Flashing LED problem

I'm a new blackberry user. And I accidentally wiped my phone. And after that, my flashing led at the upper right of my phone won't blink anymore. Before I accidentally wiped out everything, it was still blinking. Does anyone know how to turn it on? I looked everywhere in the option section of my phone but I can't find it.

Hello Kababayan!
Welcome to the Community
The LED notifications are not anywhere in options as they are placed under Profiles. Edit the Profile and go to Change Sounds and Alerts and inside each would have a setting for LED Notification.
Goodluck and Enjoy
Ron
Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up Blackberry Battery Saving Tips | Follow me on Twitter

Similar Messages

When did these flash player problems begin?

So, I had a computer running Win98 and IE6, which worked
great until Flash Player 8 autodownloaded about 4 months ago,
causing the beginning of an extreme headache. Several
communications with Adobe support (they eventually stopped
responding) over several weeks went nowhere None of the fixes
suggested by them, nor the ones here worked. Countless manhours led
me to think it was time to bite the bullet, buy a new computer. So,
as of two months ago I have a new computer running XP and IE6 with
SP2. I didn't know it until today, when I started having crashes,
but I have Flash Player 7.0.19.0. When i go to Adobe's Test page,
both Shockwave and Player windows show the animations (and no
crash).
On certain pages, which I believe have flash content, I get
the "IE has experienced a problem and must close" message. It
specifically mentions the flash.ocx file as the offender. It is
repeatable when visiting certain pages.
So, before I jump into the abyss of attempting to fix this, I
am wondering when these types of problems began. I have been using
Windows and IE since 1998 with no trouble until this year. I hoped
moving to a new computer would solve my Flash compatibility
problems. Could the root problem be new types of spyware, etc that
change something in the registry? Some of the fixes suggested by
Adobe were regarding keys changed in the registry. Unfortunately
those fixes didn't work (in Win98).
Finally, does anyone know if attempting to fix flash player
under XP is any easier than 98? Also, I will admit I may have
visited some sites recently that downloaded some adware, etc. Any
suggestions on cleaning that may solve the flash player problem? I
know this post is all over the map - I don't know where to begin...
Thanks in advance, Don

Hi
Which browser is giving you the error? Is it IE11?
Are you saying when you go to Adobe's website and download flash player it gives you an error?
Hope this helps. Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Rapid green flashing led on airport extreme

I have just plugged in my Airport Extreme after not using for a year and it has a rapid green flashing led status light, the Airport utility does not find it so I assume that there is a hardware problem? Does anyone know what a rapid (very) green flashing light means?

Unfortunately, a rapid green flashing light is usually a symptom of an internal power supply failure. If you have an Apple Store in your area....suggest that you take it to them to let them have a look.
Otherwise, you can contact Apple Support directly at http://www.apple.com/support/contact/

Flashing led

Hey, i'm new to Labview and i have a problem to do... i'm finding a little problem in creating a flashing led :
If you have chosen “flashing” from the switch, then the LED should light up for a time equal to the value of the “ON TIME” control and then the LED should turn off for a time equal to the value of the “OFF TIME” control.
any help will be very much appreciated
regards,
karamdeek

Karamdeek wrote:
is it possible to do it using a flat sequence containg the wait time ?
Flat sequences are frowned upon as there's almost always a better way to solve sequencing problems with proper program flow.
I think this part of your problem is to help you learn about shift registers and structures within structures. These basic skill are required when you want to control a logical flow of events.
I'm probably giving away too much here but look at the pic and try to figure out what is in the other cases that make this VI work. Once you do, break it down into small steps or draw a flow chart and see how the labview structures mimic the decisions you have to make to cause the LED to flash as your requirements specify.
Good Luck!
Using LabVIEW: 7.1.1, 8.5.1 & 2013
Attachments:
LEDflash.JPG ‏49 KB

Another Dead iMac - Flashing LED!

I have an iMac 700 which recently died. The display froze and upon reboot the screen would only show a faint raster - no chimes, no grey screen, just a faint repetitive buzzing noise. Most curious, though...the power button LED was flashing: 4 short flashes followed by a long flash (or vice versa). Anyone have any idea what my dying iMac was trying to tell me?

