a repair on the main drive "Macintosh HD".

Flashing file icon w/ question mark at start up

My MacBook had been working fine on Tiger since I bought it last august, and a few months ago I installed Leopard, which also worked great except for safari freezing up every once in a while. But today when I tried to start it up and the blue screen appeared, it stayed like that for about ten seconds, and then a flashing file icon with a question mark appeared. I have no idea what it means, I can't make it startup. I've turned it on and off a few times, hoping for the best, but nothing. This computer is not even a year old, any help?
Thanks in advance.

Welcome to the Apple boards:
Your first hint that something was wrong was when Safari started freezing.
You may have a bad HD or at least one that is going bad.
Boot into the Leopard DVD and in the menu select Utilities and disk utility and repair HD and permissions.
See if that helps.
You may need more powerful tools such as DiskWarrior to repair the drive if it's flaky.
If the computer is less than a year old, you may be able to get it fixed at a local Apple store.

What does a flashing folder icon with a "?" inside mean?

What does a flashing folder icon with a "?" inside mean?

Question (?) Mark, Blinking Folder, or Gray Screen at Startup
These are related but not identical issues. Their causes are outlined in Intel-based Mac- Startup sequence and error codes, symbols. Solutions may be found in:
A flashing question mark or globe appears when you start your Mac
Mac OS X- Gray screen appears during startup
In most cases the problems may be caused by one or more of these:
a. Problem with the computer's PRAM - See Resetting your Mac's PRAM and NVRAM.
b. Boot drive's directory has been corrupted - Repair with Disk Utility.
c. Critical system files are damaged or deleted - Reinstall OS X.
d. The disk drive is physically non-functional - Replace the hard drive.
Note that the information I have provided is what Apple recommends, If other users suggest different solutions than found here, then be sure what they recommend does not impact on your warranty, if any, or ability to get continuing Apple service.
Please don't start removing drives or changing cables unless you know what you are doing and have exhausted other non-invasive alternatives outlined here. If you perform any work yourself that is unapproved by Apple, then you will void any warranty you may have and lose all further Apple Support.
Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
The main difference if you are using Lion or Mountain Lion is that you must first boot from the Recovery HD. Simply boot from the Recovery HD to perform the above.
Reinstall Snow Leopard Without Erasing The drive
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install Mac OS X 10.6.8 Update Combo v1.1.
Reinstalling Lion/Mountain Lion Without Erasing The Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

My iMac has a white screen with a flashing file folder with a question mark in the middle. What does that mean?

My iMac is completely unresponsive. Whenever I restart it, it's just a white screen with a flashing file folder with a question mark in the middle. What does this mean?

this means the mac cannot find the startup disc. which more times than not means you need a hdd replacement.
try starting holding the option key, then using utilities try to repair the disc.

What does it mean when there is a flashing file folder with a question mark when trying to start computer?

When I try to start my computer a flashing file folder with a question mark is on the screen. I can't open anything up. What does this mean?

There are four general causes of this issue:
1. The computer's PRAM no longer contains a valid startup disk setting when there aren't any problems with the disk itself. This can be checked for by pressing the Option key and seeing if the drive appears.
2. The internal drive's directory structure has become damaged. This requires usage of an alternate bootable system to perform the repair.
3. Critical system files have been deleted. This requires usage of an alternate bootable system to reinstall them.
4. The internal drive has died or become unplugged. This is the most likely case if the computer took a sharp impact or there are unusual sounds coming from its location.
(104258)

What does a white screen with a flashing folder icon with a question mark in it mean?, what does a white screen with a flashing folder icon with a question mark in it mean?

My computer seemed locked up, nothing would open. I had to force quiy everthing. I tried to normally shut it down and it wouldnt shut down. I held the on off power switch. When I tried to turn it back on It stays tuck on the white screen with a flashing folder icon with a question mark in it . Has my hard drive gone bad?

Reboot the computer holding the option key down, you will get a selection of your OS X internal boot drive or the perhaps the disk you stuck in.
You can choose what you can boot into.
If it's the hard drive and it's there, then select that and head to System Preferences and change the startup disk to the hard drive, you shoudl be fine.
If only to disk, then select that and run Disk Utility > Repair, If your drive doesn't appear on the left, it's likely dead.
Repair the drive and reboot holding the Shift key down, see if that fixes things some more and reboot again normally.
https://discussions.apple.com/community/notebooks/macbook_pro?view=documents

MacBook Pro flashes file folder with question mark and startup manager will not run

My son's MacBook Pro won't boot (gets the flashing file folder with question mark). When I try to open startup manager (holding "option" key during boot does not do it). Other posts suggest inserting the install disk, but I am pretty sure that for Lion, there was no disk, it was just off the website through the App Store. Any further suggestions?

Reinstalling Lion/Mountain Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

Opening psd file in Photoshop coming up with "could not complete your request because of a program error"

I spent roughly 6 hours on a (motion) project in Photoshop, saved as psd, and now every time I try to open it, it comes up with "could not complete your request because of a program error". This really annoys me, for one, it DOESN'T TELL ME WHAT ERROR! How can I get help from Adobe if they have no clue what error it is?
I'm running windows 8.1 64 bit
I'm using Adobe Creative Cloud
I've tried everything people say to do, but nobody else but me seems to be using Photoshop for video editing. I really need this video.

Does anyone have any other ideas as this is very frustrating.
Thanks,
James

When i try to open itunes ,this written appears :"The iTunes Library file is locked, on a locked disk, or you do not have write permission for this file. "What does it mean?

when i try to open itunes ,this written appears :"The iTunes Library file is locked, on a locked disk, or you do not have write permission for this file. "What does it mean?

To solve this issue all I did was check to ensure that the file permissions were set as described by the earlier posts, followed by simply deleting the iTunes Library Genius.itdb file. Once the file was deleted I was able to open iTunes without difficulty. Note that I am running Windows 8. Hope this helps!

After entering the redemption code from Adobe Photoshop CC, I keep getting an error saying "This card was purchased in a country that does not match your Adobe ID. You can try signing in with a different Adobe ID or get in touch with us if you need help."

Hi. I'm a Mac user. After entering the redemption code from Adobe Photoshop CC, I keep getting an error saying "This card was purchased in a country that does not match your Adobe ID. You can try signing in with a different Adobe ID or get in touch with us if you need help." What should I do?

Did you purchase the software in another country than where you live?

"Visual Studio Online does not support your browser. Please upgrade to a supported browser to ensure a fantastic experience" message with IE 11

Hi All,
I have recently migrated from TFS 2010 to TFS 2013. When developers are accessing TFS Web interface from IE 11 they are getting message "Visual Studio Online does not support your browser. Please upgrade to a supported browser to ensure
a fantastic experience!" and page is not showing up correctly. I can open Web interface from Chrome without any issues. Also I figured out if I open Developer Tools (F12) in IE Web Interface also works fine and screwed up again
when I close Developer Tools.
What can be wrong with IE11 settings?
Regards,
Oleg

Hi Oleg,
Thanks for your post.
You’re using TFS 2013 Update 4 now?
Please share your IE 11 screenshot within this error message here.
Have you use the TeamCompanion in your TFS Server? If yes, please refer to the solution in this article:
http://www.teamcompanion.com/blog/.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Flashing File icon with '?' does NOT mean your HDD is shot!

Similar Messages

Maybe you are looking for