Usually, a flashing LED pattern means bad memory. But not in this case, as your memory was fully working before the problem occurred.
Typical problems that will cause this kind of symptoms, in order of things to try:
1. Replace the mainboard battery and then reset PMMU and clear PRAM contents. See if this clear it up.
2. Leave it unplugged overnight and see if you can get it to boot first thing in the morning.
3. Follow the Apple troubleshooting guide and test for voltages, to ascertain whether it is a power supply problem.
4. Repetitive buzzing noise and no video suggests it could be the iMac 'flyback transformer' problem. My understanding is that affects only the early (233-500 MHz) versions of the iMacs, but I could be wrong. Search the forum for more details about the flyback transformer problem, which is a monitor problem that I am told is expensive to fix.

Adobe Flash Player Problem: "Movie Not Loaded"

new user to mac.
i'm getting more and more frustrated with this computer.
what's bugging me the most right now is
i am unable to view videos on certain websites.
rather than showing the content,
a white box appears.
when i right click on the white box,
it says "movie not loaded" (in gray) and adobe flash player 9 (in black).
i can't click on the gray line.
when i click on the black line, it brings me to the adobe website and tells me adobe flash player 9 has been successfully installed.
i am fairly sure this has nothing to do with heavy traffic.
any insights on how to resolve this issue?
cheers.

Adobe Flash Player Problem
http://www.adobeforums.com

Strange flashing cursor problem

Hi,
I've just finished installing Vista 32bit on my Macbook Air (1.6) and its working fine apart from one small problem - when starting up it freezes on a black screen with a flashing cursor for 2-4 mins and then will start loading Vista fine. Once in there is no problem and its stable and what not. I have had a look at some on the articles on here and other forums and the flashing cursor problem usually refers to when people try to first install a MS OS and not once one has been installed successfully.
I only have to boot into Vista every now and then and only for a few minutes at a time so I usually spend as much time in Vista as it does loading.
Any help appreciated.

General purpose Mac troubleshooting guide:
Isolating issues in Mac OS X
Creating a temporary user to isolate user-specific problems:
Isolating an issue by using another user account
Identifying resource hogs and other tips:
Using Activity Monitor to read System Memory and determine how much RAM is being used
Starting the computer in "safe mode":
Mac OS X: What is Safe Boot, Safe Mode?
To identify potential hardware problems:
Apple Hardware Test
General Mac maintenance:
Tips to keep your Mac in top form
Direct you to the proper forum for MacBook :
MacBook Series Forums
https://discussions.apple.com/community/notebooks?view=discussions
http://www.apple.com/support/macbookpro
Mac OS X Forum
https://discussions.apple.com/community/mac_os?view=discussions
This forum deals with a desktop/tower 65lb Mac Pro
http://www.apple.com/support/macpro
TimeMachine 101
https://support.apple.com/kb/HT1427
http://www.apple.com/support/timemachine
Mac OS X & Mountain Lion Community
https://discussions.apple.com/community/mac_os
https://discussions.apple.com/community/mac_os/os_x_mountain_lion?view=discussio ns
Recovery Mode
http://support.apple.com/kb/HT4718
Unless you did a clean install, and I can't tell what your system maintenance is whether it is what I would do. Backup / clone your system, use ML RECOVERY and erase the system partition and update with just Apple updates, don't restore anything.
Run Apple Hardware Test.
Take it in for a free check and diagnosis.

Flash player problem after updating to belle on my...

flash player problem after updating to belle on my nokia c7.when I try to play .flv videos screen goes blank as show in image,previously these videos runs fine on symbian anna plz help plz help or tell me the way to downgrade to anna
Attachments:
scr000002.jpg ‏10 KB

1) product code 059B7W0
2) software version 111.030.0609
3) it is actually stored .flv files on my phone workes fine on symbian anna
Attachments:
Scr000003.jpg ‏17 KB
Scr000004.jpg ‏15 KB

Pixelation problems occurs in my videos when using adobe flash but using chromes pepper flash no problemes so its definitely adobe problems on my WIndows 8.1

pixelation problems occurs in my videos when using adobe flash but using chromes pepper flash no problemes so its definitely adobe problems on my WIndows 8.1

Problem is:
Flash Player for IE11 (which is the worst browser ever developed - BAR NONE) is a Microsoft product, when it comes right down to it.
Adobe writes the base code and yes, they do collaborate on updates for it, but the gang in Redmond alter the plug-in and add "proprietary" code before embedding it, and at that point it's "their baby".
There are two (2) registry keys - 1 for 32 bit IE and the other for 64 bit IE, as well as a KB patch that prevent all but the most experienced Windows users from ever touching the Flash Player plug-in for IE. So there's NO WAY you could have done a clean install of the ActiveX plug-in in Windows 8. Unless you're an uber-geek, you can only update it through Windows Update.
WIn 8 is an abomination and IE11 made it worse. IE has always been the "problem child" of browsers, failing to handle CSS, Javascript, some PHP and most design "tweaks" that good webmasters can use with other browsers, trouble free.
I have IE8 on XP, 9 on VIsta, 11 on 7, 10 on 8 and 11 on 8.1... but they're all for testing only. I'd have to be out of my mind to ever think of using IE as my primary browser. ActiveX controls have to be disabled formost stuff and that opens millions of security holes in IE.
You've got a good video card and a decent sound card. It's a shame to waste them on a pile of garbage like IE, just because it came with Windows.

Macbook air flash drive problem

my air mid 2012 has flash drive problem cant update and theres written apple would replace it free of charge but theres no official service center in my country what to do?Is it possible that they could send me flash drive or smthing like that

Apple Authorized Service Providers
https://locate.apple.com/country
Best.

[help] Flash cache problem?

Operating Environment: IIS6+ASP.Net 2.0+Flash
Framework / Procedure:
When running, Flash will run ASP.NET program. ASP.NET then
extracts data from the database and generates a XML file for Flash.
Flash reads the XML file and parse it into a readable format
for the users.
Problem:
When Flash displays the XML content and user leaves/exits the
webpage, this process creates a change in the database.
Then if this Flash function is executed again, ASP.NET
generates a new XML file, but Flash still displays the old XML
content.
We discovered that when IE's "Temorary Internet Files"
setting is set to AUTO, the above problem would occure, we suspect
this is related to IE cache.
Is there any way to resolve this Flash cache problem?

Did you try returning the XML via an ASP script?
In other words have the ASP generate an ASP wrapper that
returns XML.
Then if necessary, you can then add a random URL var to the
Flash XML load url variable. "theXMLWrapper.asx?x=" +
getTimer()

Can`t make it start, continuously flashing led

Hi, I have a Power Mac g5 2.0ghz with 4 memory slots. Sudenly I can`t make it start. I get continuosly flashing led without hearing the start bep.
I try:
1) changing the ram
2) changing video card
3) reset PRAM
4) reset SMC
5) cleaning the Ram with rubber
6) using a hairdryer in the motherboard
7) disconnecting the CD Player and Hard Drive
Some times (1 in 20) I can get the machine to start, but when I turn it off it does the same and I get the flashing led.
Power light status
What it means
On and solid
Computer is on and running
2 flashes, pause
No memory (RAM) is installed
3 flashes, pause
Incompatible memory (RAM) is installed
4 flashes, pause
No good DIMM banks detected
5 or 6 flashes, pause
Contact Apple or an Apple Authorized Service Provider
I should contact a service?????
Thanks

I should contact a service?????
Hello, sadly Apple no longer works on G5s, nor has any parts, you might find an independant AASP that might in your area.
If you're sure the RAM is good, try the Hair Dryer trick...
http://discussions.apple.com/message.jspa?messageID=13240047#13240047
https://discussions.apple.com/message/15223603#15223603
https://discussions.apple.com/message/15499912#15499912
https://discussions.apple.com/message/15613068#15613068
https://discussions.apple.com/thread/3270112
https://discussions.apple.com/message/16053892#16053892
No power light at all...
https://discussions.apple.com/thread/3692775?tstart=0
It can show on any G5, and even many other computers & electronic devices of the period.
http://www.macintouch.com/reliability/pmg5.html
http://lowendmac.com/ppc/power-macintosh-g5.html
And see this last one in particular...
https://discussions.apple.com/message/16781690#16781690
Heat gun better...
https://discussions.apple.com/thread/3916312?tstart=0

Which consumes iPhone 5's battery faster? Using text tone or not but using the flash led notication alert?

Which consumes iPhone 5's battery faster? Using:
1. text tone
2. no text tone but using the flash led notication alert
Please reply.

Sounds to me that there is a process stuck and that is what is causing your battery issues. You say that you have restored to factory settings twice in the last 6 weeks. Were those restores from a backup, or a restore as new? If you restored to a backup and the issues are still there, then there is something wrong in your backup. Try restoring the device as new and not add anything to it right away and see if that improves the battery life.
I have a 5S with a push account for work and am dealing with email constantly during the day. I use my phone for upwards of 16-18 hours of the day, including web browsing, iMessages and phone calls. My battery is usually around 65-70 percent at the end of the day, which is only about 2-3% per hour of usage.
The echo deal is a carrier issue, and can depend on towers. I've seen it in the past, but it generally doesn't last long and corrects itself. The voicemail password might require you to contact AT&T to get them to reset your password. If you updated the software on the phone, it can sometimes require that reset. Are you still receiving your voicemail?
The Yahoo thing is Yahoo. I'm certainly glad I don't use if for all the stuff I've read.

Front Panel LEDs problems for Mega 180

Hi, it's rigth one year I got a Mega 180, and I've not ended yet to tune and optimize it
I admit it's like a hobby now
I immediately ask you for my LEDs problems.
I have read many topics and maybe other people have the same my problem, also if I'm not sure if they treat about the Front Panel LEDs when they speak about the "LCD Display".
I have some switched off LEDs in my front panel, in the "time" displayng and in the volume bar: I have to substituite them? Someone have done it before? It's possible to remove the front panel or I have to disasseble all the pc
Or it's a firmware problem?
I also thank all people that cured the section of optical devices compatibility: last week I bought a new Pioneer 111D, because my LG GSA-4167B was not suitable in the PC mode, for DVD playback.
In fact I had many problems for the DVD fluently playback: I have spent 4 months trying new video codecs and also substituting the video card, then I finally have understood that was an optical device problem.
The Pioneer 111D was perfect in the PC mode, but then I had problems for HI-FI playing mode
Then I finally used my old Pioneer 108, that I had in the old desktop, and all work (I pray) fine both in HI-FI and PC mode.
I'll be very happy also to describe to whom that will ask me, my experience with the Mega 180 "assembling", during the last year, hoping it could be useful for other people.
Thanx

> Hi, I'm new to LabVIEW! Ok, what I'm trying to do is create a front
> panel with 9 LEDs. Then I have a Menu Ring, with three different
> options. These options determine the order in which the LEDs are lit.
> So what I was planning on doing was creating three subVIs, one for
> each of the options...but how can I do that when I only have one
> boolean for each LED? So basically how can I relate the LEDs on the
> front panel into the subVIs? I tried using globals - but it seemed
> like that just passed on the state of the boolean instead of allowing
> me to actually change the boolean in the subVI. I hope this makes
> sense...I'm really confused! Thanks for any help!
Initially, you might just hook your ring to a case structure to
determine which frame exe
cutes. You can put the terminals for the
Booleans in the different diagrams and about the only other thing to
keep in mind is that you probably want a delay in the loop.
Greg McKaskle

Installed Latest update - now it wont turn on - just flashing LED

I need help please!
I had my phone since Feb this year. It's been great overall. I've had a few problems with it overheating and draining the battery, but not consistently.
Anyhow, on Wednesday evening, I did a little looking around and found there was an OS update, so I ran it.
Ever since, my phone will not switch back on.
The LED is flashing, but not like before, this time the flashing has a pattern to it: One long flash then five fast flashes.
I don't know what this means.... Obvs I can't get any details off my phone because it wont switch on, so please don't ask me what the update was...
I need help - there's obviously power there, because the light is flashing.
I've tried removing the battery, sim card and micro SD and none of this has helped.

This is a an error message, (you probably already realised that), there seems to be no published list of what these mean but I had a similer problem on one of the early Dev phones. Then the solution was to drain the battery then do a series of longer and longer charges.
However my suggestion now is to autoload an OS and see if it get's you past the problem.
If you can't even get to the boot rom stage to install the OS, then come back and I'll dig out what the solution was mentioned above.
Autoloader info can be found here...
http://supportforums.blackberry.com/t5/General-BlackBerry-10-Smartphone/How-to-Reload-your-Blackberr...
If you've been helped click on , if you've been saved buy the app.
Developer of stokLocker, Sympatico and Super Sentences.

Flashing LED problem

Similar Messages

Maybe you are looking for